- 07 Mar, 2016 36 commits
-
-
Dan Carpenter authored
commit b1d353ad upstream. "count" is controlled by the user and it can be negative. Let's prevent that by making it unsigned. You have to have CAP_SYS_RAWIO to call this function so the bug is not as serious as it could be. Fixes: 5369c02d ('intel_scu_ipc: Utility driver for intel scu ipc') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Akinobu Mita authored
commit 431386e7 upstream. According to the datasheet, the resolusion of temperature sensor is -5.35 counts/C. Temperature ADC is 472 counts at 25C. (https://www.sparkfun.com/datasheets/Sensors/Pressure/MPL115A1.pdf NOTE: This is older revision, but this information is removed from the latest datasheet from nxp somehow) Temp [C] = (Tadc - 472) / -5.35 + 25 = (Tadc - 605.750000) * -0.186915888 So the correct offset is -605.750000. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit d81dac3c upstream. In twl4030_bci_probe() there are some failure paths where we call iio_channel_release() with a NULL pointer. (Apparently, that driver can opperate without a valid channel pointer). Let's fix it by adding a NULL check in iio_channel_release(). Fixes: 2202e1fc ('drivers: power: twl4030_charger: fix link problems when building as module') Signed-off-by:
-
Wang, Rui Y authored
commit fe097861 upstream. hash_sendmsg/sendpage() need to wait for the completion of crypto_ahash_init() otherwise it can cause panic. Signed-off-by:
Rui Wang <rui.y.wang@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Mike Christie authored
commit 8a9ebe71 upstream. In a couple places we are not converting to/from the Linux block layer 512 bytes sectors. 1. The request queue values and what we do are a mismatch of things: max_discard_sectors - This is in linux block layer 512 byte sectors. We are just copying this to max_unmap_lba_count. discard_granularity - This is in bytes. We are converting it to Linux block layer 512 byte sectors. discard_alignment - This is in bytes. We are just copying this over. The problem is that the core LIO code exports these values in spc_emulate_evpd_b0 and we use them to test request arguments in sbc_execute_unmap, but we never convert to the block size we export to the initiator. If we are not using 512 byte sectors then we are exporting the wrong values or are checks are off. And, for the discard_alignment/bytes case we are just plain messed up. 2. blkdev_issue_discard's start and number of sector arguments are supposed to be in linux block layer 512 byte sectors. We are currently passing in the values we get from the initiator which might be based on some other sector size. There is a similar problem in iblock_execute_write_same where the bio functions want values in 512 byte sectors but we are passing in what we got from the initiator. Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> [ kamal: backport to 4.2-stable: no unmap_zeroes_data; context ] Signed-off-by:
-
Lev Lybin authored
commit 1b3c993a upstream. Microsoft LifeCam HD-6000 (045e:076f) requires the similar quirk for avoiding the stall due to the invalid sample rate reads. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111491Signed-off-by:
Lev Lybin <lev.lybin@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jurgen Kramer authored
commit ad678b4c upstream. This patch adds native DSD support for the PS Audio NuWave DAC. Signed-off-by:
Jurgen Kramer <gtmkramer@xs4all.nl> Signed-off-by:
-
Jurgen Kramer authored
commit 5327d6ba upstream. In my patch adding native DSD support for the Oppo HA-1, the wrong vendor ID got through. This patch fixes the vendor ID and aligns the comment. Fixes: a4eae3a5 ('ALSA: usb: Add native DSD support for Oppo HA-1') Signed-off-by:
-
Jani Nikula authored
commit 5efd4076 upstream. Per DP spec, the source device should fall back to 18 bpp, VESA range RGB when the sink capability is unknown. Fix the color depth clamping. 18 bpp color depth should ensure full color range in automatic mode. The clamping has been HDMI specific since its introduction in commit 996a2239 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 19 11:24:34 2013 +0200 drm/i915: Disable high-bpc on pre-1.4 EDID screens Reported-and-tested-by:
Dihan Wickremasuriya <nayomal@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1452695720-7076-1-git-send-email-jani.nikula@intel.com (cherry picked from commit 013dd9e0) Signed-off-by:
-
Cyrille Pitchen authored
commit 70f340df upstream. The non-DT platform that uses this driver (actually the AVR32) was taking a bad branch for determining if the IP would use gpio for CS. Adding the presence of DT as a condition fixes this issue. Fixes: 48203034 ("spi: atmel: add support for the internal chip-select of the spi controller") Reported-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
Cyrille Pitchen <cyrille.pitchen@atmel.com> [nicolas.ferre@atmel.com: extract from ml discussion] Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Dmitry Torokhov authored
commit d4f1b06d upstream. We should set device's capabilities first, and then register it, otherwise various handlers already present in the kernel will not be able to connect to the device. Reported-by:
Lauri Kasanen <cand@gmx.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Herbert Xu authored
commit 00420a65 upstream. The has_key logic is wrong for shash algorithms as they always have a setkey function. So we should instead be testing against shash_no_setkey. Fixes: a5596d63 ("crypto: hash - Add crypto_ahash_has_setkey") Reported-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
-
Nicolas Ferre authored
commit e873cc02 upstream. For phy0 KSZ8081, the type of GPIO IRQ should be "level low" instead of "edge falling". Signed-off-by:
-
Wenyou Yang authored
commit aae6b18f upstream. On SAMA5D4EK board, the Ethernet doesn't work after resuming from the suspend state. Signed-off-by:
Wenyou Yang <wenyou.yang@atmel.com> [nicolas.ferre@atmel.com: adapt to newer kernel] Fixes: 38153a01 ("ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board") Signed-off-by:
-
Mohamed Jamsheeth Hajanajubudeen authored
commit 929e883f upstream. Change instance id of DBGU to 45. Signed-off-by:
Mohamed Jamsheeth Hajanajubudeen <mohamedjamsheeth.hajanajubudeen@atmel.com> Fixes: 7c661394 ("ARM: at91: dt: add device tree file for SAMA5D4 SoC") Signed-off-by:
-
Johannes Berg authored
commit 6736fde9 upstream. The code within wait_event_interruptible() is called with !TASK_RUNNING, so mustn't call any functions that can sleep, like mutex_lock(). Since we re-check the list_empty() in a loop after the wait, it's safe to simply use list_empty() without locking. This bug has existed forever, but was only discovered now because all userspace implementations, including the default 'rfkill' tool, use poll() or select() to get a readable fd before attempting to read. Fixes: c64fb016 ("rfkill: create useful userspace interface") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sachin Kulkarni authored
commit 4fa11ec7 upstream. During a sw scan ieee80211_iface_work ignores work items for all vifs. However after the scan complete work is requeued only for STA, ADHOC and MESH iftypes. This occasionally results in event processing getting delayed/not processed for iftype AP when it coexists with a STA. This can result in data halt and eventually disconnection on the AP interface. Signed-off-by:
Sachin Kulkarni <Sachin.Kulkarni@imgtec.com> Signed-off-by:
-
Tejun Heo authored
commit 566d1827 upstream. Some early controllers incorrectly reported zero ports in PORTS_IMPL register and the ahci driver fabricates PORTS_IMPL from the number of ports in those cases. This hasn't mattered but with the new nvme controllers there are cases where zero PORTS_IMPL is valid and should be honored. Disable the workaround for >= AHCI 1.3. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/g/CALCETrU7yMvXEDhjAUShoHEhDwifJGapdw--BKxsP0jmjKGmRw@mail.gmail.com Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Adam Ford authored
commit 0ea24daa upstream. The tcxo-clock-frequency binding is listed as optional, but without it the wl12xx used on the torpedo + wireless may hang. Scanning also appears broken without this patch. Signed-off-by:
Adam Ford <aford173@gmail.com> Fixes: 687c2767 ("ARM: dts: Add minimal support for LogicPD Torpedo DM3730 devkit") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 4ae2182b upstream. A Root Port's AER structure (rpc) contains a queue of events. aer_irq() enqueues AER status information and schedules aer_isr() to dequeue and process it. When we remove a device, aer_remove() waits for the queue to be empty, then frees the rpc struct. But aer_isr() references the rpc struct after dequeueing and possibly emptying the queue, which can cause a use-after-free error as in the following scenario with two threads, aer_isr() on the left and a concurrent aer_remove() on the right: Thread A Thread B -------- -------- aer_irq(): rpc->prod_idx++ aer_remove(): wait_event(rpc->prod_idx == rpc->cons_idx) # now blocked until queue becomes empty aer_isr(): # ... rpc->cons_idx++ # unblocked because queue is now empty ... kfree(rpc) mutex_unlock(&rpc->rpc_mutex) To prevent this problem, use flush_work() to wait until the last scheduled instance of aer_isr() has completed before freeing the rpc struct in aer_remove(). I reproduced this use-after-free by flashing a device FPGA and re-enumerating the bus to find the new device. With SLUB debug, this crashes with 0x6b bytes (POISON_FREE, the use-after-free magic number) in GPR25: pcieport 0000:00:00.0: AER: Multiple Corrected error received: id=0000 Unable to handle kernel paging request for data at address 0x27ef9e3e Workqueue: events aer_isr GPR24: dd6aa000 6b6b6b6b 605f8378 605f8360 d99b12c0 604fc674 606b1704 d99b12c0 NIP [602f5328] pci_walk_bus+0xd4/0x104 [bhelgaas: changelog, stable tag] Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Larry Finger authored
commit c72fc909 upstream. Recently, it has been reported that D-Link DWA-582 cards, which use an RTL8812AE chip are not able to scan for 5G networks. The problems started with kernel 4.2, which is the first version that had commit d10101a6 ("rtlwifi: rtl8821ae: Fix problem with regulatory information"). With this patch, the driver went from setting a default channel plan to using the value derived from EEPROM. Bug reports at https://bugzilla.kernel.org/show_bug.cgi?id=111031 and https://bugzilla.redhat.com/show_bug.cgi?id=1279653 are examples of this problem. The problem was solved once I learned that the internal country code was resulting in a regulatory set with only 2.4 GHz channels. With the RTL8821AE chips available to me, the country code was such that both 2.4 and 5 GHz channels are allowed. The fix is to allow both bands even when the EEPROM is incorrectly encoded. Fixes: d10101a6 ("rtlwifi: rtl8821ae: Fix problem with regulatory information") Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: littlesmartguy@gmail.com Cc: gabe@codehaus.org Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Tony Lindgren authored
commit 4da597d1 upstream. We don't want to write to .text so let's move ppa_zero_params and ppa_por_params to .data and access them via pointers. Note that I have not been able to test as we I don't have a HS omap4 to test with. The code has been changed in similar way as for omap3 though. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Fixes: 1e6b4811 ("ARM: mm: allow non-text sections to be non-executable") Signed-off-by:
-
Tony Lindgren authored
commit 0a0b1327 upstream. We don't want to write to .text, so let's move l2_inv_api_params to .data and access it via a pointer. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by:
-
Tony Lindgren authored
commit a5311d4d upstream. We don't want to write to .text and we can move save_secure_ram_context into .data as it all gets copied into SRAM anyways. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Tero Kristo <t-kristo@ti.com> Acked-by:
-
Tony Lindgren authored
commit eeaf9646 upstream. We don't want to write to .text section. Let's move l2dis_3630 to .data and access it via a pointer. For calculating the offset, let's optimize out the add and do it in ldr/str as suggested by Nicolas Pitre <nicolas.pitre@linaro.org>. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by:
-
Tony Lindgren authored
commit d9db5910 upstream. We don't want to be writing to .text so it can be set rodata. Fix error "Unable to handle kernel paging request at virtual address c012396c" in wait_dll_lock_timed if CONFIG_DEBUG_RODATA is selected. As these counters are for debugging only and unused, we can just remove them. Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Nishanth Menon <nm@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Acked-by:
-
Tejun Heo authored
commit aa226ff4 upstream. There are three subsystem callbacks in css shutdown path - css_offline(), css_released() and css_free(). Except for css_released(), cgroup core didn't guarantee the order of invocation. css_offline() or css_free() could be called on a parent css before its children. This behavior is unexpected and led to bugs in cpu and memory controller. This patch updates offline path so that a parent css is never offlined before its children. Each css keeps online_cnt which reaches zero iff itself and all its children are offline and offline_css() is invoked only after online_cnt reaches zero. This fixes the memory controller bug and allows the fix for cpu controller. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reported-by:
Brian Christiansen <brian.o.christiansen@gmail.com> Link: http://lkml.kernel.org/g/5698A023.9070703@de.ibm.com Link: http://lkml.kernel.org/g/CAKB58ikDkzc8REt31WBkD99+hxNzjK4+FBmhkgS+NVrC9vjMSg@mail.gmail.com Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Vineet Gupta authored
commit cbfe74a7 upstream. Returning to delay slot, riding an interrupti, had one loose end. AUX_USER_SP used for restoring user mode SP upon RTIE was not being setup from orig task's saved value, causing task to use wrong SP, leading to ProtV errors. The reason being: - INTERRUPT_EPILOGUE returns to a kernel trampoline, thus not expected to restore it - EXCEPTION_EPILOGUE is not used at all Fix that by restoring AUX_USER_SP explicitly in the trampoline. This was broken in the original workaround, but the error scenarios got reduced considerably since v3.14 due to following: 1. The Linuxthreads.old based userspace at the time caused many more exceptions in delay slot than the current NPTL based one. Infact with current userspace the error doesn't happen at all. 2. Return from interrupt (delay slot or otherwise) doesn't get exercised much after commit 4de0e528 ("Really Re-enable interrupts to avoid deadlocks") since IRQ_ACTIVE.active being clear means most returns are as if from pure kernel (even for active interrupts) Infact the issue only happened in an experimental branch where I was tinkering with reverted 4de0e528 Fixes: 4255b07f ("ARCv2: STAR 9000793984: Handle return from intr to Delay Slot") Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Bard Liao authored
commit b28785fa upstream. The shift bit of IN1 boost gain control is 12. Signed-off-by:
Bard Liao <bardliao@realtek.com> Signed-off-by:
-
Jonathan Cameron authored
commit 9d0be85d upstream. Whilst this part has a hardware buffer, the identifcation that IIO cares about is the userspace facing end. It this case we push individual elements from the hardware fifo into the software interface (specifically a kfifo) rather than providing direct reads through to a hardware buffer (as we still do in the sca3000 for example). Technically the original specification as a hardware buffer could be considered wrong, but it didn't matter until the patch listed below. Result is that any attempt to enable the buffer will return -EINVAL Fixes: 225d59ad ("iio: Specify supported modes for buffers") Signed-off-by:
-
Gabriele Mazzotta authored
commit fa34e6dd upstream. As per the ACPI specification (Revision 5.0) [1], the data coming from the sensor represent the ambient light illuminance reading expressed in lux. So use IIO_CHAN_INFO_PROCESSED to signify that the data are pre-processed. However, to keep backward ABI compatibility, the IIO_CHAN_INFO_RAW bit is not removed. [1] http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf This issue has also been responsible for at least one userspace bug report hence marking what is a small semantic fix really for stable. [2] https://github.com/hadess/iio-sensor-proxy/issues/46Signed-off-by:
Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by:
-
CQ Tang authored
commit fda3bec1 upstream. This is a 32-bit register. Apparently harmless on real hardware, but causing justified warnings in simulation. Signed-off-by:
CQ Tang <cq.tang@intel.com> Signed-off-by:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
-
Yong Li authored
commit 97a249e9 upstream. Without this change, the name entity for mcp4725 is missing in /sys/bus/iio/devices/iio\:device*/name With this change, name is reported correctly Signed-off-by:
Yong Li <sdliyong@gmail.com> Signed-off-by:
-
Vegard Nossum authored
commit 005ce071 upstream. Ran into this on UML: drivers/built-in.o: In function `vf610_adc_probe': drivers/iio/adc/vf610_adc.c:744: undefined reference to `devm_ioremap_resource' devm_ioremap_resource() is defined only when HAS_IOMEM is selected. Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Vegard Nossum authored
commit 01cc5235 upstream. Ran into this on UML: drivers/iio/accel/stk8ba50.c: In function ‘stk8ba50_data_rdy_trigger_set_state’: drivers/iio/accel/stk8ba50.c:163:9: error: implicit declaration of function ‘iio_trigger_get_drvdata’ [-Werror=implicit-function-declaration] iio_trigger_get_drvdata() is defined only when IIO_TRIGGER is selected. Signed-off-by:
-
Markus Elfring authored
commit c08ae185 upstream. The return type "unsigned int" was used by the ltr501_match_samp_freq() function despite of the aspect that it will eventually return a negative error code. Improve this implementation detail by deletion of the type modifier then. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Acked-by:
-
- 04 Mar, 2016 1 commit
-
-
Andy Lutomirski authored
commit 3d44d51b upstream. This doesn't seem to fix a regression -- I don't think the CLAC was ever there. I double-checked in a debugger: entries through the int80 gate do not automatically clear AC. Stable maintainers: I can provide a backport to 4.3 and earlier if needed. This needs to be backported all the way to 3.10. Reported-by:
Brian Gerst <brgerst@gmail.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 63bcff2a ("x86, smap: Add STAC and CLAC instructions to control user space access") Link: http://lkml.kernel.org/r/b02b7e71ae54074be01fc171cbd4b72517055c0e.1456345086.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
- 02 Mar, 2016 1 commit
-
-
Haozhong Zhang authored
commit 81b1b9ca upstream. The current handling of accesses to guest MSR_TSC_AUX returns error if vcpu does not support rdtscp, though those accesses are initiated by host. This can result in the reboot failure of some versions of QEMU. This patch fixes this issue by passing those host initiated accesses for further handling instead. Signed-off-by:
Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Backported-by:
Thomas Lamprecht <t.lamprecht@proxmox.com> Signed-off-by:
-
- 25 Feb, 2016 1 commit
-
-
Thomas Hellstrom authored
commit 12617971 upstream. A regression introduced when the master ttm lock was split into two. Reported-and-tested-by:
Brian Paul <brianp@vmware.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
-
- 23 Feb, 2016 1 commit
-
-
Tejun Heo authored
commit 041bd12e upstream. This reverts commit 874bbfe6. Workqueue used to implicity guarantee that work items queued without explicit CPU specified are put on the local CPU. Recent changes in timer broke the guarantee and led to vmstat breakage which was fixed by 176bed1d ("vmstat: explicitly schedule per-cpu work on the CPU we need it to run on"). vmstat is the most likely to expose the issue and it's quite possible that there are other similar problems which are a lot more difficult to trigger. As a preventive measure, 874bbfe6 ("workqueue: make sure delayed work run in local cpu") was applied to restore the local CPU guarnatee. Unfortunately, the change exposed a bug in timer code which got fixed by 22b886dd ("timers: Use proper base migration in add_timer_on()"). Due to code restructuring, the commit couldn't be backported beyond certain point and stable kernels which only had 874bbfe6 started crashing. The local CPU guarantee was accidental more than anything else and we want to get rid of it anyway. As, with the vmstat case fixed, 874bbfe6 is causing more problems than it's fixing, it has been decided to take the chance and officially break the guarantee by reverting the commit. A debug feature will be added to force foreign CPU assignment to expose cases relying on the guarantee and fixes for the individual cases will be backported to stable as necessary. Signed-off-by:
-
