- 03 Oct, 2016 1 commit
-
-
Shaohua Li authored
if all disks in an array are non-rotational, set the array non-rotational. This only works for array with all disks populated at startup. Support for disk hotadd/hotremove could be added later if necessary. Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Shaohua Li <shli@fb.com>
-
- 26 Sep, 2016 1 commit
-
-
Gayatri Kammela authored
Specifying the aligned attributes to the char data[NDISKS][PAGE_SIZE], char recovi[PAGE_SIZE] and char recovi[PAGE_SIZE] arrays, so that all malloc memory is page boundary aligned. Without these alignment attributes, the test causes a segfault in userspace when the NDISKS are changed to 4 from 16. The RAID stripes will be page aligned anyway, so we want to test what the kernel actually will execute. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Signed-off-by:
Gayatri Kammela <gayatri.kammela@intel.com> Reviewed-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
- 21 Sep, 2016 19 commits
-
-
Shaohua Li authored
register_shrinker() now can fail. When it happens, shrinker.nr_deferred is null. We use it to determine if unregister_shrinker is required. Signed-off-by: -
Chao Yu authored
register_shrinker can fail after commit 1d3d4437 ("vmscan: per-node deferred work"), we should detect the failure of it, otherwise we may fail to register shrinker after raid5 configuration was setup successfully. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
-
Shaohua Li authored
lockdep reports a potential deadlock. Fix this by droping the mutex before md_import_device [ 1137.126601] ====================================================== [ 1137.127013] [ INFO: possible circular locking dependency detected ] [ 1137.127013] 4.8.0-rc4+ #538 Not tainted [ 1137.127013] ------------------------------------------------------- [ 1137.127013] mdadm/16675 is trying to acquire lock: [ 1137.127013] (&bdev->bd_mutex){+.+.+.}, at: [<ffffffff81243cf3>] __blkdev_get+0x63/0x450 [ 1137.127013] but task is already holding lock: [ 1137.127013] (detected_devices_mutex){+.+.+.}, at: [<ffffffff81a5138c>] md_ioctl+0x2ac/0x1f50 [ 1137.127013] which lock already depends on the new lock. [ 1137.127013] the existing dependency chain (in reverse order) is: [ 1137.127013] -> #1 (detected_devices_mutex){+.+.+.}: [ 1137.127013] [<ffffffff810b6f19>] lock_acquire+0xb9/0x220 [ 1137.127013] [<ffffffff81c51647>] mutex_lock_nested+0x67/0x3d0 [ 1137.127013] [<ffffffff81a4eeaf>] md_autodetect_dev+0x3f/0x90 [ 1137.127013] [<ffffffff81595be8>] rescan_partitions+0x1a8/0x2c0 [ 1137.127013] [<ffffffff81590081>] __blkdev_reread_part+0x71/0xb0 [ 1137.127013] [<ffffffff815900e5>] blkdev_reread_part+0x25/0x40 [ 1137.127013] [<ffffffff81590c4b>] blkdev_ioctl+0x51b/0xa30 [ 1137.127013] [<ffffffff81242bf1>] block_ioctl+0x41/0x50 [ 1137.127013] [<ffffffff81214c96>] do_vfs_ioctl+0x96/0x6e0 [ 1137.127013] [<ffffffff81215321>] SyS_ioctl+0x41/0x70 [ 1137.127013] [<ffffffff81c56825>] entry_SYSCALL_64_fastpath+0x18/0xa8 [ 1137.127013] -> #0 (&bdev->bd_mutex){+.+.+.}: [ 1137.127013] [<ffffffff810b6af2>] __lock_acquire+0x1662/0x1690 [ 1137.127013] [<ffffffff810b6f19>] lock_acquire+0xb9/0x220 [ 1137.127013] [<ffffffff81c51647>] mutex_lock_nested+0x67/0x3d0 [ 1137.127013] [<ffffffff81243cf3>] __blkdev_get+0x63/0x450 [ 1137.127013] [<ffffffff81244307>] blkdev_get+0x227/0x350 [ 1137.127013] [<ffffffff812444f6>] blkdev_get_by_dev+0x36/0x50 [ 1137.127013] [<ffffffff81a46d65>] lock_rdev+0x35/0x80 [ 1137.127013] [<ffffffff81a49bb4>] md_import_device+0xb4/0x1b0 [ 1137.127013] [<ffffffff81a513d6>] md_ioctl+0x2f6/0x1f50 [ 1137.127013] [<ffffffff815909b3>] blkdev_ioctl+0x283/0xa30 [ 1137.127013] [<ffffffff81242bf1>] block_ioctl+0x41/0x50 [ 1137.127013] [<ffffffff81214c96>] do_vfs_ioctl+0x96/0x6e0 [ 1137.127013] [<ffffffff81215321>] SyS_ioctl+0x41/0x70 [ 1137.127013] [<ffffffff81c56825>] entry_SYSCALL_64_fastpath+0x18/0xa8 [ 1137.127013] other info that might help us debug this: [ 1137.127013] Possible unsafe locking scenario: [ 1137.127013] CPU0 CPU1 [ 1137.127013] ---- ---- [ 1137.127013] lock(detected_devices_mutex); [ 1137.127013] lock(&bdev->bd_mutex); [ 1137.127013] lock(detected_devices_mutex); [ 1137.127013] lock(&bdev->bd_mutex); [ 1137.127013] *** DEADLOCK *** Cc: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: -
Shaohua Li authored
if bitmap_create fails, the bitmap is already cleaned up and the returned value is an error number. We can't do the cleanup again. Reported-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Shaohua Li authored
raid5 will split bio to proper size internally, there is no point to use underlayer disk's max_hw_sectors. In my qemu system, without the change, the raid5 only receives 128k size bio, which reduces the chance of bio merge sending to underlayer disks. Signed-off-by: -
Gayatri Kammela authored
Optimize RAID6 xor_syndrome functions to take advantage of the 512-bit ZMM integer instructions introduced in AVX512. AVX512 optimized xor_syndrome functions, which is simply based on sse2.c written by hpa. The patch was tested and benchmarked before submission on a hardware that has AVX512 flags to support such instructions Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jim Kukunas <james.t.kukunas@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Megha Dey <megha.dey@linux.intel.com> Signed-off-by:
Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
-
Gayatri Kammela authored
Adding avx512 gen_syndrome and recovery functions so as to allow code to be compiled and tested successfully in userspace. This patch is tested in userspace and improvement in performace is observed. Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jim Kukunas <james.t.kukunas@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
Megha Dey <megha.dey@linux.intel.com> Signed-off-by:
-
Gayatri Kammela authored
Optimize RAID6 recovery functions to take advantage of the 512-bit ZMM integer instructions introduced in AVX512. AVX512 optimized recovery functions, which is simply based on recov_avx2.c written by Jim Kukunas This patch was tested and benchmarked before submission on a hardware that has AVX512 flags to support such instructions Cc: Jim Kukunas <james.t.kukunas@linux.intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
-
Gayatri Kammela authored
Optimize RAID6 gen_syndrom functions to take advantage of the 512-bit ZMM integer instructions introduced in AVX512. AVX512 optimized gen_syndrom functions, which is simply based on avx2.c written by Yuanhan Liu and sse2.c written by hpa. The patch was tested and benchmarked before submission on a hardware that has AVX512 flags to support such instructions Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jim Kukunas <james.t.kukunas@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by:
-
Guoqing Jiang authored
When one node is perform resync or recovery, other nodes can't get resync lock and could block for a while before it holds the lock, so we can't stop array immediately for this scenario. To make array could be stop quickly, we check MD_CLOSING in dlm_lock_sync_interruptible to make us can interrupt the lock request. Reviewed-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Guoqing Jiang <gqjiang@suse.com> Signed-off-by:
-
Guoqing Jiang authored
When some node leaves cluster, then it's bitmap need to be synced by another node, so "md*_recover" thread is triggered for the purpose. However, with below steps. we can find tasks hang happened either in B or C. 1. Node A create a resyncing cluster raid1, assemble it in other two nodes (B and C). 2. stop array in B and C. 3. stop array in A. linux44:~ # ps aux|grep md|grep D root 5938 0.0 0.1 19852 1964 pts/0 D+ 14:52 0:00 mdadm -S md0 root 5939 0.0 0.0 0 0 ? D 14:52 0:00 [md0_recover] linux44:~ # cat /proc/5939/stack [<ffffffffa04cf321>] dlm_lock_sync+0x71/0x90 [md_cluster] [<ffffffffa04d0705>] recover_bitmaps+0x125/0x220 [md_cluster] [<ffffffffa052105d>] md_thread+0x16d/0x180 [md_mod] [<ffffffff8107ad94>] kthread+0xb4/0xc0 [<ffffffff8152a518>] ret_from_fork+0x58/0x90 linux44:~ # cat /proc/5938/stack [<ffffffff8107afde>] kthread_stop+0x6e/0x120 [<ffffffffa0519da0>] md_unregister_thread+0x40/0x80 [md_mod] [<ffffffffa04cfd20>] leave+0x70/0x120 [md_cluster] [<ffffffffa0525e24>] md_cluster_stop+0x14/0x30 [md_mod] [<ffffffffa05269ab>] bitmap_free+0x14b/0x150 [md_mod] [<ffffffffa0523f3b>] do_md_stop+0x35b/0x5a0 [md_mod] [<ffffffffa0524e83>] md_ioctl+0x873/0x1590 [md_mod] [<ffffffff81288464>] blkdev_ioctl+0x214/0x7d0 [<ffffffff811dd3dd>] block_ioctl+0x3d/0x40 [<ffffffff811b92d4>] do_vfs_ioctl+0x2d4/0x4b0 [<ffffffff811b9538>] SyS_ioctl+0x88/0xa0 [<ffffffff8152a5c9>] system_call_fastpath+0x16/0x1b The problem is caused by recover_bitmaps can't reliably abort when the thread is unregistered. So dlm_lock_sync_interruptible is introduced to detect the thread's situation to fix the problem. Reviewed-by:
-
Guoqing Jiang authored
Previously, we used completion to sync between require dlm lock and sync_ast, however we will have to expose completion.wait and completion.done in dlm_lock_sync_interruptible (introduced later), it is not a common usage for completion, so convert related things to wait queue. Reviewed-by:
-
Guoqing Jiang authored
We need to use rcu_read_lock/unlock to avoid potential race. Reported-by:
-
Guoqing Jiang authored
cluster_info and bitmap_info.nodes also need to be cleared when array is stopped. Reviewed-by:
-
Guoqing Jiang authored
When stop clustered raid while it is pending on resync, MD_STILL_CLOSED flag could be cleared since udev rule is triggered to open the mddev. So obviously array can't be stopped soon and returns EBUSY. mdadm -Ss md-raid-arrays.rules set MD_STILL_CLOSED md_open() ... ... ... clear MD_STILL_CLOSED do_md_stop We make below changes to resolve this issue: 1. rename MD_STILL_CLOSED to MD_CLOSING since it is set when stop array and it means we are stopping array. 2. let md_open returns early if CLOSING is set, so no other threads will open array if one thread is trying to close it. 3. no need to clear CLOSING bit in md_open because 1 has ensure the bit is cleared, then we also don't need to test CLOSING bit in do_md_stop. Reviewed-by:
-
Guoqing Jiang authored
Since DLM_LKF_FORCEUNLOCK is used in lockres_free, we don't need to call dlm_unlock_sync before free lock resource. Reviewed-by:
-
Guoqing Jiang authored
For dlm_unlock, we need to pass flag to dlm_unlock as the third parameter instead of set res->flags. Also, DLM_LKF_FORCEUNLOCK is more suitable for dlm_unlock since it works even the lock is on waiting or convert queue. Acked-by:
-
Guoqing Jiang authored
The new_disk_ack could return failure if WAITING_FOR_NEWDISK is not set, so we need to kick the dev from array in case failure happened. And we missed to check err before call new_disk_ack othwise we could kick a rdev which isn't in array, thanks for the reminder from Shaohua. Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull usercopy hardening fix from Kees Cook: "Expand the arm64 vmalloc check to include skipping the module space too" * tag 'usercopy-v4.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: mm: usercopy: Check for module addresses
-
- 20 Sep, 2016 4 commits
-
-
Al Viro authored
Switching iov_iter fault-in to multipages variants has exposed an old bug in underlying fault_in_multipages_...(); they break if the range passed to them wraps around. Normally access_ok() done by callers will prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into such a range and they should not point to any valid objects). However, on architectures where userland and kernel live in different MMU contexts (e.g. s390) access_ok() is a no-op and on those a range with a wraparound can reach fault_in_multipages_...(). Since any wraparound means EFAULT there, the fix is trivial - turn those while (uaddr <= end) ... into if (unlikely(uaddr > end)) return -EFAULT; do ... while (uaddr <= end); Reported-by:Jan Stancek <jstancek@redhat.com> Tested-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Laura Abbott authored
While running a compile on arm64, I hit a memory exposure usercopy: kernel memory exposure attempt detected from fffffc0000f3b1a8 (buffer_head) (1 bytes) ------------[ cut here ]------------ kernel BUG at mm/usercopy.c:75! Internal error: Oops - BUG: 0 [#1] SMP Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_broute bridge stp llc ebtable_nat ip6table_security ip6table_raw ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle iptable_security iptable_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables vfat fat xgene_edac xgene_enet edac_core i2c_xgene_slimpro i2c_core at803x realtek xgene_dma mdio_xgene gpio_dwapb gpio_xgene_sb xgene_rng mailbox_xgene_slimpro nfsd auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c sdhci_of_arasan sdhci_pltfm sdhci mmc_core xhci_plat_hcd gpio_keys CPU: 0 PID: 19744 Comm: updatedb Tainted: G W 4.8.0-rc3-threadinfo+ #1 Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board, BIOS 3.06.12 Aug 12 2016 task: fffffe03df944c00 task.stack: fffffe00d128c000 PC is at __check_object_size+0x70/0x3f0 LR is at __check_object_size+0x70/0x3f0 ... [<fffffc00082b4280>] __check_object_size+0x70/0x3f0 [<fffffc00082cdc30>] filldir64+0x158/0x1a0 [<fffffc0000f327e8>] __fat_readdir+0x4a0/0x558 [fat] [<fffffc0000f328d4>] fat_readdir+0x34/0x40 [fat] [<fffffc00082cd8f8>] iterate_dir+0x190/0x1e0 [<fffffc00082cde58>] SyS_getdents64+0x88/0x120 [<fffffc0008082c70>] el0_svc_naked+0x24/0x28 fffffc0000f3b1a8 is a module address. Modules may have compiled in strings which could get copied to userspace. In this instance, it looks like "." which matches with a size of 1 byte. Extend the is_vmalloc_addr check to be is_vmalloc_or_module_addr to cover all possible cases. Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Kees Cook <keescook@chromium.org>
-
Jiri Olsa authored
We hit hardened usercopy feature check for kernel text access by reading kcore file: usercopy: kernel memory exposure attempt detected from ffffffff8179a01f (<kernel text>) (4065 bytes) kernel BUG at mm/usercopy.c:75! Bypassing this check for kcore by adding bounce buffer for ktext data. Reported-by:
Steve Best <sbest@redhat.com> Fixes: f5509cc1 ("mm: Hardened usercopy") Suggested-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
-
Jiri Olsa authored
Next patch adds bounce buffer for ktext area, so it's convenient to have single bounce buffer for both vmalloc/module and ktext cases. Suggested-by:
-
- 19 Sep, 2016 15 commits
-
-
Linus Torvalds authored
Merge fixes from Andrew Morton: "20 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: rapidio/rio_cm: avoid GFP_KERNEL in atomic context Revert "ocfs2: bump up o2cb network protocol version" ocfs2: fix start offset to ocfs2_zero_range_for_truncate() cgroup: duplicate cgroup reference when cloning sockets mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting ocfs2: fix double unlock in case retry after free truncate log fanotify: fix list corruption in fanotify_get_response() fsnotify: add a way to stop queueing events on group shutdown ocfs2: fix trans extend while free cached blocks ocfs2: fix trans extend while flush truncate log ipc/shm: fix crash if CONFIG_SHMEM is not set mm: fix the page_swap_info() BUG_ON check autofs: use dentry flags to block walks during expire MAINTAINERS: update email for VLYNQ bus entry mm: avoid endless recursion in dump_page() mm, thp: fix leaking mapped pte in __collapse_huge_page_swapin() khugepaged: fix use-after-free in collapse_huge_page() MAINTAINERS: Maik has moved ocfs2/dlm: fix race between convert and migration mem-hotplug: don't clear the only node in new_node_page()
-
Alexandre Bounine authored
As reported by Alexey Khoroshilov (https://lkml.org/lkml/2016/9/9/737): riocm_send_close() is called from rio_cm_shutdown() under spin_lock_bh(idr_lock), but riocm_send_close() uses a GFP_KERNEL allocation. Fix by taking riocm_send_close() outside of spinlock protected code. [akpm@linux-foundation.org: remove unneeded `if (!list_empty())'] Link: http://lkml.kernel.org/r/20160915175402.10122-1-alexandre.bounine@idt.comSigned-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Reported-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Junxiao Bi authored
This reverts commit 38b52efd ("ocfs2: bump up o2cb network protocol version"). This commit made rolling upgrade fail. When one node is upgraded to new version with this commit, the remaining nodes will fail to establish connections to it, then the application like VMs on the remaining nodes can't be live migrated to the upgraded one. This will cause an outage. Since negotiate hb timeout behavior didn't change without this commit, so revert it. Fixes: 38b52efd ("ocfs2: bump up o2cb network protocol version") Link: http://lkml.kernel.org/r/1471396924-10375-1-git-send-email-junxiao.bi@oracle.comSigned-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Ashish Samant authored
If we punch a hole on a reflink such that following conditions are met: 1. start offset is on a cluster boundary 2. end offset is not on a cluster boundary 3. (end offset is somewhere in another extent) or (hole range > MAX_CONTIG_BYTES(1MB)), we dont COW the first cluster starting at the start offset. But in this case, we were wrongly passing this cluster to ocfs2_zero_range_for_truncate() to zero out. This will modify the cluster in place and zero it in the source too. Fix this by skipping this cluster in such a scenario. To reproduce: 1. Create a random file of say 10 MB xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile 2. Reflink it reflink -f 10MBfile reflnktest 3. Punch a hole at starting at cluster boundary with range greater that 1MB. You can also use a range that will put the end offset in another extent. fallocate -p -o 0 -l 1048615 reflnktest 4. sync 5. Check the first cluster in the source file. (It will be zeroed out). dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.comSigned-off-by:Ashish Samant <ashish.samant@oracle.com> Reported-by:
Saar Maoz <saar.maoz@oracle.com> Reviewed-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Eric Ren <zren@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Johannes Weiner authored
When a socket is cloned, the associated sock_cgroup_data is duplicated but not its reference on the cgroup. As a result, the cgroup reference count will underflow when both sockets are destroyed later on. Fixes: bd1060a1 ("sock, cgroup: add sock->sk_cgroup") Link: http://lkml.kernel.org/r/20160914194846.11153-2-hannes@cmpxchg.orgSigned-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
Johannes Weiner authored
During cgroup2 rollout into production, we started encountering css refcount underflows and css access crashes in the memory controller. Splitting the heavily shared css reference counter into logical users narrowed the imbalance down to the cgroup2 socket memory accounting. The problem turns out to be the per-cpu charge cache. Cgroup1 had a separate socket counter, but the new cgroup2 socket accounting goes through the common charge path that uses a shared per-cpu cache for all memory that is being tracked. Those caches are safe against scheduling preemption, but not against interrupts - such as the newly added packet receive path. When cache draining is interrupted by network RX taking pages out of the cache, the resuming drain operation will put references of in-use pages, thus causing the imbalance. Disable IRQs during all per-cpu charge cache operations. Fixes: f7e1cb6e ("mm: memcontrol: account socket memory in unified hierarchy memory controller") Link: http://lkml.kernel.org/r/20160914194846.11153-1-hannes@cmpxchg.orgSigned-off-by:
-
Joseph Qi authored
If ocfs2_reserve_cluster_bitmap_bits() fails with ENOSPC, it will try to free truncate log and then retry. Since ocfs2_try_to_free_truncate_log will lock/unlock global bitmap inode, we have to unlock it before calling this function. But when retry reserve and it fails with no global bitmap inode lock taken, it will unlock again in error handling branch and BUG. This issue also exists if no need retry and then ocfs2_inode_lock fails. So fix it. Fixes: 2070ad1a ("ocfs2: retry on ENOSPC if sufficient space in truncate log") Link: http://lkml.kernel.org/r/57D91939.6030809@huawei.comSigned-off-by:
Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
Jiufei Xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Jan Kara authored
fanotify_get_response() calls fsnotify_remove_event() when it finds that group is being released from fanotify_release() (bypass_perm is set). However the event it removes need not be only in the group's notification queue but it can have already moved to access_list (userspace read the event before closing the fanotify instance fd) which is protected by a different lock. Thus when fsnotify_remove_event() races with fanotify_release() operating on access_list, the list can get corrupted. Fix the problem by moving all the logic removing permission events from the lists to one place - fanotify_release(). Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.czSigned-off-by:
Jan Kara <jack@suse.cz> Reported-by:
Miklos Szeredi <mszeredi@redhat.com> Tested-by:
-
Jan Kara authored
Implement a function that can be called when a group is being shutdown to stop queueing new events to the group. Fanotify will use this. Fixes: 5838d444 ("fanotify: fix double free of pending permission events") Link: http://lkml.kernel.org/r/1473797711-14111-2-git-send-email-jack@suse.czSigned-off-by:
-
Junxiao Bi authored
The root cause of this issue is the same with the one fixed by the last patch, but this time credits for allocator inode and group descriptor may not be consumed before trans extend. The following error was caught: WARNING: CPU: 0 PID: 2037 at fs/jbd2/transaction.c:269 start_this_handle+0x4c3/0x510 [jbd2]() Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_netfront parport_pc parport pcspkr i2c_piix4 i2c_core acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 2037 Comm: rm Tainted: G W 4.1.12-37.6.3.el6uek.bug24573128v2.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016 Call Trace: dump_stack+0x48/0x5c warn_slowpath_common+0x95/0xe0 warn_slowpath_null+0x1a/0x20 start_this_handle+0x4c3/0x510 [jbd2] jbd2__journal_restart+0x161/0x1b0 [jbd2] jbd2_journal_restart+0x13/0x20 [jbd2] ocfs2_extend_trans+0x74/0x220 [ocfs2] ocfs2_free_cached_blocks+0x16b/0x4e0 [ocfs2] ocfs2_run_deallocs+0x70/0x270 [ocfs2] ocfs2_commit_truncate+0x474/0x6f0 [ocfs2] ocfs2_truncate_for_delete+0xbd/0x380 [ocfs2] ocfs2_wipe_inode+0x136/0x6a0 [ocfs2] ocfs2_delete_inode+0x2a2/0x3e0 [ocfs2] ocfs2_evict_inode+0x28/0x60 [ocfs2] evict+0xab/0x1a0 iput_final+0xf6/0x190 iput+0xc8/0xe0 do_unlinkat+0x1b7/0x310 SyS_unlinkat+0x22/0x40 system_call_fastpath+0x12/0x71 ---[ end trace a62437cb060baa71 ]--- JBD2: rm wants too many credits (149 > 128) Link: http://lkml.kernel.org/r/1473674623-11810-2-git-send-email-junxiao.bi@oracle.comSigned-off-by: -
Junxiao Bi authored
Every time, ocfs2_extend_trans() included a credit for truncate log inode, but as that inode had been managed by jbd2 running transaction first time, it will not consume that credit until jbd2_journal_restart(). Since total credits to extend always included the un-consumed ones, there will be more and more un-consumed credit, at last jbd2_journal_restart() will fail due to credit number over the half of max transction credit. The following error was caught when unlinking a large file with many extents: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13626 at fs/jbd2/transaction.c:269 start_this_handle+0x4c3/0x510 [jbd2]() Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea parport_pc parport pcspkr i2c_piix4 i2c_core acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 13626 Comm: unlink Tainted: G W 4.1.12-37.6.3.el6uek.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016 Call Trace: dump_stack+0x48/0x5c warn_slowpath_common+0x95/0xe0 warn_slowpath_null+0x1a/0x20 start_this_handle+0x4c3/0x510 [jbd2] jbd2__journal_restart+0x161/0x1b0 [jbd2] jbd2_journal_restart+0x13/0x20 [jbd2] ocfs2_extend_trans+0x74/0x220 [ocfs2] ocfs2_replay_truncate_records+0x93/0x360 [ocfs2] __ocfs2_flush_truncate_log+0x13e/0x3a0 [ocfs2] ocfs2_remove_btree_range+0x458/0x7f0 [ocfs2] ocfs2_commit_truncate+0x1b3/0x6f0 [ocfs2] ocfs2_truncate_for_delete+0xbd/0x380 [ocfs2] ocfs2_wipe_inode+0x136/0x6a0 [ocfs2] ocfs2_delete_inode+0x2a2/0x3e0 [ocfs2] ocfs2_evict_inode+0x28/0x60 [ocfs2] evict+0xab/0x1a0 iput_final+0xf6/0x190 iput+0xc8/0xe0 do_unlinkat+0x1b7/0x310 SyS_unlink+0x16/0x20 system_call_fastpath+0x12/0x71 ---[ end trace 28aa7410e69369cf ]--- JBD2: unlink wants too many credits (251 > 128) Link: http://lkml.kernel.org/r/1473674623-11810-1-git-send-email-junxiao.bi@oracle.comSigned-off-by: -
Kirill A. Shutemov authored
Commit c01d5b30 ("shmem: get_unmapped_area align huge page") makes use of shm_get_unmapped_area() in shm_file_operations() unconditional to CONFIG_MMU. As Tony Battersby pointed this can lead NULL-pointer dereference on machine with CONFIG_MMU=y and CONFIG_SHMEM=n. In this case ipc/shm is backed by ramfs which doesn't provide f_op->get_unmapped_area for configurations with MMU. The solution is to provide dummy f_op->get_unmapped_area for ramfs when CONFIG_MMU=y, which just call current->mm->get_unmapped_area(). Fixes: c01d5b30 ("shmem: get_unmapped_area align huge page") Link: http://lkml.kernel.org/r/20160912102704.140442-1-kirill.shutemov@linux.intel.comSigned-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by:
Tony Battersby <tonyb@cybernetics.com> Tested-by:
-
Santosh Shilimkar authored
Commit 62c230bc ("mm: add support for a filesystem to activate swap files and use direct_IO for writing swap pages") replaced the swap_aops dirty hook from __set_page_dirty_no_writeback() with swap_set_page_dirty(). For normal cases without these special SWP flags code path falls back to __set_page_dirty_no_writeback() so the behaviour is expected to be the same as before. But swap_set_page_dirty() makes use of the page_swap_info() helper to get the swap_info_struct to check for the flags like SWP_FILE, SWP_BLKDEV etc as desired for those features. This helper has BUG_ON(!PageSwapCache(page)) which is racy and safe only for the set_page_dirty_lock() path. For the set_page_dirty() path which is often needed for cases to be called from irq context, kswapd() can toggle the flag behind the back while the call is getting executed when system is low on memory and heavy swapping is ongoing. This ends up with undesired kernel panic. This patch just moves the check outside the helper to its users appropriately to fix kernel panic for the described path. Couple of users of helpers already take care of SwapCache condition so I skipped them. Link: http://lkml.kernel.org/r/1473460718-31013-1-git-send-email-santosh.shilimkar@oracle.comSigned-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Joe Perches <joe@perches.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rik van Riel <riel@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Jens Axboe <axboe@fb.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Hugh Dickins <hughd@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [4.7.x] Signed-off-by:
-
Ian Kent authored
Somewhere along the way the autofs expire operation has changed to hold a spin lock over expired dentry selection. The autofs indirect mount expired dentry selection is complicated and quite lengthy so it isn't appropriate to hold a spin lock over the operation. Commit 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") added a might_sleep() to dput() causing a WARN_ONCE() about this usage to be issued. But the spin lock doesn't need to be held over this check, the autofs dentry info. flags are enough to block walks into dentrys during the expire. I've left the direct mount expire as it is (for now) because it is much simpler and quicker than the indirect mount expire and adding spin lock release and re-aquires would do nothing more than add overhead. Fixes: 47be6184 ("fs/dcache.c: avoid soft-lockup in dput()") Link: http://lkml.kernel.org/r/20160912014017.1773.73060.stgit@pluto.themaw.netSigned-off-by:
Ian Kent <raven@themaw.net> Reported-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
-
Florian Fainelli authored
Link: http://lkml.kernel.org/r/1473218738-21836-1-git-send-email-f.fainelli@gmail.comSigned-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
