When the call to hw_params for a component fails, the error code is held
by the variable '__ret' but the error message displays the value held by
the variable 'ret'. Fix the return code shown when hw_params fails for
a component.

Fixes: b8135864 ("ASoC: snd_soc_component_driver has snd_pcm_ops")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

In asynchronous mode, a RxFS and RxClk connection needs to be made between
two ports. Add a define for the bit to be set in the *SEL fields.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
[m.felsch@pengutronix.de: fixed comment to include i.MX21 and 35]
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

All conditionally-defined routines in include/sound/soc.h expose a
static inline fallback to avoid 0-day warnings and compilation issues,
except snd_soc_new_compress().

Fixes: 5db6aab6 ('ASoC: topology: Add support for compressed PCMs')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support for the Atmel I2S controller embedded into
sama5d2x SoCs.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds DT bindings for the new Atmel I2S controller embedded
inside sama5d2x SoCs.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds TX and RX TDM mixers for 40 TDM ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

All the mixer controls are pretty much same from all the afe ports.

Make these as proper macros for 2 reasons.

1> To avoid any typos in adding new mixer controls for each port.
2> Easy to edit from single place, easy to add new ports

This also prepares the routing driver to accomdate 40 tdm dais.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to 40 TDM ports supported in AFE.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Use common q6afe_dai_prepare() for MI2S dais, this will remove
some code duplication. Also make the if statement to switch to
make the code look neater.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to tdm ports in AFE.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds bindings required for TDM ports on AFE.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

We should set BE symmetric constraint on FE substream.

in case one BE is used by two FE1/FE2,
the first BE runtime will use FE1's substream->runtime.
hence the FE1's will be constrained by BE symmetry property.

Though, second FE2 call dpcm_apply_symmetry,
the be_substream->runtime == FE1's substream->runtime.
The FE2's substream->runtime will not be constrained
by BE's symmetry property.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

In case, one BE is used by two FE1/FE2
FE1--->BE-->
       |
FE2----]
when FE1/FE2 call dpcm_be_dai_hw_free() together
the BE users will be 2 (> 1), hence cannot be hw_free
the be state will leave at, ex. SND_SOC_DPCM_STATE_STOP

later FE1/FE2 call dpcm_be_dai_shutdown(),
will be skip due to wrong state.
leaving the BE not being hw_free and shutdown.

The BE dai will be hw_free later when calling
dpcm_be_dai_shutdown() if still in invalid state.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

channel 1: SYSMEM<->ACP
channel 2: ACP<->I2S
Instead of waiting on period interrupt of ch 2 and then starting
dma on ch1, we make ch1 dma as circular.
This removes dependency of period granularity on hw pointer.
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add a quirk for the ARCHOS 80 Cesium 8" windows tablet, this device mostly
works with the default settings, except that it has only one speaker.
So add a quirk with the default settings + the mono-speaker flag.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

In MediaTek SoC chip we have multiple DAI,
such as I2S, ADDA, PCM, etc.

Organize each DAI in to one sub dai,
with its dai driver, controls, widgets, routes.

add mtk_afe_combine_sub_dai() to combine
dai driver from each DAI.

add mtk_afe_add_sub_dai_control() to register
the control, widget, routes to component.
Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The newly introduced driver causes a harmless Kconfig warning when
compile-testing random configurations:

WARNING: unmet direct dependencies detected for SND_SDMA_SOC
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && DMA_OMAP [=n]
  Selected by [y]:
  - SND_OMAP_SOC [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && (ARCH_OMAP [=y] && DMA_OMAP [=n] || ARM [=y] && COMPILE_TEST [=y])

By simply allow build testing without DMA_OMAP, we can shut up that warning.

Fixes: dde637f2 ("ASoC: omap: Introduce the generic_dmaengine_pcm based sdma-pcm")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

The nau8824 codec can detect whether a headset or plain headphones is
inserted (as well as button presses on the headset) as such the jack_type
passed to snd_soc_card_jack_new() should include SND_JACK_MICROPHONE.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

some monitors care about the parity bit in the sub-frame of I2S,
but the cdn-dp always set this bit to "1", so these monitors
do not have sound output if use i2s, use spdif can fix this issue.
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

"The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model."

Do as suggested in the bindings examples.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

According to Devicetree Specification v0.2 document:

"The name of a node should be somewhat generic, reflecting the function
of the device and not its precise programming model."

Do as suggested in the bindings examples.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

FOr platforms that use the simple-card driver, the codec cannot be selected
through 'select' magic in Kconfig. So turn this into a real config option.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This is needed when the codec is instanciated from from a device tree.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

There's no need to read the register again prior to writing it, we did
that in the beginning of the function.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

The pxa-ssp driver currently assumes that .set_fmt() is called before
.set_clkdiv(), .set_pll() etc.

Commit a8bd0ee5 ("ASoC: raumfeld: Use static DAI format setup") broke
support for Raumfeld hardware (and possible other PXA based ones) because
it effectively changed the order of these calls. Also, as the call to
.set_fmt() is now done at probe time, the port clock is not yet enabled.

To fix this, strip all hardware register access code from the .set_fmt()
callback and memorize the desired value, so we can use it from the
.hw_params() callback. Also make the .set_fmt() callback less destructive
by reading all registers that it writes to in the beginning and only
masking out the bits that it possibly fiddles with.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to DB820c machine driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Add devicetree bindings documentation file for Qualcomm apq8096 sound card.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to q6asm dai driver which configures Q6ASM streams
to pass pcm data.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to q6afe backend dais driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch add support to MI2S mixers required to select path between
ASM stream and AFE ports.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to SLIMBus related mixers to control mux between
ASM stream and AFE port.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to q6 routing driver which configures route
between ASM and AFE module using ADM apis.

This driver uses dapm widgets to setup the matrix between AFE ports and
ASM streams.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to open, write and media format commands
in the q6asm module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to memory map and unmap regions commands in
q6asm module.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds basic support to Q6 ASM (Audio Stream Manager) module on
Q6DSP. ASM supports up to 8 concurrent streams. each stream can be setup
as playback/capture. ASM provides top control functions like
Pause/flush/resume for playback and record. ASM can Create/destroy encoder,
decoder and also provides POPP dynamic services.

This patch adds support to basic features to allow hdmi playback.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch adds support to Q6ADM (Audio Device Manager) module in
q6dsp. ADM performs routing between audio streams and AFE ports.
It does Rate matching for streams going to devices driven by
different clocks, it handles volume ramping, Mixing with channel
and bit-width. ADM creates and destroys dynamic COPP services
for device-related audio processing as needed.

This patch adds basic support to ADM.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-and-tested-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

With in ACP, There are three I2S controllers can be
configured/enabled ( I2S SP, I2S MICSP, I2S BT).
Default enabled I2S controller instance is I2S SP.
This patch provides required changes to support I2S BT
controller Instance.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Marking snd_soc_ops instances const
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>