Pass the initial queue limits to blk_mq_alloc_disk and use the
blkif_set_queue_limits API to update the limits on reconnect.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240221125845.3610668-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

blkif_set_queue_limits already sets the max_sements limits, so don't do
it a second time.  Also remove a comment about a long fixe bug in
blk_mq_update_nr_hw_queues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240221125845.3610668-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The block layer now sets the discard granularity to the physical
block size default.  Take advantage of that in xen-blkfront and only
set the discard granularity if explicitly specified.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240221125845.3610668-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Currently xen-blkfront set the max discard limit to the capacity of
the device, which is suboptimal when the capacity changes.  Just set
it to UINT_MAX, which has the same effect and is simpler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Link: https://lore.kernel.org/r/20240221125845.3610668-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The SLAB_MEM_SPREAD flag is already a no-op as of 6.8-rc1, remove
its usage so we can delete it from slab. No functional change.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Link: https://lore.kernel.org/r/20240224134646.829105-1-chengming.zhou@linux.devSigned-off-by: Jens Axboe <axboe@kernel.dk>

The logic in blk_mq_complete_need_ipi() assumes SMP systems where all
CPUs have equal compute capacities and only LLC cache can make
a different on perceived performance. But this assumption falls apart on
HMP systems where LLC is shared, but the CPUs have different capacities.
Staying local then can have a big performance impact if the IO request
was done from a CPU with higher capacity but the interrupt is serviced
on a lower capacity CPU.

Use the new cpus_equal_capacity() function to check if we need to send
an IPI.

Without the patch I see the BLOCK softirq always running on little cores
(where the hardirq is serviced). With it I can see it running on all
cores.

This was noticed after the topology change [1] where now on a big.LITTLE
we truly get that the LLC is shared between all cores where as in the
past it was being misrepresented for historical reasons. The logic
exposed a missing dependency on capacities for such systems where there
can be a big performance difference between the CPUs.

This of course introduced a noticeable change in behavior depending on
how the topology is presented. Leading to regressions in some workloads
as the performance of the BLOCK softirq on littles can be noticeably
worse on some platforms.

Worth noting that we could have checked for capacities being greater
than or equal instead for equality. This will lead to favouring higher
performance always. But opted for equality instead to match the
performance of the requester without making an assumption that can lead
to power trade-offs which these systems tend to be sensitive about. If
the requester would like to run faster, it's better to rely on the
scheduler to give the IO requester via some facility to run on a faster
core; and then if the interrupt triggered on a CPU with different
capacity we'll make sure to match the performance the requester is
supposed to run at.

[1] https://lpc.events/event/16/contributions/1342/attachments/962/1883/LPC-2022-Android-MC-Phantom-Domains.pdfSigned-off-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240223155749.2958009-3-qyousef@layalina.ioSigned-off-by: Jens Axboe <axboe@kernel.dk>

The new helper function is needed to help blk-mq check if it needs to
dispatch the softirq on another CPU to match the performance level the
IO requester is running at. This is important on HMP systems where not
all CPUs have the same compute capacity.
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240223155749.2958009-2-qyousef@layalina.ioSigned-off-by: Jens Axboe <axboe@kernel.dk>

Some of these block operations can access a significant capacity and
take longer than the user expected. A user may change their mind about
wanting to run that command and attempt to kill the process and do
something else with their device. But since the task is uninterruptable,
they have to wait for it to finish, which could be many hours.

Check for a fatal signal at each iteration so the user doesn't have to
wait for their regretted operation to complete naturally.
Reported-by: Conrad Meyer <conradmeyer@meta.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-5-kbusch@meta.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

This is the same in two places, and another will be added soon. Create a
helper for it.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-4-kbusch@meta.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use min to calculate the next number of sectors like everyone else.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-3-kbusch@meta.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Use consistent coding style in this file. All the other loops for the
same purpose use "while (nr_sects)", so they win.
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20240223155910.3622666-2-kbusch@meta.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

'open_mutex' of gendisk is used to protect open/close block devices. But
in bd_link_disk_holder(), it is used to protect the creation of symlink
between holding disk and slave bdev, which introduces some issues.

When bd_link_disk_holder() is called, the driver is usually in the process
of initialization/modification and may suspend submitting io. At this
time, any io hold 'open_mutex', such as scanning partitions, can cause
deadlocks. For example, in raid:

T1                              T2
bdev_open_by_dev
 lock open_mutex [1]
 ...
  efi_partition
  ...
   md_submit_bio
				md_ioctl mddev_syspend
				  -> suspend all io
				 md_add_new_disk
				  bind_rdev_to_array
				   bd_link_disk_holder
				    try lock open_mutex [2]
    md_handle_request
     -> wait mddev_resume

T1 scan partition, T2 add a new device to raid. T1 waits for T2 to resume
mddev, but T2 waits for open_mutex held by T1. Deadlock occurs.

Fix it by introducing a local mutex 'blk_holder_mutex' to replace
'open_mutex'.

Fixes: 1b0a2d95 ("md: use new apis to suspend array for ioctls involed array reconfiguration")
Reported-by: mgperkow@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218459Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240221090122.1281868-1-linan666@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

The block zone code does not use RB-tree. So remove the include of
linux/rbtree.h as it is not needed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240222131724.1803520-2-dlemoal@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Device mapper may create a non-zoned mapped device out of a zoned device
(e.g., the dm-zoned target). In such case, some queue limit such as the
max_zone_append_sectors and zone_write_granularity endup being non zero
values for a block device that is not zoned. Avoid this by clearing
these limits in blk_stack_limits() when the stacked zoned limit is
false.

Fixes: 3093a479 ("block: inherit the zoned characteristics in blk_stack_limits")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240222131724.1803520-1-dlemoal@kernel.orgSigned-off-by: Jens Axboe <axboe@kernel.dk>

Since commit 8b631f9c ("null_blk: remove the bio based I/O path"),
struct nullb members queue_depth and nr_queues are only ever written, so
delete them.

With that, null_exit_hctx() can also be deleted.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240222083420.6026-1-john.g.garry@oracle.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Remove pkt_init_queue and just pass the two parameters directly to
blk_alloc_disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240222073647.3776769-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The two users can get the private data from the gendisk with one less
pointer dereference, and we can drop the useless q parameter from
pkt_make_request_write.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240222073647.3776769-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Don't set the default max_segment_size value when a virt_boundary is
used.

Fixes: d690cb8a ("block: add an API to atomically update queue limits")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240221125010.3609444-1-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the queue limits directly to blk_mq_alloc_disk instead of
setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240220093248.3290292-6-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

null_gendisk_register isn't a very useful abstraction given that it
doesn't even allocate the gendisk.  Merge it into the only caller
instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240220093248.3290292-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Move the tagset initialization out of null_add_dev into a new
null_setup_tagset helper, and move the shared vs local differences
out of null_init_tag_set into the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240220093248.3290292-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Otherwise it will be reset to the always same value when initializing a
device using the shared tag_set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240220093248.3290292-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The bio based I/O path complicates null_blk and also make various
data structures, including the per-command one way bigger than
required for the main request based interface.   As the bio-based
path is mostly used by stacking drivers and simple memory based
drivers, and brd is a good example driver for the latter there is
no need to have a bio based path in null_blk.  Remove the path
to simplify the driver and make future block layer API changes
simpler by not having to deal with the complex two API setup in
null_blk.

Note that the queue_mode field in struct nullb_device is kept as
that is simpler than having two different places to check the
value and fully open coding the debugfs helpers as the existing
ones won't work without a named struct member.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240220093248.3290292-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the queue limit set at initialization time directly to
blk_mq_alloc_disk instead of updating it right after the allocation.

This requires refactoring the code a bit so that what was mmc_setup_queue
before also allocates the gendisk now and actually sets all limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240215070300.2200308-18-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the limits ublk imposes directly to blk_mq_alloc_disk instead of
setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-17-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits scm_block imposes directly to blk_mq_alloc_disk
instead of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-16-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits ubiblock imposes directly to blk_mq_alloc_disk
instead of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/r/20240215070300.2200308-15-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits mtd_blkdevs imposes directly to blk_mq_alloc_disk
instead of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-14-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits mspro_block imposes directly to blk_mq_alloc_disk
instead of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-13-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits ms_block imposes directly to blk_mq_alloc_disk
instead of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-12-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits gdrom imposes directly to blk_mq_alloc_disk instead
of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-11-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits sunvdc imposes directly to blk_mq_alloc_disk instead
of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-10-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the limits rnbd-clt imposes directly to blk_mq_alloc_disk instead
of setting them one at a time.

While at it don't set an explicit number of discard segments, as 1 is
the default (which most drivers rely on).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20240215070300.2200308-9-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the limits rbd imposes directly to blk_mq_alloc_disk instead
of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-8-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits ps3disk imposes directly to blk_mq_alloc_disk instead
of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-7-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits nbd imposes directly to blk_mq_alloc_disk instead
of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-6-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits mtip imposes directly to blk_mq_alloc_disk instead
of setting them one at a time and drop the pointless setting of a io_min
that is equal to the physical block size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-5-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits floppy imposes directly to blk_mq_alloc_disk instead
of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Denis Efremov <efremov@linux.com>
Link: https://lore.kernel.org/r/20240215070300.2200308-4-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits aoe imposes directly to blk_mq_alloc_disk instead
of setting them one at a time and improve the way the default
max_hw_sectors is initialized while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-3-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pass the few limits ubd imposes directly to blk_mq_alloc_disk instead
of setting them one at a time.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240215070300.2200308-2-hch@lst.deSigned-off-by: Jens Axboe <axboe@kernel.dk>