- 22 Mar, 2018 17 commits
-
-
Prarit Bhargava authored
[ Upstream commit fda78d7a ] The pci_bus_type .shutdown method, pci_device_shutdown(), is called from device_shutdown() in the kernel restart and shutdown paths. Previously, pci_device_shutdown() called pci_msi_shutdown() and pci_msix_shutdown(). This disables MSI and MSI-X, which causes the device to fall back to raising interrupts via INTx. But the driver is still bound to the device, it doesn't know about this change, and it likely doesn't have an INTx handler, so these INTx interrupts cause "nobody cared" warnings like this: irq 16: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.2-1.el7_UNSUPPORTED.x86_64 #1 Hardware name: Hewlett-Packard HP Z820 Workstation/158B, BIOS J63 v03.90 06/ ... The MSI disabling code was added by d52877c7 ("pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2") because a driver left MSI enabled and kdump failed because the kexeced kernel wasn't prepared to receive the MSI interrupts. Subsequent commits 1851617c ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") and e80e7edc ("PCI/MSI: Initialize MSI capability for all architectures") changed the kexeced kernel to disable all MSIs itself so it no longer depends on the crashed kernel to clean up after itself. Stop disabling MSI/MSI-X in pci_device_shutdown(). This resolves the "nobody cared" unhandled IRQ issue above. It also allows PCI serial devices, which may rely on the MSI interrupts, to continue outputting messages during reboot/shutdown. [bhelgaas: changelog, drop pci_msi_shutdown() and pci_msix_shutdown() calls altogether] Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=187351Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: David Arcari <darcari@redhat.com> CC: Myron Stowe <mstowe@redhat.com> CC: Lukas Wunner <lukas@wunner.de> CC: Keith Busch <keith.busch@intel.com> CC: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chen-Yu Tsai authored
[ Upstream commit 4c7f16d1 ] The TCON driver calls sun4i_tcon_init_regmap and sun4i_tcon_init_clocks in its bind function. The former creates a regmap and writes to several register to clear its configuration to a known default. The latter initializes various clocks. This includes enabling the bus clock for register access and creating the dotclock. In order for the first step's writes to work, the bus clock must be enabled which is done in the second step. but the dotclock's ops use the regmap created in the first step. Rearrange the function calls such that the clocks are initialized before the regmap, and split out the dot clock creation to after the regmap is initialized. Fixes: 9026e0d1 ("drm: Add Allwinner A10 Display Engine support") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
[ Upstream commit c73f8c00 ] Doing a channel switch via hostapd_cli seems to update the new channel context for each VAP's appropriately as below in 'ath10k_mac_update_vif_chan', hence we can safely suppress the warning that shows up during this operation and dump the warning only if no vaps are available for channel switch hostapd_cli -i wlan0 chan_switch 5 5200 OK ath10k_pci : mac chanctx switch n_vifs 3 mode 1 ath10k_pci : mac chanctx switch vdev_id 2 freq 5180->5200 width 0->0 ath10k_pci : mac chanctx switch vdev_id 1 freq 5180->5200 width 0->0 ath10k_pci : mac chanctx switch vdev_id 0 freq 5180->5200 width 0->0 Call Trace: WARNING: backports-20161201-3.14.77-9ab3068/drivers/net/wireless/ath/ath10k/mac.c:7126 [<c022f2d4>] (warn_slowpath_null) from [<bf7f150c>] (ath10k_reconfig_complete+0xe4/0x25c [ath10k_core]) [<bf7f150c>] (ath10k_reconfig_complete [ath10k_core]) [<bf7f35f0>] (ath10k_mac_vif_ap_csa_work+0x214/0x370 [ath10k_core]) [<bf7f38b8>] (ath10k_mac_op_change_chanctx+0x108/0x128 [ath10k_core]) [<bf782ac0>] (ieee80211_recalc_chanctx_min_def+0x30c/0x430 [mac80211]) [<bf7830a4>] (ieee80211_recalc_smps_chanctx+0x2ec/0x840 [mac80211]) [<bf7843e8>] (ieee80211_vif_use_reserved_context+0x7c/0xf8 [mac80211]) [<bf7843e8>] (ieee80211_vif_use_reserved_context [mac80211]) [<bf76e5d4>] (ieee80211_csa_finalize_work+0x5c/0x88 [mac80211]) Fixes: d7bf4b4a ("ath10k: fix ar->rx_channel updating logic") Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit 75448607 ] The way drm_of_find_possible_crtcs works is it tries to match the remote-endpoint of the given node's various endpoints to all the crtc's .port field. Thus we need to set drm_crtc.port to the output port node of the underlying TCON. Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit 9d56defb ] The master bind function calls numerous drm functions which initialize underlying structures. It also tries to bind the various components of the display pipeline, some of which may add additional drm objects. This patch adds proper cleanup functions in the error path of the master bind function. This requires the patch "drm/sun4i: Move drm_mode_config_cleanup call to main driver", which splits out drm_mode_config_cleanup from sun4i_framebuffer_free so we can call it separately. Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 57a4fd42 ] The Cortex-A57 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: 1561f207 ("arm64: dts: r8a7796: Add Renesas R8A7796 SoC support") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 65d0b7ed ] The Cortex-A7 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: 34ea4b4a ("ARM: dts: r8a7794: Fix W=1 dtc warnings") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit beffa887 ] The Cortex-A15 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: ad53f5f0 ("ARM: dts: r8a7793: Fix W=1 dtc warnings") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit a0504f08 ] The Cortex-A15 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: 7c4163aa ("ARM: dts: r8a7792: initial SoC device tree") Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 5d6a2165 ] The Cortex-A15 cache controller is an integrated controller, and thus the device node representing it should not have a unit-addresses or reg property. Fixes: 6f9314ce ("ARM: dts: r8a7791: Fix W=1 dtc warnings") Signed-off-by:
-
Gabriel Krisman Bertazi authored
[ Upstream commit 86107838 ] If fbdev emulation is disabled, the QXL shutdown path will try to clean a framebuffer that wasn't initialized, hitting the Oops below. The problem is that even when FBDEV_EMULATION is disabled we allocate the qfbdev strutucture, but we don't initialize it. The fix is to stop allocating the memory, since it won't be used. This allows the existing verification in the cleanup hook to do it's job preventing the oops. Now that we don't allocate the unused fbdev structure, we need to be careful when dereferencing it in the PM suspend hook. [ 24.284684] BUG: unable to handle kernel NULL pointer dereference at 00000000000002e0 [ 24.285627] IP: mutex_lock+0x18/0x30 [ 24.286049] PGD 78cdf067 [ 24.286050] PUD 7940f067 [ 24.286344] PMD 0 [ 24.286649] [ 24.287072] Oops: 0002 [#1] SMP [ 24.287422] Modules linked in: qxl [ 24.287806] CPU: 0 PID: 2328 Comm: bash Not tainted 4.10.0-rc5+ #97 [ 24.288515] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 24.289681] task: ffff88007c4c0000 task.stack: ffffc90001b58000 [ 24.290354] RIP: 0010:mutex_lock+0x18/0x30 [ 24.290812] RSP: 0018:ffffc90001b5bcb0 EFLAGS: 00010246 [ 24.291401] RAX: 0000000000000000 RBX: 00000000000002e0 RCX: 0000000000000000 [ 24.292209] RDX: ffff88007c4c0000 RSI: 0000000000000001 RDI: 00000000000002e0 [ 24.292987] RBP: ffffc90001b5bcb8 R08: fffffffffffffffe R09: 0000000000000001 [ 24.293797] R10: ffff880078d80b80 R11: 0000000000011400 R12: 0000000000000000 [ 24.294601] R13: 00000000000002e0 R14: ffffffffa0009c28 R15: 0000000000000060 [ 24.295439] FS: 00007f30e3acbb40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 24.296364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.296997] CR2: 00000000000002e0 CR3: 0000000078c7b000 CR4: 00000000000006f0 [ 24.297813] Call Trace: [ 24.298097] drm_framebuffer_cleanup+0x1f/0x70 [ 24.298612] qxl_fbdev_fini+0x68/0x90 [qxl] [ 24.299074] qxl_modeset_fini+0xd/0x30 [qxl] [ 24.299562] qxl_pci_remove+0x22/0x50 [qxl] [ 24.300025] pci_device_remove+0x34/0xb0 [ 24.300507] device_release_driver_internal+0x150/0x200 [ 24.301082] device_release_driver+0xd/0x10 [ 24.301587] unbind_store+0x108/0x150 [ 24.301993] drv_attr_store+0x20/0x30 [ 24.302402] sysfs_kf_write+0x32/0x40 [ 24.302827] kernfs_fop_write+0x108/0x190 [ 24.303269] __vfs_write+0x23/0x120 [ 24.303678] ? security_file_permission+0x36/0xb0 [ 24.304193] ? rw_verify_area+0x49/0xb0 [ 24.304636] vfs_write+0xb0/0x190 [ 24.305004] SyS_write+0x41/0xa0 [ 24.305362] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 24.305887] RIP: 0033:0x7f30e31d9620 [ 24.306285] RSP: 002b:00007ffc54b47e68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 24.307128] RAX: ffffffffffffffda RBX: 00007f30e3497600 RCX: 00007f30e31d9620 [ 24.307928] RDX: 000000000000000d RSI: 0000000000da2008 RDI: 0000000000000001 [ 24.308727] RBP: 000000000070bc60 R08: 00007f30e3498760 R09: 00007f30e3acbb40 [ 24.309504] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000001 [ 24.310295] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc54b47f34 [ 24.311095] Code: 0e 01 e9 7b fe ff ff 66 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 89 fb e8 83 e8 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <3e> 48 0f b1 13 48 85 c0 74 08 48 89 df e8 66 fd ff ff 5b 5d c3 [ 24.313182] RIP: mutex_lock+0x18/0x30 RSP: ffffc90001b5bcb0 [ 24.313811] CR2: 00000000000002e0 [ 24.314208] ---[ end trace 29669c1593cae14b ]--- Signed-off-by:
Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170227203330.18542-1-krisman@collabora.co.ukSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Valtteri Heikkilä authored
[ Upstream commit 3f375270 ] This patch fixes an issue in drivers/hid/hid-input.c where USB HID control null state flag is not checked upon rejecting inputs outside logical minimum-maximum range. The check should be made according to USB HID specification 1.11, section 6.2.2.5, p.31. The fix will resolve issues with some game controllers, such as: https://bugzilla.kernel.org/show_bug.cgi?id=68621 [tk@the-tk.com: shortened and fixed spelling in commit message] Signed-off-by:
Valtteri Heikkilä <rnd@nic.fi> Signed-off-by:
Tomasz Kramkowski <tk@the-tk.com> Acked-By:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 6cc0c259 ] Add a sanity check that wid.val has been allocated, fixes a null pointer deference on stamac when calling ether_add_copy. Detected by CoverityScan, CID#1369537 ("Dereference null return value") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Varsha Rao authored
[ Upstream commit d351c2db ] BUG_ON() is replaced with WARN_ON() and EINVAL is returned, when WARN_ON() is true. This fixes the following checkpatch issue: Avoid crashing the kernel - try using WARN_ON & recovery code rather than BUG() or BUG_ON(). Signed-off-by:
Varsha Rao <rvarsha016@gmail.com> Reviewed-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit 02d492e5 ] When using perf stat on an AMD F15h system with the default hw events attributes, some of the events don't get counted: Performance counter stats for 'sleep 1': 0.749208 task-clock (msec) # 0.001 CPUs utilized 1 context-switches # 0.001 M/sec 0 cpu-migrations # 0.000 K/sec 54 page-faults # 0.072 M/sec 1,122,815 cycles # 1.499 GHz 286,740 stalled-cycles-frontend # 25.54% frontend cycles idle <not counted> stalled-cycles-backend (0.00%) ^^^^^^^^^^^^ <not counted> instructions (0.00%) ^^^^^^^^^^^^ <not counted> branches (0.00%) <not counted> branch-misses (0.00%) 1.001550070 seconds time elapsed The reason is that we have the HW watchdog consuming one PMU counter and when perf tries to schedule 6 events on 6 counters and some of those counters are constrained to only a specific subset of PMCs by the hardware, the event scheduling fails. So issue a hint to disable the HW watchdog around a perf stat session. Committer note: Testing it... # perf stat -d usleep 1 Performance counter stats for 'usleep 1': 1.180203 task-clock (msec) # 0.490 CPUs utilized 1 context-switches # 0.847 K/sec 0 cpu-migrations # 0.000 K/sec 54 page-faults # 0.046 M/sec 184,754 cycles # 0.157 GHz 714,553 instructions # 3.87 insn per cycle 154,661 branches # 131.046 M/sec 7,247 branch-misses # 4.69% of all branches 219,984 L1-dcache-loads # 186.395 M/sec 17,600 L1-dcache-load-misses # 8.00% of all L1-dcache hits (90.16%) <not counted> LLC-loads (0.00%) <not counted> LLC-load-misses (0.00%) 0.002406823 seconds time elapsed Some events weren't counted. Try disabling the NMI watchdog: echo 0 > /proc/sys/kernel/nmi_watchdog perf stat ... echo 1 > /proc/sys/kernel/nmi_watchdog # Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Ingo Molnar <mingo@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <rric@kernel.org> Cc: Vince Weaver <vince@deater.net> Link: http://lkml.kernel.org/r/20170211183218.ijnvb5f7ciyuunx4@pd.tnicSigned-off-by:
-
H. Nikolaus Schaller authored
[ Upstream commit 934df231 ] 1. check if chip is really present and don't succeed if it isn't. 2. if it succeeds, power down the chip until accessed Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hou Tao authored
commit 9b54d816 upstream. If blkg_create fails, new_blkg passed as an argument will be freed by blkg_create, so there is no need to free it again. Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
- 18 Mar, 2018 23 commits
-
-
Greg Kroah-Hartman authored
-
Koen Vandeputte authored
commit fc110ebd upstream. The subordinate value indicates the highest bus number which can be reached downstream though a certain device. Commit a20c7f36 ("PCI: Do not allocate more buses than available in parent") ensures that downstream devices cannot assign busnumbers higher than the upstream device subordinate number, which was indeed illogical. By default, dw_pcie_setup_rc() inits the Root Complex subordinate to a value of 0x01. Due to this combined with above commit, enumeration stops digging deeper downstream as soon as bus num 0x01 has been assigned, which is always the case for a bridge device. This results in all devices behind a bridge bus remaining undetected, as these would be connected to bus 0x02 or higher. Fix this by initializing the RC to a subordinate value of 0xff, which is not altering hardware behaviour in any way, but informs probing function pci_scan_bridge() later on which reads this value back from register. The following nasty errors during boot are also fixed by this: pci_bus 0000:02: busn_res: can not insert [bus 02-ff] under [bus 01] (conflicts with (null) [bus 01]) ... pci_bus 0000:03: [bus 03] partially hidden behind bridge 0000:01 [bus 01] ... pci_bus 0000:04: [bus 04] partially hidden behind bridge 0000:01 [bus 01] ... pci_bus 0000:05: [bus 05] partially hidden behind bridge 0000:01 [bus 01] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05 pci_bus 0000:02: busn_res: can not insert [bus 02-05] under [bus 01] (conflicts with (null) [bus 01]) pci_bus 0000:02: [bus 02-05] partially hidden behind bridge 0000:01 [bus 01] Fixes: a20c7f36 ("PCI: Do not allocate more buses than available in parent") Tested-by:
Niklas Cassel <niklas.cassel@axis.com> Tested-by:
Fabio Estevam <fabio.estevam@nxp.com> Tested-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by:
Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Lucas Stach <l.stach@pengutronix.de> Cc: stable@vger.kernel.org # v4.15+ Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jianguo Sun <sunjianguo1@huawei.com> Cc: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Minghuan Lian <minghuan.Lian@freescale.com> Cc: Mingkai Hu <mingkai.hu@freescale.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Roy Zang <tie-fei.zang@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> [fabio: adapted to the file location of 4.9 kernel] Signed-off-by:
-
Greentime Hu authored
commit 1f66dd36 upstream. It will get the wrong virtual address because port->mapbase is not added the correct reg-offset yet. We have to update it before earlycon_map() is called Signed-off-by:
Greentime Hu <greentime@andestech.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: stable@vger.kernel.org Fixes: 088da2a1 ("of: earlycon: Initialize port fields from DT properties") Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 71456906 upstream. This is a followup on 44117a1d ("serial: core: mark port as initialized after successful IRQ change"). Nikola has been using autoconfig via setserial and reported a crash similar to what I fixed in the earlier mentioned commit. Here I do the same fixup for the autoconfig. I wasn't sure that this is the right approach. Nikola confirmed that it fixes his crash. Fixes: b3b57646 ("tty: serial_core: convert uart_open to use tty_port_open") Link: http://lkml.kernel.org/r/20180131072000.GD1853@localhost.localdomainReported-by:
Nikola Ciprich <nikola.ciprich@linuxbox.cz> Tested-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Nikola Ciprich authored
commit 9f2068f3 upstream. Add PCI ids for two variants of Brainboxes UC-260 quad port PCI serial cards. Suggested-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Xinyong authored
commit 1a087f03 upstream. When I debug a kernel crash issue in funcitonfs, found ffs_data.ref overflowed, While functionfs is unmounting, ffs_data is put twice. Commit 43938613 ("drivers, usb: convert ffs_data.ref from atomic_t to refcount_t") can avoid refcount overflow, but that is risk some situations. So no need put ffs data in ffs_fs_kill_sb, already put in ffs_data_closed. The issue can be reproduced in Mediatek mt6763 SoC, ffs for ADB device. KASAN enabled configuration reports use-after-free errro. BUG: KASAN: use-after-free in refcount_dec_and_test+0x14/0xe0 at addr ffffffc0579386a0 Read of size 4 by task umount/4650 ==================================================== BUG kmalloc-512 (Tainted: P W O ): kasan: bad access detected ----------------------------------------------------------------------------- INFO: Allocated in ffs_fs_mount+0x194/0x844 age=22856 cpu=2 pid=566 alloc_debug_processing+0x1ac/0x1e8 ___slab_alloc.constprop.63+0x640/0x648 __slab_alloc.isra.57.constprop.62+0x24/0x34 kmem_cache_alloc_trace+0x1a8/0x2bc ffs_fs_mount+0x194/0x844 mount_fs+0x6c/0x1d0 vfs_kern_mount+0x50/0x1b4 do_mount+0x258/0x1034 INFO: Freed in ffs_data_put+0x25c/0x320 age=0 cpu=3 pid=4650 free_debug_processing+0x22c/0x434 __slab_free+0x2d8/0x3a0 kfree+0x254/0x264 ffs_data_put+0x25c/0x320 ffs_data_closed+0x124/0x15c ffs_fs_kill_sb+0xb8/0x110 deactivate_locked_super+0x6c/0x98 deactivate_super+0xb0/0xbc INFO: Object 0xffffffc057938600 @offset=1536 fp=0x (null) ...... Call trace: [<ffffff900808cf5c>] dump_backtrace+0x0/0x250 [<ffffff900808d3a0>] show_stack+0x14/0x1c [<ffffff90084a8c04>] dump_stack+0xa0/0xc8 [<ffffff900826c2b4>] print_trailer+0x158/0x260 [<ffffff900826d9d8>] object_err+0x3c/0x40 [<ffffff90082745f0>] kasan_report_error+0x2a8/0x754 [<ffffff9008274f84>] kasan_report+0x5c/0x60 [<ffffff9008273208>] __asan_load4+0x70/0x88 [<ffffff90084cd81c>] refcount_dec_and_test+0x14/0xe0 [<ffffff9008d98f9c>] ffs_data_put+0x80/0x320 [<ffffff9008d9d904>] ffs_fs_kill_sb+0xc8/0x110 [<ffffff90082852a0>] deactivate_locked_super+0x6c/0x98 [<ffffff900828537c>] deactivate_super+0xb0/0xbc [<ffffff90082af0c0>] cleanup_mnt+0x64/0xec [<ffffff90082af1b0>] __cleanup_mnt+0x10/0x18 [<ffffff90080d9e68>] task_work_run+0xcc/0x124 [<ffffff900808c8c0>] do_notify_resume+0x60/0x70 [<ffffff90080866e4>] work_pending+0x10/0x14 Cc: stable@vger.kernel.org Signed-off-by:
Xinyong <xinyong.fang@linux.alibaba.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Pete Zaitcev authored
commit a5f59683 upstream. This change fixes buffer overflows and silent data corruption with the usbmon device driver text file read operations. Signed-off-by:
Fredrik Noring <noring@nocrew.org> Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Danilo Krummrich authored
commit cb88a058 upstream. Corsair Strafe RGB keyboard does not respond to usb control messages sometimes and hence generates timeouts. Commit de3af5bf ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") tried to fix those timeouts by adding USB_QUIRK_DELAY_INIT. Unfortunately, even with this quirk timeouts of usb_control_msg() can still be seen, but with a lower frequency (approx. 1 out of 15): [ 29.103520] usb 1-8: string descriptor 0 read error: -110 [ 34.363097] usb 1-8: can't set config #1, error -110 Adding further delays to different locations where usb control messages are issued just moves the timeouts to other locations, e.g.: [ 35.400533] usbhid 1-8:1.0: can't add hid device: -110 [ 35.401014] usbhid: probe of 1-8:1.0 failed with error -110 The only way to reliably avoid those issues is having a pause after each usb control message. In approx. 200 boot cycles no more timeouts were seen. Addionaly, keep USB_QUIRK_DELAY_INIT as it turned out to be necessary to have the delay in hub_port_connect() after hub_port_init(). The overall boot time seems not to be influenced by these additional delays, even on fast machines and lightweight distributions. Fixes: de3af5bf ("usb: quirks: add delay init quirk for Corsair Strafe RGB keyboard") Cc: stable@vger.kernel.org Signed-off-by:
Danilo Krummrich <danilokrummrich@dk-develop.de> Signed-off-by:
-
Colin Ian King authored
commit df3334c2 upstream. Currently the driver attempts to spin lock on udc->lock before a NULL pointer check is performed on udc, hence there is a potential null pointer dereference on udc->lock. Fix this by moving the null check on udc before the lock occurs. Fixes: ea6873a4 ("usbip: vudc: Add SysFS infrastructure for VUDC") Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Reviewed-by:
Krzysztof Opasiak <k.opasiak@samsung.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Teijo Kinnunen authored
commit 5126a504 upstream. This USB-SATA controller seems to be similar with JMicron bridge 152d:2566 already on the list. Adding it here fixes "Invalid field in cdb" errors. Signed-off-by:
Teijo Kinnunen <teijo.kinnunen@code-q.fi> Cc: stable@vger.kernel.org Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Joel Fernandes authored
commit cb57469c upstream. ashmem_mutex create a chain of dependencies like so: (1) mmap syscall -> mmap_sem -> (acquired) ashmem_mmap ashmem_mutex (try to acquire) (block) (2) llseek syscall -> ashmem_llseek -> ashmem_mutex -> (acquired) inode_lock -> inode->i_rwsem (try to acquire) (block) (3) getdents -> iterate_dir -> inode_lock -> inode->i_rwsem (acquired) copy_to_user -> mmap_sem (try to acquire) There is a lock ordering created between mmap_sem and inode->i_rwsem causing a lockdep splat [2] during a syzcaller test, this patch fixes the issue by unlocking the mutex earlier. Functionally that's Ok since we don't need to protect vfs_llseek. [1] https://patchwork.kernel.org/patch/10185031/ [2] https://lkml.org/lkml/2018/1/10/48Acked-by:
Todd Kjos <tkjos@google.com> Cc: Arve Hjonnevag <arve@android.com> Cc: stable@vger.kernel.org Reported-by: syzbot+8ec30bb7bf1a981a2012@syzkaller.appspotmail.com Signed-off-by:
Joel Fernandes <joelaf@google.com> Acked-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
Frank Mori Hess authored
commit a42ae590 upstream. A rounding error was causing comedi_nsamples_left to return the wrong value when nsamples was not a multiple of the scan length. Cc: <stable@vger.kernel.org> # v4.4+ Signed-off-by:
Frank Mori Hess <fmh6jj@gmail.com> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Oliver Neukum authored
commit 9a513c90 upstream. A typo broke the comparison. Fixes: cbeef22f ("usb: uas: unconditionally bring back host after reset") Signed-off-by:
Oliver Neukum <oneukum@suse.com> CC: stable@kernel.org Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Jonas Danielsson authored
commit fd63a890 upstream. On our at91sam9260 based board the usart0 and usart1 ports report their versions (ATMEL_US_VERSION) as 0x10302. This version is not included in the current checks in the driver. Signed-off-by:
Jonas Danielsson <jonas@orbital-systems.com> Acked-by:
Richard Genoud <richard.genoud@gmail.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Ulrich Hecht authored
commit 7842055b upstream. When the TTY buffers fill up to the configured maximum, a system lockup occurs: [ 598.820128] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 598.825796] 0-...!: (1 GPs behind) idle=5a6/2/0 softirq=1974/1974 fqs=1 [ 598.832577] (detected by 3, t=62517 jiffies, g=296, c=295, q=126) [ 598.838755] Task dump for CPU 0: [ 598.841977] swapper/0 R running task 0 0 0 0x00000022 [ 598.849023] Call trace: [ 598.851476] __switch_to+0x98/0xb0 [ 598.854870] (null) This can be prevented by doing a dummy read of the RX data register. This issue affects both HSCIF and SCIF ports. Reported for R-Car H3 ES2.0; reproduced and fixed on H3 ES1.1. Probably affects other R-Car platforms as well. Reported-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Reviewed-by:
Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by:
-
Hans de Goede authored
commit 2d30e949 upstream. The ALC5651 does not like multi-write accesses, avoid them. This fixes: rt5651 i2c-10EC5651:00: Unable to sync registers 0x27-0x28. -121 Errors on resume (and all registers after the registers in the error not being synced). Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Fabio Estevam authored
commit a8992973 upstream. Commit 8419caa7 ("ASoC: sgtl5000: Do not disable regulators in SND_SOC_BIAS_OFF") causes the sgtl5000 to fail after a suspend/resume sequence: Playing WAVE '/media/a2002011001-e02.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo aplay: pcm_write:2051: write error: Input/output error The problem is caused by the fact that the aforementioned commit dropped the cache handling, so re-introduce the register map resync to fix the problem. Suggested-by:
-
H.J. Lu authored
commit b21ebf2f upstream. On i386, there are 2 types of PLTs, PIC and non-PIC. PIE and shared objects must use PIC PLT. To use PIC PLT, you need to load _GLOBAL_OFFSET_TABLE_ into EBX first. There is no need for that on x86-64 since x86-64 uses PC-relative PLT. On x86-64, for 32-bit PC-relative branches, we can generate PLT32 relocation, instead of PC32 relocation, which can also be used as a marker for 32-bit PC-relative branches. Linker can always reduce PLT32 relocation to PC32 if function is defined locally. Local functions should use PC32 relocation. As far as Linux kernel is concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32 since Linux kernel doesn't use PLT. R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in binutils master branch which will become binutils 2.31. [ hjl is working on having better documentation on this all, but a few more notes from him: "PLT32 relocation is used as marker for PC-relative branches. Because of EBX, it looks odd to generate PLT32 relocation on i386 when EBX doesn't have GOT. As for symbol resolution, PLT32 and PC32 relocations are almost interchangeable. But when linker sees PLT32 relocation against a protected symbol, it can resolved locally at link-time since it is used on a branch instruction. Linker can't do that for PC32 relocation" but for the kernel use, the two are basically the same, and this commit gets things building and working with the current binutils master - Linus ] Signed-off-by:
H.J. Lu <hjl.tools@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Josh Poimboeuf authored
commit eda9cec4 upstream. There have been some cases where external tooling (e.g., kpatch-build) creates a corrupt relocation which targets the wrong address. This is a silent failure which can corrupt memory in unexpected places. On x86, the bytes of data being overwritten by relocations are always initialized to zero beforehand. Use that knowledge to add sanity checks to detect such cases before they corrupt memory. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: jeyu@kernel.org Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/37450d6c6225e54db107fba447ce9e56e5f758e9.1509713553.git.jpoimboe@redhat.com [ Restructured the messages, as it's unclear whether the relocation or the target is corrupted. ] Signed-off-by:
-
Trond Myklebust authored
commit c4f24df9 upstream. We do want to respect the FLUSH_SYNC argument to nfs_commit_inode() to ensure that all outstanding COMMIT requests to the inode in question are complete. Currently we may exit early from both nfs_commit_inode() and nfs_write_inode() even if there are COMMIT requests in flight, or unstable writes on the commit list. In order to get the right semantics w.r.t. sync_inode(), we don't need to have nfs_commit_inode() reset the inode dirty flags when called from nfs_wb_page() and/or nfs_wb_all(). We just need to ensure that nfs_write_inode() leaves them in the right state if there are outstanding commits, or stable pages. Reported-by:
Scott Mayhew <smayhew@redhat.com> Fixes: dc4fd9ab ("nfs: don't wait on commit in nfs_commit_inode()...") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit d9ee6553 upstream. The start offset needs to be of type loff_t. Fixed: 5fadeb47 ("nfs: count DIO good bytes correctly with mirroring") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by:
-
Quinn Tran authored
commit 063b36d6 upstream. Current code manually allocate an fcport structure that is not properly initialize. Replace kzalloc with qla2x00_alloc_fcport, so that all fields are initialized. Also set set scan flag to port found Cc: <stable@vger.kernel.org> Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Clay McClure authored
commit a51a0c8d upstream. Similar to commit 714fb87e ("ubi: Fix race condition between ubi device creation and udev"), we should make the volume active before registering it. Signed-off-by:
Clay McClure <clay@daemons.net> Cc: <stable@vger.kernel.org> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
