- 07 Apr, 2016 11 commits
-
-
Shannon Nelson authored
The logic that checks AQ events for NVM done events is better kept in nvm.c with the rest of the nvmupdate handling code. Change-ID: I2ea58980df8ecaa3726b28a37bff3dfcb8df03dc Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Mitch Williams authored
Add opcodes and structures to support RSS configuration by PF driver on behalf of the VF drivers. This reduces complexity in the VF driver and allows us to support future hardware designs without modifying the VF driver. Change-ID: I8c75765c630eacb71f95967f1109a198542593ac Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Shannon Nelson authored
The NVM update status info should stay collected together, not spread across different structs. Change-ID: Ic16f9e9fd79945d865bb7226184c889884585025 Signed-off-by:
-
Shannon Nelson authored
The VFs can request their queues to be set up into polling mode, rather than interrupt mode, which works well for supporting things like DPDK, but this should not be available when working in an multi-function support device. Change-ID: Id36792e4e7422db8f2033336507211f68f14ff6f Signed-off-by:
-
Anjali Singhai Jain authored
This patch adds hook to support changing a VF from not-trusted to trusted and vice-versa. Fixed the wrappers and function prototype. Changed the dmesg to reflex the current state better. This patch also disables turning on/off trusted VF in MFP mode. Change-ID: Ibcd910935c01f0be1f3fdd6d427230291ee92ebe Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
-
Jesse Brandeburg authored
As it turns out, calling into other files from hot path hurts performance a lot. In this case the majority of the time we call "check FCoE" and the packet is *not* FCoE, but this call was taking 5% of our total cycles spent on receive. Change-ID: I080552c26e7060bc7b78504dc2763f6f0b3d8c76 Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Jesse Brandeburg authored
Some of the tx_ring arguments can be deleted since they are not used. Change-ID: I99275b0f191d7f63ec2f05061919904940c36f31 Signed-off-by:
-
Jesse Brandeburg authored
A local variable could move down inside the context where it is used. Change-ID: I9caba9e1eacf921037077f2665cbce83fd8e95d6 Signed-off-by:
-
Akeem G Abodunrin authored
This patch moves the HW flush routine to the end of the reset flow, after the completion of writing to the device VFLR registers- the benefit is to avoid problems in the passthrough routines. Change-ID: Ieb56866f21895e6c1fc514b7328c3df79807a57c Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by:
-
Shannon Nelson authored
Don't set our internal debug_mask at startup unless we get specific signal to from the debug module parameter. This should take care of the issue with all the device capabilities getting printed even when we hadn't asked for the debug info. Change-ID: I7fbc6bd8b11ed9b0631ec018ff36015a04100b6c Signed-off-by:
-
Deepthi Kavalur authored
Display MSIx vector count for HW capabilities. Change-ID: I4b41e9b50360cf660e7fbcb85b9390fedcf313b1 Signed-off-by:
Deepthi Kavalur <deepthi.kavalur@intel.com> Tested-by:
-
- 06 Apr, 2016 29 commits
-
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Introduce support for Data Center Bridging Ido says: This patchset introduces support for Quality of Service (QoS) as part of the IEEE Data Center Bridiging (DCB) standards. Patches 1-9 do the required device initialization. Specifically, patches 1-6 initialize the ports' headroom buffers, which are used at ingress to store incoming packets while they go through the switch's pipeline. Patches 7-9 complete them by initializing the egress scheduling. The pipeline mentioned above determines the packet's egress port(s) and traffic class. Ideally, once out of the pipeline the packet moves to the switch's shared buffer (to be introduced in Jiri's patchset, currently default values are used) and scheduled for transmission according to its traffic class. The egress scheduling is configured according to the 802.1Qaz standard, which is part of the DCB infrastructure supported by Linux. This is introduced in patches 10-12. Even after going through the pipeline packets are not always eligible to enter the shared buffer. This is determined by the amount of available space and the quotas associated with the packet. However, if flow control is enabled and the packet is associated with the lossless flow, then it will stay in the headroom and won't be discarded. This is introduced in patches 13-17. Please check individual commit messages for more info, as I tried to keep them pretty detailed. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Implement the appropriate DCB ops and allow a user to configure certain traffic classes as lossless. The operation configures PFC for both the egress (respecting PFC frames) and ingress (sending PFC frames) parts of the port. At egress, when a PFC frame is received for a PFC enabled priority, then all the priorities mapped to the same TC are stopped. At ingress, the priority group (PG) buffers to which the enabled PFC priorities are mapped are configured to be lossless. PFC frames will be transmitted when the Xoff threshold is crossed. The user-supplied delay parameter is used to determine the PG's size according to the following formula: PG_SIZE = PG_SIZE_LOSSY + delay * CELL_FACTOR + MTU In the worst case scenario the delay will be made up of packets that are all of size CELL_SIZE + 1, which means each packet will require almost twice its true size when buffered in the switch. We therefore multiply this value by the "cell factor", which is close to 2. Another MTU is added in case the transmitting host already started transmitting a maximum length frame when the PFC packet was received. As with PAUSE enabled ports, when the port's MTU is changed both the PGs' size and threshold are adjusted accordingly. Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
We are going to add support for PFC as part of DCB ops, which requires us to report the number of PFC frames sent and received per priority. Add per priority counters in order to report number of PFC frames sent and received per priority. Signed-off-by:
-
Ido Schimmel authored
When a packet ingress the switch it's placed in its assigned priority group (PG) buffer in the port's headroom buffer while it goes through the switch's pipeline. After going through the pipeline - which determines its egress port(s) and traffic class - it's moved to the switch's shared buffer awaiting transmission. However, some packets are not eligible to enter the shared buffer due to exceeded quotas or insufficient space. Marking their associated PGs as lossless will cause the packets to accumulate in the PG buffer. Another reason for packets accumulation are complicated pipelines (e.g. involving a lot of ACLs). To prevent packets from being dropped a user can enable PAUSE frames on the port. This will mark all the active PGs as lossless and set their size according to the maximum delay, as it's not configured by user. +----------------+ + | | | | | | | | | | | | | | | | | | Delay | | | | | | | | | | | | | | | Xon/Xoff threshold +----------------+ + | | | | | | 2 * MTU | | | +----------------+ + The delay (612 [Cells]) was calculated according to worst-case scenario involving maximum MTU and 100m cables. After marking the PGs as lossless the device is configured to respect incoming PAUSE frames (Rx PAUSE) and generate PAUSE frames (Tx PAUSE) according to user's settings. Whenever the port's headroom configuration changes we take into account the PAUSE configuration, so that we correctly set the PG's type (lossy / lossless), size and threshold. This can happen when: a) The port's MTU changes, as it directly affects the PG's size. b) A PG is created following user configuration, by binding a priority to it. Note that the relevant SUPPORTED flags were already mistakenly set by the driver before this commit. Signed-off-by: -
Ido Schimmel authored
When configuring PAUSE frames and PFC we'll need to configure the Xon/Xoff threshold for the priority group (PG) buffers. Add the Xon/Xoff threshold fields to the PBMC register so that we can configure these when needed. Signed-off-by:
-
Ido Schimmel authored
Add the Port Flow Control Configuration (PFCC) register, which configures both flow control and Priority-based Flow Control (PFC). Signed-off-by:
-
Ido Schimmel authored
Allow a user to set maximum rate for a particular TC using DCB ops. Signed-off-by:
-
Ido Schimmel authored
Implement the appropriate DCB ops and allow a user to configure: * Priority to traffic class (TC) mapping with a total of 8 supported TCs * Transmission selection algorithm (TSA) for each TC and the corresponding weights in case of weighted round robin (WRR) As previously explained, we treat the priority group (PG) buffer in the port's headroom as the ingress counterpart of the egress TC. Therefore, when a certain priority to TC mapping is configured, we also configure the port's headroom buffer. Signed-off-by:
-
Ido Schimmel authored
Introduce basic infrastructure for DCB and add the missing ops in following patches. Signed-off-by:
-
Ido Schimmel authored
Before introducing support for DCB ops we should first make sure we initialize the relevant parts in the device correctly. Specifically, the egress scheduling. The device supports a superset of the 802.1Qaz standard with 4 hierarchy levels that can be linked to each other in multiple ways and with different transmission selection algorithms (TSA) employed between them. However, since we only intend to support the 802.1Qaz standard we flatten the hierarchies and let the user configure via DCB ops the TSA and max rate shaper at the subgroup hierarchy (see figure below) and the mapping between switch priority to traffic class. By default, all switch priorities are mapped to traffic class 0, strict priority is employed and max shaper is disabled. Default configuration: switch priority 0 ... switch priority 7 + + | | +----------------------------------+ | +--v--+ +-----+ Traffic Class | | | | Hierarchy | TC0 | ... | TC7 | | | | | +--+--+ +--+--+ | | +--v--+ +--v--+ Subgroup | SG0 | | SG7 | Hierarchy | | | | +-----+ +-----+ | TSA | | TSA | +-----+ ... +-----+ | MAX | | MAX | +--+--+ +--+--+ | | +---------------+----------------+ | +--v--+ Group | | Hierarchy | GR0 | | | +--+--+ | +--v--+ Port | | Hierarchy | PR0 | | | +-----+ Signed-off-by: -
Ido Schimmel authored
As part of DCB ops we'll have to configure the priority to traffic class mapping of a port. Add the QoS Switch Traffic Class Table (QTCT) register, which configures the mapping between the packet switch priority and traffic class on the transmit port. Signed-off-by:
-
Ido Schimmel authored
We are going to introduce support for DCB, so we need to be able to configure the traffic selection algorithm (TSA) used by each traffic class (TC), as well as the bandwidth percentage allocated to each TC in case of ETS. Add the QoS ETS Element Configuration register, which controls the above parameters. Signed-off-by:
-
Ido Schimmel authored
In addition to the priority group (PG) buffers in the headroom, the device enables the allocation of headroom shared buffer, which can be shared between different PGs. However, we are not going to use the headroom shared buffer and instead allow the user to use its size for PGs or the switch's shared buffer. Signed-off-by:
-
Ido Schimmel authored
The last field of the PBMC register is at offset 0x64 and its size is 0x8, so the correct register's length is 0x6C bytes. Signed-off-by:
-
Ido Schimmel authored
When packets ingress the switch they are assigned a switch priority and directed to the corresponding priority group (PG) buffer in the port's headroom buffer. Since we now map all switch priorities to priority group 0 (PG0) by default, there is no need to allocate the other priority groups during initialization. The only exception is PG9, which is used for control traffic. At minimum, the PG should be able to store the currently classified packet (pipeline latency isn't 0) and also the packets arriving during the classification time. However, an incoming packet will not be buffered if there is no available MTU-sized buffer space for storing it. The buffer needed to accommodate for pipeline latency is variable and needs to take into account both the current link speed and current latency of the pipeline, which is time-dependent. Testing showed that setting the PG's size to twice the current MTU is optimal. Since PG9 is used strictly for control packets and not subject to flow control, we are not going to resize it according to user configuration, so we simply set it according to worst case scenario, which is twice the maximum MTU. In any case, later patches in the series will allow a user to direct lossless flows to other PGs than PG0 and set their size to accommodate for round-trip propagation delay. The above change also requires us to resize the PG buffer whenever the port's MTU is changed. Signed-off-by:
-
Ido Schimmel authored
Buffers in the switch store packets in units called buffer cells. Add a helper to convert from bytes to cells, so that the actual number of cells required (result is round up) is returned. Also, drop the SB (shared buffer) acronym from the BYTES_PER_CELL macro, as this unit is also used in the ports' buffers and not only the switch's shared buffer. Signed-off-by:
-
Ido Schimmel authored
During transmission, the skb's priority is used to map the skb to a traffic class, where the idea is to group priorities with similar characteristics (e.g. lossy, lossless) to the same traffic class. By default, all priorities are mapped to traffic class 0. In the device, we model the skb's priority as the switch priority, which is assigned to a packet according to its PCP value and ingress port (untagged packets are assigned the port's default switch priority - 0). At ingress, the packet is directed to a priority group (PG) buffer in the port's headroom buffer according to the packet's switch priority and switch priority to buffer mapping. While it's possible to configure the egress mapping between skb's priority (switch priority) and traffic class, there is no mechanism to configure the ingress mapping to a PG. In order to keep things simple and since grouping certain priorities into a traffic class at egress also implies they should be grouped the same at ingress, treat a PG as the ingress counterpart of an egress traffic class. Having established the above, during initialization map all the switch priorities to PG0 in accordance with the Linux defaults for traffic class mapping. Signed-off-by:
-
Ido Schimmel authored
When packets ingress the switch they are assigned a switch priority number that dictates the packet's priority group (PG) buffer in the port's headroom buffer. Add the Port Prio To Buffer (PPTB) register, which configures the switch priority to PG mapping. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-04-05 This series contains updates to i40e and i40evf only. Colin Ian King cleaned up a redundant NULL check which was found by static analysis. Anjali enables geneve receive offload for XL710/X710 devices. Mitch cleans up unused variable in i40e_vc_get_vf_resources_msg(). Fixed the driver to actually be able to adjust VLAN tagging features through ethtool, as expected. Fixed a problem where VF resets would get lost by the PF preventing the VF driver from initializing. Also put users mind at ease by lowering some message levels since many of these conditions can happen any time VFs are enabled or disabled and are not really indicative a fatal problems, unless they happen continuously. Shannon disables the link polling to lessen the admin queue traffic especially since the link event mask usage has been fixed recently. Alex Duyck fixes the i40e and i40evf drivers to correctly update checksums for frames up to 16776960 in length which should be more than large enough for all possible TSO frames in the near future. ==================== Signed-off-by: -
David S. Miller authored
Jiri Benc says: ==================== vxlan: implement Generic Protocol Extension (GPE) v3: just rebased on top of the current net-next, no changes This patchset implements VXLAN-GPE. It follows the same model as the tun/tap driver: depending on the chosen mode, the vxlan interface is created either as ARPHRD_ETHER (non-GPE) or ARPHRD_NONE (GPE). Note that the internal fdb control plane cannot be used together with VXLAN-GPE and attempt to configure it will be rejected by the driver. In fact, COLLECT_METADATA is required to be set for now. This can be relaxed in the future by adding support for static PtP configuration; it will be backward compatible and won't affect existing users. The previous version of the patchset supported two GPE modes, L2 and L3. The L2 mode (now called "ether mode" in the code) was removed from this version. It can be easily added later if there's demand. The L3 mode is now called "raw mode" and supports also encapsulated Ethernet headers (via ETH_P_TEB). The only limitation of not having "ether mode" for GPE is for ip route based encapsulation: with such setup, only IP packets can be encapsulated. Meaning no Ethernet encapsulation. It seems there's not much use for this, though. If it turns out to be useful, we'll add it. ==================== Signed-off-by: -
Jiri Benc authored
Implement VXLAN-GPE. Only COLLECT_METADATA is supported for now (it is possible to support static configuration, too, if there is demand for it). The GPE header parsing has to be moved before iptunnel_pull_header, as we need to know the protocol. v2: Removed what was called "L2 mode" in v1 of the patchset. Only "L3 mode" (now called "raw mode") is added by this patch. This mode does not allow Ethernet header to be encapsulated in VXLAN-GPE when using ip route to specify the encapsulation, IP header is encapsulated instead. The patch does support Ethernet to be encapsulated, though, using ETH_P_TEB in skb->protocol. This will be utilized by other COLLECT_METADATA users (openvswitch in particular). If there is ever demand for Ethernet encapsulation with VXLAN-GPE using ip route, it's easy to add a new flag switching the interface to "Ethernet mode" (called "L2 mode" in v1 of this patchset). For now, leave this out, it seems we don't need it. Disallowed more flag combinations, especially RCO with GPE. Added comment explaining that GBP and GPE cannot be set together. Signed-off-by:Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Jiri Benc authored
Allow calling of iptunnel_pull_header without special casing ETH_P_TEB inner protocol. Signed-off-by:
-
Jiri Benc authored
Handle VXLAN_F_COLLECT_METADATA before VXLAN_F_PROXY. The latter does not make sense with the former, as it needs populated fdb which does not happen in metadata mode. After this cleanup, the fdb code in vxlan_xmit is moved to a common location and can be later skipped for VXLAN-GPE which does not necessarily carry inner Ethernet header. v2: changed commit description to not reference L3 mode Signed-off-by:
-
Jiri Benc authored
This will allow to initialize vxlan in ARPHRD_NONE mode based on the passed rtnl attributes. v2: renamed "l2mode" to "ether". Signed-off-by:
-
Hariprasad Shenai authored
Message level can be set through ethtool, so deprecate module parameter which is used to set the same. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Alexander Duyck authored
With IPv4 and IPv6 now using the same format for checksums based on the length of the frame we need to update the i40e and i40evf drivers so that they correctly account for lengths greater than or equal to 64K. With this patch the driver should now correctly update checksums for frames up to 16776960 in length which should be more than large enough for all possible TSO frames in the near future. Signed-off-by:
Alexander Duyck <aduyck@mirantis.com> Tested-by:
-
Avinash Dayanand authored
Signed-off-by:
Avinash Dayanand <avinash.dayanand@intel.com> Tested-by:
-
Shannon Nelson authored
Add the Media Not Available flag to the link event mask. It seems that event comes first if you have a DA cable pulled out, but there's no follow-up event for Link Down; if you're not looking for MEDIA_NA you will get no event, even though there's now no Link. Change-ID: cb3340a2849805bb881f64f6f2ae810eef46eba7 Signed-off-by:
-
Mitch Williams authored
These conditions can happen any time VFs are enabled or disabled and are not really indicative of fatal problems unless they happen continuously. Lower the log level so that people don't get scared. Change-ID: I1ceb4adbd10d03cbeed54d1f5b7f20d60328351d Signed-off-by:
-
