1. 04 May, 2023 1 commit
  2. 03 May, 2023 26 commits
  3. 01 May, 2023 11 commits
    • David S. Miller's avatar
      Merge branch 'rxrpc-timeout-fixes' · fb7cba61
      David S. Miller authored
      David Howells says:
      
      ====================
      rxrpc: Timeout handling fixes
      
      Here are three patches to fix timeouts handling in AF_RXRPC:
      
       (1) The hard call timeout should be interpreted in seconds, not
           milliseconds.
      
       (2) Allow a waiting call to be aborted (thereby cancelling the call) in
           the case a signal interrupts sendmsg() and leaves it hanging until it
           is granted a channel on a connection.
      
       (3) Kernel-generated calls get the timer started on them even if they're
           still waiting to be attached to a connection.  If the timer expires
           before the wait is complete and a conn is attached, an oops will
           occur.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      fb7cba61
    • David Howells's avatar
      rxrpc: Fix timeout of a call that hasn't yet been granted a channel · db099c62
      David Howells authored
      afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may
      get stalled in the background waiting for a connection to become
      available); it then calls rxrpc_kernel_set_max_life() to set the timeouts -
      but that starts the call timer so the call timer might then expire before
      we get a connection assigned - leading to the following oops if the call
      stalled:
      
      	BUG: kernel NULL pointer dereference, address: 0000000000000000
      	...
      	CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701
      	RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157
      	...
      	Call Trace:
      	 <TASK>
      	 rxrpc_send_ACK+0x50/0x13b
      	 rxrpc_input_call_event+0x16a/0x67d
      	 rxrpc_io_thread+0x1b6/0x45f
      	 ? _raw_spin_unlock_irqrestore+0x1f/0x35
      	 ? rxrpc_input_packet+0x519/0x519
      	 kthread+0xe7/0xef
      	 ? kthread_complete_and_exit+0x1b/0x1b
      	 ret_from_fork+0x22/0x30
      
      Fix this by noting the timeouts in struct rxrpc_call when the call is
      created.  The timer will be started when the first packet is transmitted.
      
      It shouldn't be possible to trigger this directly from userspace through
      AF_RXRPC as sendmsg() will return EBUSY if the call is in the
      waiting-for-conn state if it dropped out of the wait due to a signal.
      
      Fixes: 9d35d880 ("rxrpc: Move client call connection to the I/O thread")
      Reported-by: default avatarMarc Dionne <marc.dionne@auristor.com>
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      cc: "David S. Miller" <davem@davemloft.net>
      cc: Eric Dumazet <edumazet@google.com>
      cc: Jakub Kicinski <kuba@kernel.org>
      cc: Paolo Abeni <pabeni@redhat.com>
      cc: linux-afs@lists.infradead.org
      cc: netdev@vger.kernel.org
      cc: linux-kernel@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      db099c62
    • David Howells's avatar
      rxrpc: Make it so that a waiting process can be aborted · 0eb362d2
      David Howells authored
      When sendmsg() creates an rxrpc call, it queues it to wait for a connection
      and channel to be assigned and then waits before it can start shovelling
      data as the encrypted DATA packet content includes a summary of the
      connection parameters.
      
      However, sendmsg() may get interrupted before a connection gets assigned
      and further sendmsg() calls will fail with EBUSY until an assignment is
      made.
      
      Fix this so that the call can at least be aborted without failing on
      EBUSY.  We have to be careful here as sendmsg() mustn't be allowed to start
      the call timer if the call doesn't yet have a connection assigned as an
      oops may follow shortly thereafter.
      
      Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
      Reported-by: default avatarMarc Dionne <marc.dionne@auristor.com>
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      cc: "David S. Miller" <davem@davemloft.net>
      cc: Eric Dumazet <edumazet@google.com>
      cc: Jakub Kicinski <kuba@kernel.org>
      cc: Paolo Abeni <pabeni@redhat.com>
      cc: linux-afs@lists.infradead.org
      cc: netdev@vger.kernel.org
      cc: linux-kernel@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0eb362d2
    • David Howells's avatar
      rxrpc: Fix hard call timeout units · 0d098d83
      David Howells authored
      The hard call timeout is specified in the RXRPC_SET_CALL_TIMEOUT cmsg in
      seconds, so fix the point at which sendmsg() applies it to the call to
      convert to jiffies from seconds, not milliseconds.
      
      Fixes: a158bdd3 ("rxrpc: Fix timeout of a call that hasn't yet been granted a channel")
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      cc: Marc Dionne <marc.dionne@auristor.com>
      cc: "David S. Miller" <davem@davemloft.net>
      cc: Eric Dumazet <edumazet@google.com>
      cc: Jakub Kicinski <kuba@kernel.org>
      cc: Paolo Abeni <pabeni@redhat.com>
      cc: linux-afs@lists.infradead.org
      cc: netdev@vger.kernel.org
      cc: linux-kernel@vger.kernel.org
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0d098d83
    • Tom Rix's avatar
      net: atlantic: Define aq_pm_ops conditionally on CONFIG_PM · 4f163bf8
      Tom Rix authored
      For s390, gcc with W=1 reports
      drivers/net/ethernet/aquantia/atlantic/aq_pci_func.c:458:32: error:
        'aq_pm_ops' defined but not used [-Werror=unused-const-variable=]
        458 | static const struct dev_pm_ops aq_pm_ops = {
            |                                ^~~~~~~~~
      
      The only use of aq_pm_ops is conditional on CONFIG_PM.
      The definition of aq_pm_ops and its functions should also
      be conditional on CONFIG_PM.
      Signed-off-by: default avatarTom Rix <trix@redhat.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4f163bf8
    • Andy Moreton's avatar
      sfc: Fix module EEPROM reporting for QSFP modules · 281900a9
      Andy Moreton authored
      The sfc driver does not report QSFP module EEPROM contents correctly
      as only the first page is fetched from hardware.
      
      Commit 0e1a2a3e ("ethtool: Add SFF-8436 and SFF-8636 max EEPROM
      length definitions") added ETH_MODULE_SFF_8436_MAX_LEN for the overall
      size of the EEPROM info, so use that to report the full EEPROM contents.
      
      Fixes: 9b17010d ("sfc: Add ethtool -m support for QSFP modules")
      Signed-off-by: default avatarAndy Moreton <andy.moreton@amd.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      281900a9
    • David S. Miller's avatar
      Merge branch 'r8152-fixes' · f858e2fd
      David S. Miller authored
      Hayes Wang says:
      
      ====================
      r8152: fix 2.5G devices
      
      v3:
      For patch #2, modify the comment.
      
      v2:
      For patch #1, Remove inline for fc_pause_on_auto() and fc_pause_off_auto(),
      and update the commit message.
      
      For patch #2, define the magic value for OCP register 0xa424.
      
      v1:
      These patches are used to fix some issues of RTL8156.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f858e2fd
    • Hayes Wang's avatar
      r8152: move setting r8153b_rx_agg_chg_indicate() · cce8334f
      Hayes Wang authored
      Move setting r8153b_rx_agg_chg_indicate() for 2.5G devices. The
      r8153b_rx_agg_chg_indicate() has to be called after enabling tx/rx.
      Otherwise, the coalescing settings are useless.
      
      Fixes: 195aae32 ("r8152: support new chips")
      Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cce8334f
    • Hayes Wang's avatar
      r8152: fix the poor throughput for 2.5G devices · 61b0ad6f
      Hayes Wang authored
      Fix the poor throughput for 2.5G devices, when changing the speed from
      auto mode to force mode. This patch is used to notify the MAC when the
      mode is changed.
      
      Fixes: 195aae32 ("r8152: support new chips")
      Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
      Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      61b0ad6f
    • Hayes Wang's avatar
      r8152: fix flow control issue of RTL8156A · 8ceda6d5
      Hayes Wang authored
      The feature of flow control becomes abnormal, if the device sends a
      pause frame and the tx/rx is disabled before sending a release frame. It
      causes the lost of packets.
      
      Set PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY to zeros before disabling the
      tx/rx. And, toggle FC_PATCH_TASK before enabling tx/rx to reset the flow
      control patch and timer. Then, the hardware could clear the state and
      the flow control becomes normal after enabling tx/rx.
      
      Besides, remove inline for fc_pause_on_auto() and fc_pause_off_auto().
      
      Fixes: 195aae32 ("r8152: support new chips")
      Signed-off-by: default avatarHayes Wang <hayeswang@realtek.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      8ceda6d5
    • Victor Nogueira's avatar
      net/sched: act_mirred: Add carrier check · 526f28bd
      Victor Nogueira authored
      There are cases where the device is adminstratively UP, but operationally
      down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps)
      who's cable was pulled out, here is its ip link output:
      
      5: ens2f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
          link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff
          altname enp179s0f1np1
      
      As you can see, it's administratively UP but operationally down.
      In this case, sending a packet to this port caused a nasty kernel hang (so
      nasty that we were unable to capture it). Aborting a transmit based on
      operational status (in addition to administrative status) fixes the issue.
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Acked-by: default avatarJamal Hadi Salim <jhs@mojatatu.com>
      Signed-off-by: default avatarVictor Nogueira <victor@mojatatu.com>
      v1->v2: Add fixes tag
      v2->v3: Remove blank line between tags + add change log, suggested by Leon
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      526f28bd
  4. 28 Apr, 2023 2 commits