- 11 Aug, 2007 14 commits
-
-
Gabriel C authored
Signed-off-by:
Gabriel Craciunescu <nix.or.die@googlemail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexey Dobriyan authored
After /proc/sys rewrite it was left unused. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Lee Schermerhorn authored
Misplaced #endif is hiding the numa_zonelist_order sysctl when !SECURITY. Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Mel Gorman <mel@csn.ul.ie> Signed-off-by:
-
Ryusuke Konishi authored
When ecryptfs_lookup() is called against special files, eCryptfs generates the following errors because it tries to treat them like regular eCryptfs files. Error opening lower file for lower_dentry [0xffff810233a6f150], lower_mnt [0xffff810235bb4c80], and flags [0x8000] Error opening lower_file to read header region Error attempting to read the [user.ecryptfs] xattr from the lower file; return value = [-95] Valid metadata not found in header region or xattr region; treating file as unencrypted For instance, the problem can be reproduced by the steps below. # mkdir /root/crypt /mnt/crypt # mount -t ecryptfs /root/crypt /mnt/crypt # mknod /mnt/crypt/c0 c 0 0 # umount /mnt/crypt # mount -t ecryptfs /root/crypt /mnt/crypt # ls -l /mnt/crypt This patch fixes it by adding a check similar to directories and symlinks. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by:
Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
David Howells authored
Connect up the fallocate() system call. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Paul A. Clarke authored
This builds upon my previous attempts to resolve some jitter problems seen with the Matrox G450 and G550 -based cards, including odd disparities observed between x86 and Power -based machines in a somewhat less hackish way (removing the hacked ifdefs). Apparently, preference should be given to use the DVI PLL when frequencies permit, the Standard PLL otherwise. The max pixel clock for the panellink interface is extracted from the PInS information on the card and used as a limit to determine which PLL to use. Signed-off-by:
Paul A. Clarke <pc@us.ibm.com> Acked-by:
Petr Vandrovec <petr@vandrovec.name> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
-
Adrian McMenamin authored
The current version is very old and does not correctly specify how to set the video mode. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by:
-
Adrian McMenamin authored
- better handling of the pvr2 registers based on more up to date information. Testing shows that it seems to work pretty well at 16bpp, 24bpp and 32bpp - including proper rendering of the boot logo at all levels (previously this was a bit broken even at 16bpp) and giving white against black text. Really detailed testing (eg with X11) requires support for the maple bus - which isn't (currently - next project assuming this is okay) available, but I have no reason to think this is broken. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Acked-by:
Paul Mundt <lethal@linux-sh.org> Signed-off-by:
-
Antonino A. Daplas authored
Reported by: Adrian McMenamin <adrianmcmenamin@gmail.com> This driver will oops when the pseudo_palette[] is written as u32 but not when written as u16. When written as u32, it corrupts the adjacent 'mmio_base' field of struct pvr2fb_par. Fix by using framebuffer_alloc()/release() to allocate struct fb_info and struct pvr2fb_par, and create the pseudo_palette[] as part of struct pvr2fb_par. Signed-off-by:
-
Antonino A. Daplas authored
Fix compile warning ('map_override unused') if fbcon is compiled as a module and CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=n. [akpm@linux-foundation.org: cleanup] Signed-off-by: -
Helge Deller authored
Visualize-EG, Graffiti and A4450A graphics cards on PARISC can be configured in double-buffer and standard mode, but the stifb driver supports standard mode only. This patch detects double-buffered cards more reliable. It is a real bugfix for a very nasty problem for all parisc users which have wrongly configured their graphic card. The problem: The stifb graphics driver will not detect that the card is wrongly configured and then nevertheless just enables the graphics mode, which it shouldn't. In the end, the user will see no further updates / boot messages on the screen. We had documented this problem already on our FAQ (http://parisc-linux.org/faq/index.html#viseg "Why do I get corrupted graphics with my Vis-EG/Graffiti/A4450A card?") but people still run into this problem. So having this fix in as early as possible can help us. Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Badari Pulavarty authored
Need to initialize map_bh.b_state to zero. Otherwise, in case of a faulty user-buffer its possible to go into dio_zero_block() and submit a page by mistake - since it checks for buffer_new(). http://marc.info/?l=linux-kernel&m=118551339032528&w=2 akpm: Linus had a (better) patch to just do a kzalloc() in there, but it got lost. Probably this version is better for -stable anwyay. Signed-off-by:
Badari Pulavarty <pbadari@us.ibm.com> Acked-by:
Joe Jin <joe.jin@oracle.com> Acked-by:
Zach Brown <zach.brown@oracle.com> Cc: gurudas pai <gurudas.pai@oracle.com> Cc: <stable@kernel.org> Signed-off-by:
-
Robin Holt authored
I have had four seperate system lockups attributable to this exact problem in two days of testing. Instead of trying to handle all the weird end cases and wrap, how about changing it to look for exactly what we appear to want. The following patch removes a couple races in setup_APIC_timer. One occurs when the HPET advances the COUNTER past the T0_CMP value between the time the T0_CMP was originally read and when COUNTER is read. This results in a delay waiting for the counter to wrap. The other results from the counter wrapping. This change takes a snapshot of T0_CMP at the beginning of the loop and simply loops until T0_CMP has changed (a tick has happened). <later> I have one small concern about the patch. I am not sure it meets the intent as well as it should. I think we are trying to match APIC timer interrupts up with the hpet counter increment. The event which appears to be disturbing this loop in our test environment is the NMI watchdog. What we believe has been happening with the existing code is the setup_APIC_timer loop has read the CMP value, and the NMI watchdog code fires for the first time. This results in a series of icache miss slowdowns and by the time we get back to things it has wrapped. I think this code is trying to get the CMP as close to the counter value as possible. If that is the intent, maybe we should really be testing against a "window" around the CMP. Something like COUNTER = CMP+/2. It appears COUNTER should get advanced every 89nSec (IIRC). The above seems like an unreasonably small window, but may be necessary. Without documentation, I am not sure of the original intent with this code. In summary, this code fixes my boot hangs, but since I am not certain of the intent of the existing code, I am not certain this has not introduced new bugs or unexpected behaviors. Signed-off-by:
Robin Holt <holt@sgi.com> Acked-by:
Andi Kleen <ak@suse.de> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: "Aaron Durbin" <adurbin@google.com> Signed-off-by:
-
Bryan Wu authored
Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Bryan Wu <bryan.wu@analog.com> Signed-off-by:
-
- 10 Aug, 2007 3 commits
-
-
Jesper Juhl authored
There's a little problem in Documentation/vm/slabinfo.c The code is using "%d" in a printf() call to print an 'unsigned long'. This patch corrects it to use "%lu" instead. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
Christoph Lameter <clameter@sgi.com>
-
Christoph Lameter authored
The dynamic dma kmalloc creation can run into trouble if a GFP_ATOMIC allocation is the first one performed for a certain size of dma kmalloc slab. - Move the adding of the slab to sysfs into a workqueue (sysfs does GFP_KERNEL allocations) - Do not call kmem_cache_destroy() (uses slub_lock) - Only acquire the slub_lock once and--if we cannot wait--do a trylock. This introduces a slight risk of the first kmalloc(x, GFP_DMA|GFP_ATOMIC) for a range of sizes failing due to another process holding the slub_lock. However, we only need to acquire the spinlock once in order to establish each power of two DMA kmalloc cache. The possible conflict is with the slub_lock taken during slab management actions (create / remove slab cache). It is rather typical that a driver will first fill its buffers using GFP_KERNEL allocations which will wait until the slub_lock can be acquired. Drivers will also create its slab caches first outside of an atomic context before starting to use atomic kmalloc from an interrupt context. If there are any failures then they will occur early after boot or when loading of multiple drivers concurrently. Drivers can already accomodate failures of GFP_ATOMIC for other reasons. Retries will then create the slab. Signed-off-by: -
Christoph Lameter authored
The MAX_PARTIAL checks were supposed to be an optimization. However, slab shrinking is a manually triggered process either through running slabinfo or by the kernel calling kmem_cache_shrink. If one really wants to shrink a slab then all operations should be done regardless of the size of the partial list. This also fixes an issue that could surface if the number of partial slabs was initially above MAX_PARTIAL in kmem_cache_shrink and later drops below MAX_PARTIAL through the elimination of empty slabs on the partial list (rare). In that case a few slabs may be left off the partial list (and only be put back when they are empty). Signed-off-by:
-
- 09 Aug, 2007 23 commits
-
-
Alan Cox authored
UIO currently contains a rather dubious statement which wants removing. The actual questions around whether user space code that depends tightly on kernel GPL code designed to co-work with it are derivative works of the kernel is extremely complex, and since we don't have space for either a masters length essay on legal issues or need to start flamewars lets simply remove the comment and leave law to lawyers Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Linus Torvalds <tovalds@linux-foundation.org>
-
Richard Henderson authored
The default definition in asm-generic conflicts with Alpha's O_DIRECT, so, like several other arches, it needs to be redefined. Signed-off-by:
Richard Hendersion <rth@twiddle.net> Signed-off-by:
-
git://git.linux-nfs.org/pub/linux/nfs-2.6Linus Torvalds authored
* git://git.linux-nfs.org/pub/linux/nfs-2.6: SUNRPC: Replace flush_workqueue() with cancel_work_sync() and friends NFS: Replace flush_scheduled_work with cancel_work_sync() and friends SUNRPC: Don't call gss_delete_sec_context() from an rcu context NFSv4: Don't call put_rpccred() from an rcu callback NFS: Fix NFSv4 open stateid regressions NFSv4: Fix a locking regression in nfs4_set_mode_locked() NFS: Fix put_nfs_open_context SUNRPC: Fix a race in rpciod_down()
-
Artem Bityutskiy authored
Trivial fix: mark the buffer to hexdump as const so callers could avoid casting their const buffers when calling print_hex_dump(). The patch is really trivial and I suggest to consider it as a fix (it fixes GCC warnings) and push it to current tree. Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [TCP]: H-TCP maxRTT estimation at startup [NETFILTER]: nf_nat: add symbolic dependency on IPv4 conntrack [NETFILTER]: ctnetlink: return EEXIST instead of EINVAL for existing nat'ed conntracks [NETFILTER]: ipt_recent: avoid a possible NULL pointer deref in recent_seq_open() [NET] net/core/utils: fix sparse warning [NetLabel]: add missing rcu_dereference() calls in the LSM domain mapping hash table [PATCH] mac80211: don't allow scanning in monitor mode [PATCH] mac80211: Fix sparse error for sta_last_seq_ctrl_read [PATCH] mac80211: use do { } while (0) for multi-line macros [PATCH] mac80211: missing dev_put in ieee80211_master_start_xmit -
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix memory leak when cpu hotplugging. [SPARC64]: Do not assume sun4v chips have load-twin/store-init support. [SPARC64]: Fix hard-coding of cpu type output in /proc/cpuinfo on sun4v. [SPARC]: Centralize find_in_proplist() instead of duplicating N times.
-
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmcLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: at91_mci: remove whitespace at the end of lines mmc: reorganize bounce buffer init wbsd: fix section mismatch warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-schedLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched: (61 commits) sched: refine negative nice level granularity sched: fix update_stats_enqueue() reniced codepath sched: round a bit better sched: make the multiplication table more accurate sched: optimize update_rq_clock() calls in the load-balancer sched: optimize activate_task() sched: clean up set_curr_task_fair() sched: remove __update_rq_clock() call from entity_tick() sched: move the __update_rq_clock() call to scheduler_tick() sched debug: remove the 'u64 now' parameter from print_task()/_rq() sched: remove the 'u64 now' local variables sched: remove the 'u64 now' parameter from deactivate_task() sched: remove the 'u64 now' parameter from dequeue_task() sched: remove the 'u64 now' parameter from enqueue_task() sched: remove the 'u64 now' parameter from dec_nr_running() sched: remove the 'u64 now' parameter from inc_nr_running() sched: remove the 'u64 now' parameter from dec_load() sched: remove the 'u64 now' parameter from inc_load() sched: remove the 'u64 now' parameter from update_curr_load() sched: remove the 'u64 now' parameter from ->task_new() ...
-
Ronald G. Minnich authored
Some versions of ld.so mmap the shared libraries right in over guest memory, so compile lguest statically by default. [ FC7 maps shared libraries very low, where the launcher maps guest's physical memory. Quick fix is to link Launcher static, real fix is for 2.6.24. ] -static is a simple fix. I expect this problem will be more common than we like, as different distro's make different "improvements" to ld.so Signed-off-by:
Ronald G. Minnich <rminnich@gmail.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Rusty Russell authored
If a Guest makes hypercall which sets a GDT entry to not present, we currently set any segment registers using that GDT entry to 0. Unfortunately, this is not sufficient: there are other ways of altering GDT entries which will cause a fault. The correct solution to do what Linux does: let them set any GDT value they want and handle the #GP when popping causes a fault. This has the added benefit of making our Switcher slightly more robust in the case of any other bugs which cause it to fault. We kill the Guest if it causes a fault in the Switcher: it's the Guest's responsibility to make sure it's not using segments when it changes them. Signed-off-by:
-
Rusty Russell authored
lguest uses a host-supplied wallclock-based clocksource when the TSC is not reliable. As this is already in nanoseconds, I naively used a multiplier of 1 and a shift of 0. But update_wall_time() in its infinite wisdom decides to adjust the clock a little (where does it think it's getting a more accurate time from?) It will happily tweak the multiplier... to 0, then -1. So the "fix" is to use a shift of 22 like everyone else, and a multiplier of 1 << 22. Signed-off-by:
-
Linus Torvalds authored
This reverts commit 0fc4969b. It was always meant to be temporary, but it's generating more useless noise than anything else, and we probably should never have done it in the generic kernel (only had the people involved test it on their own). Signed-off-by:
-
Nicolas Ferre authored
Some cleanup with whitespace/tab at the end of lines. Signed-off-by:
Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx>
-
Pierre Ossman authored
Reorganize the code that initializes mmc_block's bounce buffer in order to avoid warnings when MMC_BLOCK_BOUNCE isn't used. Signed-off-by: -
Gabriel C authored
This patch fixes the following section mismatch warnings ... WARNING: vmlinux.o(.init.text+0x29d40): Section mismatch: reference to .exit.text:wbsd_release_resources (between 'wbsd_init' and 'wbsd_probe') WARNING: vmlinux.o(.init.text+0x29d49): Section mismatch: reference to .exit.text:wbsd_free_mmc (between 'wbsd_init' and 'wbsd_probe') WARNING: vmlinux.o(.init.text+0x29f28): Section mismatch: reference to .exit.text:wbsd_free_mmc (between 'wbsd_init' and 'wbsd_probe') ... Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Ingo Molnar authored
refine the granularity of negative nice level tasks: let them reschedule more often to offset the effect of them consuming their wait_runtime proportionately slower. (This makes nice-0 task scheduling smoother in the presence of negatively reniced tasks.) Signed-off-by:Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
the key has to be rescaled to /weight even if it has a positive value. (this change only affects the scheduling of reniced tasks) Signed-off-by: -
Ingo Molnar authored
round a tiny bit better in high-frequency rescheduling scenarios, by rounding around zero instead of rounding down. (this is pretty theoretical though) Signed-off-by: -
Ingo Molnar authored
do small deltas in the weight and multiplication constant table so that the worst-case numeric error is better than 1:100000000. (8 digits) the current error table is: nice mult * inv_mult error ------------------------------------------ -20: 88761 * 48388 -0.0000000065 -19: 71755 * 59856 -0.0000000037 -18: 56483 * 76040 0.0000000056 -17: 46273 * 92818 0.0000000042 -16: 36291 * 118348 -0.0000000065 -15: 29154 * 147320 -0.0000000037 -14: 23254 * 184698 -0.0000000009 -13: 18705 * 229616 -0.0000000037 -12: 14949 * 287308 -0.0000000009 -11: 11916 * 360437 -0.0000000009 -10: 9548 * 449829 -0.0000000009 -9: 7620 * 563644 -0.0000000037 -8: 6100 * 704093 0.0000000009 -7: 4904 * 875809 0.0000000093 -6: 3906 * 1099582 -0.0000000009 -5: 3121 * 1376151 -0.0000000058 -4: 2501 * 1717300 0.0000000009 -3: 1991 * 2157191 -0.0000000035 -2: 1586 * 2708050 0.0000000009 -1: 1277 * 3363326 0.0000000014 0: 1024 * 4194304 0.0000000000 1: 820 * 5237765 0.0000000009 2: 655 * 6557202 0.0000000033 3: 526 * 8165337 -0.0000000079 4: 423 * 10153587 0.0000000012 5: 335 * 12820798 0.0000000079 6: 272 * 15790321 0.0000000037 7: 215 * 19976592 -0.0000000037 8: 172 * 24970740 -0.0000000037 9: 137 * 31350126 -0.0000000079 10: 110 * 39045157 -0.0000000061 11: 87 * 49367440 -0.0000000037 12: 70 * 61356676 0.0000000056 13: 56 * 76695844 -0.0000000075 14: 45 * 95443717 -0.0000000072 15: 36 * 119304647 -0.0000000009 16: 29 * 148102320 -0.0000000037 17: 23 * 186737708 -0.0000000028 18: 18 * 238609294 -0.0000000009 19: 15 * 286331153 -0.0000000002 Signed-off-by: -
Ingo Molnar authored
optimize update_rq_clock() calls in the load-balancer: update them right after locking the runqueue(s) so that the pull functions do not have to call it. Signed-off-by: -
Ingo Molnar authored
optimize activate_task() by removing update_rq_clock() from it. (and add update_rq_clock() to all callsites of activate_task() that did not have it before.) Signed-off-by: -
Ingo Molnar authored
clean up set_curr_task_fair(). ( identity transformation that causes no change in functionality. ) text data bss dec hex filename 39170 3750 36 42956 a7cc sched.o.before 39170 3750 36 42956 a7cc sched.o.after Signed-off-by: -
Ingo Molnar authored
remove __update_rq_clock() call from entity_tick(). no change in functionality because scheduler_tick() already calls __update_rq_clock(). Signed-off-by:
-
