strlcpy() reads the entire source buffer first.
This read may exceed the destination size limit.
This is both inefficient and can lead to linear read
overflows if a source string is not NUL-terminated [1].
In an effort to remove strlcpy() completely [2], replace
strlcpy() here with strscpy().
No return values were used, so direct replacement is safe.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy
[2] https://github.com/KSPP/linux/issues/89Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

PPTP uses pppox sockets (struct pppox_sock). These sockets don't embed
an inet_sock structure, so it's invalid to call inet_sk() on them.

Therefore, the ip_route_output_ports() call in pptp_connect() has two
problems:

  * The tos variable is set with RT_CONN_FLAGS(sk), which calls
    inet_sk() on the pppox socket.

  * ip_route_output_ports() tries to retrieve routing flags using
    inet_sk_flowi_flags(), which is also going to call inet_sk() on the
    pppox socket.

While PPTP doesn't use inet sockets, it's actually really layered on
top of IP and therefore needs a proper way to do fib lookups. So let's
define pptp_route_output() to get a struct rtable from a pptp socket.
Let's also replace the ip_route_output_ports() call of pptp_xmit() for
consistency.

In practice, this means that:

  * pptp_connect() sets ->flowi4_tos and ->flowi4_flags to zero instead
    of using bits of unrelated struct pppox_sock fields.

  * pptp_xmit() now respects ->sk_mark and ->sk_uid.

  * pptp_xmit() now calls the security_sk_classify_flow() security
    hook, thus allowing to set ->flowic_secid.

  * pptp_xmit() now passes the pppox socket to xfrm_lookup_route().

Found by code inspection.

Fixes: 00959ade ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mlxsw_sp_crif_alloc() function returns NULL on error.  It doesn't
return error pointers.  Fix the check.

Fixes: 78126cfd ("mlxsw: spectrum_router: Maintain CRIF for fallback loopback RIF")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The attribute TCA_PEDIT_PARMS_EX is not be included in pedit_policy and
one malicious user could fake a TCA_PEDIT_PARMS_EX whose length is
smaller than the intended sizeof(struct tc_pedit). Hence, the
dereference in tcf_pedit_init() could access dirty heap data.

static int tcf_pedit_init(...)
{
  // ...
  pattr = tb[TCA_PEDIT_PARMS]; // TCA_PEDIT_PARMS is included
  if (!pattr)
    pattr = tb[TCA_PEDIT_PARMS_EX]; // but this is not

  // ...
  parm = nla_data(pattr);

  index = parm->index; // parm is able to be smaller than 4 bytes
                       // and this dereference gets dirty skb_buff
                       // data created in netlink_sendmsg
}

This commit adds TCA_PEDIT_PARMS_EX length in pedit_policy which avoid
the above case, just like the TCA_PEDIT_PARMS.

Fixes: 71d0ed70 ("net/act_pedit: Support using offset relative to the conventional network headers")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://lore.kernel.org/r/20230703110842.590282-1-linma@zju.edu.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The .adjphase operation is an operation that is implemented only by certain
PHCs. The sysfs device attribute node for querying the maximum phase
adjustment supported should not be exposed on devices that do not support
.adjphase.

Fixes: c3b60ab7 ("ptp: Add .getmaxphase callback to ptp_clock_info")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Link: https://lore.kernel.org/netdev/20230627162146.GA114473@dev-arch.thelio-3990X/
Link: https://lore.kernel.org/all/CA+G9fYtKCZeAUTtwe69iK8Xcz1mOKQzwcy49wd+imZrfj6ifXA@mail.gmail.com/Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Message-ID: <20230627232139.213130-1-rrameshbabu@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Switch to the quicinc.com id.

Fixes: bd1af6b5 ("Documentation: ABI: sysfs-class-net-qmi: document pass-through file")
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

request sockets are lockless, __tcp_oow_rate_limited() could be called
on the same object from different cpus. This is harmless.

Add READ_ONCE()/WRITE_ONCE() annotations to avoid a KCSAN report.

Fixes: 4ce7e93c ("tcp: rate limit ACK sent by SYN_RECV request sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jason A. Donenfeld says:

====================
wireguard fixes for 6.4.2/6.5-rc1

Sorry to send these patches during the merge window, but they're net
fixes, not netdev enhancements, and while I'd ordinarily wait anyway,
I just got a first bug report for one of these fixes, which I originally
had thought was mostly unlikely. So please apply the following three
patches to net:

1) Make proper use of nr_cpu_ids with cpumask_next(), rather than
   awkwardly using modulo, to handle dynamic CPU topology changes.
   Linus noticed this a while ago and pointed it out, and today a user
   actually got hit by it.

2) Respect persistent keepalive and other staged packets when setting
   the private key after the interface is already up.

3) Use timer_delete_sync() instead of del_timer_sync(), per the
   documentation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The documentation says that del_timer_sync is obsolete, and code should
use the equivalent timer_delete_sync instead, so switch to it.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Packets bound for peers can queue up prior to the device private key
being set. For example, if persistent keepalive is set, a packet is
queued up to be sent as soon as the device comes up. However, if the
private key hasn't been set yet, the handshake message never sends, and
no timer is armed to retry, since that would be pointless.

But, if a user later sets a private key, the expectation is that those
queued packets, such as a persistent keepalive, are actually sent. So
adjust the configuration logic to account for this edge case, and add a
test case to make sure this works.

Maxim noticed this with a wg-quick(8) config to the tune of:

    [Interface]
    PostUp = wg set %i private-key somefile

    [Peer]
    PublicKey = ...
    Endpoint = ...
    PersistentKeepalive = 25

Here, the private key gets set after the device comes up using a PostUp
script, triggering the bug.

Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Reported-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Tested-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
Link: https://lore.kernel.org/wireguard/87fs7xtqrv.fsf@gmail.com/Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using `% nr_cpumask_bits` is slow and complicated, and not totally
robust toward dynamic changes to CPU topologies. Rather than storing the
next CPU in the round-robin, just store the last one, and also return
that value. This simplifies the loop drastically into a much more common
pattern.

Fixes: e7096c13 ("net: WireGuard secure network tunnel")
Cc: stable@vger.kernel.org
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Manuel Leiner <manuel.leiner@gmx.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each sample script sources functions.sh before parameters.sh
which makes $APPEND undefined when trapping EXIT no matter in
append mode or not. Due to this when sample scripts finished
they always do "pgctrl reset" which resets pktgen config.

So move trap to each script after sourcing parameters.sh
and trap EXIT explicitly.
Signed-off-by: J.J. Martzki <mars14850@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When running Kselftests with the current selftests/net/config
the following problem can be seen with the net:xfrm_policy.sh
selftest:

  # selftests: net: xfrm_policy.sh
  [   41.076721] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
  [   41.094787] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
  [   41.107635] IPv6: ADDRCONF(NETDEV_CHANGE): veth0: link becomes ready
  # modprobe: FATAL: Module ip_tables not found in directory /lib/modules/6.1.36
  # iptables v1.8.7 (legacy): can't initialize iptables table `filter': Table does not exist (do you need to insmod?)
  # Perhaps iptables or your kernel needs to be upgraded.
  # modprobe: FATAL: Module ip_tables not found in directory /lib/modules/6.1.36
  # iptables v1.8.7 (legacy): can't initialize iptables table `filter': Table does not exist (do you need to insmod?)
  # Perhaps iptables or your kernel needs to be upgraded.
  # SKIP: Could not insert iptables rule
  ok 1 selftests: net: xfrm_policy.sh # SKIP

This is because IPsec "policy" match support is not available
to the kernel.

This patch adds CONFIG_NETFILTER_XT_MATCH_POLICY as a module
to the selftests/net/config file, so that `make
kselftest-merge` can take this into consideration.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After blamed commit, we must be more careful about using
skb_transport_offset(), as reminded us by syzbot:

WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 skb_transport_offset include/linux/skbuff.h:2977 [inline]
WARNING: CPU: 0 PID: 10 at include/linux/skbuff.h:2868 perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14
Modules linked in:
CPU: 0 PID: 10 Comm: kworker/u4:1 Not tainted 6.1.30-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet
RIP: 0010:skb_transport_header include/linux/skbuff.h:2868 [inline]
RIP: 0010:skb_transport_offset include/linux/skbuff.h:2977 [inline]
RIP: 0010:perf_trace_net_dev_start_xmit+0x89a/0xce0 include/trace/events/net.h:14
Code: 8b 04 25 28 00 00 00 48 3b 84 24 c0 00 00 00 0f 85 4e 04 00 00 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc e8 56 22 01 fd <0f> 0b e9 f6 fc ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 86 f9 ff
RSP: 0018:ffffc900002bf700 EFLAGS: 00010293
RAX: ffffffff8485d8ca RBX: 000000000000ffff RCX: ffff888100914280
RDX: 0000000000000000 RSI: 000000000000ffff RDI: 000000000000ffff
RBP: ffffc900002bf818 R08: ffffffff8485d5b6 R09: fffffbfff0f8fb5e
R10: 0000000000000000 R11: dffffc0000000001 R12: 1ffff110217d8f67
R13: ffff88810bec7b3a R14: dffffc0000000000 R15: dffffc0000000000
FS: 0000000000000000(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f96cf6d52f0 CR3: 000000012224c000 CR4: 0000000000350ef0
Call Trace:
<TASK>
[<ffffffff84715e35>] trace_net_dev_start_xmit include/trace/events/net.h:14 [inline]
[<ffffffff84715e35>] xmit_one net/core/dev.c:3643 [inline]
[<ffffffff84715e35>] dev_hard_start_xmit+0x705/0x980 net/core/dev.c:3660
[<ffffffff8471a232>] __dev_queue_xmit+0x16b2/0x3370 net/core/dev.c:4324
[<ffffffff85416493>] dev_queue_xmit include/linux/netdevice.h:3030 [inline]
[<ffffffff85416493>] batadv_send_skb_packet+0x3f3/0x680 net/batman-adv/send.c:108
[<ffffffff85416744>] batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127
[<ffffffff853bc52a>] batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:393 [inline]
[<ffffffff853bc52a>] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:421 [inline]
[<ffffffff853bc52a>] batadv_iv_send_outstanding_bat_ogm_packet+0x69a/0x840 net/batman-adv/bat_iv_ogm.c:1701
[<ffffffff8151023c>] process_one_work+0x8ac/0x1170 kernel/workqueue.c:2289
[<ffffffff81511938>] worker_thread+0xaa8/0x12d0 kernel/workqueue.c:2436

Fixes: 66e4c8d9 ("net: warn if transport header was not set")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There was a regression introduced by the blamed commit, where pinging to
a VLAN-unaware bridge would fail with the repeated message "Couldn't
decode source port" coming from the tagging protocol driver.

When receiving packets with a bridge_vid as determined by
dsa_tag_8021q_bridge_join(), dsa_8021q_rcv() will decode:
- source_port = 0 (which isn't really valid, more like "don't know")
- switch_id = 0 (which isn't really valid, more like "don't know")
- vbid = value in range 1-7

Since the blamed patch has reversed the order of the checks, we are now
going to believe that source_port != -1 and switch_id != -1, so they're
valid, but they aren't.

The minimal solution to the problem is to only populate source_port and
switch_id with what dsa_8021q_rcv() came up with, if the vbid is zero,
i.e. the source port information is trustworthy.

Fixes: c1ae02d8 ("net: dsa: tag_sja1105: always prefer source port information from INCL_SRCPT")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

According to the synchronization rules for .ndo_get_stats() as seen in
Documentation/networking/netdevices.rst, acquiring a plain spin_lock()
should not be illegal, but the bridge driver implementation makes it so.

After running these commands, I am being faced with the following
lockdep splat:

$ ip link add link swp0 name macsec0 type macsec encrypt on && ip link set swp0 up
$ ip link add dev br0 type bridge vlan_filtering 1 && ip link set br0 up
$ ip link set macsec0 master br0 && ip link set macsec0 up

  ========================================================
  WARNING: possible irq lock inversion dependency detected
  6.4.0-04295-g31b577b4bd4a #603 Not tainted
  --------------------------------------------------------
  swapper/1/0 just changed the state of lock:
  ffff6bd348724cd8 (&br->lock){+.-.}-{3:3}, at: br_forward_delay_timer_expired+0x34/0x198
  but this lock took another, SOFTIRQ-unsafe lock in the past:
   (&ocelot->stats_lock){+.+.}-{3:3}

  and interrupts could create inverse lock ordering between them.

  other info that might help us debug this:
  Chain exists of:
    &br->lock --> &br->hash_lock --> &ocelot->stats_lock

   Possible interrupt unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(&ocelot->stats_lock);
                                 local_irq_disable();
                                 lock(&br->lock);
                                 lock(&br->hash_lock);
    <Interrupt>
      lock(&br->lock);

   *** DEADLOCK ***

(details about the 3 locks skipped)

swp0 is instantiated by drivers/net/dsa/ocelot/felix.c, and this
only matters to the extent that its .ndo_get_stats64() method calls
spin_lock(&ocelot->stats_lock).

Documentation/locking/lockdep-design.rst says:

| A lock is irq-safe means it was ever used in an irq context, while a lock
| is irq-unsafe means it was ever acquired with irq enabled.

(...)

| Furthermore, the following usage based lock dependencies are not allowed
| between any two lock-classes::
|
|    <hardirq-safe>   ->  <hardirq-unsafe>
|    <softirq-safe>   ->  <softirq-unsafe>

Lockdep marks br->hash_lock as softirq-safe, because it is sometimes
taken in softirq context (for example br_fdb_update() which runs in
NET_RX softirq), and when it's not in softirq context it blocks softirqs
by using spin_lock_bh().

Lockdep marks ocelot->stats_lock as softirq-unsafe, because it never
blocks softirqs from running, and it is never taken from softirq
context. So it can always be interrupted by softirqs.

There is a call path through which a function that holds br->hash_lock:
fdb_add_hw_addr() will call a function that acquires ocelot->stats_lock:
ocelot_port_get_stats64(). This can be seen below:

ocelot_port_get_stats64+0x3c/0x1e0
felix_get_stats64+0x20/0x38
dsa_slave_get_stats64+0x3c/0x60
dev_get_stats+0x74/0x2c8
rtnl_fill_stats+0x4c/0x150
rtnl_fill_ifinfo+0x5cc/0x7b8
rtmsg_ifinfo_build_skb+0xe4/0x150
rtmsg_ifinfo+0x5c/0xb0
__dev_notify_flags+0x58/0x200
__dev_set_promiscuity+0xa0/0x1f8
dev_set_promiscuity+0x30/0x70
macsec_dev_change_rx_flags+0x68/0x88
__dev_set_promiscuity+0x1a8/0x1f8
__dev_set_rx_mode+0x74/0xa8
dev_uc_add+0x74/0xa0
fdb_add_hw_addr+0x68/0xd8
fdb_add_local+0xc4/0x110
br_fdb_add_local+0x54/0x88
br_add_if+0x338/0x4a0
br_add_slave+0x20/0x38
do_setlink+0x3a4/0xcb8
rtnl_newlink+0x758/0x9d0
rtnetlink_rcv_msg+0x2f0/0x550
netlink_rcv_skb+0x128/0x148
rtnetlink_rcv+0x24/0x38

the plain English explanation for it is:

The macsec0 bridge port is created without p->flags & BR_PROMISC,
because it is what br_manage_promisc() decides for a VLAN filtering
bridge with a single auto port.

As part of the br_add_if() procedure, br_fdb_add_local() is called for
the MAC address of the device, and this results in a call to
dev_uc_add() for macsec0 while the softirq-safe br->hash_lock is taken.

Because macsec0 does not have IFF_UNICAST_FLT, dev_uc_add() ends up
calling __dev_set_promiscuity() for macsec0, which is propagated by its
implementation, macsec_dev_change_rx_flags(), to the lower device: swp0.
This triggers the call path:

dev_set_promiscuity(swp0)
-> rtmsg_ifinfo()
   -> dev_get_stats()
      -> ocelot_port_get_stats64()

with a calling context that lockdep doesn't like (br->hash_lock held).

Normally we don't see this, because even though many drivers that can be
bridge ports don't support IFF_UNICAST_FLT, we need a driver that

(a) doesn't support IFF_UNICAST_FLT, *and*
(b) it forwards the IFF_PROMISC flag to another driver, and
(c) *that* driver implements ndo_get_stats64() using a softirq-unsafe
    spinlock.

Condition (b) is necessary because the first __dev_set_rx_mode() calls
__dev_set_promiscuity() with "bool notify=false", and thus, the
rtmsg_ifinfo() code path won't be entered.

The same criteria also hold true for DSA switches which don't report
IFF_UNICAST_FLT. When the DSA master uses a spin_lock() in its
ndo_get_stats64() method, the same lockdep splat can be seen.

I think the deadlock possibility is real, even though I didn't reproduce
it, and I'm thinking of the following situation to support that claim:

fdb_add_hw_addr() runs on a CPU A, in a context with softirqs locally
disabled and br->hash_lock held, and may end up attempting to acquire
ocelot->stats_lock.

In parallel, ocelot->stats_lock is currently held by a thread B (say,
ocelot_check_stats_work()), which is interrupted while holding it by a
softirq which attempts to lock br->hash_lock.

Thread B cannot make progress because br->hash_lock is held by A. Whereas
thread A cannot make progress because ocelot->stats_lock is held by B.

When taking the issue at face value, the bridge can avoid that problem
by simply making the ports promiscuous from a code path with a saner
calling context (br->hash_lock not held). A bridge port without
IFF_UNICAST_FLT is going to become promiscuous as soon as we call
dev_uc_add() on it (which we do unconditionally), so why not be
preemptive and make it promiscuous right from the beginning, so as to
not be taken by surprise.

With this, we've broken the links between code that holds br->hash_lock
or br->lock and code that calls into the ndo_change_rx_flags() or
ndo_get_stats64() ops of the bridge port.

Fixes: 2796d0c6 ("bridge: Automatically manage port promiscuous mode.")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Hariprasad Kelam says:

====================
octeontx2-af: MAC block fixes for CN10KB

This patch set contains fixes for the issues encountered in testing
CN10KB MAC block RPM_USX.

Patch1: firmware to kernel communication is not working due to wrong
        interrupt configuration. CSR addresses are corrected.

Patch2: NIX to RVU PF mapping errors encountered due to wrong firmware
        config. Corrects this mapping error.

Patch3: Driver is trying to access non exist cgx/lmac which is resulting
        in kernel panic. Address this issue by adding proper checks.

Patch4: MAC features are not getting reset on FLR. Fix the issue by
        resetting the stale config.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

AF driver configures MAC features like internal loopback and PFC upon
receiving the request from PF and its VF netdev. But these
features are not getting reset in FLR.  This patch fixes the issue by
resetting the same.

Fixes: 23999b30 ("octeontx2-af: Enable or disable CGX internal loopback")
Fixes: 1121f6b0 ("octeontx2-af: Priority flow control configuration support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

with the addition of new MAC blocks like CN10K RPM and CN10KB
RPM_USX, LMACs are noncontiguous and CGX blocks are also
noncontiguous. But during RVU driver initialization, the driver
is assuming they are contiguous and trying to access
cgx or lmac with their id which is resulting in kernel panic.

This patch fixes the issue by adding proper checks.

[   23.219150] pc : cgx_lmac_read+0x38/0x70
[   23.219154] lr : rvu_program_channels+0x3f0/0x498
[   23.223852] sp : ffff000100d6fc80
[   23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[   23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:
fffffffffff0f000

Fixes: 91c6945e ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Firmware configures NIX block mapping for all MAC blocks.
The current implementation reads the configuration and
creates the mapping between RVU PF  and NIX blocks. But
this configuration is only valid for silicons that support
multiple blocks. For all other silicons, all MAC blocks
map to NIX0.

This patch corrects the mapping by adding a check for the same.

Fixes: c5a73b63 ("octeontx2-af: Map NIX block from CGX connection")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current design is that, for asynchronous events like link_up and
link_down firmware raises the interrupt to kernel. The previous patch
which added RPM_USX driver has a bug where it uses old csr addresses
for configuring interrupts. Which is resulting in losing interrupts
from source firmware.

This patch fixes the issue by correcting csr addresses.

Fixes: b9d0fedc ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a comma that should be a semicolon.  The comma is at the end of an
if-body and thus makes the statement after (a bvec_set_page()) conditional
too, resulting in an oops because we didn't fill out the bio_vec[]:

    BUG: kernel NULL pointer dereference, address: 0000000000000008
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    ...
    Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
    RIP: 0010:skb_splice_from_iter+0xf1/0x370
    ...
    Call Trace:
     tcp_sendmsg_locked+0x3a6/0xdd0
     tcp_sendmsg+0x31/0x50
     inet_sendmsg+0x47/0x80
     sock_sendmsg+0x99/0xb0
     nvme_tcp_try_send_data+0x149/0x490 [nvme_tcp]
     nvme_tcp_try_send+0x1b7/0x300 [nvme_tcp]
     nvme_tcp_io_work+0x40/0xc0 [nvme_tcp]
     process_one_work+0x21c/0x430
     worker_thread+0x54/0x3e0
     kthread+0xf8/0x130

Fixes: 77698878 ("nvme-tcp: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage")
Reported-by: Aurelien Aptel <aaptel@nvidia.com>
Link: https://lore.kernel.org/r/253mt0il43o.fsf@mtr-vdi-124.i-did-not-set--mail-host-address--so-tickle-me/Signed-off-by: David Howells <dhowells@redhat.com>
cc: Sagi Grimberg <sagi@grimberg.me>
cc: Willem de Bruijn <willemb@google.com>
cc: Keith Busch <kbusch@kernel.org>
cc: Jens Axboe <axboe@fb.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Chaitanya Kulkarni <kch@nvidia.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-nvme@lists.infradead.org
cc: netdev@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

source.codeaurora.org is no longer accessible and so the reference link
in the documentation is not useful. Use iproute2 instead as it has a
rmnet module for configuration.

Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reword slightly now that all MAINTAINERS have access to the commands.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add CDC-ECM support for LARA-R6 01B.

The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 configurations (default, RmNet, ECM)
are the same.

In CDC-ECM mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The line cards array is not freed in the error path of
mlxsw_m_linecards_init(), which can lead to a memory leak. Fix by
freeing the array in the error path, thereby making the error path
identical to mlxsw_m_linecards_fini().

Fixes: 01328e23 ("mlxsw: minimal: Extend module to port mapping with slot index")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230630012647.1078002-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Switch in MAXLEN register stores the maximum size of a data frame.
The MTU size is 18 bytes smaller than the frame size.

The current settings are causing problems with packet forwarding.
This patch fixes the MTU settings to proper values.

Fixes: fb77ffc6 ("net: dsa: vsc73xx: make the MTU configurable")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230628194327.1765644-1-paweldembicki@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

All ibmvnic resets, make a call to netdev_tx_reset_queue() when
re-opening the device. netdev_tx_reset_queue() resets the num_queued
and num_completed byte counters. These stats are used in Byte Queue
Limit (BQL) algorithms. The difference between these two stats tracks
the number of bytes currently sitting on the physical NIC. ibmvnic
increases the number of queued bytes though calls to
netdev_tx_sent_queue() in the drivers xmit function. When, VIOS reports
that it is done transmitting bytes, the ibmvnic device increases the
number of completed bytes through calls to netdev_tx_completed_queue().
It is important to note that the driver batches its transmit calls and
num_queued is increased every time that an skb is added to the next
batch, not necessarily when the batch is sent to VIOS for transmission.

Unlike other reset types, a NON FATAL reset will not flush the sub crq
tx buffers. Therefore, it is possible for the batched skb array to be
partially full. So if there is call to netdev_tx_reset_queue() when
re-opening the device, the value of num_queued (0) would not account
for the skb's that are currently batched. Eventually, when the batch
is sent to VIOS, the call to netdev_tx_completed_queue() would increase
num_completed to a value greater than the num_queued. This causes a
BUG_ON crash:

ibmvnic 30000002: Firmware reports error, cause: adapter problem.
Starting recovery...
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:27!
Oops: Exception in kernel mode, sig: 5
[....]
NIP dql_completed+0x28/0x1c0
LR ibmvnic_complete_tx.isra.0+0x23c/0x420 [ibmvnic]
Call Trace:
ibmvnic_complete_tx.isra.0+0x3f8/0x420 [ibmvnic] (unreliable)
ibmvnic_interrupt_tx+0x40/0x70 [ibmvnic]
__handle_irq_event_percpu+0x98/0x270
---[ end trace ]---

Therefore, do not reset the dql stats when performing a NON_FATAL reset.

Fixes: 0d973388 ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

On systems without MAE permission efx->mae is not initialised,
and trying to lookup an mport results in a NULL pointer
dereference.

Fixes: 25414b2a ("sfc: add devlink port support for ef100")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cherry-pick what looks like safe fixes from the bluetooth
net-next PR. The other changes will have to wait for 6.6

Link: https://lore.kernel.org/all/20230627191004.2586540-1-luiz.dentz@gmail.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The ISO Interval on CIS Established Event uses 1.25 ms slots:

    BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
    page 2304:

      Time = N * 1.25 ms

In addition to that this always update the QoS settings based on CIS
Established Event.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use kmemdup rather than duplicating its implementation.

./net/bluetooth/hci_conn.c:1880:7-14: WARNING opportunity for kmemdup.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5597Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Adding the device ID from the Asus Ally gets the bluetooth working
on the device.
Signed-off-by: Matthew Anderson <ruinairas1992@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Now that the driver core allows for struct class to be in read-only
memory, move the bt_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This rework sync_interval to be sync_factor as having sync_interval in
the order of seconds is sometimes not disarable.

Wit sync_factor the application can tell how many SDU intervals it wants
to send an announcement with PA, the EA interval is set to 2 times that
so a factor of 24 of BIG SDU interval of 10ms would look like the
following:

< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
        Handle: 0x01
        Properties: 0x0000
        Min advertising interval: 480.000 msec (0x0300)
        Max advertising interval: 480.000 msec (0x0300)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x01)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: Host has no preference (0x7f)
        Primary PHY: LE 1M (0x01)
        Secondary max skip: 0x00
        Secondary PHY: LE 2M (0x02)
        SID: 0x00
        Scan request notifications: Disabled (0x00)
< HCI Command: LE Set Periodic Advertising Parameters (0x08|0x003e) plen 7
        Handle: 1
        Min interval: 240.00 msec (0x00c0)
        Max interval: 240.00 msec (0x00c0)
        Properties: 0x0000
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When receiving a scan response there is no way to know if the remote
device is connectable or not, so when it cannot be merged don't
make any assumption and instead just mark it with a new flag defined as
MGMT_DEV_FOUND_SCAN_RSP so userspace can tell it is a standalone
SCAN_RSP.

Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+CYMsDSPTxBn09Js3BcdC-x7vZFfyLJ3ppZGGwJKmUTw@mail.gmail.com/
Fixes: c70a7e4c ("Bluetooth: Add support for Not Connectable flag for Device Found events")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the event has error status, return right error code and don't show
incorrect "response malformed" messages.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When reconfiguring CIG after disconnection of the last CIS, LE Remove
CIG shall be sent before LE Set CIG Parameters.  Otherwise, it fails
because CIG is in the inactive state and not configurable (Core v5.3
Vol 6 Part B Sec. 4.5.14.3). This ordering is currently wrong under
suitable timing conditions, because LE Remove CIG is sent via the
hci_sync queue and may be delayed, but Set CIG Parameters is via
hci_send_cmd.

Make the ordering well-defined by sending also Set CIG Parameters via
hci_sync.

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A recent commit restored the original (and still documented) semantics
for the HCI_QUIRK_USE_BDADDR_PROPERTY quirk so that the device address
is considered invalid unless an address is provided by firmware.

This specifically means that this flag must only be set for devices with
invalid addresses, but the Broadcom driver has so far been setting this
flag unconditionally.

Fortunately the driver already checks for invalid addresses during setup
and sets the HCI_QUIRK_INVALID_BDADDR flag. Use this flag to indicate
when the address can be overridden by firmware (long term, this should
probably just always be allowed).

Fixes: 6945795b ("Bluetooth: fix use-bdaddr-property quirk")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/lkml/ecef83c8-497f-4011-607b-a63c24764867@samsung.comSigned-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

l2cap_sock_release(sk) frees sk. However, sk's children are still alive
and point to the already free'd sk's address.
To fix this, l2cap_sock_release(sk) also cleans sk's children.

==================================================================
BUG: KASAN: use-after-free in l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
Read of size 8 at addr ffff888104617aa8 by task kworker/u3:0/276

CPU: 0 PID: 276 Comm: kworker/u3:0 Not tainted 6.2.0-00001-gef397bd4d5fb-dirty #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci2 hci_rx_work
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x72/0x95 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:306 [inline]
 print_report+0x175/0x478 mm/kasan/report.c:417
 kasan_report+0xb1/0x130 mm/kasan/report.c:517
 l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
 l2cap_chan_ready+0x10e/0x1e0 net/bluetooth/l2cap_core.c:1386
 l2cap_config_req+0x753/0x9f0 net/bluetooth/l2cap_core.c:4480
 l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5739 [inline]
 l2cap_sig_channel net/bluetooth/l2cap_core.c:6509 [inline]
 l2cap_recv_frame+0xe2e/0x43c0 net/bluetooth/l2cap_core.c:7788
 l2cap_recv_acldata+0x6ed/0x7e0 net/bluetooth/l2cap_core.c:8506
 hci_acldata_packet net/bluetooth/hci_core.c:3813 [inline]
 hci_rx_work+0x66e/0xbc0 net/bluetooth/hci_core.c:4048
 process_one_work+0x4ea/0x8e0 kernel/workqueue.c:2289
 worker_thread+0x364/0x8e0 kernel/workqueue.c:2436
 kthread+0x1b9/0x200 kernel/kthread.c:376
 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
 </TASK>

Allocated by task 288:
 kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 ____kasan_kmalloc mm/kasan/common.c:374 [inline]
 __kasan_kmalloc+0x82/0x90 mm/kasan/common.c:383
 kasan_kmalloc include/linux/kasan.h:211 [inline]
 __do_kmalloc_node mm/slab_common.c:968 [inline]
 __kmalloc+0x5a/0x140 mm/slab_common.c:981
 kmalloc include/linux/slab.h:584 [inline]
 sk_prot_alloc+0x113/0x1f0 net/core/sock.c:2040
 sk_alloc+0x36/0x3c0 net/core/sock.c:2093
 l2cap_sock_alloc.constprop.0+0x39/0x1c0 net/bluetooth/l2cap_sock.c:1852
 l2cap_sock_create+0x10d/0x220 net/bluetooth/l2cap_sock.c:1898
 bt_sock_create+0x183/0x290 net/bluetooth/af_bluetooth.c:132
 __sock_create+0x226/0x380 net/socket.c:1518
 sock_create net/socket.c:1569 [inline]
 __sys_socket_create net/socket.c:1606 [inline]
 __sys_socket_create net/socket.c:1591 [inline]
 __sys_socket+0x112/0x200 net/socket.c:1639
 __do_sys_socket net/socket.c:1652 [inline]
 __se_sys_socket net/socket.c:1650 [inline]
 __x64_sys_socket+0x40/0x50 net/socket.c:1650
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

Freed by task 288:
 kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 kasan_save_free_info+0x2e/0x50 mm/kasan/generic.c:523
 ____kasan_slab_free mm/kasan/common.c:236 [inline]
 ____kasan_slab_free mm/kasan/common.c:200 [inline]
 __kasan_slab_free+0x10a/0x190 mm/kasan/common.c:244
 kasan_slab_free include/linux/kasan.h:177 [inline]
 slab_free_hook mm/slub.c:1781 [inline]
 slab_free_freelist_hook mm/slub.c:1807 [inline]
 slab_free mm/slub.c:3787 [inline]
 __kmem_cache_free+0x88/0x1f0 mm/slub.c:3800
 sk_prot_free net/core/sock.c:2076 [inline]
 __sk_destruct+0x347/0x430 net/core/sock.c:2168
 sk_destruct+0x9c/0xb0 net/core/sock.c:2183
 __sk_free+0x82/0x220 net/core/sock.c:2194
 sk_free+0x7c/0xa0 net/core/sock.c:2205
 sock_put include/net/sock.h:1991 [inline]
 l2cap_sock_kill+0x256/0x2b0 net/bluetooth/l2cap_sock.c:1257
 l2cap_sock_release+0x1a7/0x220 net/bluetooth/l2cap_sock.c:1428
 __sock_release+0x80/0x150 net/socket.c:650
 sock_close+0x19/0x30 net/socket.c:1368
 __fput+0x17a/0x5c0 fs/file_table.c:320
 task_work_run+0x132/0x1c0 kernel/task_work.c:179
 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203
 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
 syscall_exit_to_user_mode+0x21/0x50 kernel/entry/common.c:296
 do_syscall_64+0x4c/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

The buggy address belongs to the object at ffff888104617800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 680 bytes inside of
 1024-byte region [ffff888104617800, ffff888104617c00)

The buggy address belongs to the physical page:
page:00000000dbca6a80 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888104614000 pfn:0x104614
head:00000000dbca6a80 order:2 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0
flags: 0x200000000010200(slab|head|node=0|zone=2)
raw: 0200000000010200 ffff888100041dc0 ffffea0004212c10 ffffea0004234b10
raw: ffff888104614000 0000000000080002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888104617980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888104617a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888104617a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                  ^
 ffff888104617b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888104617b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Ack: This bug is found by FuzzBT with a modified Syzkaller. Other
contributors are Ruoyu Wu and Hui Peng.
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>