From: Russell King <rmk@arm.linux.org.uk>

This patch carries forward the following bug fix from MTD CVS, which causes a
lot of noise after a suspend/resume cycle on ARM devices.

revision 1.127
date: 2003/07/02 20:29:38;  author: acurtis;  state: Exp;  lines: +2 -1
Added FL_STATUS to the FL_READY case in put_chip(). (Eliminate noise)

From: "Jose R. Santos" <jrsantos@austin.ibm.com>

It alleviates some issues seen with Linux when accessing millions of files on
machines with large amounts of RAM (+32GB).  Both algorithms are base on some
studies that Dominique Heger was doing on hash table efficiencies in Linux.
The dentry hash table has been tested in small systems with one internal IDE
hard disk as well as in large SMP with many fiberchanel disks.  Dominique
claims that in all the testing done, they did not see one case were this has
function provided worst performance and that in most test they were seeing
better performance.

The inode hash function was done by me base on Dominique's original work and
has only been stress tested with SpecSFS.  It provided a 3% improvement over
the default algorithm in the SpecSFS results and speed ups in the response
time of almost all filesystem operations the benchmark stress.  With the
better distribution is as also possible to reduce the number of inode buckets
for 32 million to 16 million and still get a slightly better results.

Anton was nice enough to provide some graphs that show the distribution 
before and after the patch at http://samba.org/~anton/linux/sfs/1/

For the dentry hash function, some of my other coorkers had put this hash
function through various testing and have concluded that the hash function was
equal or better than the default hash function.  These runs were done with a
(hopefully to be Open Source soon) benchmark called FFSB which can simulate
various io patters across many filesystems and variable file sizes.

SpecSFS fileset is basically a lot of small file which varies depending on the
size of the run.  For a not so big SMP system the number of file is in the +20
Million files range.  Of those 20 million files only 10% are access randomly
by the client.  The purpose of this is that the benchmark tries to stress not
only the NFS layer but, VM and Filesystems layers as well.  The filesets are
also hundreds of gigabytes in size in order to promote disk head movement by
guaranteeing cache misses in memory.  SFS 27% of the workload are lookups
__d_lookup has showing high in my profiles.

For the inode hash the problem that I see is that when running a benchmark
with this huge fileset we end up trying to free a lot of inode entries during
the run while trying to put new entries in cache.  We end up calling
ifind_fast() which calls find_inodes_fast() held under inode_lock.  In order
to avoid holding the inode_lock we needed to avoid having long chains in that
hash function.

When I took a look at the original hash function, I found it to be a bit to
simple for any workload.  My solution (which I took advantage of Dominique's
work) was to create a hash that function that could generate completely
different hashes depending on the hashval and the superblock in order to have
the hash scale as we added more filesystems to the machine.

Both of these problems can be somewhat tuned out by increasing the number of
buckets of both d and i cache but it got to a point were I had 256MB of inode
and 128MB in dentry hash buckets on a not so large SMP.  With the hash changes
I have been able to reduce the number of buckets to 128MB for inode cache and
to 32MB for dentry cache and still get better performance.

If it help my case...  I haven't been running this benchmark for long, so I
haven't been able to find a way to cheat.  I need to come up with generic
solutions until I can find a cheat for the benchmark.  :)


SDET results:

Steve Pratt seem to have a SDET setup already and he did me the favor of
running SDET with a reduce dentry entry hash table size.  I belive that
his table suggest that less than 3% change is acceptable variability, but
overall he got a 5% better number using the new hash algorith.

A) x4408way1.sdet.2.6.5100000-8p.04-05-05_12.08.44 vs 
B) x4408way1.sdet.2.6.5+hash-100000-8p.04-05-05_11.48.02


  Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  Inode-cache hash table entries: 1048576 (order: 10, 4194304 bytes) 

Results:Throughput

                                          tolerance = 0.00 + 3.00% of A
                      A            B
   Threads      Ops/sec      Ops/sec    %diff         diff    tolerance
----------- ------------ ------------ -------- ------------ ------------
         1    4341.9300    4401.9500     1.38        60.02       130.26 
         2    8242.2000    8165.1200    -0.94       -77.08       247.27 
         4   15274.4900   15257.1000    -0.11       -17.39       458.23 
         8   21326.9200   21320.7000    -0.03        -6.22       639.81 
        16   23056.2100   24282.8000     5.32      1226.59       691.69  * 
        32   23397.2500   24684.6100     5.50      1287.36       701.92  * 
        64   23372.7600   23632.6500     1.11       259.89       701.18 
       128   17009.3900   16651.9600    -2.10      -357.43       510.28 
=========================================================================

From: C.L. Tien <cltien@cmedia.com.tw>

Current version from cmedia.

From: Matt Domsch <Matt_Domsch@dell.com>

Clean up the edd.c driver.

* use kobject_set_name() instead of snprintf() per GregKH's recommendation.
* Add MODULE_VERSION()
* s/driverfs/sysfs/ in Kconfig
* Remove report URL message, as there have been too many BIOSs reported,
  virtually none of which are EDD-capable.  This may return if/when I
  develop a better reporting method and database to capture/store the
  data from users.
* Remove the unused code for creating a symlink to the scsi_device.
  This never worked right, and I'm going to show the relationship from
  a userspace tool which uses libsysfs instead.

kblockd is the thread which runs unplug functions, not keventd.

From: Rusty Russell <rusty@rustcorp.com.au>

Only print the tainted message the first time.  Its purpose is to warn
users that we can't support them, not to fill their logs.

From: Paul Mackerras <paulus@samba.org>

The patch below moves the ppc64 spinlocks and rwlocks out of line and into
arch/ppc64/lib/locks.c, and implements _raw_spin_lock_flags for ppc64.

Part of the motivation for moving the spinlocks and rwlocks out of line was
that I needed to add code to the slow paths to yield the processor to the
hypervisor on systems with shared processors.  On these systems, a cpu as
seen by the kernel is a virtual processor that is not necessarily running
full-time on a real physical cpu.  If we are spinning on a lock which is
held by another virtual processor which is not running at the moment, we
are just wasting time.  In such a situation it is better to do a hypervisor
call to ask it to give the rest of our time slice to the lock holder so
that forward progress can be made.

The one problem with out-of-line spinlock routines is that lock contention
will show up in profiles in the spin_lock etc.  routines rather than in the
callers, as it does with inline spinlocks.  I have added a CONFIG_SPINLINE
config option for people that want to do profiling.  In the longer term, Anton
is talking about teaching the profiling code to attribute samples in the spin
lock routines to the routine's caller.

This patch reduces the kernel by about 80kB on my G5.  With inline
spinlocks selected, the kernel gets about 4kB bigger than without the
patch, because _raw_spin_lock_flags is slightly bigger than _raw_spin_lock.

This patch depends on the patch from Keith Owens to add
_raw_spin_lock_flags.

From: Keith Owens <kaos@sgi.com>

As requested by Linus, update all architectures to add the common
infrastructure.  Tested on ia64 and i386.

Enable interrupts while waiting for a disabled spinlock, but only if
interrupts were enabled before issuing spin_lock_irqsave().

This patch consists of three sections :-

* An architecture independent change to call _raw_spin_lock_flags()
  instead of _raw_spin_lock() when the flags are available.

* An ia64 specific change to implement _raw_spin_lock_flags() and to
  define _raw_spin_lock(lock) as _raw_spin_lock_flags(lock, 0) for the
  ASM_SUPPORTED case.

* Patches for all other architectures and for ia64 with !ASM_SUPPORTED
  to map _raw_spin_lock_flags(lock, flags) to _raw_spin_lock(lock).
  Architecture maintainers can define _raw_spin_lock_flags() to do
  something useful if they want to enable interrupts while waiting for
  a disabled spinlock.

From: Alexey Dobriyan <adobriyan@mail.ru>

Fix various kernel-doc parameters.

From: Alexey Dobriyan <adobriyan@mail.ru>

  DOCPROC Documentation/DocBook/parportbook.sgml
Warning(drivers/parport/share.c:188): No description found for parameter 'drv'
(kernel-doc parameter name is incorrect.)

From: Greg Aumann <Greg_Aumann@sil.org>

This patch updates two error messages to reflect changes in the code.

From: "Theodore Ts'o" <tytso@mit.edu>

This patch versus improves the output produced by "echo 1 >
/proc/sys/vm/block_dump", in the following ways:

1) The messages are printed with KERN_DEBUG, so that even if sysklogd is
   running, if configured appropriately, it will not need to write to log
   files.

2) The inode which is dirtied by a process is now identified more
   precisely by inode number and filesystem ID, and by a dcache name if
   present.

3) In the generic filesystem sget function, the superblock id (s_id) is
   filled in with the filesystem type by default.  Filesystems which are
   block-device based will override s_id, but this allows pseudo
   filesystems such as tmpfs, procfs, etc.  to be identified in (2).

find_user() is being called from set/get_priority(), but it doesn't take the
needed lock, and those callers were forgetting to drop the refcount which
find_user() took.

From: Olaf Hering <olh@suse.de>

From: Chris Mason <mason@suse.com>

From: Jeff Mahoney <jeffm@suse.com>

Add device info to the various reiserfs warnings and panics so you can tell
which filesystem triggers the message.  Loosely based on code from Oleg
Drokin.

From: Chris Mason <mason@suse.com>

From: jeffm@suse.com

reiserfs permission bug fix for xattrs

From: Chris Mason <mason@suse.com>

ReiserFS support for quotas.  Originally from Jan Kara

From: Chris Mason <mason@suse.com>

From: jeffm@suse.com

reiserfs xattr locking fixes

From: Chris Mason <mason@suse.com>

From: jeffm@suse.com

reiserfs support for selinux

From: Chris Mason <mason@suse.com>

From: jeffm@suse.com

reiserfs support for trusted xattrs

From: Chris Mason <mason@suse.com>

From: jeffm@suse.com

reiserfs acl support

From: Chris Mason <mason@suse.com>

From: jeffm@suse.com

reiserfs support for xattrs

From: Chris Mason <mason@suse.com>

From: jeffm@suse.com

properly init device inodes in the acl code

From: Bart Samwel <bart@samwel.tk>

This patch from Micha Feigin fixes some bugs in the earlier reiserfs 
commit default patch. The changelog:

* If you remounted without any commit=NNN option, it would assume commit=0
  and restore the defaults.  This patch makes it leave the current state alone
  if you don't pass commit=NNN.

* Added range check for cast from unsigned long to unsigned int.

From: FabF <Fabian.Frederick@skynet.be>

Use the pre-existing enum rather than magic numbers.

From: Burton Windle <bwindle@fint.org>

Fix the 3c905C 10/100 transceiver initialisation woes.

Currently, shrink_slab() will decide that it needs to scan a certain number of
dentries, will call shrink_dcache_memory() requesting that this be done, and
shrink_dcache_memory() will simply bale out without doing anything because the
caller did not have __GFP_FS.

This has the potential to disrupt our lovely pagecache-vs-slab balancing act. 
So change things so that shrinker callouts can return -1, indicating that they
baled out.  This way, shrink_slab can remember that this slab was owed a
certain number of scannings and these will be correctly performed next time a
__GFP_FS caller comes by.

From: Andi Kleen <ak@suse.de>

We still need some kind of early CPU detection, e.g.  for the AMD768
workaround and for the slab allocator to size its slabs correctly for the
cache line.  Also some other code already had private early CPU routines.

This patch takes a new approach compared to the previous patch which caused
Andrew so much grief.  It only fills in a few selected fields in
boot_cpu_data (only the data needed to identify the CPU type and the cache
alignment).  In particular the feature masks are not filled in, and the
other fields are also not touched to prevent unwanted side effects.

Also convert the ppro workaround to use standard cpu data now. 

I'm not sure if slab still has the necessary support to use the cache line
size early; previously Manfred showed some serious memory saving with this
for kernels that are compiled for a bigger cache line size than the CPU (is
often the case on distribution kernels).  This code could be reenable now
with this patch.

From: Anton Blanchard <anton@samba.org>

Found a few warnings when compiling with NAPI off.

From: Coywolf Qi Hunt <coywolf@greatcn.org>

Since "Direct booting from floppy is no longer supported", this patch is
remove the bootsect_helper code from x86_64 and PC-9800.

From: Coywolf Qi Hunt <coywolf@greatcn.org>

Since "Direct booting from floppy is no longer supported", this patch is to
remove the bootsect_helper code.  And also a comment fix.

The other two platforms x86_64 and PC-9800 should also be cleaned up too.

From: "Prof. BJ" <prof.bj@freemail.hu>

- m8xx_setup warning and mfmsr error fix
- ppc8xx_pic include error fix
- tqm8xxl.c typeing (syntax) error fix
- commproc.c include error and prototype warning fix

(acked by Matt Porter)

From: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com>

The patch fixes a problem with ES7000 Server Management mechanism that uses
platform register mip_port.  It was not initialized, so the mechanism was not
functional.

The patch also fixes the APIC destination for hierarchical and flat cluster
models used in ES7000.  The destination ID's reflect policies for Cascade
based systems which use logical delivery and lowest priority mechanism, and
for xAPIC based models that use physical delivery and fixed APIC destinations.

The patch also turns on NO_IOAPIC_CHECK (1) to avoid error messages and
attempts to re-write the ID, because on ES7000 all ID's are hard coded in the
BIOS and cannot be altered.

From: Arnd Bergmann <arnd@arndb.de>

sys32_nfsservctl is the largest remaining syscall emulation handler that can
be consolidated.  mips and ia64 currently don't use this at all, parisc has a
simpler implementation than the one used by s390, sparc ppc and that the new
compat_sys_nfsservctl is based on.

The user access checks in the code are inconsistant at least, which should be
fixed here.

Compile tested only due to lack of proper test setup.

From: Arnd Bergmann <arnd@arndb.de>

sys32_select has seven mostly but not exactly identical versions, so
consolidate them as compat_sys_select.  Based on the ppc64 implementation,
which most closely resembles sys_select.  One bug that was not caught by LTP
has been fixed since the first version of this patch.

tested x86_64, ia64 and s390.

From: Arnd Bergmann <arnd@arndb.de>

The code for sys32_execve/do_execve32 in most of the seven versions was copied
from fs/exec.c but not kept up-to-date.  The new compat_do_execve() function
is based on the mips code and has been resync'ed with do_execve().  IA64
changes are from Arun Sharma.

Tested on x86_64, ia64 and s390

From: Arnd Bergmann <arnd@arndb.de>

The seven implementations of this have gone out of sync and are mostly buggy. 
The new compat_sys_* version is based on the ppc64 implementation, which most
closely resembles the code in sys_readv/sys_writev.

Tested on x86_64, ia64 and s390.

From: Nick Piggin <nickpiggin@yahoo.com.au>

Without disturbing the read/write ratio, increase the bathc expiry
intervals.  This wil have the effect of increasing latency a little, but
with improved throughput.

From: <bart@samwel.tk>

Richard Atterer reported that mutt does not play well with noatime (it uses
access times to check whether new mail has arrived in a folder).  This patch
warns about this in the doc, and adds a setting to the control script to
disable the noatime remount.

From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>