- 30 Nov, 2019 22 commits
-
-
Ilya Leoshkevich authored
unwind_for_each_frame can take at least 8 different sets of parameters. Add a test to make sure they all are handled in a sane way. Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Co-developed-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
Always inline get_stack_pointer() to avoid potential problems due to compiler inlining decisions, i.e. getting stack pointer of get_stack_pointer() itself which is later reused. Reviewed-by:
-
Niklas Schnelle authored
The config option CONFIG_PCI_NR_FUNCTIONS sets a limit on the number of PCI functions we can support. Previously on reaching this limit there was no indication why newly attached devices are not recognized by Linux which could be quite confusing. Thus this patch adds a pr_err() for this case. Reviewed-by:
Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by:
-
Niklas Schnelle authored
When UID checking was turned off during runtime in the underlying hypervisor, a PCI device may be attached with the same UID. This is already detected but happens silently. Add an error message so it can more easily be understood why a device was not added. Reviewed-by:
-
Thomas Richter authored
Each SBDT is located at a 4KB page and contains 512 entries. Each entry of a SDBT points to a SDB, a 4KB page containing sampled data. The last entry is a link to another SDBT page. When an event is created the function sequence executed is: __hw_perf_event_init() +--> allocate_buffers() +--> realloc_sampling_buffers() +---> alloc_sample_data_block() Both functions realloc_sampling_buffers() and alloc_sample_data_block() allocate pages and the allocation can fail. This is handled correctly and all allocated pages are freed and error -ENOMEM is returned to the top calling function. Finally the event is not created. Once the event has been created, the amount of initially allocated SDBT and SDB can be too low. This is detected during measurement interrupt handling, where the amount of lost samples is calculated. If the number of lost samples is too high considering sampling frequency and already allocated SBDs, the number of SDBs is enlarged during the next execution of cpumsf_pmu_enable(). If more SBDs need to be allocated, functions realloc_sampling_buffers() +---> alloc-sample_data_block() are called to allocate more pages. Page allocation may fail and the returned error is ignored. A SDBT and SDB setup already exists. However the modified SDBTs and SDBs might end up in a situation where the first entry of an SDBT does not point to an SDB, but another SDBT, basicly an SBDT without payload. This can not be handled by the interrupt handler, where an SDBT must have at least one entry pointing to an SBD. Add a check to avoid SDBTs with out payload (SDBs) when enlarging the buffer setup. Signed-off-by:Thomas Richter <tmricht@linux.ibm.com> Signed-off-by:
-
Thomas Richter authored
The macro TEAR_REG() saves the last used SDBT address in the perf_hw_event structure. This is also done by function hw_reset_registers() which is a one-liner and simply uses macro TEAR_REG(). Remove function hw_reset_registers(), which is only used one time and use macro TEAR_REG() instead. This macro is used throughout the code anyway. Signed-off-by:
-
Thomas Richter authored
In interrupt handling the function extend_sampling_buffer() is called after checking for a possibly extension. This check is not necessary as the called function itself performs this check again. Signed-off-by:
-
Thomas Richter authored
Replace hard coded function names in debug statements by the "%s ...", __func__ construct suggested by checkpatch.pl script. Use consistent debug print format of the form variable blank value. Also add leading 0x for all hex values. Print allocated page addresses consistantly as hex numbers with leading 0x. Signed-off-by:
-
Gerald Schaefer authored
The KASLR offset is added to vmcoreinfo in arch_crash_save_vmcoreinfo(), so that it can be found by crash when processing kernel dumps. However, arch_crash_save_vmcoreinfo() is called during a subsys_initcall, so if the kernel crashes before that, we have no vmcoreinfo and no KASLR offset. Fix this by storing the KASLR offset in the lowcore, where the vmcore_info pointer will be stored, and where it can be found by crash. In order to make it distinguishable from a real vmcore_info pointer, mark it as uneven (KASLR offset itself is aligned to THREAD_SIZE). When arch_crash_save_vmcoreinfo() stores the real vmcore_info pointer in the lowcore, it overwrites the KASLR offset. At that point, the KASLR offset is not yet added to vmcoreinfo, so we also need to move the mem_assign_absolute() behind the vmcoreinfo_append_str(). Fixes: b2d24b97 ("s390/kernel: add support for kernel address space layout randomization (KASLR)") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
-
Vasily Gorbik authored
Consider reaching task pt_regs graceful unwinder termination. Task pt_regs itself never contains a valid state to which a task might return within the kernel context (user task pt_regs is a special case). Since we already avoid printing user task pt_regs and in most cases we don't even bother filling task pt_regs psw and r15 with something reasonable simply skip task pt_regs altogether. With this change unwind_error() now accurately represent whether unwinder reached task pt_regs successfully or failed along the way. Reviewed-by:
-
Vasily Gorbik authored
Add missing allocation of pt_regs at the bottom of the stack. This makes it consistent with other stack setup cases and also what stack unwinder expects. Reviewed-by:
-
Vasily Gorbik authored
Currently unwinder yields 2 entries when pt_regs are met: sp="address of pt_regs itself" ip=pt_regs->psw sp=pt_regs->gprs[15] ip="r14 from stack frame pointed by pt_regs->gprs[15]" And neither of those 2 states (combination of sp and ip) ever happened. reuse_sp has been introduced by commit a1d863ac ("s390/unwind: fix mixing regs and sp"). reuse_sp=true makes unwinder keen to produce the following result, when pt_regs are given (as an arg to unwind_start): sp=pt_regs->gprs[15] ip=pt_regs->psw sp=pt_regs->gprs[15] ip="r14 from stack frame pointed by pt_regs->gprs[15]" The first state is an actual state in which a task was when pt_regs were collected. The second state is marked unreliable and is for debugging purposes to cover the case when a task has been interrupted in between stack frame allocation and writing back_chain - in this case r14 might show an actual caller. Make unwinder behaviour enabled via reuse_sp=true default and drop the special case handling. Reviewed-by:
-
Vasily Gorbik authored
If unwinder is looking at pt_regs which is not on stack then something went wrong and an error has to be reported rather than successful unwinding termination. Reviewed-by:
-
Vasily Gorbik authored
CALL_ON_STACK is intended to be used for temporary stack switching with potential return to the caller. When CALL_ON_STACK is misused to switch from nodat stack to task stack back_chain information would later lead stack unwinder from task stack into (per cpu) nodat stack which is reused for other purposes. This would yield confusing unwinding result or errors. To avoid that introduce CALL_ON_STACK_NORETURN to be used instead. It makes sure that back_chain is zeroed and unwinder finishes gracefully ending up at task pt_regs. Reviewed-by:
-
Vasily Gorbik authored
Currently CALL_ON_STACK saves r15 as back_chain in the first stack frame of the stack we about to switch to. But if a function which uses CALL_ON_STACK calls other function it allocates a stack frame for a callee. In this case r15 is pointing to a callee stack frame and not a stack frame of function itself. This results in dummy unwinding entry with random sp and ip values. Introduce and utilize current_frame_address macro to get an address of actual function stack frame. Reviewed-by:
-
Vasily Gorbik authored
Avoid mixture of task == NULL and task == current meaning the same thing and simply always initialize task with current in unwind_start. Reviewed-by:
-
Vasily Gorbik authored
Make sure preemption is disabled when temporary switching to nodat stack with CALL_ON_STACK helper, because nodat stack is per cpu. Reviewed-by:
-
Vasily Gorbik authored
disabled_wait uses _THIS_IP_ and assumes that compiler would inline it. Make sure this assumption is always correct by utilizing __always_inline. Reviewed-by:
-
Heiko Carstens authored
getcpu reads the required values for cpu and node with two instructions. This might lead to an inconsistent result if user space gets preempted and migrated to a different CPU between the two instructions. Fix this by using just a single instruction to read both values at once. This is currently rather a theoretical bug, since there is no real NUMA support available (except for NUMA emulation). Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
When a secondary CPU is brought up it must initialize its control registers. CPU A which triggers that a secondary CPU B is brought up stores its control register contents into the lowcore of new CPU B, which then loads these values on startup. This is problematic in various ways: the control register which contains the home space ASCE will correctly contain the kernel ASCE; however control registers for primary and secondary ASCEs are initialized with whatever values were present in CPU A. Typically: - the primary ASCE will contain the user process ASCE of the process that triggered onlining of CPU B. - the secondary ASCE will contain the percpu VDSO ASCE of CPU A. Due to lazy ASCE handling we may also end up with other combinations. When then CPU B switches to a different process (!= idle) it will fixup the primary ASCE. However the problem is that the (wrong) ASCE from CPU A was loaded into control register 1: as soon as an ASCE is attached (aka loaded) a CPU is free to generate TLB entries using that address space. Even though it is very unlikey that CPU B will actually generate such entries, this could result in TLB entries of the address space of the process that ran on CPU A. These entries shouldn't exist at all and could cause problems later on. Furthermore the secondary ASCE of CPU B will not be updated correctly. This means that processes may see wrong results or even crash if they access VDSO data on CPU B. The correct VDSO ASCE will eventually be loaded on return to user space as soon as the kernel executed a call to strnlen_user or an atomic futex operation on CPU B. Fix both issues by intializing the to be loaded control register contents with the correct ASCEs and also enforce (re-)loading of the ASCEs upon first context switch and return to user space. Fixes: 0aaba41b ("s390: remove all code using the access register mode") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by:
-
Harald Freudenberger authored
This patch introduces support for a new architectured reply code 0x8B indicating that a hypervisor layer (if any) has rejected an ap message. Linux may run as a guest on top of a hypervisor like zVM or KVM. So the crypto hardware seen by the ap bus may be restricted by the hypervisor for example only a subset like only clear key crypto requests may be supported. Other requests will be filtered out - rejected by the hypervisor. The new reply code 0x8B will appear in such cases and needs to get recognized by the ap bus and zcrypt device driver zoo. Signed-off-by:
Harald Freudenberger <freude@linux.ibm.com> Signed-off-by:
-
Ilya Leoshkevich authored
On s390 bpf_get_stack_raw_tp() returns 0 entries for both kernel and user stacks. While there is no practical unwinding solution for userspace on s390 at this moment, there certainly is a kernel unwinder. However, it is not properly integrated with BPF. In order to start unwinding, bpf_get_stack_raw_tp() obtains the current kernel register values using perf_fetch_caller_regs(), which is not implemented for s390. The actual unwinding then happens by passing those registers to perf_callchain_kernel(). Implement perf_arch_fetch_caller_regs() for s390, where __builtin_frame_address(0) points to back_chain. Signed-off-by:
-
- 26 Nov, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 updates from Vasily Gorbik: - Adjust PMU device drivers registration to avoid WARN_ON and few other perf improvements. - Enhance tracing in vfio-ccw. - Few stack unwinder fixes and improvements, convert get_wchan custom stack unwinding to generic api usage. - Fixes for mm helpers issues uncovered with tests validating architecture page table helpers. - Fix noexec bit handling when hardware doesn't support it. - Fix memleak and unsigned value compared with zero bugs in crypto code. Minor code simplification. - Fix crash during kdump with kasan enabled kernel. - Switch bug and alternatives from asm to asm_inline to improve inlining decisions. - Use 'depends on cc-option' for MARCH and TUNE options in Kconfig, add z13s and z14 ZR1 to TUNE descriptions. - Minor head64.S simplification. - Fix physical to logical CPU map for SMT. - Several cleanups in qdio code. - Other minor cleanups and fixes all over the code. * tag 's390-5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits) s390/cpumf: Adjust registration of s390 PMU device drivers s390/smp: fix physical to logical CPU map for SMT s390/early: move access registers setup in C code s390/head64: remove unnecessary vdso_per_cpu_data setup s390/early: move control registers setup in C code s390/kasan: support memcpy_real with TRACE_IRQFLAGS s390/crypto: Fix unsigned variable compared with zero s390/pkey: use memdup_user() to simplify code s390/pkey: fix memory leak within _copy_apqns_from_user() s390/disassembler: don't hide instruction addresses s390/cpum_sf: Assign error value to err variable s390/cpum_sf: Replace function name in debug statements s390/cpum_sf: Use consistant debug print format for sampling s390/unwind: drop unnecessary code around calling ftrace_graph_ret_addr() s390: add error handling to perf_callchain_kernel s390: always inline current_stack_pointer() s390/mm: add mm_pxd_folded() checks to pxd_free() s390/mm: properly clear _PAGE_NOEXEC bit when it is not supported s390/mm: simplify page table helpers for large entries s390/mm: make pmd/pud_bad() report large entries as bad ...
-
- 25 Nov, 2019 17 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 updates from Catalin Marinas: "Apart from the arm64-specific bits (core arch and perf, new arm64 selftests), it touches the generic cow_user_page() (reviewed by Kirill) together with a macro for x86 to preserve the existing behaviour on this architecture. Summary: - On ARMv8 CPUs without hardware updates of the access flag, avoid failing cow_user_page() on PFN mappings if the pte is old. The patches introduce an arch_faults_on_old_pte() macro, defined as false on x86. When true, cow_user_page() makes the pte young before attempting __copy_from_user_inatomic(). - Covert the synchronous exception handling paths in arch/arm64/kernel/entry.S to C. - FTRACE_WITH_REGS support for arm64. - ZONE_DMA re-introduced on arm64 to support Raspberry Pi 4 - Several kselftest cases specific to arm64, together with a MAINTAINERS update for these files (moved to the ARM64 PORT entry). - Workaround for a Neoverse-N1 erratum where the CPU may fetch stale instructions under certain conditions. - Workaround for Cortex-A57 and A72 errata where the CPU may speculatively execute an AT instruction and associate a VMID with the wrong guest page tables (corrupting the TLB). - Perf updates for arm64: additional PMU topologies on HiSilicon platforms, support for CCN-512 interconnect, AXI ID filtering in the IMX8 DDR PMU, support for the CCPI2 uncore PMU in ThunderX2. - GICv3 optimisation to avoid a heavy barrier when accessing the ICC_PMR_EL1 register. - ELF HWCAP documentation updates and clean-up. - SMC calling convention conduit code clean-up. - KASLR diagnostics printed during boot - NVIDIA Carmel CPU added to the KPTI whitelist - Some arm64 mm clean-ups: use generic free_initrd_mem(), remove stale macro, simplify calculation in __create_pgd_mapping(), typos. - Kconfig clean-ups: CMDLINE_FORCE to depend on CMDLINE, choice for endinanness to help with allmodconfig" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (93 commits) arm64: Kconfig: add a choice for endianness kselftest: arm64: fix spelling mistake "contiguos" -> "contiguous" arm64: Kconfig: make CMDLINE_FORCE depend on CMDLINE MAINTAINERS: Add arm64 selftests to the ARM64 PORT entry arm64: kaslr: Check command line before looking for a seed arm64: kaslr: Announce KASLR status on boot kselftest: arm64: fake_sigreturn_misaligned_sp kselftest: arm64: fake_sigreturn_bad_size kselftest: arm64: fake_sigreturn_duplicated_fpsimd kselftest: arm64: fake_sigreturn_missing_fpsimd kselftest: arm64: fake_sigreturn_bad_size_for_magic0 kselftest: arm64: fake_sigreturn_bad_magic kselftest: arm64: add helper get_current_context kselftest: arm64: extend test_init functionalities kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht] kselftest: arm64: mangle_pstate_invalid_daif_bits kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils kselftest: arm64: extend toplevel skeleton Makefile drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platform arm64: mm: reserve CMA and crashkernel in ZONE_DMA32 ... -
Linus Torvalds authored
Merge tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest KUnit support gtom Shuah Khan: "This adds KUnit, a lightweight unit testing and mocking framework for the Linux kernel from Brendan Higgins. KUnit is not an end-to-end testing framework. It is currently supported on UML and sub-systems can write unit tests and run them in UML env. KUnit documentation is included in this update. In addition, this Kunit update adds 3 new kunit tests: - proc sysctl test from Iurii Zaikin - the 'list' doubly linked list test from David Gow - ext4 tests for decoding extended timestamps from Iurii Zaikin In the future KUnit will be linked to Kselftest framework to provide a way to trigger KUnit tests from user-space" * tag 'linux-kselftest-5.5-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (23 commits) lib/list-test: add a test for the 'list' doubly linked list ext4: add kunit test for decoding extended timestamps Documentation: kunit: Fix verification command kunit: Fix '--build_dir' option kunit: fix failure to build without printk MAINTAINERS: add proc sysctl KUnit test to PROC SYSCTL section kernel/sysctl-test: Add null pointer test for sysctl.c:proc_dointvec() MAINTAINERS: add entry for KUnit the unit testing framework Documentation: kunit: add documentation for KUnit kunit: defconfig: add defconfigs for building KUnit tests kunit: tool: add Python wrappers for running KUnit tests kunit: test: add tests for KUnit managed resources kunit: test: add the concept of assertions kunit: test: add tests for kunit test abort kunit: test: add support for test abort objtool: add kunit_try_catch_throw to the noreturn list kunit: test: add initial tests lib: enable building KUnit in lib/ kunit: test: add the concept of expectations kunit: test: add assertion printing library ...
-
Linus Torvalds authored
Merge tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "This consists of several fixes to tests and framework. Masami Hiramatsu fixed several tests to build and run correctly on arm and other 32bit architectures" * tag 'linux-kselftest-5.5-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: sync: Fix cast warnings on arm selftests: net: Fix printf format warnings on arm selftests: net: Use size_t and ssize_t for counting file size selftests: vm: Build/Run 64bit tests only on 64bit arch selftests: proc: Make va_max 1MB kselftest: Fix NULL INSTALL_PATH for TARGETS runlist selftests: Move kselftest_module.sh into kselftest/ selftests: gen_kselftest_tar.sh: Do not clobber kselftest/ selftests: breakpoints: Fix a typo of function name selftests: Fix O= and KBUILD_OUTPUT handling for relative paths
-
git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds authored
Pull fsverity updates from Eric Biggers: "Expose the fs-verity bit through statx()" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: docs: fs-verity: mention statx() support f2fs: support STATX_ATTR_VERITY ext4: support STATX_ATTR_VERITY statx: define STATX_ATTR_VERITY docs: fs-verity: document first supported kernel version
-
git://git.kernel.org/pub/scm/fs/fscrypt/fscryptLinus Torvalds authored
Pull fscrypt updates from Eric Biggers: - Add the IV_INO_LBLK_64 encryption policy flag which modifies the encryption to be optimized for UFS inline encryption hardware. - For AES-128-CBC, use the crypto API's implementation of ESSIV (which was added in 5.4) rather than doing ESSIV manually. - A few other cleanups. * tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: f2fs: add support for IV_INO_LBLK_64 encryption policies ext4: add support for IV_INO_LBLK_64 encryption policies fscrypt: add support for IV_INO_LBLK_64 policies fscrypt: avoid data race on fscrypt_mode::logged_impl_name docs: ioctl-number: document fscrypt ioctl numbers fscrypt: zeroize fscrypt_info before freeing fscrypt: remove struct fscrypt_ctx fscrypt: invoke crypto API for ESSIV handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull AFFS updates from David Sterba: "A minor bugfix and cleanup for AFFS" * tag 'affs-for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: fix a memory leak in affs_remount affs: Replace binary semaphores with mutexes
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "User visible changes: - new block group profiles: RAID1 with 3- and 4- copies - RAID1 in btrfs has always 2 copies, now add support for 3 and 4 - this is an incompat feature (named RAID1C34) - recommended use of RAID1C3 is replacement of RAID6 profile on metadata, this brings a more reliable resiliency against 2 device loss/damage - support for new checksums - per-filesystem, set at mkfs time - fast hash (crc32c successor): xxhash, 64bit digest - strong hashes (both 256bit): sha256 (slower, FIPS), blake2b (faster) - the blake2b module goes via the crypto tree, btrfs.ko has a soft dependency - speed up lseek, don't take inode locks unnecessarily, this can speed up parallel SEEK_CUR/SEEK_SET/SEEK_END by 80% - send: - allow clone operations within the same file - limit maximum number of sent clone references to avoid slow backref walking - error message improvements: device scan prints process name and PID Core changes: - cleanups - remove unique workqueue helpers, used to provide a way to avoid deadlocks in the workqueue code, now done in a simpler way - remove lots of indirect function calls in compression code - extent IO tree code moved out of extent_io.c - cleanup backup superblock handling at mount time - transaction life cycle documentation and cleanups - locking code cleanups, annotations and documentation - add more cold, const, pure function attributes - removal of unused or redundant struct members or variables - new tree-checker sanity tests - try to detect missing INODE_ITEM, cross-reference checks of DIR_ITEM, DIR_INDEX, INODE_REF, and XATTR_* items - remove own bio scheduling code (used to avoid checksum submissions being stuck behind other IO), replaced by cgroup controller-based code to allow better control and avoid priority inversions in cases where the custom and cgroup scheduling disagreed Fixes: - avoid getting stuck during cyclic writebacks - fix trimming of ranges crossing block group boundaries - fix rename exchange on subvolumes, all involved subvolumes need to be recorded in the transaction" * tag 'for-5.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (137 commits) btrfs: drop bdev argument from submit_extent_page btrfs: remove extent_map::bdev btrfs: drop bio_set_dev where not needed btrfs: get bdev directly from fs_devices in submit_extent_page btrfs: record all roots for rename exchange on a subvol Btrfs: fix block group remaining RO forever after error during device replace btrfs: scrub: Don't check free space before marking a block group RO btrfs: change btrfs_fs_devices::rotating to bool btrfs: change btrfs_fs_devices::seeding to bool btrfs: rename btrfs_block_group_cache btrfs: block-group: Reuse the item key from caller of read_one_block_group() btrfs: block-group: Refactor btrfs_read_block_groups() btrfs: document extent buffer locking btrfs: access eb::blocking_writers according to ACCESS_ONCE policies btrfs: set blocking_writers directly, no increment or decrement btrfs: merge blocking_writers branches in btrfs_tree_read_lock btrfs: drop incompat bit for raid1c34 after last block group is gone btrfs: add incompat for raid1 with 3, 4 copies btrfs: add support for 4-copy replication (raid1c4) btrfs: add support for 3-copy replication (raid1c3) ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linuxLinus Torvalds authored
Pull MTD updates from Miquel Raynal: "MTD core: - drop inactive maintainers, update the repositories and add IRC channel - debugfs functions improvements - initialize more structure parameters - misc fixes reported by robots MTD devices: - spear_smi: Fixed Write Burst mode - new Intel IXP4xx flash probing hook Raw NAND core: - useless extra checks dropped - update the detection of the bad block markers position Raw NAND controller drivers: - Cadence: new driver - Brcmnand: support for flash-dma v0 + fixes - Denali: drop support for the legacy controller/chip DT representation - superfluous dev_err() calls removed SPI NOR core changes: - introduce 'struct spi_nor_controller_ops' - clean the Register Operations methods - use dev_dbg insted of dev_err for low level info - fix retlen handling in sst_write() - fix silent truncations in spi_nor_read and spi_nor_read_raw() - fix the clearing of QE bit on lock()/unlock() - rework the disabling of the block write protection - rework the Quad Enable methods - make sure nor->spimem and nor->controller_ops are mutually exclusive - set default Quad Enable method for ISSI flashes - add support for few flashes SPI NOR controller drivers changes: - intel-spi: - support chips without software sequencer - add support for Intel Cannon Lake and Intel Comet Lake-H flashes CFI core changes: - code cleanups related useless initializers and coding style issues - fix for a possible double free problem in cfi_cmdset_0002 - improved HyperFlash error reporting and handling in cfi_cmdset_0002 core" * tag 'mtd/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (73 commits) mtd: devices: fix mchp23k256 read and write mtd: no need to check return value of debugfs_create functions mtd: spi-nor: Set default Quad Enable method for ISSI flashes mtd: spi-nor: Add support for is25wp256 mtd: spi-nor: Add support for w25q256jw mtd: spi-nor: Move condition to avoid a NULL check mtd: spi-nor: Make sure nor->spimem and nor->controller_ops are mutually exclusive mtd: spi-nor: Rename Quad Enable methods mtd: spi-nor: Merge spansion Quad Enable methods mtd: spi-nor: Rename CR_QUAD_EN_SPAN to SR2_QUAD_EN_BIT1 mtd: spi-nor: Extend the SR Read Back test mtd: spi-nor: Rework the disabling of block write protection mtd: spi-nor: Fix clearing of QE bit on lock()/unlock() mtd: cfi_cmdset_0002: fix delayed error detection on HyperFlash mtd: cfi_cmdset_0002: only check errors when ready in cfi_check_err_status() mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup() mtd: cfi_cmdset_*: kill useless 'ret' variable initializers mtd: cfi_util: use DIV_ROUND_UP() in cfi_udelay() mtd: spi-nor: Print debug message when the read back test fails mtd: spi-nor: Check all the bits written, not just the BP ones ... -
Linus Torvalds authored
Merge tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Fix DM core to disallow stacking request-based DM on partitions. - Fix DM raid target to properly resync raidset even if bitmap needed additional pages. - Fix DM crypt performance regression due to use of WQ_HIGHPRI for the IO and crypt workqueues. - Fix DM integrity metadata layout that was aligned on 128K boundary rather than the intended 4K boundary (removes 124K of wasted space for each metadata block). - Improve the DM thin, cache and clone targets to use spin_lock_irq rather than spin_lock_irqsave where possible. - Fix DM thin single thread performance that was lost due to needless workqueue wakeups. - Fix DM zoned target performance that was lost due to excessive backing device checks. - Add ability to trigger write failure with the DM dust test target. - Fix whitespace indentation in drivers/md/Kconfig. - Various smalls fixes and cleanups (e.g. use struct_size, fix uninitialized variable, variable renames, etc). * tag 'for-5.5/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (22 commits) Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues" dm: Fix Kconfig indentation dm thin: wakeup worker only when deferred bios exist dm integrity: fix excessive alignment of metadata runs dm raid: Remove unnecessary negation of a shift in raid10_format_to_md_layout dm zoned: reduce overhead of backing device checks dm dust: add limited write failure mode dm dust: change ret to r in dust_map_read and dust_map dm dust: change result vars to r dm cache: replace spin_lock_irqsave with spin_lock_irq dm bio prison: replace spin_lock_irqsave with spin_lock_irq dm thin: replace spin_lock_irqsave with spin_lock_irq dm clone: add bucket_lock_irq/bucket_unlock_irq helpers dm clone: replace spin_lock_irqsave with spin_lock_irq dm writecache: handle REQ_FUA dm writecache: fix uninitialized variable warning dm stripe: use struct_size() in kmalloc() dm raid: streamline rs_get_progress() and its raid_status() caller side dm raid: simplify rs_setup_recovery call chain dm raid: to ensure resynchronization, perform raid set grow in preresume ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull disk revalidation updates from Jens Axboe: "This continues the work that Jan Kara started to thoroughly cleanup and consolidate how we handle rescans and revalidations" * tag 'for-5.5/disk-revalidate-20191122' of git://git.kernel.dk/linux-block: block: move clearing bd_invalidated into check_disk_size_change block: remove (__)blkdev_reread_part as an exported API block: fix bdev_disk_changed for non-partitioned devices block: move rescan_partitions to fs/block_dev.c block: merge invalidate_partitions into rescan_partitions block: refactor rescan_partitions
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull zoned block device update from Jens Axboe: "Enhancements and improvements to the zoned device support" * tag 'for-5.5/zoned-20191122' of git://git.kernel.dk/linux-block: scsi: sd_zbc: Remove set but not used variable 'buflen' block: rework zone reporting scsi: sd_zbc: Cleanup sd_zbc_alloc_report_buffer() null_blk: Add zone_nr_conv to features null_blk: clean up report zones null_blk: clean up the block device operations block: Remove partition support for zoned block devices block: Simplify report zones execution block: cleanup the !zoned case in blk_revalidate_disk_zones block: Enhance blk_revalidate_disk_zones()
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull additional block driver updates from Jens Axboe: "Here's another block driver update, done to avoid conflicts with the zoned changes coming next. This contains: - Prepare SCSI sd for zone open/close/finish support - Small NVMe pull request - hwmon support (Akinobu) - add new co-maintainer (Christoph) - work-around for a discard issue on non-conformant drives (Eduard) - Small nbd leak fix" * tag 'for-5.5/drivers-post-20191122' of git://git.kernel.dk/linux-block: nbd: prevent memory leak nvme: hwmon: add quirk to avoid changing temperature threshold nvme: hwmon: provide temperature min and max values for each sensor nvmet: add another maintainer nvme: Discard workaround for non-conformant devices nvme: Add hardware monitoring support scsi: sd_zbc: add zone open, close, and finish support -
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block driver updates from Jens Axboe: "Here are the main block driver updates for 5.5. Nothing major in here, mostly just fixes. This contains: - a set of bcache changes via Coly - MD changes from Song - loop unmap write-zeroes fix (Darrick) - spelling fixes (Geert) - zoned additions cleanups to null_blk/dm (Ajay) - allow null_blk online submit queue changes (Bart) - NVMe changes via Keith, nothing major here either" * tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits) Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()" drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET bcache: don't export symbols bcache: remove the extra cflags for request.o bcache: at least try to shrink 1 node in bch_mca_scan() bcache: add idle_max_writeback_rate sysfs interface bcache: add code comments in bch_btree_leaf_dirty() bcache: fix deadlock in bcache_allocator bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front() bcache: deleted code comments for dead code in bch_data_insert_keys() bcache: add more accurate error messages in read_super() bcache: fix static checker warning in bcache_device_free() bcache: fix a lost wake-up problem caused by mca_cannibalize_lock bcache: fix fifo index swapping condition in journal_pin_cmp() md/raid10: prevent access of uninitialized resync_pages offset md: avoid invalid memory access for array sb->dev_roles md/raid1: avoid soft lockup under high load null_blk: add zone open, close, and finish support dm: add zone open, close and finish support ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull core block updates from Jens Axboe: "Due to more granular branches, this one is small and will be followed with other core branches that add specific features. I meant to just have a core and drivers branch, but external dependencies we ended up adding a few more that are also core. The changes are: - Fixes and improvements for the zoned device support (Ajay, Damien) - sed-opal table writing and datastore UID (Revanth) - blk-cgroup (and bfq) blk-cgroup stat fixes (Tejun) - Improvements to the block stats tracking (Pavel) - Fix for overruning sysfs buffer for large number of CPUs (Ming) - Optimization for small IO (Ming, Christoph) - Fix typo in RWH lifetime hint (Eugene) - Dead code removal and documentation (Bart) - Reduction in memory usage for queue and tag set (Bart) - Kerneldoc header documentation (André) - Device/partition revalidation fixes (Jan) - Stats tracking for flush requests (Konstantin) - Various other little fixes here and there (et al)" * tag 'for-5.5/block-20191121' of git://git.kernel.dk/linux-block: (48 commits) Revert "block: split bio if the only bvec's length is > SZ_4K" block: add iostat counters for flush requests block,bfq: Skip tracing hooks if possible block: sed-opal: Introduce SUM_SET_LIST parameter and append it using 'add_token_u64' blk-cgroup: cgroup_rstat_updated() shouldn't be called on cgroup1 block: Don't disable interrupts in trigger_softirq() sbitmap: Delete sbitmap_any_bit_clear() blk-mq: Delete blk_mq_has_free_tags() and blk_mq_can_queue() block: split bio if the only bvec's length is > SZ_4K block: still try to split bio if the bvec crosses pages blk-cgroup: separate out blkg_rwstat under CONFIG_BLK_CGROUP_RWSTAT blk-cgroup: reimplement basic IO stats using cgroup rstat blk-cgroup: remove now unused blkg_print_stat_{bytes|ios}_recursive() blk-throtl: stop using blkg->stat_bytes and ->stat_ios bfq-iosched: stop using blkg->stat_bytes and ->stat_ios bfq-iosched: relocate bfqg_*rwstat*() helpers block: add zone open, close and finish ioctl support block: add zone open, close and finish operations block: Simplify REQ_OP_ZONE_RESET_ALL handling block: Remove REQ_OP_ZONE_RESET plugging ...
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull libata updates from Jens Axboe: "Just a few fixes all over the place, support for the Annapurna SATA controller, and a patchset that cleans up the error defines and ultimately fixes anissue with sata_mv" * tag 'for-5.5/libata-20191121' of git://git.kernel.dk/linux-block: ata: pata_artop: make arrays static const, makes object smaller ata_piix: remove open-coded dmi_match(DMI_OEM_STRING) ata: sata_mv, avoid trigerrable BUG_ON ata: make qc_prep return ata_completion_errors ata: define AC_ERR_OK ata: Documentation, fix function names libata: Ensure ata_port probe has completed before detach ahci: tegra: use regulator_bulk_set_supply_names() ahci: Add support for Amazon's Annapurna Labs SATA controller
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring updates from Jens Axboe: "A lot of stuff has been going on this cycle, with improving the support for networked IO (and hence unbounded request completion times) being one of the major themes. There's been a set of fixes done this week, I'll send those out as well once we're certain we're fully happy with them. This contains: - Unification of the "normal" submit path and the SQPOLL path (Pavel) - Support for sparse (and bigger) file sets, and updating of those file sets without needing to unregister/register again. - Independently sized CQ ring, instead of just making it always 2x the SQ ring size. This makes it more flexible for networked applications. - Support for overflowed CQ ring, never dropping events but providing backpressure on submits. - Add support for absolute timeouts, not just relative ones. - Support for generic cancellations. This divorces io_uring from workqueues as well, which additionally gets us one step closer to generic async system call support. - With cancellations, we can support grabbing the process file table as well, just like we do mm context. This allows support for system calls that create file descriptors, like accept4() support that's built on top of that. - Support for io_uring tracing (Dmitrii) - Support for linked timeouts. These abort an operation if it isn't completed by the time noted in the linke timeout. - Speedup tracking of poll requests - Various cleanups making the coder easier to follow (Jackie, Pavel, Bob, YueHaibing, me) - Update MAINTAINERS with new io_uring list" * tag 'for-5.5/io_uring-20191121' of git://git.kernel.dk/linux-block: (64 commits) io_uring: make POLL_ADD/POLL_REMOVE scale better io-wq: remove now redundant struct io_wq_nulls_list io_uring: Fix getting file for non-fd opcodes io_uring: introduce req_need_defer() io_uring: clean up io_uring_cancel_files() io-wq: ensure free/busy list browsing see all items io-wq: ensure we have a stable view of ->cur_work for cancellations io_wq: add get/put_work handlers to io_wq_create() io_uring: check for validity of ->rings in teardown io_uring: fix potential deadlock in io_poll_wake() io_uring: use correct "is IO worker" helper io_uring: fix -ENOENT issue with linked timer with short timeout io_uring: don't do flush cancel under inflight_lock io_uring: flag SQPOLL busy condition to userspace io_uring: make ASYNC_CANCEL work with poll and timeout io_uring: provide fallback request for OOM situations io_uring: convert accept4() -ERESTARTSYS into -EINTR io_uring: fix error clear of ->file_table in io_sqe_files_register() io_uring: separate the io_free_req and io_free_req_find_next interface io_uring: keep io_put_req only responsible for release and put req ... -
git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds authored
Pull tpmd updates from Jarkko Sakkinen: - support for Cr50 fTPM - support for fTPM on AMD Zen+ CPUs - TPM 2.0 trusted keys code relocated from drivers/char/tpm to security/keys * tag 'tpmdd-next-20191112' of git://git.infradead.org/users/jjs/linux-tpmdd: KEYS: trusted: Remove set but not used variable 'keyhndl' tpm: Switch to platform_get_irq_optional() tpm_crb: fix fTPM on AMD Zen+ CPUs KEYS: trusted: Move TPM2 trusted keys code KEYS: trusted: Create trusted keys subsystem KEYS: Use common tpm_buf for trusted and asymmetric keys tpm: Move tpm_buf code to include/linux/ tpm: use GFP_KERNEL instead of GFP_HIGHMEM for tpm_buf tpm: add check after commands attribs tab allocation tpm: tpm_tis_spi: Drop THIS_MODULE usage from driver struct tpm: tpm_tis_spi: Cleanup includes tpm: tpm_tis_spi: Support cr50 devices tpm: tpm_tis_spi: Introduce a flow control callback tpm: Add a flag to indicate TPM power is managed by firmware dt-bindings: tpm: document properties for cr50 tpm_tis: override durations for STM tpm with firmware 1.2.8.28 tpm: provide a way to override the chip returned durations tpm: Remove duplicate code from caps_show() in tpm-sysfs.c
-
