- 22 Aug, 2017 5 commits
-
-
Rob Clark authored
At least for debugging it is nice to have an easy way to force the driver not to load. Signed-off-by:Rob Clark <robdclark@gmail.com>
-
Rob Clark authored
Accessing registers for an unclocked block is an insta-reboot on snapdragon devices. So add a bit of logic to track the enable_count so we can WARN_ON() unclocked register writes. This makes it much easier to track down mistakes. Signed-off-by: -
Rob Clark authored
Signed-off-by: -
Jordan Crouse authored
Nearly all of the buffer allocations for kernel allocate an buffer object, virtual address and GPU iova at the same time. Make a helper function to handle the details. Signed-off-by:
Jordan Crouse <jcrouse@codeaurora.org> [dropped msm_fbdev conversion to new helper, since it interferes with display-handover work, where we want to separate allocation and mapping] Signed-off-by:
-
Jordan Crouse authored
Currently the GPU MMU is attached in the adreno_gpu code but as more and more of the GPU initialization moves to the generic GPU path we have a need to map and use GPU memory earlier and earlier. There isn't any reason to defer attaching the MMU until later so attach it right after the address space is created so it can be used immediately. Signed-off-by:
-
- 02 Aug, 2017 9 commits
-
-
Jordan Crouse authored
The A5XX GPU has really good hardware fault detection that can detect a abnormal hardware condition and fire an interrupt in a matter of milliseconds which is a lot better than waiting for the hangcheck timer. Enable the interrupt and log information before kicking off recovery. Signed-off-by:
-
Jordan Crouse authored
Commit eeb75474 ("drm/msm/gpu: use pm-runtime") adds a pointer for the GPU platform device to the msm_gpu struct so we can happily remove the same pointers from the individual GPU structs. Signed-off-by:
-
Archit Taneja authored
MDSS represents the top level wrapper that contains MDP5, DSI, HDMI and other sub-blocks. W.r.t device heirarchy, it's the parent of all these devices. The power domain of this device is actually tied to the GDSC hw. When any sub-device enables its PD, MDSS's PD is also enabled. The suspend/resume ops enable the top level clocks that end at the MDSS boundary. For now, we're letting them all be optional, since the child devices anyway hold a ref to these clocks. Until now, we'd called a runtime_get() during probe, which ensured that the GDSC was always on. Now that we've set up runtime PM for the children devices, we can get rid of this hack. Note: that the MDSS device is the platform_device in msm_drv.c. The msm_runtime_suspend/resume ops call the funcs that enable/disable the top level MDSS clocks. This is different from MDP4, where the platform device created in msm_drv.c represents MDP4 itself. It would have been nicer to hide these differences by adding new kms funcs, but runtime PM needs to be enabled before kms is set up (i.e, msm_kms_init is called). Signed-off-by:
Archit Taneja <architt@codeaurora.org> Signed-off-by:
-
Archit Taneja authored
Requests for assigning/freeing SMP blocks by planes are collected during the atomic check phase, and represented by mdp5_smp_state's 'assigned' and 'released' members. Once the atomic state is committed, these members are reset to 0, indicating that the existing configuration satisfies all the planes. Future atomic commits will copy the old mdp5_smp_state, and the 'assigned' and 'released' members would be updated only if there was a change in the plane configurations. When we disable and re-enable display, we lose the values we wrote to the SMP registers, but the code doesn't program the registers because there isn't any change in mdp5_smp_state. Fix this by writing to the registers irrespective of whether there was a change in SMP state or not. We do this by keeping a cache of the register values, and write them every time we commit a state. Signed-off-by:
-
Archit Taneja authored
We shouldn't use use mode_set/mode_set_nofb helpers when we use runtime PM. The registers configured in these funcs lose their state when we eventually enable the display pipeline. Do not implement these vfuncs in the helpers, and call them in the crtc_enable/encoder_enable paths instead. Signed-off-by:
-
Archit Taneja authored
The bus clocks are always enabled/disabled along with the power domain, so move it to the runtime suspend/resume ops. This cleans up the clock code a bit. Get rid of the clk_mutex mutex since it isn't needed. Signed-off-by:
-
Archit Taneja authored
Call the pm_runtime_get/put API where we need the clocks enabled. The main entry/exit points are 1) enabling/disabling the DSI bridge and 2) Sending commands from the DSI host to the device. Signed-off-by:
-
Archit Taneja authored
Enable rudimentary runtime PM in the HDMI driver. We can't really do agressive PM toggling at the moment because we need to leave the hpd clocks enabled all the time. There isn't much benefit of creating suspend/resume ops to toggle clocks either. We just make sure that we configure the power domain in the HDMI bridge's enable/disable paths, and the HDMI connector's detect() op. Signed-off-by:
-
Archit Taneja authored
mdp5_enable/disable calls are scattered all around in the MDP5 code. Use the pm_runtime_get/put calls here instead, and populate the runtime PM suspend/resume ops to manage the clocks. About the overall design: MDP5 is a child of the top level MDSS device. MDSS is also the parent to DSI, HDMI and other interfaces. When we enable MDP5's power domain, we end up enabling MDSS's PD too. It is only MDSS's PD that actually controlls the GDSC HW. Therefore, calling runtime_get/put on the MDP5 device is like just requesting a vote to enable/disable the GDSC. Functionally, replacing the clock enable/disable calls with the RPM API can result in the power domain (GDSC) state being toggled if no other child isn't powered on. This can result in the register context being lost. We make sure (in future commits) that code paths don't end up configuring registers and then later lose state, resulting in a bad HW state. For now, we've replaced each mdp5_enable/disable with runtime_get/put API. We could optimize things later by removing runtime_get/put calls which don't really need to be there. This could prevent unnecessary toggling of the power domain and clocks. Signed-off-by:
-
- 01 Aug, 2017 17 commits
-
-
Arnd Bergmann authored
In zap_shader_load_mdt(), we pass a pointer to a phys_addr_t into dmam_alloc_coherent, which the compiler warns about: drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'zap_shader_load_mdt': drivers/gpu/drm/msm/adreno/a5xx_gpu.c:54:50: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The returned DMA address is later passed on to a function that takes a phys_addr_t, so it's clearly wrong to use the DMA mapping interface here: the memory may be uncached, or the address may be completely wrong if there is an IOMMU connected to the device. What the code actually wants to do is to get the physical address from the reserved-mem node. It goes through the dma-mapping interfaces for obscure reasons, and this apparently only works by chance, relying on specific bugs in the error handling of the arm64 dma-mapping implementation. The same problem existed in the "venus" media driver, which was now fixed by Stanimir Varbanov after long discussions. In order to make some progress here, I have now ported his approach over to the adreno driver. The patch is currently untested, and should get a good review, but it is now much simpler than the original, and it should be obvious what goes wrong if I made a mistake in the port. See also: a6e2d36b ("media: venus: don't abuse dma_alloc for non-DMA allocations") Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org> Fixes: 7c65817e ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Acked-and-Tested-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
When compile-testing for something other than ARCH_QCOM, we run into a link error: drivers/gpu/drm/msm/adreno/a5xx_gpu.o: In function `a5xx_hw_init': a5xx_gpu.c:(.text.a5xx_hw_init+0x600): undefined reference to `qcom_mdt_get_size' a5xx_gpu.c:(.text.a5xx_hw_init+0x93c): undefined reference to `qcom_mdt_load' There is already an #ifdef that tries to check for CONFIG_QCOM_MDT_LOADER, but that symbol is only meaningful when building for ARCH_QCOM. This adds a compile-time check for ARCH_QCOM, and clarifies the Kconfig select statement so we don't even try it for other targets. The check for CONFIG_QCOM_MDT_LOADER can then go away, which also improves compile-time coverage and makes the code a little nicer to read. Fixes: 7c65817e ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by:
-
Archit Taneja authored
msm_gpu's get_timestamp() op (called by the MSM_GET_PARAM ioctl) can result in register accesses. We need our power domain and clocks to be active for that. Make sure they are enabled here. Signed-off-by:
-
Jordan Crouse authored
__user should be used to identify user pointers and not __u64 variables containing pointers. Signed-off-by:
-
Jordan Crouse authored
Fix a typo in msm_ioctl_gem_submit - check args->flags for the MSM_SUBMIT_NO_IMPLICIT flag instead of args->fence. Signed-off-by:
-
Jordan Crouse authored
On A5XX GPU hardware clock gating needs to be turned off before reading certain GPU registers via AHB. Turn off HWCG before calling adreno_show() to safely dump all the registers without a system hang. Signed-off-by:
-
Jordan Crouse authored
There are some use cases wherein we need to turn off hardware clock gating before reading certain registers. Modify the A5XX HWCG function to allow user to enable or disable clock gating at will. Signed-off-by:
-
Jordan Crouse authored
The 0xf400 and 0xf800 ranges are in the RBBM_SECVID block which may be protected from CPU access. Skip dumping them since they are minimally useful for debugging and they aren't worth a system hang. Signed-off-by:
-
Archit Taneja authored
We have upstream bindings (msm8916) that have the "_clk" suffix in the clock names. The downstream bindings also require it. We want to drop the "_clk" suffix and at the same time support existing bindings. Update the MDP5 code with the the msm_clk_get() helper to support both old and new clock names. Signed-off-by:
-
Archit Taneja authored
The mdp5_cmd_encoder_disable is accidentally called in the encoder enable path. We've not seen any problems since we haven't tested with command mode panels in a while. Fix the copy-paste error. Signed-off-by:
-
Hans Verkuil authored
While I was testing the upcoming adv7533 CEC support with my Dragonboard c410 I encountered this NULL pointer dereference: [ 17.912822] Unable to handle kernel NULL pointer dereference at virtual address 000000e8 [ 17.917191] user pgtable: 4k pages, 48-bit VAs, pgd = ffff800030e9f000 [ 17.925249] [00000000000000e8] *pgd=00000000b0daf003, *pud=0000000000000000 [ 17.931650] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 17.938395] Modules linked in: btqcomsmd btqca arc4 wcn36xx mac80211 bluetooth cfg80211 ecdh_generic r8152 snd_soc_hdmi_codec adv7511 cec qcom_wcnss_pil msm mdt_loader drm_kms_helper msm_rng rng_core drm [ 17.943967] CPU: 0 PID: 1684 Comm: Xorg Tainted: G W 4.13.0-rc1-dragonboard #111 [ 17.962005] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 17.970685] task: ffff800031236c00 task.stack: ffff800033fbc000 [ 17.977582] PC is at msm_gem_unmap_vma+0x20/0x80 [msm] [ 17.983213] LR is at put_iova+0x60/0xb8 [msm] [ 17.988303] pc : [<ffff000000ac2d58>] lr : [<ffff000000ac07c8>] pstate: 20000145 [ 17.992733] sp : ffff800033fbfb30 [ 18.000193] x29: ffff800033fbfb30 x28: ffff800030b5f000 [ 18.003407] x27: 00000000000000b4 x26: ffff0000009f8cd8 [ 18.008789] x25: 0000000000000004 x24: dead000000000100 [ 18.014085] x23: dead000000000200 x22: ffff800030b5fd40 [ 18.019379] x21: ffff800030b5fc00 x20: 0000000000000000 [ 18.024675] x19: ffff80003082bf00 x18: 0000000000000000 [ 18.029970] x17: 0000ffffb3347e70 x16: ffff000008207638 [ 18.035265] x15: 0000000000000053 x14: 0000000000000000 [ 18.040560] x13: 0000000000000038 x12: 0101010101010101 [ 18.045855] x11: 7f7f7f7f7f7f7f7f x10: 0000000000000040 [ 18.051150] x9 : ffff800030b5f038 x8 : ffff800031657b50 [ 18.056446] x7 : ffff800031657b78 x6 : 0000000000000000 [ 18.061740] x5 : 0000000000000000 x4 : 00000000b5c01000 [ 18.067036] x3 : 0000000000000000 x2 : ffff8000337bf300 [ 18.072330] x1 : ffff80003082bf00 x0 : 0000000000000000 [ 18.077629] Process Xorg (pid: 1684, stack limit = 0xffff800033fbc000) [ 18.082925] Stack: (0xffff800033fbfb30 to 0xffff800033fc0000) [ 18.089262] fb20: ffff800033fbfb60 ffff000000ac07c8 [ 18.095081] fb40: ffff80003082bf00 ffff800030b5fc90 ffff800030b5fc00 ffff000000abf4a0 [ 18.102893] fb60: ffff800033fbfba0 ffff000000ac16b0 ffff800030b5fc00 ffff8000338ff870 [ 18.110706] fb80: ffff8000338ff800 ffff800030b5fc00 ffff800030b5fda8 ffff800033fbfd80 [ 18.118518] fba0: ffff800033fbfbe0 ffff0000009d4244 ffff800030b5fc00 ffff800030b5f038 [ 18.126332] fbc0: ffff800033fbfbd0 ffff800030b5fc00 ffff800030b5f038 ffff0000009d4840 [ 18.134144] fbe0: ffff800033fbfbf0 ffff0000009d4858 ffff800033fbfc10 ffff0000009d48e4 [ 18.141955] fc00: ffff800030b5fc00 ffff8000338ffd98 ffff800033fbfc30 ffff0000009d49a4 [ 18.149768] fc20: ffff800030b5fc00 ffff800030b5f000 ffff800033fbfc60 ffff0000009d4a4c [ 18.157581] fc40: ffff800030b5f050 ffff800030b5f000 0000000000000001 ffff800030b5fc00 [ 18.165394] fc60: ffff800033fbfca0 ffff0000009d4ab0 0000000000000018 ffff800030b5f000 [ 18.173206] fc80: ffff0000009efd28 ffff800033fbfd80 ffff8000338ff800 ffff0000009d56a8 [ 18.181019] fca0: ffff800033fbfcb0 ffff0000009efd54 ffff800033fbfcc0 ffff0000009d56c8 [ 18.188831] fcc0: ffff800033fbfd00 ffff0000009d58e0 ffff0000009fa6e0 00000000c00464b4 [ 18.196643] fce0: 0000000000000004 ffff80003082b400 0000ffffea1f0e00 0000000000000000 [ 18.204456] fd00: ffff800033fbfe00 ffff000008206f0c ffff80000335caf8 ffff80003082b400 [ 18.212269] fd20: 0000ffffea1f0e00 ffff80003082b400 00000000c00464b4 0000ffffea1f0e00 [ 18.220081] fd40: 0000000000000124 000000000000001d ffff0000089d2000 ffff800031236c00 [ 18.227894] fd60: ffff800033fbfd80 0000000000000004 ffff0000009efd28 ffff800033fbfd80 [ 18.235706] fd80: 0000000100000001 0000008000000001 0000001800000020 0000000000000001 [ 18.243518] fda0: 0000000100000000 0000000100000001 0000ffff00000000 0000ffff00000000 [ 18.251331] fdc0: 0000000000000124 0000000000000038 ffff0000089d2000 ffff800031236c00 [ 18.259144] fde0: ffff800033fbfe40 ffff000008214124 ffff800033fbfe30 ffff000008203290 [ 18.266956] fe00: ffff800033fbfe80 ffff0000082076b4 0000000000000000 ffff800030d8a000 [ 18.274768] fe20: ffff80003082b400 0000000000000016 ffff800033fbfe50 ffff0000081f0488 [ 18.282581] fe40: ffff800033fbfe80 ffff000008207678 0000000000000000 ffff80003082b400 [ 18.290393] fe60: ffff800033fbfe70 ffff0000082138b0 ffff800033fbfe80 ffff000008207658 [ 18.298207] fe80: 0000000000000000 ffff000008082f84 0000000000000000 0000800034a16000 [ 18.306017] fea0: ffffffffffffffff 0000ffffb3347e7c 0000000000000000 0000000000000015 [ 18.313832] fec0: 0000000000000016 00000000c00464b4 0000ffffea1f0e00 0000000000000001 [ 18.321643] fee0: 0000000000000020 0000000000000080 0000000000000001 0000000000000000 [ 18.329456] ff00: 000000000000001d 000000012692c5b0 0101010101010101 7f7f7f7f7f7f7f7f [ 18.337269] ff20: 0101010101010101 0000000000000038 0000000000000000 0000000000000053 [ 18.345082] ff40: 0000ffffb368b2b8 0000ffffb3347e70 0000000000000000 0000ffffb3847000 [ 18.352894] ff60: 0000ffffea1f0e00 00000000c00464b4 0000000000000016 0000ffffea1f0edc [ 18.360705] ff80: 000000012692ad20 0000000000000003 00000001214282e4 0000000121428388 [ 18.368518] ffa0: 0000000000000000 0000ffffea1f0da0 0000ffffb367185c 0000ffffea1f0da0 [ 18.376332] ffc0: 0000ffffb3347e7c 0000000000000000 0000000000000016 000000000000001d [ 18.384142] ffe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 18.391953] Call trace: [ 18.399760] Exception stack(0xffff800033fbf950 to 0xffff800033fbfa80) [ 18.402023] f940: ffff80003082bf00 0001000000000000 [ 18.408622] f960: ffff800033fbfb30 ffff000000ac2d58 0000000020000145 ffff8000338ffa78 [ 18.416435] f980: 0000000000000000 0000000000000000 ffff800033fbf9e0 ffff0000089afcf0 [ 18.424248] f9a0: ffff80000348f230 ffff8000338ffa78 0000000000000000 0000000000000000 [ 18.432060] f9c0: ffff8000338ffaa8 0000000000000001 ffff800033fbfb80 ffff0000009e8f38 [ 18.439872] f9e0: ffff800033fbfa10 ffff0000089a9ff8 0000000000000027 ffff80003082b918 [ 18.447684] fa00: 0000000000000000 ffff80003082bf00 ffff8000337bf300 0000000000000000 [ 18.455497] fa20: 00000000b5c01000 0000000000000000 0000000000000000 ffff800031657b78 [ 18.463310] fa40: ffff800031657b50 ffff800030b5f038 0000000000000040 7f7f7f7f7f7f7f7f [ 18.471122] fa60: 0101010101010101 0000000000000038 0000000000000000 0000000000000053 [ 18.479062] [<ffff000000ac2d58>] msm_gem_unmap_vma+0x20/0x80 [msm] [ 18.486862] [<ffff000000ac07c8>] put_iova+0x60/0xb8 [msm] [ 18.492938] [<ffff000000ac16b0>] msm_gem_free_object+0x60/0x198 [msm] [ 18.498432] [<ffff0000009d4244>] drm_gem_object_free+0x1c/0x58 [drm] [ 18.504854] [<ffff0000009d4858>] drm_gem_object_put_unlocked+0x90/0xa0 [drm] [ 18.511273] [<ffff0000009d48e4>] drm_gem_object_handle_put_unlocked+0x64/0xd0 [drm] [ 18.518300] [<ffff0000009d49a4>] drm_gem_object_release_handle+0x54/0x98 [drm] [ 18.525679] [<ffff0000009d4a4c>] drm_gem_handle_delete+0x64/0xb8 [drm] [ 18.532968] [<ffff0000009d4ab0>] drm_gem_dumb_destroy+0x10/0x18 [drm] [ 18.539479] [<ffff0000009efd54>] drm_mode_destroy_dumb_ioctl+0x2c/0x40 [drm] [ 18.545992] [<ffff0000009d56c8>] drm_ioctl_kernel+0x68/0xe0 [drm] [ 18.553105] [<ffff0000009d58e0>] drm_ioctl+0x178/0x3b0 [drm] [ 18.558970] [<ffff000008206f0c>] do_vfs_ioctl+0xa4/0x7d0 [ 18.564694] [<ffff0000082076b4>] SyS_ioctl+0x7c/0x98 [ 18.569992] [<ffff000008082f84>] el0_svc_naked+0x38/0x3c [ 18.574941] Code: a90153f3 aa0003f4 f90013f5 aa0103f3 (f9407400) [ 18.580502] ---[ end trace b1ac6888ec40b0be ]--- It turns out that the aspace argument in msm_gem_unmap_vma() is NULL. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> [Note: this case gets hit with !IOMMU config] Signed-off-by:
-
Hans Verkuil authored
While I was testing the upcoming adv7533 CEC support with my Dragonboard c410 I encountered this warning several times during boot: [ 4.408309] WARNING: CPU: 3 PID: 1347 at drivers/gpu/drm/msm/msm_gem.c:312 add_vma+0x78/0x88 [msm] [ 4.412951] Modules linked in: snd_soc_hdmi_codec adv7511 cec qcom_wcnss_pil msm mdt_loader drm_kms_helper msm_rng rng_core drm [ 4.421728] CPU: 3 PID: 1347 Comm: kworker/3:3 Not tainted 4.13.0-rc1-dragonboard #111 [ 4.433090] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [ 4.441081] Workqueue: events deferred_probe_work_func [ 4.447929] task: ffff800031243600 task.stack: ffff800003394000 [ 4.453023] PC is at add_vma+0x78/0x88 [msm] [ 4.458823] LR is at _msm_gem_new+0xd4/0x188 [msm] [ 4.463207] pc : [<ffff000000ac01f8>] lr : [<ffff000000ac06b4>] pstate: 40000145 [ 4.467811] sp : ffff8000033978a0 [ 4.475357] x29: ffff8000033978a0 x28: ffff8000031dea18 [ 4.478572] x27: ffff800003933a00 x26: ffff800003b39800 [ 4.483953] x25: ffff8000338ff800 x24: 0000000000000001 [ 4.489249] x23: 0000000000000000 x22: ffff800003b39800 [ 4.494544] x21: ffff8000338ff800 x20: 0000000000000000 [ 4.499839] x19: ffff800003932600 x18: 0000000000000001 [ 4.505135] x17: 0000ffff8969e9e0 x16: ffff7e00000ce7a0 [ 4.510429] x15: ffffffffffffffff x14: ffff8000833977ef [ 4.515724] x13: ffff8000033977f3 x12: 0000000000000038 [ 4.521020] x11: 0101010101010101 x10: ffffff7f7fff7f7f [ 4.526315] x9 : 0000000000000000 x8 : ffff800003932800 [ 4.531633] x7 : 0000000000000000 x6 : 000000000000003f [ 4.531644] x5 : 0000000000000040 x4 : 0000000000000000 [ 4.531650] x3 : ffff800031243600 x2 : 0000000000000000 [ 4.531655] x1 : 0000000000000000 x0 : 0000000000000000 [ 4.531670] Call trace: [ 4.531676] Exception stack(0xffff8000033976c0 to 0xffff8000033977f0) [ 4.531683] 76c0: ffff800003932600 0001000000000000 ffff8000033978a0 ffff000000ac01f8 [ 4.531688] 76e0: 0000000000000140 0000000000000000 ffff800003932550 ffff800003397780 [ 4.531694] 7700: ffff800003397730 ffff000008261ce8 0000000000000000 ffff8000031d2f80 [ 4.531699] 7720: ffff800003397800 ffff0000081d671c 0000000000000140 0000000000000000 [ 4.531705] 7740: ffff000000ac04c0 0000000000004003 ffff800003397908 00000000014080c0 [ 4.531710] 7760: 0000000000000000 ffff800003b39800 0000000000000000 0000000000000000 [ 4.531716] 7780: 0000000000000000 ffff800031243600 0000000000000000 0000000000000040 [ 4.531721] 77a0: 000000000000003f 0000000000000000 ffff800003932800 0000000000000000 [ 4.531726] 77c0: ffffff7f7fff7f7f 0101010101010101 0000000000000038 ffff8000033977f3 [ 4.531730] 77e0: ffff8000833977ef ffffffffffffffff [ 4.531881] [<ffff000000ac01f8>] add_vma+0x78/0x88 [msm] [ 4.532011] [<ffff000000ac06b4>] _msm_gem_new+0xd4/0x188 [msm] [ 4.532134] [<ffff000000ac1900>] msm_gem_new+0x10/0x18 [msm] [ 4.532260] [<ffff000000acb274>] msm_dsi_host_modeset_init+0x17c/0x268 [msm] [ 4.532384] [<ffff000000ac9024>] msm_dsi_modeset_init+0x34/0x1b8 [msm] [ 4.532504] [<ffff000000ab6168>] modeset_init+0x408/0x488 [msm] [ 4.532623] [<ffff000000ab6c4c>] mdp5_kms_init+0x2b4/0x338 [msm] [ 4.532745] [<ffff000000abeff8>] msm_drm_bind+0x218/0x4e8 [msm] [ 4.532755] [<ffff00000855d744>] try_to_bring_up_master+0x1f4/0x318 [ 4.532762] [<ffff00000855d900>] component_add+0x98/0x180 [ 4.532887] [<ffff000000ac8da0>] dsi_dev_probe+0x18/0x28 [msm] [ 4.532895] [<ffff000008565fe8>] platform_drv_probe+0x58/0xc0 [ 4.532901] [<ffff00000856410c>] driver_probe_device+0x324/0x458 [ 4.532907] [<ffff00000856440c>] __device_attach_driver+0xac/0x170 [ 4.532913] [<ffff000008561ef4>] bus_for_each_drv+0x4c/0x98 [ 4.532918] [<ffff000008563c38>] __device_attach+0xc0/0x160 [ 4.532924] [<ffff000008564530>] device_initial_probe+0x10/0x18 [ 4.532929] [<ffff000008562f84>] bus_probe_device+0x94/0xa0 [ 4.532934] [<ffff0000085635d4>] deferred_probe_work_func+0x8c/0xe8 [ 4.532941] [<ffff0000080d79bc>] process_one_work+0x1d4/0x330 [ 4.532946] [<ffff0000080d7b60>] worker_thread+0x48/0x468 [ 4.532952] [<ffff0000080ddae4>] kthread+0x12c/0x130 [ 4.532958] [<ffff000008082f10>] ret_from_fork+0x10/0x40 [ 4.532962] ---[ end trace b1ac6888ec40b0bb ]--- Signed-off-by:
-
Archit Taneja authored
After the commit mentioned below, we start computing the byte and pixel clocks (dsi_calc_clk_rate) in the DSI bridge's mode_set() op. The calculation involves the number of DSI lanes being used by the downstream bridge/panel. If the downstream bridge/panel tries to change the number of DSI lanes (as done in the ADV7533 driver) in its mode_set() op, then our DSI host driver will not have the correct number of lanes when computing byte/pixel clocks. Fix this by delaying the clock rate calculation in the DSI bridge enable path. In particular, compute the clock rates in msm_dsi_host_get_phy_clk_req(). This fixes the DSI host error interrupts seen when we try to switch between modes that require different number of lanes (4 to 3 lanes, or vice versa) on db410c. The error interrupts occur since the byte/pixel clock rates aren't according to what the DSI video mode timing engine expects. Fixes: b62aa70a ("drm/msm/dsi: Move PHY operations out of host") Signed-off-by:
-
Rob Clark authored
Fixes an insta-reboot when screen-blanking kicks in, due to cursor updates without clocks enabled. Signed-off-by: -
Dan Carpenter authored
We recently added locking to this function but there was a direct return that was overlooked where we need to unlock. Fixes: 0e08270a ("drm/msm: Separate locking of buffer resources from struct_mutex") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
We recently added an integer overflow check but it needs an additional tweak to work properly on 32 bit systems. The problem is that we're doing the right hand side of the assignment as type unsigned long so the max it will have an integer overflow instead of being larger than SIZE_MAX. That means the "sz > SIZE_MAX" condition is never true even on 32 bit systems. We need to first cast it to u64 and then do the math. Fixes: 4a630fad ("drm/msm: Fix potential buffer overflow issue") Signed-off-by:
-
Viresh Kumar authored
Following compilation warnings were observed for these files: CC [M] drivers/gpu/drm/msm/mdp/mdp5/mdp5_mdss.o drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c: In function 'blend_setup': drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:223:7: warning: missing braces around initializer [-Wmissing-braces] enum mdp5_pipe stage[STAGE_MAX + 1][MAX_PIPE_STAGE] = { SSPP_NONE }; ^ drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:223:7: warning: (near initialization for 'stage[0]') [-Wmissing-braces] drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:224:7: warning: missing braces around initializer [-Wmissing-braces] enum mdp5_pipe r_stage[STAGE_MAX + 1][MAX_PIPE_STAGE] = { SSPP_NONE }; ^ drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c:224:7: warning: (near initialization for 'r_stage[0]') [-Wmissing-braces] drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c: In function 'mdp5_plane_mode_set': drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:892:9: warning: missing braces around initializer [-Wmissing-braces] struct phase_step step = { 0 }; ^ drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:892:9: warning: (near initialization for 'step.x') [-Wmissing-braces] drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:893:9: warning: missing braces around initializer [-Wmissing-braces] struct pixel_ext pe = { 0 }; ^ drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c:893:9: warning: (near initialization for 'pe.left') [-Wmissing-braces] This happens because in the first case we were initializing a two dimensional array with {0} and in the second case we were initializing a struct containing two arrays with {0}. Fix them by adding another pair of {}. Signed-off-by:Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
- 30 Jul, 2017 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A small set of x86 fixes: - prevent the kernel from using the EFI reboot method when EFI is disabled. - two patches addressing clang issues" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Disable the address-of-packed-member compiler warning x86/efi: Fix reboot_mode when EFI runtime services are disabled x86/boot: #undef memcpy() et al in string.c -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two patches addressing build warnings caused by inconsistent kernel doc comments" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/wait: Clean up some documentation warnings sched/core: Fix some documentation build warnings
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A couple of fixes for performance counters and kprobes: - a series of small patches which make the uncore performance counters on Skylake server systems work correctly - add a missing instruction slot release to the failure path of kprobes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes/x86: Release insn_slot in failure path perf/x86/intel/uncore: Fix missing marker for skx_uncore_cha_extra_regs perf/x86/intel/uncore: Fix SKX CHA event extra regs perf/x86/intel/uncore: Remove invalid Skylake server CHA filter field perf/x86/intel/uncore: Fix Skylake server CHA LLC_LOOKUP event umask perf/x86/intel/uncore: Fix Skylake server PCU PMU event format perf/x86/intel/uncore: Fix Skylake UPI PMU event masks -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fix from Thomas Gleixner: "Fix for a regression caused by the conversion of x86 to the generic hotplug code. Instead of doing a plain single line revert, this adds a pile of comments so the semantics of the force argument are clear" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/cpuhotplug: Revert "Set force affinity flag on hotplug migration"
-
- 29 Jul, 2017 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds authored
Pull DeviceTree fixes from Rob Herring: "Two small DT fixes: - Fix error handling in of_irq_to_resource_table() due to of_irq_to_resource() error return changes. - Fix dtx_diff script due to dts include path changes" * tag 'devicetree-fixes-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: irq: fix of_irq_to_resource() error check scripts/dtc: dtx_diff - update include dts paths to match build
-
- 28 Jul, 2017 3 commits
-
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client fixes from Anna Schumaker: "More NFS client bugfixes for 4.13. Most of these fix locking bugs that Ben and Neil noticed, but I also have a patch to fix one more access bug that was reported after last week. Stable fixes: - Fix a race where CB_NOTIFY_LOCK fails to wake a waiter - Invalidate file size when taking a lock to prevent corruption Other fixes: - Don't excessively generate tiny writes with fallocate - Use the raw NFS access mask in nfs4_opendata_access()" * tag 'nfs-for-4.13-3' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiter NFS: Optimize fallocate by refreshing mapping when needed. NFS: invalidate file size when taking a lock. NFS: Use raw NFS access mask in nfs4_opendata_access()
-
git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds authored
Pull xfs fixes from Darrick Wong: - fix firstfsb variables that we left uninitialized, which could lead to locking problems. - check for NULL metadata buffer pointers before using them. - don't allow btree cursor manipulation if the btree block is corrupt. Better to just shut down. - fix infinite loop problems in quotacheck. - fix buffer overrun when validating directory blocks. - fix deadlock problem in bunmapi. * tag 'xfs-4.13-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix multi-AG deadlock in xfs_bunmapi xfs: check that dir block entries don't off the end of the buffer xfs: fix quotacheck dquot id overflow infinite loop xfs: check _alloc_read_agf buffer pointer before using xfs: set firstfsb to NULLFSBLOCK before feeding it to _bmapi_write xfs: check _btree_check_block value
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Paolo Bonzini: "s390: - SRCU fix PPC: - host crash fixes x86: - bugfixes, including making nested posted interrupts really work Generic: - tweaks to kvm_stat and to uevents" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: LAPIC: Fix reentrancy issues with preempt notifiers tools/kvm_stat: add '-f help' to get the available event list tools/kvm_stat: use variables instead of hard paths in help output KVM: nVMX: Fix loss of L2's NMI blocking state KVM: nVMX: Fix posted intr delivery when vcpu is in guest mode x86: irq: Define a global vector for nested posted interrupts KVM: x86: do mask out upper bits of PAE CR3 KVM: make pid available for uevents without debugfs KVM: s390: take srcu lock when getting/setting storage keys KVM: VMX: remove unused field KVM: PPC: Book3S HV: Fix host crash on changing HPT size KVM: PPC: Book3S HV: Enable TM before accessing TM registers
-
