- 10 Jul, 2016 12 commits
-
-
Peter Meerwald-Stadler authored
Signed-off-by:
Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Peter Meerwald-Stadler authored
and drop unused PROX_DRIVE Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
Signed-off-by:
-
Peter Meerwald-Stadler authored
VCNL4000, VCNL4010 and VCNL4020 chips are fairly compatible from a software point of view, added features are not yet supported by the driver patch adds a check for the product ID and demotes the corresponding dev_info() to dev_dbg() Signed-off-by:
-
Matt Ranostay authored
Add initial driver support for MAX6675, and MAX31855 thermocouple chips. Cc: Marek Vasut <marex@denx.de> Cc: Matt Porter <mporter@konsulko.com> Signed-off-by:
Matt Ranostay <mranostay@gmail.com> Signed-off-by:
-
- 05 Jul, 2016 2 commits
-
-
Bijosh Thykkoottathil authored
Removed unwanted return statements from the function mma8452_set_freefall_mode. Signed-off-by:
Bijosh Thykkoottathil <bijosh.t@hotmail.com> Acked-by:
Martin Kepplinger <martink@posteo.de> Signed-off-by:
-
Bijosh Thykkoottathil authored
mma8452_set_freefall_mode can return -ve value in case if i2c_smbus_read_byte_data fails. This function is called from mma8452_probe, and returning -ve value from probe indicates probe failure. Need to call iio_triggered_buffer_cleanup & iio_trigger_cleanup in this case. Signed-off-by:
-
- 04 Jul, 2016 10 commits
-
-
Jonathan Cameron authored
The tree has been in the same location for a long time. Putting it in MAINTAINERS makes it easy for those new to, or less familiar with IIO to find the correct tree to base patches on. Mostly basing on staging-next is fine as well unless working on a very active driver. Signed-off-by: -
Gregor Boirie authored
Some static channels are explicitly initialized with default values. Remove them to enhance readability. Signed-off-by:
Gregor Boirie <gregor.boirie@parrot.com> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Gregor Boirie authored
Implement lps22hb temperature sampling channel. Signed-off-by:
-
Gregor Boirie authored
Add support for open drain interrupt line. Signed-off-by:
-
Gregor Boirie authored
Enable support for triggered buffering of temperature samples. Signed-off-by:
-
Gregor Boirie authored
Details scaling factors and offsets applied to raw temperature and pressure samples. Signed-off-by:
-
Gregor Boirie authored
Sampled pressure data are 24 bits long and should be stored in a 32 bits word. Signed-off-by:
-
Gregor Boirie authored
Ensure triggered buffering memory accesses are properly aligned on per channel storagebits boundaries. Signed-off-by:
-
Jonathan Cameron authored
Retire this venerable driver as the basic support is now in the generic st-sensors accelerometer driver. There are a few missing features in the new driver: * Threshold events. * Access to the calibration adjustment registers (patch shortly) In exchange it brings a cleaner and more maintainable code base that actually gets tested more than once every few years. I'll actually be suprised if anyone other than me has a board with one of these on that is running an up to date kernel. Signed-off-by: -
Jonathan Cameron authored
Time to finally kill off the venerable (it was one of my first drivers) lis3l02dq driver in favour of adding support in the st sensors framework. This does loose us the event support that driver always had, but I think that will reappear at some point and in the meantime the maintenance advantages of dropping the 'special' driver for this one part outweigh the issues. It's worth noting this part is ancient and I may well be the only person who still has any on hardware running recent kernels. It has a few 'quirks'. - No WAI register so that just became optional. - A BDU option that really does block updates. Completely. Whatever you do, you don't get any more data with it set. It is documented the same as more modern parts but I presume they are actually clearing for updates after a read of both bytes! - Fixed scale. - It's too quick. Even at slowest rate (280Hz) I can't read out fast enough on my board (stargate 2) to beat new data coming in. Linus' repeat read patch doesn't help in this case. It just means I get 10 readings before dying... So in reality this will get used with software triggers only unless someone has this long out of production device on a quick board. Signed-off-by:
-
- 03 Jul, 2016 16 commits
-
-
Matt Ranostay authored
Adding missing indio_dev->dev.of_node references to allow iio consumers to access the device channels. Signed-off-by:
-
Matt Ranostay authored
Add the pointer to the device tree node of the ADC so that iio consumers can reference the respective channels. Signed-off-by:
Daniel Baluta <daniel.baluta@intel.com> Signed-off-by:
-
Florian Vaussard authored
Fix s/potentiomenter/potentiometer/. Suggested-by:
Florian Vaussard <florian.vaussard@heig-vd.ch> Signed-off-by:
-
Florian Vaussard authored
This patch adds the necessary device tree binding to allow DT probing of currently supported parts. Signed-off-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Florian Vaussard authored
Add the device tree documentation for all the supported parts. Apart the compatible string and standard I2C binding, no other binding is currently needed. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Florian Vaussard authored
This patch adds support for MCP454x, MCP456x, MCP464x and MCP466x parts. The main difference with currently supported parts (MCP453x and alike) is the addition of a non-volatile memory in order to recall the wiper setting at power-on. This feature is currently not supported and only the volatile memory is used to set the wiper. Signed-off-by:
-
Gregor Boirie authored
Introduce support for Invense ICM20608 IMU, a 6-axis motion tracking device that combines a 3-axis gyroscope and a 3-axis accelerometer: http://www.invensense.com/products/motion-tracking/6-axis/icm-20608-2Signed-off-by:
-
Florian Vaussard authored
This patch adds the necessary device tree binding to allow DT probing of currently supported parts. Signed-off-by:
-
Florian Vaussard authored
Add the device tree documentation for all the supported parts. Mandatory binding is the compatible string and the slave I2C address. Optional properties can be used to specify the Vcc / Vref regulators, as well as the IRQ line if available. Acked-by:
-
Steffen Trumtrar authored
The filter frequency and sample rate have a fixed relationship. Only the filter frequency is unique, however. Currently the driver ignores the filter settings for 32 Hz and 64 Hz. This patch adds the necessary callbacks to be able to configure and read the filter setting from sysfs. Signed-off-by:
Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by:
-
Raveendra Padasalagi authored
This patch adds basic driver implementation for Broadcom's static adc controller used in iProc SoC's family. Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Reviewed-by:
Ray Jui <ray.jui@broadcom.com> Reviewed-by:
Scott Branden <scott.branden@broadcom.com> Signed-off-by:
-
Raveendra Padasalagi authored
The patch adds devicetree binding document for broadcom's iproc-static-adc controller driver. Signed-off-by:
-
Linus Walleij authored
The calibration data is described as coming from an E2PROM and that means it does not change. Just read it once at probe time and store it in the device state container. Also toss the calibration data into the entropy pool since it is device unique. Reviewed-by:
Vlad Dogaru <vlad.dogaru@intel.com> Signed-off-by:
-
Linus Walleij authored
The PM280 has an internal standby-mode, but to really save power we should shut the sensor down and disconnect the power. With the proper .pm hooks we can enable both runtime and system power management of the sensor. We use the *force callbacks from the system PM hooks. When the sensor comes back we always reconfigure it to make sure it is ready to roll as expected. Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Linus Walleij authored
The first version of this sensor, BMP085, supports sending an End-of-Conversion (EOC) interrupt. Add code to support this using a completion, in a similar vein as drivers/misc/bmp085.c does. Make sure to check that we are given a rising edge, because the EOC line goes from low-to-high when the conversion is ready. Signed-off-by:
-
Linus Walleij authored
This patch mimics the SPI functionality found in the misc driver in drivers/misc/bh085-spi.c to make it possible to reuse the existing BMP280/BMP180/BMP085 driver with all clients of the other driver. The adoption is straight-forward since like the other driver, it is a simple matter of using regmap. This driver is also so obviously inspired/copied from the old misc driver in drivers/misc/bmp085.c that I just took the liberty to add in the authors of the other drivers + self in the core driver file. The MISC driver also supports a variant named "BMP181" so include that here to be complete in comparison to the old driver. The bus mapping code for SPI was written by Akinobu Mita. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Tested-by:
-
