The timer registers of aclint don't follow the clint layout and can
be mapped on any different offset. As sg2042 uses separated timer
and mswi for its clint, it should follow the aclint spec and have
separated registers.

The previous patch introduced a new type of T-HEAD aclint timer which
has clint timer layout. Although it has the clint timer layout, it
should follow the aclint spec and uses the separated mtime and mtimecmp
regs. So a ABI change is needed to make the timer fit the aclint spec.

To make T-HEAD aclint timer more closer to the aclint spec, use
regs-names to represent the mtimecmp register, which can avoid hack
for unsupport mtime register of T-HEAD aclint timer.

Also, as T-HEAD aclint only supports mtimecmp, it is unnecessary to
implement the whole aclint spec. To make this binding T-HEAD specific,
only add reg-name for existed register. For details, see the discussion
in the last link.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Fixes: 4734449f ("dt-bindings: timer: Add Sophgo sg2042 CLINT timer")
Link: https://lists.infradead.org/pipermail/opensbi/2023-October/005693.html
Link: https://github.com/riscv/riscv-aclint/blob/main/riscv-aclint.adoc
Link: https://lore.kernel.org/all/IA1PR20MB4953F9D77FFC76A9D236922DBBB6A@IA1PR20MB4953.namprd20.prod.outlook.com/Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/IA1PR20MB49531ED1BCC00D6B265C2D10BB86A@IA1PR20MB4953.namprd20.prod.outlook.com

When no timer is queued into an empty timer base, the next_expiry will not
be updated. It was originally calculated as

  base->clk + NEXT_TIMER_MAX_DELTA

When the timer base stays empty long enough (> NEXT_TIMER_MAX_DELTA), the
next_expiry value of the empty base suggests that there is a timer pending
soon. This might be more a kind of a theoretical problem, but the fix
doesn't hurt.

Use only base->next_expiry value as nextevt when timers are
pending. Otherwise nextevt will be jiffies + NEXT_TIMER_MAX_DELTA. As all
information is in place, update base->next_expiry value of the empty timer
base as well.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-13-anna-maria@linutronix.de

To improve readability of the code, split base->idle calculation and
expires calculation into separate parts. While at it, update the comment
about timer base idle marking.

Thereby the following subtle change happens if the next event is just one
jiffy ahead and the tick was already stopped: Originally base->is_idle
remains true in this situation. Now base->is_idle turns to false. This may
spare an IPI if a timer is enqueued remotely to an idle CPU that is going
to tick on the next jiffy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-12-anna-maria@linutronix.de

There is an already existing function for forwarding the timer
base. Forwarding the timer base is implemented directly in
get_next_timer_interrupt() as well.

Remove the code duplication and invoke __forward_timer_base() instead.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-11-anna-maria@linutronix.de

Forwarding timer base is done when the next expiry value is calculated and
when a new timer is enqueued. When the next expiry value is calculated the
jiffies value is already available and does not need to be reread a second
time.

Splitting out the forward timer base functionality to make it executable
via both contextes - those where jiffies are already known and those, where
jiffies need to be read.

No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-10-anna-maria@linutronix.de

The current check whether a forward of the timer base is required can be
simplified by using an already existing comparison function which is easier
to read. The related comment is outdated and was not updated when the check
changed in commit 36cd28a4 ("timers: Lower base clock forwarding
threshold").

Use time_before_eq() for the check and replace the comment by copying the
comment from the same check inside get_next_timer_interrupt(). Move the
precious information of the outdated comment to the proper place in
__run_timers().

No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-9-anna-maria@linutronix.de

Both call sites of __next_timer_interrupt() store the return value directly
in base->next_expiry. Move the store into __next_timer_interrupt() and to
make its purpose more clear, rename the function to next_expiry_recalc().

No functional change.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-8-anna-maria@linutronix.de

Deferrable timers do not prevent CPU from going idle and are not taken into
account on idle path. Sending an IPI to a remote CPU when a new first
deferrable timer was enqueued will wake up the remote CPU but nothing will
be done regarding the deferrable timers.

Drop IPI completely when a new first deferrable timer was enqueued.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-7-anna-maria@linutronix.de

When debugging timer code the timer tracepoints are very important. There
is no tracepoint when the is_idle flag of the timer base changes. Instead
of always adding manually trace_printk(), add tracepoints which can be
easily enabled whenever required.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-6-anna-maria@linutronix.de

For starting a timer, the timer is enqueued into a bucket of the timer
wheel. The bucket expiry is the defacto expiry of the timer but it is not
equal the timer expiry because of increasing granularity when bucket is in
a higher level of the wheel. To be able to figure out in a trace whether a
timer expired in time or not, the bucket expiry time is required as well.

Add bucket expiry time to the timer_start tracepoint and thereby simplify
the arguments.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-5-anna-maria@linutronix.de

When the next tick is in the past, the delta between basemono and the next
tick gets negativ. But the next tick should never be in the past. The
negative effect of a wrong next tick might be a stop of the tick and timers
might expire late.

To prevent expensive debugging when changing underlying code, add a
WARN_ON_ONCE into this code path. To prevent complete misbehaviour, also
reset next_tick to basemono in this case.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-4-anna-maria@linutronix.de

tick_nohz_stop_tick() contains the expires (u64 variable) and tick
(ktime_t) variable. In the beginning the value of expires is written to
tick. Afterwards none of the variables is changed. They are only used for
checks.

Drop the not required variable tick and use always expires instead.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-3-anna-maria@linutronix.de

When referencing functions in comments, it might be helpful to use full
function names (including the prefix) to be able to find it when grepping.
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20231201092654.34614-2-anna-maria@linutronix.de

This function is defined globally in clocksource.c and used conditionally
in clockevent.c, which the declaration hidden when clockevent support
is disabled. This causes a harmless warning in the definition:

kernel/time/clocksource.c:1324:9: warning: no previous prototype for 'sysfs_get_uname' [-Wmissing-prototypes]
 1324 | ssize_t sysfs_get_uname(const char *buf, char *dst, size_t cnt)

Move the declaration out of the #ifdef so it is always visible.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20231108125843.3806765-5-arnd@kernel.org

Merge tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix section mismatch warning messages for riscv and loongarch

 - Remove CONFIG_IA64 left-over from linux/export-internal.h

 - Fix the location of the quotes for UIMAGE_NAME

 - Fix a memory leak bug in Kconfig

* tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix memory leak from range properties
  kbuild: Move the single quotes for image name
  linux/export: clean up the IA-64 KSYM_FUNC macro
  modpost: fix section mismatch message for RELA

Pull irq fix from Borislav Petkov:

 - Flush the translation service tables to prevent unpredictable
   behavior on non-coherent GIC devices

* tag 'irq_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Flush ITS tables correctly in non-coherent GIC designs

Pull x86 fixes from Borislav Petkov:

 - Ignore invalid x2APIC entries in order to not waste per-CPU data

 - Fix a back-to-back signals handling scenario when shadow stack is in
   use

 - A documentation fix

 - Add Kirill as TDX maintainer

* tag 'x86_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/acpi: Ignore invalid x2APIC entries
  x86/shstk: Delay signal entry SSP write until after user accesses
  x86/Documentation: Indent 'note::' directive for protocol version number note
  MAINTAINERS: Add Intel TDX entry

Pull timer fix from Borislav Petkov:

 - Do the push of pending hrtimers away from a CPU which is being
   offlined earlier in the offlining process in order to prevent a
   deadlock

* tag 'timers_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimers: Push pending hrtimers away from outgoing CPU earlier

Pull scheduler fixes from Borislav Petkov:

 - Fix virtual runtime calculation when recomputing a sched entity's
   weights

 - Fix wrongly rejected unprivileged poll requests to the cgroup psi
   pressure files

 - Make sure the load balancing is done by only one CPU

* tag 'sched_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix the decision for load balance
  sched: psi: fix unprivileged polling against cgroups
  sched/eevdf: Fix vruntime adjustment on reweight

Pull locking fix from Borislav Petkov:

 - Fix a hardcoded futex flags case which lead to one robust futex test
   failure

* tag 'locking_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Fix hardcoded flags

Pull perf fix from Borislav Petkov:

 - Make sure the context refcount is transferred too when migrating perf
   events

* tag 'perf_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix cpuctx refcounting

Pull SCSI fixes from James Bottomley:
 "Seven small fixes, six in drivers and one in sd.

  The sd fix is so large because it changes a struct pointer to a struct
  but otherwise is fairly simple"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: qcom-ufs: dt-bindings: Document the SM8650 UFS Controller
  scsi: sd: Fix sshdr use in sd_suspend_common()
  scsi: scsi_debug: Delete some bogus error checking
  scsi: scsi_debug: Fix some bugs in sdebug_error_write()
  scsi: ufs: core: Fix racing issue between ufshcd_mcq_abort() and ISR
  scsi: ufs: core: Expand MCQ queue slot to DeviceQueueDepth + 1
  scsi: qla2xxx: Fix system crash due to bad pointer access

Pull parisc fixes from Helge Deller:
 "On parisc we still sometimes need writeable stacks, e.g. if programs
  aren't compiled with gcc-14. To avoid issues with the upcoming
  systemd-254 we therefore have to disable prctl(PR_SET_MDWE) for now
  (for parisc only).

  The other two patches are minor: a bugfix for the soft power-off on
  qemu with 64-bit kernel and prefer strscpy() over strlcpy():

   - Fix power soft-off on qemu

   - Disable prctl(PR_SET_MDWE) since parisc sometimes still needs
     writeable stacks

   - Use strscpy instead of strlcpy in show_cpuinfo()"

* tag 'parisc-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  prctl: Disable prctl(PR_SET_MDWE) on parisc
  parisc/power: Fix power soft-off when running on qemu
  parisc: Replace strlcpy() with strscpy()

Pull xfs fixes from Chandan Babu:

 - Fix deadlock arising due to intent items in AIL not being cleared
   when log recovery fails

 - Fix stale data exposure bug when remapping COW fork extents to data
   fork

 - Fix deadlock when data device flush fails

 - Fix AGFL minimum size calculation

 - Select DEBUG_FS instead of XFS_DEBUG when XFS_ONLINE_SCRUB_STATS is
   selected

 - Fix corruption of log inode's extent count field when NREXT64 feature
   is enabled

* tag 'xfs-6.7-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: recovery should not clear di_flushiter unconditionally
  xfs: inode recovery does not validate the recovered inode
  xfs: fix again select in kconfig XFS_ONLINE_SCRUB_STATS
  xfs: fix internal error from AGFL exhaustion
  xfs: up(ic_sema) if flushing data device fails
  xfs: only remap the written blocks in xfs_reflink_end_cow_extent
  XFS: Update MAINTAINERS to catch all XFS documentation
  xfs: abort intent items when recovery intents fail
  xfs: factor out xfs_defer_pending_abort

Pull nfsd fixes from Chuck Lever:

 - Fix several long-standing bugs in the duplicate reply cache

 - Fix a memory leak

* tag 'nfsd-6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Fix checksum mismatches in the duplicate reply cache
  NFSD: Fix "start of NFS reply" pointer passed to nfsd_cache_update()
  NFSD: Update nfsd_cache_append() to use xdr_stream
  nfsd: fix file memleak on client_opens_release

Pull smb client fixes from Steve French:

 - multichannel fixes (including a lock ordering fix and an important
   refcounting fix)

 - spnego fix

* tag '6.7-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix lock ordering while disabling multichannel
  cifs: fix leak of iface for primary channel
  cifs: fix check of rc in function generate_smb3signingkey
  cifs: spnego: add ';' in HOST_KEY_LEN

systemd-254 tries to use prctl(PR_SET_MDWE) for it's MemoryDenyWriteExecute
functionality, but fails on parisc which still needs executable stacks in
certain combinations of gcc/glibc/kernel.

Disable prctl(PR_SET_MDWE) by returning -EINVAL for now on parisc, until
userspace has catched up.
Signed-off-by: Helge Deller <deller@gmx.de>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Sam James <sam@gentoo.org>
Closes: https://github.com/systemd/systemd/issues/29775Tested-by: Sam James <sam@gentoo.org>
Link: https://lore.kernel.org/all/875y2jro9a.fsf@gentoo.org/
Cc: <stable@vger.kernel.org> # v6.3+

Merge tag 'for-6.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Various fixes for the DM delay target to address regressions
   introduced during the 6.7 merge window

 - Fixes to both DM bufio and the verity target for no-sleep mode,
   to address sleeping while atomic issues

 - Update DM crypt target in response to the treewide change that
   made MAX_ORDER inclusive

* tag 'for-6.7/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm-crypt: start allocating with MAX_ORDER
  dm-verity: don't use blocking calls from tasklets
  dm-bufio: fix no-sleep mode
  dm-delay: avoid duplicate logic
  dm-delay: fix bugs introduced by kthread mode
  dm-delay: fix a race between delay_presuspend and delay_bio

Firmware returns the physical address of the power switch,
so need to use gsc_writel() instead of direct memory access.

Fixes: d0c21947 ("parisc/power: Add power soft-off when running on qemu")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+

strlcpy() reads the entire source buffer first. This read may exceed
the destination size limit. This is both inefficient and can lead
to linear read overflows if a source string is not NUL-terminated[1].
Additionally, it returns the size of the source string, not the
resulting size of the destination string. In an effort to remove strlcpy()
completely[2], replace strlcpy() here with strscpy().

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [1]
Link: https://github.com/KSPP/linux/issues/89 [2]
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Azeem Shaikh <azeemshaikh38@gmail.com>
Cc: linux-parisc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull i2c fixes from Wolfram Sang:
 "Revert a not-working conversion to generic recovery for PXA,
  use proper IO accessors for designware, and use proper PM level
  for ocores to allow accessing interrupt providers late"

* tag 'i2c-for-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: ocores: Move system PM hooks to the NOIRQ phase
  i2c: designware: Fix corrupted memory seen in the ISR
  Revert "i2c: pxa: move to generic GPIO recovery"

Pull turbostat updates from Len Brown:

 - Turbostat features are now table-driven (Rui Zhang)

 - Add support for some new platforms (Sumeet Pawnikar, Rui Zhang)

 - Gracefully run in configs when CPUs are limited (Rui Zhang, Srinivas
   Pandruvada)

 - misc minor fixes

[ This came in during the merge window, but sorting out the signed tag
  took a while, so thus the late merge   - Linus ]

* tag 'turbostat-2023.11.07' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (86 commits)
  tools/power turbostat: version 2023.11.07
  tools/power/turbostat: bugfix "--show IPC"
  tools/power/turbostat: Add initial support for LunarLake
  tools/power/turbostat: Add initial support for ArrowLake
  tools/power/turbostat: Add initial support for GrandRidge
  tools/power/turbostat: Add initial support for SierraForest
  tools/power/turbostat: Add initial support for GraniteRapids
  tools/power/turbostat: Add MSR_CORE_C1_RES support for spr_features
  tools/power/turbostat: Move process to root cgroup
  tools/power/turbostat: Handle cgroup v2 cpu limitation
  tools/power/turbostat: Abstrct function for parsing cpu string
  tools/power/turbostat: Handle offlined CPUs in cpu_subset
  tools/power/turbostat: Obey allowed CPUs for system summary
  tools/power/turbostat: Obey allowed CPUs for primary thread/core detection
  tools/power/turbostat: Abstract several functions
  tools/power/turbostat: Obey allowed CPUs during startup
  tools/power/turbostat: Obey allowed CPUs when accessing CPU counters
  tools/power/turbostat: Introduce cpu_allowed_set
  tools/power/turbostat: Remove PC7/PC9 support on ADL/RPL
  tools/power/turbostat: Enable MSR_CORE_C1_RES on recent Intel client platforms
  ...

Pull bcachefs fixes from Kent Overstreet:
 "Lots of small fixes for minor nits and compiler warnings.

  Bigger items:

   - The six locks lost wakeup is finally fixed: six_read_trylock() was
     checking for the waiting bit before decrementing the number of
     readers - validated the fix with a torture test.

   - Fix for a memory reclaim issue: when needing to reallocate a key
     cache key, we now do our usual GFP_NOWAIT; unlock(); GFP_KERNEL
     dance.

   - Multiple deleted inodes btree fixes

   - Fix an issue in fsck, where i_nlink would be recalculated
     incorrectly for hardlinked files if a snapshot had ever been taken.

   - Kill journal pre-reservations: This is a bigger patch than I would
     normally send at this point, but it deletes code and it fixes some
     of our tests that would sporadically die with the journal getting
     stuck, and it's a performance improvement, too"

* tag 'bcachefs-2023-11-17' of https://evilpiepirate.org/git/bcachefs: (22 commits)
  bcachefs: Fix missing locking for dentry->d_parent access
  bcachefs: six locks: Fix lost wakeup
  bcachefs: Fix no_data_io mode checksum check
  bcachefs: Fix bch2_check_nlinks() for snapshots
  bcachefs: Don't decrease BTREE_ITER_MAX when LOCKDEP=y
  bcachefs: Disable debug log statements
  bcachefs: Fix missing transaction commit
  bcachefs: Fix error path in bch2_mount()
  bcachefs: Fix potential sleeping during mount
  bcachefs: Fix iterator leak in may_delete_deleted_inode()
  bcachefs: Kill journal pre-reservations
  bcachefs: Check for nonce offset inconsistency in data_update path
  bcachefs: Make sure to drop/retake btree locks before reclaim
  bcachefs: btree_trans->write_locked
  bcachefs: Run btree key cache shrinker less aggressively
  bcachefs: Split out btree_key_cache_types.h
  bcachefs: Guard against insufficient devices to create stripes
  bcachefs: Fix null ptr deref in bch2_backpointer_get_node()
  bcachefs: Fix multiple -Warray-bounds warnings
  bcachefs: Use DECLARE_FLEX_ARRAY() helper and fix multiple -Warray-bounds warnings
  ...

Merge tag 'mm-hotfixes-stable-2023-11-17-14-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Thirteen hotfixes. Seven are cc:stable and the remainder pertain to
  post-6.6 issues or aren't considered suitable for backporting"

* tag 'mm-hotfixes-stable-2023-11-17-14-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: more ptep_get() conversion
  parisc: fix mmap_base calculation when stack grows upwards
  mm/damon/core.c: avoid unintentional filtering out of schemes
  mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors
  mm/damon/sysfs-schemes: handle tried region directory allocation failure
  mm/damon/sysfs-schemes: handle tried regions sysfs directory allocation failure
  mm/damon/sysfs: check error from damon_sysfs_update_target()
  mm: fix for negative counter: nr_file_hugepages
  selftests/mm: add hugetlb_fault_after_madv to .gitignore
  selftests/mm: restore number of hugepages
  selftests: mm: fix some build warnings
  selftests: mm: skip whole test instead of failure
  mm/damon/sysfs: eliminate potential uninitialized variable warning

Pull block fix from Jens Axboe:
 "Just a single fix from Christoph/Ming, fixing a case where integrity
  IO could be called without having an appropriate queue reference"

* tag 'block-6.7-2023-11-17' of git://git.kernel.dk/linux:
  blk-mq: make sure active queue usage is held for bio_integrity_prep()

Pull io_uring fix from Jens Axboe:
 "Just a single fixup for a change we made in this release, which caused
  a regression in sometimes missing fdinfo output if the SQPOLL thread
  had the lock held when fdinfo output was retrieved.

  This brings us back on par with what we had before, where just the
  main uring_lock will prevent that output. We'd love to get rid of that
  too, but that is beyond the scope of this release and will have to
  wait for 6.8"

* tag 'io_uring-6.7-2023-11-17' of git://git.kernel.dk/linux:
  io_uring/fdinfo: remove need for sqpoll lock for thread/pid retrieval

Pull drm fixes from Daniel Vetter:
 "This is a 'blast from the bast' fixes pull, because it contains a
  bunch of AGP fixes for amdgpu. Otherwise nothing out of the ordinary.

  Next week is back to Dave unless he's knocked out by some conference
  bug.

   - amdgpu: fixes all over, including a set of AGP fixes

   - nouvea: GSP + other bugfixes

   - ivpu build fix

   - lenovo legion go panel orientation quirk"

* tag 'drm-fixes-2023-11-17' of git://anongit.freedesktop.org/drm/drm: (30 commits)
  drm/amdgpu/gmc9: disable AGP aperture
  drm/amdgpu/gmc10: disable AGP aperture
  drm/amdgpu/gmc11: disable AGP aperture
  drm/amdgpu: add a module parameter to control the AGP aperture
  drm/amdgpu/gmc11: fix logic typo in AGP check
  drm/amd/display: Fix encoder disable logic
  drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox
  drm/amdgpu: add and populate the port num into xgmi topology info
  drm/amd/display: Negate IPS allow and commit bits
  drm/amd/pm: Don't send unload message for reset
  drm/amdgpu: fix ras err_data null pointer issue in amdgpu_ras.c
  drm/amd/display: Clear dpcd_sink_ext_caps if not set
  drm/amd/display: Enable fast plane updates on DCN3.2 and above
  drm/amd/display: fix NULL dereference
  drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer()
  drm/amd/display: Add null checks for 8K60 lightup
  drm/amd/pm: Fill pcie error counters for gpu v1_4
  drm/amd/pm: Update metric table for smu v13_0_6
  drm/amdgpu: correct chunk_ptr to a pointer to chunk.
  drm/amd/display: Fix DSC not Enabled on Direct MST Sink
  ...

nfsd_cache_csum() currently assumes that the server's RPC layer has
been advancing rq_arg.head[0].iov_base as it decodes an incoming
request, because that's the way it used to work. On entry, it
expects that buf->head[0].iov_base points to the start of the NFS
header, and excludes the already-decoded RPC header.

These days however, head[0].iov_base now points to the start of the
RPC header during all processing. It no longer points at the NFS
Call header when execution arrives at nfsd_cache_csum().

In a retransmitted RPC the XID and the NFS header are supposed to
be the same as the original message, but the contents of the
retransmitted RPC header can be different. For example, for krb5,
the GSS sequence number will be different between the two. Thus if
the RPC header is always included in the DRC checksum computation,
the checksum of the retransmitted message might not match the
checksum of the original message, even though the NFS part of these
messages is identical.

The result is that, even if a matching XID is found in the DRC,
the checksum mismatch causes the server to execute the
retransmitted RPC transaction again.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

The "statp + 1" pointer that is passed to nfsd_cache_update() is
supposed to point to the start of the egress NFS Reply header. In
fact, it does point there for AUTH_SYS and RPCSEC_GSS_KRB5 requests.

But both krb5i and krb5p add fields between the RPC header's
accept_stat field and the start of the NFS Reply header. In those
cases, "statp + 1" points at the extra fields instead of the Reply.
The result is that nfsd_cache_update() caches what looks to the
client like garbage.

A connection break can occur for a number of reasons, but the most
common reason when using krb5i/p is a GSS sequence number window
underrun. When an underrun is detected, the server is obliged to
drop the RPC and the connection to force a retransmit with a fresh
GSS sequence number. The client presents the same XID, it hits in
the server's DRC, and the server returns the garbage cache entry.

The "statp + 1" argument has been used since the oldest changeset
in the kernel history repo, so it has been in nfsd_dispatch()
literally since before history began. The problem arose only when
the server-side GSS implementation was added twenty years ago.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>