Splitting function header to multiple lines because of 80 characters per
line limit, results in ending the function call line with '('.
This leads to CHECK reported by checkpatch.pl

Move the first parameter right after the '(' in the function call line.
Align the rest of the parameters to the opening parenthesis.
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Link: https://lore.kernel.org/r/ZBhNOkQbG4ygNF98@khadija-virtual-machineSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The coding style used to limit lines to 80 characters,
which led to splitting of these function headers into multiple
lines and ends the first line with a '('.
Such splits causes checks reported by the checkpatch.

Place the function parameters of each function immediately after
'(' in a single line to align the function headers.
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Link: https://lore.kernel.org/r/20230319164520.GA125117@sumitra.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since the coding style limited the code to 80 columns per line which caused
splitting the function header into two lines resulted in the first line
ending with a '('. This caused the checkpatch error.

Place the function parameters immediately after '(' in a single
line to align the function header.
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Link: https://lore.kernel.org/r/20230317052455.GA83442@sumitra.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Initialize the module parameters, read_timeout and write_timeout once in
init().

Module parameters can only be set once and cannot be modified later, so we
don't need to evaluate them again when passing the parameters to
wait_event_interruptible_timeout().

Convert datatype of {read,write}_timeout from 'int' to 'long int' because
implicit conversion of 'long int' to 'int' in statement
'{read,write}_timeout = MAX_SCHEDULE_TIMEOUT' results in an overflow.

Change format specifier for {read,write}_timeout from %i to %li.
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Khadija Kamran <kamrankhadijadj@gmail.com>
Link: https://lore.kernel.org/r/ZBN3XAsItCiTk7CV@khadija-virtual-machineSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function bb_power_save_mode_off() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20230317065041.16635-3-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function bb_power_save_mode_on() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20230317065041.16635-2-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function vnt_get_current_tsf() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20230317064800.12276-1-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add tabs/spaces in conditional statements in to fix the
indentation.
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230314121152.GA38979@sumitra.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function dm_shadow_init() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20230312073247.9822-3-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function rtl8192_SetRFPowerState() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20230312073247.9822-2-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It's cleaner to set "j = -1;" before the if block and remove the else
statement.
Signed-off-by: Archana <craechal@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230311121253.10225-2-craechal@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

It is cleaner to use "goto free_result;" as is being followed
in rest of the implementation of writeimage function, and
remove unnecessary kfree statements.
Signed-off-by: Archana <craechal@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230311121253.10225-1-craechal@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unnecessary blank lines before a close brace
as reported by checkpatch script

"CHECK: Blank lines aren't necessary before a close brace '}'"
Signed-off-by: Menna Mahmoud <eng.mennamahmoud.mm@gmail.com>
Link: https://lore.kernel.org/r/c8fedfeca9a56dba26846a5bed56642cc694bcbe.1678899549.git.eng.mennamahmoud.mm@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a space before and after the operator, for readability.

Reported by checkpatch script:

" CHECK: spaces preferred around that '+', '<<' and '>>' ".
Signed-off-by: Menna Mahmoud <eng.mennamahmoud.mm@gmail.com>
Link: https://lore.kernel.org/r/57006c151d4d95550b987143a6650f8b3594ddea.1678899549.git.eng.mennamahmoud.mm@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function rtw_get_raw_rssi_info() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230310083449.23775-6-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function linked_info_dump() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230310083449.23775-5-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function isAllSpaceOrTab() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230310083449.23775-4-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function ParseQualifiedString() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230310083449.23775-3-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function MapCharToHexDigit() is not used anywhere, remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230310083449.23775-2-straube.linux@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants Rtl819XPHY_REG_1T2RArray with Rtl8192PciEPHY_REG_1T2RArray
to RTL8192E_PHY_REG_1T2R_ARR to improve readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/2816a10a8a534014c58e0092b78443e01a67930a.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants Rtl819XAGCTAB_Array with Rtl8192PciEAGCTAB_Array to
RTL8192E_AGCTAB_ARR to improve readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/c7ca930adb5f72daa61b15b02001d09c4a1f8f46.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants Rtl819XRadioB_Array with Rtl8192PciERadioB_Array to
RTL8192E_RADIO_B_ARR to improve readability. Fix spaces around '+' to
improve coding style.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/59af481400d5f7633bcaf7fcd95b7e5f0093fd3f.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants Rtl819XRadioA_Array with Rtl8192PciERadioA_Array to
RTL8192E_RADIO_A_ARR to improve readability. Fix spaces around '+' to
improve coding style.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/0ce85e55fd9ddd5459590d756a951809b6a1b9ee.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants Rtl819XMACPHY_Array with Rtl8192PciEMACPHY_Array to
RTL8192E_MACPHY_ARR to improve readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/6e5609e6b31892671d203c9da1a947bd42b70c37.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants Rtl819XMACPHY_Array_PG with Rtl8192PciEMACPHY_Array_PG to
RTL8192E_MACPHY_ARR_PG to improve readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/c8effbad931c1f7bcdee7245bf16bd2e85c03679.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants PHY_REG_1T2RArrayLength with PHY_REG_1T2RArrayLengthPciE to
RTL8192E_PHY_REG_1T2R_ARR_LEN to improve readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/0e24d00350bd2c6d17558ea6b6667209e15073d2.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants MACPHY_Array_PGLength with MACPHY_Array_PGLengthPciE to
RTL8192E_MACPHY_ARR_PG_LEN to improve readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/6d86257ddf3fecbf2bb104f1eeedbf09a56e0861.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants RadioB_ArrayLength with RadioB_ArrayLengthPciE to
RTL8192E_RADIO_B_ARR_LEN to improve readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/1f48c0691eb4627be81fc39d08762617a6c58a08.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants RadioA_ArrayLength with RadioA_ArrayLengthPciE to
RTL8192E_RADIO_A_ARR_LEN to improve readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/a03372c15cf1489b964d48d667f39c6e231fa190.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants MACPHY_ArrayLength with MACPHY_ArrayLengthPciE to
RTL8192E_MACPHY_ARR_LEN to improve readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/881ce5739e4237ea9a31029acaa535422d41fa5f.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Join constants AGCTAB_ArrayLength with AGCTAB_ArrayLengthPciE to
RTL8192E_AGCTAB_ARR_LEN to improve readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/98a7553403ef95609fbcb84e4cc653628b96c56c.1678814935.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function rtl92e_is_legal_rf_path that will always return 1. Reason
is that the eRFPath is always 0 for RF90_PATH_A or 1 for RF90_PATH_B but
never 2 or 3. In most usage cases this is easy to see but for the
following functions that use rtl92e_is_legal_rf_path it is more
difficult:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/b801f1f9ff3c58aedab4e3e07b2ec0a816fdf5d9.1678740713.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Replace RF90_PATH_C in test expression of the for loop with the variable
that is commonly used. This avoids false hits when searching for usage of
RF90_PATH_C and therefore improves readability.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/f9af7a3d3e608206a4aa4ba2bd377b9201111b3f.1678740713.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused priv->phy_reg_def[RF90_PATH_C].rfHSSIPara2 and
priv->phy_reg_def[RF90_PATH_D].rfHSSIPara2.
rfHSSIPara2 is used in rtl92e_set_bb_reg which is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_rf_read which is used in:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code and constants.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/186f3e59e736de6fd2111e835cdb4b633ca41bbc.1678569965.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused priv->phy_reg_def[RF90_PATH_C].rfLSSIReadBack and
priv->phy_reg_def[RF90_PATH_D].rfLSSIReadBack.
rfLSSIReadBack is used in:
_rtl92e_phy_rf_read which is used in:
rtl92e_set_rf_reg and rtl92e_get_rf_reg are used in:
rtl92e_set_bandwidth (eRFPath only for 0 and 1)
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_phy_switch_channel_step (eRFPath only for 0 and 1)
_rtl92e_dm_check_tx_power_tracking_thermal (eRFPath only for 0)
rtl92e_check_bb_and_rf is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
_rtl92e_bb_config_para_file (eRFPath only for 0)
rtl92e_config_rf_path is used in:
rtl92e_config_rf (eRFPath only for 0 and 1)
Remove dead code and constants.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/622777b394a896b6db08eb7faeb455e5cbeae93f.1678569965.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused variable rfTxIQImbalance and rfTxAFE because they are just
once set and not used. Remove unused constants.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/62453061bcf1858c23ba57bf1f279999b37b4cc3.1678569965.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused variable rfRxIQImbalance and rfRxAFE because they are just
once set and not used. Remove unused constants with commenting line.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/1d578fc962c938e76bc0df529a3c24bba7abe049.1678569965.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused variable rfAGCControl1 and rfAGCControl2 because they are
just once set and not used. Remove unused constants as well.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/0f191930597517cf88eb6effd4c20a46c99571ad.1678569965.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused variable rfHSSIPara1 and rfSwitchControl because they are
just once set and not used. Remove unused constants as well.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/5f13420ce5598d447aaad0fe43b807467e0a15bb.1678569965.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused variable rfLSSI_Select and rfTxGainStage because they are
just once set and not used. Remove unused constants as well.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/48f05998f4d2fe2df88ff14860cc8615dd72734d.1678569965.git.philipp.g.hortmann@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>