- 20 Aug, 2018 1 commit
-
-
Peter Rosin authored
The file is GPL v2 only. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 19 Aug, 2018 27 commits
-
-
Julia Lawall authored
Drop call to of_match_device, which is subsumed by the subsequent call to of_device_get_match_data. The code becomes simpler, and a temporary variable can be dropped. The semantic match that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression match; identifier i; expression x, dev, e, e1; @@ - match@i = of_match_device(x, dev); - if (match) e = of_device_get_match_data(dev); - else e = e1; + e = of_device_get_match_data(dev); + if (!e) e = e1; @@ identifier r.i; @@ - const struct of_device_id *i; ... when != i // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Himanshu Jha authored
val2 is responsible for the floating part of the number to be written to the device. We don't need the floating part while writing the oversampling ratio for BME680 since the available oversampling ratios are pure natural numbers. So, add a sanity check to make sure val2 is 0. Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marcus Folkesson authored
Add an entry for mcp3911 ADC driver and add myself and Kent Gustavsson as maintainers of this driver. Co-Developed-by: Kent Gustavsson <kent@minoris.se> Signed-off-by: Kent Gustavsson <kent@minoris.se> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marcus Folkesson authored
MCP3911 is a dual channel Analog Front End (AFE) containing two synchronous sampling delta-sigma Analog-to-Digital Converters (ADC). Co-Developed-by: Kent Gustavsson <kent@minoris.se> Signed-off-by: Kent Gustavsson <kent@minoris.se> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marcus Folkesson authored
MCP3911 is a dual channel Analog Front End (AFE) containing two synchronous sampling delta-sigma Analog-to-Digital Converters (ADC). Co-developed-by: Kent Gustavsson <kent@minoris.se> Signed-off-by: Kent Gustavsson <kent@minoris.se> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Alexandru Ardelean authored
Fixes ef89f4b9 ("iio: adxl345: Add support for the ADXL375"). This was found via static checker. After looking into the code a bit, it's unlikely that there will be a NULL dereference if the `id` object in that specific code path. However, it's safe to add a NULL (paranoid) check just to make sure and remove any uncertainties. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Colin Ian King authored
Variable max44000_alstim_shift is defined but is never used hence it is redundant and can be removed. This variable has been like this since the driver was added back in 2016. Cleans up clang warning: warning: 'max44000_alstim_shift' defined but not used [-Wunused-const-variable=] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Stefan Popa authored
This patch adds support for the adxl372 FIFO. In order to accomplish this, triggered buffers were used. The number of FIFO samples which trigger the watermark interrupt can be configured by using the buffer watermark. The FIFO format is determined by configuring the scan elements for each axis. The FIFO data is pushed to the IIO device's buffer. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Jonathan Cameron authored
regmap: Support non-incrementing registers Some devices have individual registers that don't autoincrement the register address during bulk reads but instead repeatedly read the same value, for example for monitoring GPIOs or ADCs. Add support for these.
-
Stefan Popa authored
Add the device tree binding documentation for the ADXL372 3-axis digital accelerometer. Signed-off-by: Stefan Popa <stefan.popa@analog.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Stefan Popa authored
This patch adds basic support for Analog Devices ADXL372 SPI-Bus Three-Axis Digital Accelerometer. The device is probed and configured the with some initial default values. With this basic driver, it is possible to read raw acceleration data. Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADXL372.pdfSigned-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Matthias Kaehlcke authored
Add ADC5_AMUX_THM2_100K_PU and ADC5_AMUX_THM4_100K_PU to the list of rev2 ADC channels. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Stefan Agner authored
After finding a reasonable gain, the function converts the configured gain to a gain configuration option selector enum max9611_csa_gain. Make the conversion clearly visible by using an explicit cast. This also avoids a warning seen with clang: drivers/iio/adc/max9611.c:292:16: warning: implicit conversion from enumeration type 'enum max9611_conf_ids' to different enumeration type 'enum max9611_csa_gain' [-Wenum-conversion] *csa_gain = gain_selectors[i]; ~ ^~~~~~~~~~~~~~~~~ Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marcus Folkesson authored
This is already handled by SIMPLE_DEV_PM_OPS(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marcus Folkesson authored
This is already handled by SIMPLE_DEV_PM_OPS(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Marcus Folkesson authored
This is already handled by SIMPLE_DEV_PM_OPS(). Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Michael Hennerich authored
no functional changes Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I placed the "fall through" annotation at the bottom of the case, which is what GCC is expecting to find. Addresses-Coverity-ID: 1458342 ("Missing break in switch") Addresses-Coverity-ID: 1458345 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Tomasz Duszynski authored
Compatible strings tend to follow manufacturer,model format. In case one wants to do a matching with manufacturer stripped off he can still do so since SPI/I2C core will try id_table based matching anyway. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
David Frey authored
Temperature, pressure and humidity all expose and oversampling setting that works in the same way. Provide common handling for the oversampling sysfs attributes. Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Tested-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
David Frey authored
Use the FIELD_GET macro instead of explicit mask and shift. Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Tested-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
David Frey authored
Replace hardcoded bit masks with GENMASK macro Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Tested-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
David Frey authored
Convert all defines to use "MASK" instead of a mix of "MSK" and "MASK" Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Tested-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
David Frey authored
Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Tested-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
David Frey authored
Use the full 80 char width to reduce the number of lines taken by function calls. Remove blank lines where it aids clarity by bringing together related code blocks (such as read hi and low bytes and then combine them into one value). Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Tested-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
David Frey authored
Signed-off-by: David Frey <dpfrey@gmail.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Tested-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Brian Masney authored
This patch adds support for the regulator framework to the tsl2772 driver. Driver was tested using a LG Nexus 5 (hammerhead) phone with the two regulators and on a Raspberry Pi 2 without any regulators controlling the power to the sensor. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 18 Aug, 2018 7 commits
-
-
Brian Masney authored
The Avago APDS9930 has the same register set as the TAOS/AMS TSL2772 so this patch adds the correct bindings and the appropriate LUX table values derived from the values in the datasheet. Driver was tested on a LG Nexus 5 (hammerhead) phone. avago,apds9930 datasheet: https://www.mouser.com/datasheet/2/678/avago_AV02-3190EN_DS_APDS-9930_2014-03-25[1]-1217273.pdf tsl2772 datasheet: https://ams.com/eng/content/download/291503/1066377/file/TSL2772_DS000181_2-00.pdfSigned-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Brian Masney authored
This patch adds avago,apds9930 to the tsl2772 bindings. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Brian Masney authored
This patch adds support for optionally reading the proximity led diode and current settings from device tree. This was tested using a LG Nexus 5 (hammerhead) which requires a different diode than the driver default for the IR LED. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Brian Masney authored
This patch adds the new properties amstaos,proximity-diodes and led-max-microamp to the tsl2772 driver. This patch also removes the driver from the trivial-devices.txt. Signed-off-by: Brian Masney <masneyb@onstation.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Brian Masney authored
This patch adds support for the regulator framework to the mpu6050 driver. Signed-off-by: Brian Masney <masneyb@onstation.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Siddartha Mohanadoss authored
Update QCOM ADC header file to SPDX format. Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Siddartha Mohanadoss authored
This patch adds support for QCOM SPMI PMIC5 family of ADC driver that supports hardware based offset and gain compensation. The ADC peripheral can measure both voltage and current channels whose input signal is connected to the PMIC ADC AMUX. The register set and configuration has been refreshed compared to the prior QCOM PMIC ADC family. Register ADC5 as part of the IIO framework. Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 09 Aug, 2018 1 commit
-
-
Crestez Dan Leonard authored
The regmap API usually assumes that bulk read operations will read a range of registers but some I2C/SPI devices have certain registers for which a such a read operation will return data from an internal FIFO instead. Add an explicit API to support bulk read without range semantics. Some linux drivers use regmap_bulk_read or regmap_raw_read for such registers, for example mpu6050 or bmi150 from IIO. This only happens to work because when caching is disabled a single regmap read op will map to a single bus read op (as desired). This breaks if caching is enabled and reg+1 happens to be a cacheable register. Without regmap support refactoring a driver to enable regmap caching requires separate I2C and SPI paths. This is exactly what regmap is supposed to help avoid. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 03 Aug, 2018 2 commits
-
-
Siddartha Mohanadoss authored
PMIC5 ADC has support for clients to measure voltage and current on inputs connected to the PMIC. Clients include reading voltage phone power and on board system thermistors for thermal management. ADC5 on certain PMIC has support to read battery current. This change adds documentation. Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Colin Ian King authored
fix spelling mistake in dev_err error message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
- 02 Aug, 2018 2 commits
-
-
Chao Yu authored
As Stephen Rothwell reported: "After merging the staging tree, today's linux-next build (x86_64 allmodconfig) failed like this: drivers/staging/erofs/super.c: In function 'erofs_read_super': drivers/staging/erofs/super.c:343:17: error: 'MS_RDONLY' undeclared (first use in this function); did you mean 'IS_RDONLY'? sb->s_flags |= MS_RDONLY | MS_NOATIME; ^~~~~~~~~ IS_RDONLY drivers/staging/erofs/super.c:343:17: note: each undeclared identifier is reported only once for each function it appears in drivers/staging/erofs/super.c:343:29: error: 'MS_NOATIME' undeclared (first use in this function); did you mean 'S_NOATIME'? sb->s_flags |= MS_RDONLY | MS_NOATIME; ^~~~~~~~~~ S_NOATIME drivers/staging/erofs/super.c: In function 'erofs_mount': drivers/staging/erofs/super.c:501:10: warning: passing argument 5 of 'mount_bdev' makes integer from pointer without a cast [-Wint-conversion] &priv, erofs_fill_super); ^~~~~~~~~~~~~~~~ In file included from include/linux/buffer_head.h:12:0, from drivers/staging/erofs/super.c:14: include/linux/fs.h:2151:23: note: expected 'size_t {aka long unsigned int}' but argument is of type 'int (*)(struct super_block *, void *, int)' extern struct dentry *mount_bdev(struct file_system_type *fs_type, ^~~~~~~~~~ drivers/staging/erofs/super.c:500:9: error: too few arguments to function 'mount_bdev' return mount_bdev(fs_type, flags, dev_name, ^~~~~~~~~~ In file included from include/linux/buffer_head.h:12:0, from drivers/staging/erofs/super.c:14: include/linux/fs.h:2151:23: note: declared here extern struct dentry *mount_bdev(struct file_system_type *fs_type, ^~~~~~~~~~ drivers/staging/erofs/super.c: At top level: drivers/staging/erofs/super.c:518:20: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] .mount = erofs_mount, ^~~~~~~~~~~ drivers/staging/erofs/super.c:518:20: note: (near initialization for 'erofs_fs_type.mount') drivers/staging/erofs/super.c: In function 'erofs_remount': drivers/staging/erofs/super.c:630:12: error: 'MS_RDONLY' undeclared (first use in this function); did you mean 'IS_RDONLY'? *flags |= MS_RDONLY; ^~~~~~~~~ IS_RDONLY drivers/staging/erofs/super.c: At top level: drivers/staging/erofs/super.c:640:16: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types] .remount_fs = erofs_remount, ^~~~~~~~~~~~~ Caused by various commits creating erofs in the staging tree interacting with various commits redoing the mount infrastructure in the vfs tree. I have disabed CONFIG_EROFS_FS for now:" The reason of compiling error is: Since -next collects and merges developing patches including common vfs stuff from multi-trees, but those patches didn't cover erofs, such as: ('vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled") https://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git/commit/?h=for-next&id=109b45090d7d3ce2797bb1ef7f70eead5bfe0ff3 ("vfs: Require specification of size of mount data for internal mounts") https://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs.git/commit/?h=for-next&id=0a191e4505a4f255e6513b49426213da69bf0e80 Above vfs related patches has not been merged in staging tree, if we submit those erofs patches to staging mailing list and after including them in staging-{test,nexts} tree, it can easily cause compiling error. We worked out some patches to adjust those vfs change, but now we just submit them to -next tree temporarily to avoid compiling error. For potentail conflict in between erofs and vfs changes in incoming merge window, Stephen suggested that we can disable CONFIG_EROFS_FS temporarily to pass merge window, and after that we can do restore by reenabling CONFIG_EROFS_FS and applying those fixing patches. Also Greg confirmed this solution. So, let's disable compiling erofs for a while. Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Gao Xiang <gaoxiang25@huawei.com> Reviewed-by: Gao Xiang <gaoxiang25@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Todd Poynor authored
Set default value of allow_power_save parameter to enable power save mode, which is expected to be the state usually desired. Signed-off-by: Marty Faltesek <mfaltesek@google.com> Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-