- 30 Jan, 2017 2 commits
-
-
Peter Zijlstra authored
In commit: 659cf9f5 ("locking/ww_mutex: Optimize ww-mutexes by waking at most one waiter for backoff when acquiring the lock") I replaced a comment with a lockdep_assert_held(). However it turns out we hide that lock from lockdep for hysterical raisins, which results in the assertion always firing. Remove the old debug code as lockdep will easily spot the abuse it was meant to catch, which will make the lock visible to lockdep and make the assertion work as intended. Reported-by:
Mike Galbraith <efault@gmx.de> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicolai Haehnle <Nicolai.Haehnle@amd.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 659cf9f5 ("locking/ww_mutex: Optimize ww-mutexes by waking at most one waiter for backoff when acquiring the lock") Link: http://lkml.kernel.org/r/20170117150609.GB32474@worktopSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
Steven Rostedt (VMware) authored
Running my likely/unlikely profiler for 3 weeks on two production machines, I discovered that the unlikely() test in __rt_mutex_slowlock() checking if state is TASK_INTERRUPTIBLE is hit 100% of the time, making it a very likely case. The reason is, on a vanilla kernel, the majority case of calling rt_mutex() is from the futex code. This code is always called as TASK_INTERRUPTIBLE. In the -rt patch, this code is commonly called when PREEMPT_RT is enabled with TASK_UNINTERRUPTIBLE. But that's not the likely scenario. The rt_mutex() code should be optimized for the common vanilla case, and that is from a futex, with TASK_INTERRUPTIBLE as the state. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
- 22 Jan, 2017 1 commit
-
-
Waiman Long authored
In __rwsem_down_write_failed_common(), the same wake_q variable name is defined twice, with the inner wake_q hiding the one in outer scope. We can either use different names for the two wake_q's. Even better, we can use the same wake_q twice, if necessary. To enable the latter change, we need to define a new helper function wake_q_init() to enable reinitalization of wake_q after use. Signed-off-by:
Waiman Long <longman@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1485052415-9611-1-git-send-email-longman@redhat.comSigned-off-by:
-
- 20 Jan, 2017 1 commit
-
-
Waiman Long authored
Since sem->count had been changed to a atomic_long_t type, it is no longer necessary to use the atomic_long_t cast anymore. So remove them. Signed-off-by:
-
- 19 Jan, 2017 1 commit
-
-
Luis R. Rodriguez authored
The ending header guard is misplaced. This has no functional change, this is just an eye-sore. Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@alien8.de Cc: bp@suse.de Cc: catalin.marinas@arm.com Cc: jbaron@akamai.com Cc: pbonzini@redhat.com Cc: tony.luck@intel.com Link: http://lkml.kernel.org/r/20170118173804.16281-1-mcgrof@kernel.orgSigned-off-by:
-
- 18 Jan, 2017 1 commit
-
-
Peter Zijlstra authored
Because home-rolling your own is _awesome_, stop doing it. Provide kref_put_lock(), just like kref_put_mutex() but for a spinlock. Signed-off-by:
-
- 14 Jan, 2017 33 commits
-
-
Ingo Molnar authored
With the ww_mutex inline wrappers gone there's a lot of dormant anti-patterns emerging in an x86 allyesconfig build: kernel/locking/test-ww_mutex.c:80:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] kernel/locking/test-ww_mutex.c:55:3: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] kernel/locking/test-ww_mutex.c:134:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] kernel/locking/test-ww_mutex.c:213:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] kernel/locking/test-ww_mutex.c:177:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] kernel/locking/test-ww_mutex.c:266:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:213:19: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:213:19: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:213:19: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:213:19: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:213:19: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:213:19: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:213:19: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:213:19: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:211:20: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:211:20: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:211:20: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:211:20: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:213:19: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:211:20: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:211:20: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] lib/locking-selftest.c:211:20: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] drivers/gpu/drm/drm_modeset_lock.c:430:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c:70:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] drivers/gpu/drm/vgem/vgem_fence.c:193:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] drivers/gpu/drm/i915/i915_gem_batch_pool.c:125:4: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] drivers/gpu/drm/i915/i915_gem_execbuffer.c:1302:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] drivers/gpu/drm/radeon/radeon_prime.c:69:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] drivers/gpu/drm/nouveau/nouveau_prime.c:70:2: warning: ignoring return value of ‘ww_mutex_lock’, declared with attribute warn_unused_result [-Wunused-result] ... but we cannot just litter the kernel build log with such warnings. These need to be fixed separately - turn off the warning for now. Cc: Nicolai Hähnle <nicolai.haehnle@amd.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maarten Lankhorst <dev@mblankhorst.nl> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: -
Peter Zijlstra authored
Leak references by unbalanced get, instead of poking at kref implementation details. Signed-off-by:
-
Peter Zijlstra authored
For some obscure reason apparmor thinks its needs to locally implement kref primitives that already exist. Stop doing this. Signed-off-by:
-
Peter Zijlstra authored
By general sentiment kref_sub() is a bad interface, make it go away. Signed-off-by:
-
Peter Zijlstra authored
Since we need to change the implementation, stop exposing internals. Provide kref_read() to read the current reference count; typically used for debug messages. Kills two anti-patterns: atomic_read(&kref->refcount) kref->refcount.counter Signed-off-by:
-
Peter Zijlstra authored
Since we need to change the implementation, stop exposing internals. Provide KREF_INIT() to allow static initialization of struct kref. Signed-off-by:
-
Chris Wilson authored
Add the minimal test running (modprobe test-ww_mutex) to the kselftests CI framework. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Check that ww_mutexes can detect cyclic deadlocks (generalised ABBA cycles) and resolve them by lock reordering. Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Signed-off-by:
-
Chris Wilson authored
Although ww_mutexes degenerate into mutexes, it would be useful to torture the deadlock handling between multiple ww_mutexes in addition to torturing the regular mutexes. Signed-off-by:
-
Chris Wilson authored
From conflicting macro parameters, passing the wrong name to __MUTEX_INITIALIZER and a stray '\', #define __WW_MUTEX_INITIALIZER was very unhappy. One unnecessary change was to choose to pass &ww_class instead of implicitly taking the address of the class within the macro. Signed-off-by:
-
Nicolai Hähnle authored
Document the invariants we maintain for the wait list of ww_mutexes. Signed-off-by:
Nicolai Hähnle <Nicolai.Haehnle@amd.com> Signed-off-by:
-
Nicolai Hähnle authored
Help catch cases where mutex_lock is used directly on w/w mutexes, which otherwise result in the w/w tasks reading uninitialized data. Signed-off-by:
-
Nicolai Hähnle authored
Lock stealing is less beneficial for w/w mutexes since we may just end up backing off if we stole from a thread with an earlier acquire stamp that already holds another w/w mutex that we also need. So don't spin optimistically unless we are sure that there is no other waiter that might cause us to back off. Median timings taken of a contention-heavy GPU workload: Before: real 0m52.946s user 0m7.272s sys 1m55.964s After: real 0m53.086s user 0m7.360s sys 1m46.204s This particular workload still spends 20%-25% of CPU in mutex_spin_on_owner according to perf, but my attempts to further reduce this spinning based on various heuristics all lead to an increase in measured wall time despite the decrease in sys time. Signed-off-by:
-
Nicolai Hähnle authored
In the following scenario, thread #1 should back off its attempt to lock ww1 and unlock ww2 (assuming the acquire context stamps are ordered accordingly). Thread #0 Thread #1 --------- --------- successfully lock ww2 set ww1->base.owner attempt to lock ww1 confirm ww1->ctx == NULL enter mutex_spin_on_owner set ww1->ctx What was likely to happen previously is: attempt to lock ww2 refuse to spin because ww2->ctx != NULL schedule() detect thread #0 is off CPU stop optimistic spin return -EDEADLK unlock ww2 wakeup thread #0 lock ww2 Now, we are more likely to see: detect ww1->ctx != NULL stop optimistic spin return -EDEADLK unlock ww2 successfully lock ww2 ... because thread #1 will stop its optimistic spin as soon as possible. The whole scenario is quite unlikely, since it requires thread #1 to get between thread #0 setting the owner and setting the ctx. But since we're idling here anyway, the additional check is basically free. Found by inspection. Signed-off-by: -
Peter Zijlstra authored
Instead of inlining __mutex_lock_common() 5 times, once for each {state,ww} variant. Reduce this to two, ww and !ww. Then add __always_inline to mutex_optimistic_spin(), so that that will get inlined all 4 remaining times, for all {waiter,ww} variants. text data bss dec hex filename 6301 0 0 6301 189d defconfig-build/kernel/locking/mutex.o 4053 0 0 4053 fd5 defconfig-build/kernel/locking/mutex.o 4257 0 0 4257 10a1 defconfig-build/kernel/locking/mutex.o This reduces total text size and better separates the ww and !ww mutex code generation. Signed-off-by: -
Nicolai Hähnle authored
locking/ww_mutex: Optimize ww-mutexes by waking at most one waiter for backoff when acquiring the lock The wait list is sorted by stamp order, and the only waiting task that may have to back off is the first waiter with a context. The regular slow path does not have to wake any other tasks at all, since all other waiters that would have to back off were either woken up when the waiter was added to the list, or detected the condition before they added themselves. Median timings taken of a contention-heavy GPU workload: Without this series: real 0m59.900s user 0m7.516s sys 2m16.076s With changes up to and including this patch: real 0m52.946s user 0m7.272s sys 1m55.964s Signed-off-by:
-
Nicolai Hähnle authored
While adding our task as a waiter, detect if another task should back off because of us. With this patch, we establish the invariant that the wait list contains at most one (sleeping) waiter with ww_ctx->acquired > 0, and this waiter will be the first waiter with a context. Since only waiters with ww_ctx->acquired > 0 have to back off, this allows us to be much more economical with wakeups. Signed-off-by:
-
Nicolai Hähnle authored
Add regular waiters in stamp order. Keep adding waiters that have no context in FIFO order and take care not to starve them. While adding our task as a waiter, back off if we detect that there is a waiter with a lower stamp in front of us. Make sure to call lock_contended even when we back off early. For w/w mutexes, being first in the wait list is only stable when taking the lock without a context. Therefore, the purpose of the first flag is split into two: 'first' remains to indicate whether we want to spin optimistically, while 'handoff' indicates that we should be prepared to accept a handoff. For w/w locking with a context, we always accept handoffs after the first schedule(), to handle the following sequence of events: 1. Task #0 unlocks and hands off to Task #2 which is first in line 2. Task #1 adds itself in front of Task #2 3. Task #2 wakes up and must accept the handoff even though it is no longer first in line Signed-off-by: -
Nicolai Hähnle authored
Keep the documentation in the header file since there is no good place for it in mutex.c: there are two rather different implementations with different EXPORT_SYMBOLs for each function. Signed-off-by:
-
Nicolai Hähnle authored
We will add a new field to struct mutex_waiter. This field must be initialized for all waiters if any waiter uses the ww_use_ctx path. So there is a trade-off: Keep ww_mutex locking without a context on the faster non-use_ww_ctx path, at the cost of adding the initialization to all mutex locks (including non-ww_mutexes), or avoid the additional cost for non-ww_mutex locks, at the cost of adding additional checks to the use_ww_ctx path. We take the latter choice. It may be worth eliminating the users of ww_mutex_lock(lock, NULL), but there are a lot of them. Signed-off-by:
-
Nicolai Hähnle authored
The function will be re-used in subsequent patches. Signed-off-by:
-
Peter Zijlstra authored
While reviewing the ww_mutex patches, I noticed that it was still possible to (incorrectly) succeed for (incorrect) code like: mutex_lock(&a); mutex_lock(&a); This was possible if the second mutex_lock() would block (as expected) but then receive a spurious wakeup. At that point it would find itself at the front of the queue, request a handoff and instantly claim ownership and continue, since owner would point to itself. Avoid this scenario and simplify the code by introducing a third low bit to signal handoff pickup. So once we request handoff, unlock clears the handoff bit and sets the pickup bit along with the new owner. This also removes the need for the .handoff argument to __mutex_trylock(), since that becomes superfluous with PICKUP. In order to guarantee enough low bits, ensure task_struct alignment is at least L1_CACHE_BYTES (which seems a good ideal regardless). Signed-off-by:
-
Davidlohr Bueso authored
The use of any kind of wait queue is an overkill for pcpu-rwsems. While one option would be to use the less heavy simple (swait) flavor, this is still too much for what pcpu-rwsems needs. For one, we do not care about any sort of queuing in that the only (rare) time writers (and readers, for that matter) are queued is when trying to acquire the regular contended rw_sem. There cannot be any further queuing as writers are serialized by the rw_sem in the first place. Given that percpu_down_write() must not be called after exit_notify(), we can replace the bulky waitqueue with rcuwait such that a writer can wait for its turn to take the lock. As such, we can avoid the queue handling and locking overhead. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: dave@stgolabs.net Link: http://lkml.kernel.org/r/1484148146-14210-3-git-send-email-dave@stgolabs.netSigned-off-by:
-
Davidlohr Bueso authored
rcuwait provides support for (single) RCU-safe task wait/wake functionality, with the caveat that it must not be called after exit_notify(), such that we avoid racing with rcu delayed_put_task_struct callbacks, task_struct being rcu unaware in this context -- for which we similarly have task_rcu_dereference() magic, but with different return semantics, which can conflict with the wakeup side. The interfaces are quite straightforward: rcuwait_wait_event() rcuwait_wake_up() More details are in the comments, but it's perhaps worth mentioning at least, that users must provide proper serialization when waiting on a condition, and avoid corrupting a concurrent waiter. Also care must be taken between the task and the condition for when calling the wakeup -- we cannot miss wakeups. When porting users, this is for example, a given when using waitqueues in that everything is done under the q->lock. As such, it can remove sources of non preemptable unbounded work for realtime. Signed-off-by:
-
Davidlohr Bueso authored
This is a nasty interface and setting the state of a foreign task must not be done. As of the following commit: be628be0 ("bcache: Make gc wakeup sane, remove set_task_state()") ... everyone in the kernel calls set_task_state() with current, allowing the helper to be removed. However, as the comment indicates, it is still around for those archs where computing current is more expensive than using a pointer, at least in theory. An important arch that is affected is arm64, however this has been addressed now [1] and performance is up to par making no difference with either calls. Of all the callers, if any, it's the locking bits that would care most about this -- ie: we end up passing a tsk pointer to a lot of the lock slowpath, and setting ->state on that. The following numbers are based on two tests: a custom ad-hoc microbenchmark that just measures latencies (for ~65 million calls) between get_task_state() vs get_current_state(). Secondly for a higher overview, an unlink microbenchmark was used, which pounds on a single file with open, close,unlink combos with increasing thread counts (up to 4x ncpus). While the workload is quite unrealistic, it does contend a lot on the inode mutex or now rwsem. [1] https://lkml.kernel.org/r/1483468021-8237-1-git-send-email-mark.rutland@arm.com == 1. x86-64 == Avg runtime set_task_state(): 601 msecs Avg runtime set_current_state(): 552 msecs vanilla dirty Hmean unlink1-processes-2 36089.26 ( 0.00%) 38977.33 ( 8.00%) Hmean unlink1-processes-5 28555.01 ( 0.00%) 29832.55 ( 4.28%) Hmean unlink1-processes-8 37323.75 ( 0.00%) 44974.57 ( 20.50%) Hmean unlink1-processes-12 43571.88 ( 0.00%) 44283.01 ( 1.63%) Hmean unlink1-processes-21 34431.52 ( 0.00%) 38284.45 ( 11.19%) Hmean unlink1-processes-30 34813.26 ( 0.00%) 37975.17 ( 9.08%) Hmean unlink1-processes-48 37048.90 ( 0.00%) 39862.78 ( 7.59%) Hmean unlink1-processes-79 35630.01 ( 0.00%) 36855.30 ( 3.44%) Hmean unlink1-processes-110 36115.85 ( 0.00%) 39843.91 ( 10.32%) Hmean unlink1-processes-141 32546.96 ( 0.00%) 35418.52 ( 8.82%) Hmean unlink1-processes-172 34674.79 ( 0.00%) 36899.21 ( 6.42%) Hmean unlink1-processes-203 37303.11 ( 0.00%) 36393.04 ( -2.44%) Hmean unlink1-processes-224 35712.13 ( 0.00%) 36685.96 ( 2.73%) == 2. ppc64le == Avg runtime set_task_state(): 938 msecs Avg runtime set_current_state: 940 msecs vanilla dirty Hmean unlink1-processes-2 19269.19 ( 0.00%) 30704.50 ( 59.35%) Hmean unlink1-processes-5 20106.15 ( 0.00%) 21804.15 ( 8.45%) Hmean unlink1-processes-8 17496.97 ( 0.00%) 17243.28 ( -1.45%) Hmean unlink1-processes-12 14224.15 ( 0.00%) 17240.21 ( 21.20%) Hmean unlink1-processes-21 14155.66 ( 0.00%) 15681.23 ( 10.78%) Hmean unlink1-processes-30 14450.70 ( 0.00%) 15995.83 ( 10.69%) Hmean unlink1-processes-48 16945.57 ( 0.00%) 16370.42 ( -3.39%) Hmean unlink1-processes-79 15788.39 ( 0.00%) 14639.27 ( -7.28%) Hmean unlink1-processes-110 14268.48 ( 0.00%) 14377.40 ( 0.76%) Hmean unlink1-processes-141 14023.65 ( 0.00%) 16271.69 ( 16.03%) Hmean unlink1-processes-172 13417.62 ( 0.00%) 16067.55 ( 19.75%) Hmean unlink1-processes-203 15293.08 ( 0.00%) 15440.40 ( 0.96%) Hmean unlink1-processes-234 13719.32 ( 0.00%) 16190.74 ( 18.01%) Hmean unlink1-processes-265 16400.97 ( 0.00%) 16115.22 ( -1.74%) Hmean unlink1-processes-296 14388.60 ( 0.00%) 16216.13 ( 12.70%) Hmean unlink1-processes-320 15771.85 ( 0.00%) 15905.96 ( 0.85%) x86-64 (known to be fast for get_current()/this_cpu_read_stable() caching) and ppc64 (with paca) show similar improvements in the unlink microbenches. The small delta for ppc64 (2ms), does not represent the gains on the unlink runs. In the case of x86, there was a decent amount of variation in the latency runs, but always within a 20 to 50ms increase), ppc was more constant. Signed-off-by:
-
Davidlohr Bueso authored
This patch effectively replaces the tsk pointer dereference (which is obviously == current), to directly use get_current() macro. This is to make the removal of setting foreign task states smoother and painfully obvious. Performance win on some archs such as x86-64 and ppc64. On a microbenchmark that calls set_task_state() vs set_current_state() and an inode rwsem pounding benchmark doing unlink: == 1. x86-64 == Avg runtime set_task_state(): 601 msecs Avg runtime set_current_state(): 552 msecs vanilla dirty Hmean unlink1-processes-2 36089.26 ( 0.00%) 38977.33 ( 8.00%) Hmean unlink1-processes-5 28555.01 ( 0.00%) 29832.55 ( 4.28%) Hmean unlink1-processes-8 37323.75 ( 0.00%) 44974.57 ( 20.50%) Hmean unlink1-processes-12 43571.88 ( 0.00%) 44283.01 ( 1.63%) Hmean unlink1-processes-21 34431.52 ( 0.00%) 38284.45 ( 11.19%) Hmean unlink1-processes-30 34813.26 ( 0.00%) 37975.17 ( 9.08%) Hmean unlink1-processes-48 37048.90 ( 0.00%) 39862.78 ( 7.59%) Hmean unlink1-processes-79 35630.01 ( 0.00%) 36855.30 ( 3.44%) Hmean unlink1-processes-110 36115.85 ( 0.00%) 39843.91 ( 10.32%) Hmean unlink1-processes-141 32546.96 ( 0.00%) 35418.52 ( 8.82%) Hmean unlink1-processes-172 34674.79 ( 0.00%) 36899.21 ( 6.42%) Hmean unlink1-processes-203 37303.11 ( 0.00%) 36393.04 ( -2.44%) Hmean unlink1-processes-224 35712.13 ( 0.00%) 36685.96 ( 2.73%) == 2. ppc64le == Avg runtime set_task_state(): 938 msecs Avg runtime set_current_state: 940 msecs vanilla dirty Hmean unlink1-processes-2 19269.19 ( 0.00%) 30704.50 ( 59.35%) Hmean unlink1-processes-5 20106.15 ( 0.00%) 21804.15 ( 8.45%) Hmean unlink1-processes-8 17496.97 ( 0.00%) 17243.28 ( -1.45%) Hmean unlink1-processes-12 14224.15 ( 0.00%) 17240.21 ( 21.20%) Hmean unlink1-processes-21 14155.66 ( 0.00%) 15681.23 ( 10.78%) Hmean unlink1-processes-30 14450.70 ( 0.00%) 15995.83 ( 10.69%) Hmean unlink1-processes-48 16945.57 ( 0.00%) 16370.42 ( -3.39%) Hmean unlink1-processes-79 15788.39 ( 0.00%) 14639.27 ( -7.28%) Hmean unlink1-processes-110 14268.48 ( 0.00%) 14377.40 ( 0.76%) Hmean unlink1-processes-141 14023.65 ( 0.00%) 16271.69 ( 16.03%) Hmean unlink1-processes-172 13417.62 ( 0.00%) 16067.55 ( 19.75%) Hmean unlink1-processes-203 15293.08 ( 0.00%) 15440.40 ( 0.96%) Hmean unlink1-processes-234 13719.32 ( 0.00%) 16190.74 ( 18.01%) Hmean unlink1-processes-265 16400.97 ( 0.00%) 16115.22 ( -1.74%) Hmean unlink1-processes-296 14388.60 ( 0.00%) 16216.13 ( 12.70%) Hmean unlink1-processes-320 15771.85 ( 0.00%) 15905.96 ( 0.85%) Signed-off-by: -
Davidlohr Bueso authored
This patch effectively replaces the tsk pointer dereference (which is obviously == current), to directly use get_current() macro. This is to make the removal of setting foreign task states smoother and painfully obvious. Performance win on some archs such as x86-64 and ppc64 -- arm64 is no longer an issue. Signed-off-by:
Davidlohr Bueso <dave@stgolabs.net> Signed-off-by:
-
Davidlohr Bueso authored
This patch effectively replaces the tsk pointer dereference (which is obviously == current), to directly use get_current() macro. In this case, do_exit() always passes current to exit_mm(), hence we can simply get rid of the argument. This is also a performance win on some archs such as x86-64 and ppc64 -- arm64 is no longer an issue. Signed-off-by:
-
Waiman Long authored
This is a follow-up of commit: cfd8983f ("x86, locking/spinlocks: Remove ticket (spin)lock implementation") The static_key structure 'paravirt_ticketlocks_enabled' is now removed as it is no longer used. As a result, the init functions kvm_spinlock_init_jump() and xen_init_spinlocks_jump() are also removed. A simple build and boot test was done to verify it. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: xen-devel@lists.xenproject.org Link: http://lkml.kernel.org/r/1484252878-1962-1-git-send-email-longman@redhat.comSigned-off-by:
-
- 12 Jan, 2017 1 commit
-
-
Andy Shevchenko authored
First of all, %*ph specifier allows to dump data in hex format using the pointer to a buffer. This is suitable to use here. Besides that Thomas suggested to move it to critical level and replace __FILE__ by explicit mention of "jumplabel". Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170110164354.47372-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
