- 26 Jun, 2013 2 commits
-
-
Stephen Hemminger authored
Signed-off-by:Stephen Hemminger <stephen@networkplumber.org>
-
Stephen Hemminger authored
-
- 25 Jun, 2013 38 commits
-
-
Stephen Hemminger authored
The check for all-zero ether address was removed from rtnetlink core, since Vxlan uses all-zero ether address to signify default address. Need to add check back in for bridge. Signed-off-by: -
Veaceslav Falico authored
Currently, we fail only when all of the ips in arp_ip_target are gone. However, in some situations we might need to fail if even one host from arp_ip_target becomes unavailable. All situations, obviously, rely on the idea that we need *completely* functional network, with all interfaces/addresses working correctly. One real world example might be: vlans on top on bond (hybrid port). If bond and vlans have ips assigned and we have their peers monitored via arp_ip_target - in case of switch misconfiguration (trunk/access port), slave driver malfunction or tagged/untagged traffic dropped on the way - we will be able to switch to another slave. Though any other configuration needs that if we need to have access to all arp_ip_targets. This patch adds this possibility by adding a new parameter - arp_all_targets (both as a module parameter and as a sysfs knob). It can be set to: 0 or any (the default) - which works exactly as it's working now - the slave is up if any of the arp_ip_targets are up. 1 or all - the slave is up if all of the arp_ip_targets are up. This parameter can be changed on the fly (via sysfs), and requires the mode to be active-backup and arp_validate to be enabled (it obeys the arp_validate config on which slaves to validate). Internally it's done through: 1) Add target_last_arp_rx[BOND_MAX_ARP_TARGETS] array to slave struct. It's an array of jiffies, meaning that slave->target_last_arp_rx[i] is the last time we've received arp from bond->params.arp_targets[i] on this slave. 2) If we successfully validate an arp from bond->params.arp_targets[i] in bond_validate_arp() - update the slave->target_last_arp_rx[i] with the current jiffies value. 3) When getting slave's last_rx via slave_last_rx(), we return the oldest time when we've received an arp from any address in bond->params.arp_targets[]. If the value of arp_all_targets == 0 - we still work the same way as before. Also, update the documentation to reflect the new parameter. v3->v4: Kill the forgotten rtnl_unlock(), rephrase the documentation part to be more clear, don't fail setting arp_all_targets if arp_validate is not set - it has no effect anyway but can be easier to set up. Also, print a warning if the last arp_ip_target is removed while the arp_interval is on, but not the arp_validate. v2->v3: Use _bh spinlock, remove useless rtnl_lock() and use jiffies for new arp_ip_target last arp, instead of slave_last_rx(). On bond_enslave(), use the same initialization value for target_last_arp_rx[] as is used for the default last_arp_rx, to avoid useless interface flaps. Also, instead of failing to remove the last arp_ip_target just print a warning - otherwise it might break existing scripts. v1->v2: Correctly handle adding/removing hosts in arp_ip_target - we need to shift/initialize all slave's target_last_arp_rx. Also, don't fail module loading on arp_all_targets misconfiguration, just disable it, and some minor style fixes. Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Veaceslav Falico authored
Add some details to bonding documentation on how backup slave arp validation works. Signed-off-by:
-
Veaceslav Falico authored
Currently, if we receive any arp packet on a backup slave in active-backup mode and arp_validate enabled, we suppose that it's an arp request, swap source/target ip and try to validate it. This optimization gives us virtually no downtime in the most common situation (active and backup slaves are in the same broadcast domain and the active slave failed). However, if we can't reach the arp_ip_target(s), we end up in an endless loop of reselecting slaves, because we receive our arp requests, sent by the active slave, and think that backup slaves are up, thus selecting them as active and, again, sending arp requests, which fool our backup slaves. Fix this by not validating the swapped arp packets if the current active slave didn't receive any arp reply after it was selected as active. This way we will only accept arp requests if we know that the current active slave can actually reach arp_ip_target. v3->v4: Obey 80 lines and make checkpatch.pl happy, per Sergei's suggestion. v1->v3: No change. Signed-off-by:
-
Veaceslav Falico authored
Currently, we validate all the incoming arps if arp_validate not 0. However, we don't have to validate backup slaves if arp_validate == active and vice versa, so return early in bond_arp_rcv() in these cases. It works correctly now because we verify arp_validate in slave_last_rx(), however we're just doing useless work in bond_arp_rcv(). Signed-off-by:
-
Veaceslav Falico authored
Print a warning and skip them. Signed-off-by:
-
Veaceslav Falico authored
Add function bond_get_targets_ip(targets, ip) which searches through targets array of ips (arp_targets) and returns the position of first match. If ip == 0, returns the first free slot. On failure to find the ip or free slot, return -1. Use it to verify if the arp we've received is valid and in sysfs. v1->v2: Fix "[2/6] bonding: add helper function bond_get_targets_ip(targets, ip)", per Nikolay's advice, to verify if source ip != 0.0.0.0, otherwise we might update 'null' arp_ip_targets' last_rx. Also, address style. Signed-off-by:
-
Lad, Prabhakar authored
guard the davinci_mdio_of_mtable table and davinci_mdio_probe_dt() with CONFIG_OF. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Lad, Prabhakar authored
This patch cleans up the OF parser code, removes unnecessary checks on of_property_read_*() and guards davinci_emac_of_match table with CONFIG_OF. Signed-off-by:
-
Lad, Prabhakar authored
Use devm_ioremap_resource instead of devm_request_mem_region()/devm_ioremap() and devm_request_irq() instead of request_irq(). This ensures more consistent error values and simplifies error paths. Signed-off-by:
-
Cong Wang authored
Cc: Patrick McHardy <kaber@trash.net> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
When macvtap forwards skb to its tap, it needs to check if GSO needs to be performed. This is sometimes necessary when the HW device performed GRO, but the guest reading from the tap does not support it (ex: Windows 7). Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
When the user issues TUNSETOFFLOAD ioctl, macvtap does not do anything other then to verify arguments. This patch adds functionality to allow users to actually control offload features. NETIF_F_GSO and NETIF_F_GRO are always on, but the rest of the features can be controlled. Signed-off-by:
-
Vlad Yasevich authored
Currently macvtap uses rcu_bh functions in its user facing fuction macvtap_get_user() and macvtap_put_user(). However, its packet handlers use normal rcu as the rcu_read_lock() is taken in netif_receive_skb(). We can safely discontinue the usage or rcu with bh disabled. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Vlad Yasevich authored
Macvtap uses a private lock to protect the relationship between macvtap_queue and macvlan_dev. The private lock is not needed since the relationship is managed by user via open(), release(), and dellink() calls. dellink() already happens under rtnl, so we can safely convert open() and release(), and use it in ioctl() as well. Suggested by Eric Dumazet. Signed-off-by:
-
Eliezer Tamir authored
select/poll busy-poll support. Split sysctl value into two separate ones, one for read and one for poll. updated Documentation/sysctl/net.txt Add a new poll flag POLL_LL. When this flag is set, sock_poll will call sk_poll_ll if possible. sock_poll sets this flag in its return value to indicate to select/poll when a socket that can busy poll is found. When poll/select have nothing to report, call the low-level sock_poll again until we are out of time or we find something. Once the system call finds something, it stops setting POLL_LL, so it can return the result to the user ASAP. Signed-off-by:
Eliezer Tamir <eliezer.tamir@linux.intel.com> Signed-off-by:
-
Alexey Brodkin authored
Driver for non-standard on-chip ethernet device ARC EMAC 10/100, instantiated in some legacy ARC (Synopsys) FPGA Boards such as ARCAngel4/ML50x. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Joe Perches <joe@perches.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Cc: Florian Fainelli <florian@openwrt.org> Cc: David Laight <david.laight@aculab.com> Signed-off-by:
-
Daniel Borkmann authored
No need to have an extra ret variable when we directly can return the value of sctp_get_port_local(). Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Rather instead of having the endpoint clean the garbage from the socket, use a sk_destruct handler sctp_destruct_sock(), that does the job for that when there are no more references on the socket. At least do this for our crypto transform through crypto_free_hash() that is allocated when in listening state. Also, perform sctp_put_port() only when sk is valid. At a later point in time we can still determine if there's an option of placing this into sk_prot->unhash() or sctp_endpoint_free() without any races. For now, leave it in sctp_endpoint_destroy() though. Signed-off-by:
-
Daniel Borkmann authored
A trailing newline has been forgotten to add into the WARN(). Signed-off-by:
-
Daniel Borkmann authored
Currently, SCTP code defines its own timeval functions (since timeval is rarely used inside the kernel by others), namely tv_lt() and TIMEVAL_ADD() macros, that operate on SCTP cookie expiration. We might as well remove all those, and operate directly on ktime structures for a couple of reasons: ktime is available on all archs; complexity of ktime calculations depending on the arch is less than (reduces to a simple arithmetic operations on archs with BITS_PER_LONG == 64 or CONFIG_KTIME_SCALAR) or equal to timeval functions (other archs); code becomes more readable; macros can be thrown out. Signed-off-by:
-
Daniel Borkmann authored
Add two ktime helper functions that i) convert a given msec value to a ktime structure and ii) that adds a msec value to a ktime structure. Signed-off-by:
-
Daniel Borkmann authored
We do neither ship a test_frame.h, nor will this be compatible with the 2.5 out-of-tree lksctp kernel test suite anyway. So remove this artefact. Signed-off-by:
-
Jack Morgenstein authored
Should not allow negative num_vfs Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.com> Signed-off-by:
Vladimir Sokolovsky <vlad@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Dotan Barak authored
Warning prints when there are command timeout to help debugging future failures. Signed-off-by:
Dotan Barak <dotanb@dev.mellanox.com> Signed-off-by:
-
Dotan Barak authored
It is not safe to use sscanf. Signed-off-by:
-
Dotan Barak authored
Since this variable is now part of a structure and not allocated dynamically, this test is irrelevant now. Signed-off-by:
-
Yevgeny Petrilin authored
Print a warning when a TX timeout is detected Signed-off-by:
Yevgeny Petrilin <yevgenyp@mellanox.com> Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
The RX rings were cleaned while there was still possible RX traffic completion handling. Change the sequance of events so that the port is closed and the QPs are being stopped before RX cleanup. Signed-off-by:
-
Eugenia Emantayev authored
The port vlan table size is 126 (used for IBoE) so after 126 we will not have space and the user need to see it only in debug print and not error. Signed-off-by:
Aviad Yehezkel <aviadye@mellanox.com> Reviewed-by:
-
Eugenia Emantayev authored
To avoid a race between the open function and everything that happens after register_netdev() move it to be the last operation called. Signed-off-by:
-
Jack Morgenstein authored
There are no counters allocated to the eth device when the port is down, so this query is meaningless at that time. It also leads to querying incorrect counters (since the counter_index is not valid when the device port is down). Signed-off-by:
-
Dotan Barak authored
Wrong condition was used when calling iounmap. Signed-off-by:
-
Hannes Frederic Sowa authored
If the tokenized ip address is re-set on an interface we depend on the arrival of a new router advertisment to call addrconf_verify to clean up the old address (which valid_lft is now set to 0). Old addresses can linger around for a longer time if e.g. the source of router advertisments vanishes. So, call addrconf_verify immediately after setting the new tokenized address to get rid of the old tokenized addresses. Cc: Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
-
Hannes Frederic Sowa authored
The reason behind this change is that as soon as we delete the last ipv6 address of an interface we also lose the /proc/sys/net/ipv6/conf/<interface> directory. This seems to be a usability problem for me. I don't see any reason why we should shutdown ipv6 on that interface in such cases. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Hannes Frederic Sowa authored
This patch splits the timers for duplicate address detection and router solicitations apart. The router solicitations timer goes into inet6_dev and the dad timer stays in inet6_ifaddr. The reason behind this patch is to reduce the number of unneeded router solicitations send out by the host if additional link-local addresses are created. Currently we send out RS for every link-local address on an interface. If the RS timer fires we pick a source address with ipv6_get_lladdr. This change could hurt people adding additional link-local addresses and specifying these addresses in the radvd clients section because we no longer guarantee that we use every ll address as source address in router solicitations. Cc: Flavio Leitner <fleitner@redhat.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David Stevens <dlstevens@us.ibm.com> Signed-off-by:
Flavio Leitner <fbl@redhat.com> Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-nextDavid S. Miller authored
Ben Hutchings says: ==================== 1. Make EEH recovery work when using legacy interrupts, from Alexandre Rames. 2. Enable accelerated RFS for VLAN-tagged flows, from Andy Lutomirski. 3. Improve performance for non-TCP (and particularly UDP) traffic, which regressed in 3.10 when we switched to always allocating paged RX buffers. Partly by Jon Cooper. 4. Some minor bug fixes to IOMMU detection, timestamping capabilities, and IRQ cleanup on the probe failure path. I've dropped the RX skb cache, which improved some benchmarks but perhaps needs some reworking to be more generally useful. ==================== Signed-off-by:
-
