- 17 Feb, 2023 1 commit
-
-
Ville Syrjälä authored
Restructure intel_bios_port_aux_ch() to resemble the ddc_pin counterpart, where the intel_bios.c stuff only deals with the child device definition, and the platform default will come from elsewhere. This requires the introduction of AUX_CH_NONE as the value 0 is already taken to mean AUX_CH_A. v2: Sort includes alphabetically (Ankit) vCould we ask them to do a BIOS fix for all of them so that we wouldn't keep getting these bug reports for each model separately? Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230216231312.32664-1-ville.syrjala@linux.intel.comReviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com>
-
- 16 Feb, 2023 27 commits
-
-
Ashutosh Dixit authored
Previous documentation suggested that the PL1 power limit is always enabled in HW. However we now find this not to be the case on some platforms (such as ATSM). Therefore enable the PL1 power limit (by setting the enable bit) when writing the PL1 limit value to HW. Bspec: 51864 Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Ashutosh Dixit authored
hwm_field_scale_and_write has a single caller hwm_power_write and is specific to hwm_power_write but makes it appear that it is a general function which can have multiple callers. Replace the function with hwm_power_max_write which is specific to hwm_power_write and use that in future patches where the function needs to be extended. Signed-off-by:
-
Ville Syrjälä authored
Switch a lot of the intel_bios_foo() stuff to just accept the devdata (VBT child device info) directly, instead of taking detours via vbt.ports[]. Also unify the function naming scheme. v2: Drop the redundant "encoder" from the dp/hdmi specific functions Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Most of the .fb_create() failure paths are annotated but there are a few that seem capable of failing silently (well, higher level code should print something, just not anything actually useful). Drop a few more hints into the log to aid in debugging. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com>
-
Ville Syrjälä authored
We are failing to free the already allocated DPT if the final drm_framebuffer_init() fails. That would require idr_alloc() to fail, so not very likely, but let's add the cleanup code anyway. Signed-off-by:
-
Ville Syrjälä authored
Do the ELD hexdumps only up to the last differing byte. The rest is typically all zeroes anyway so not much point in dumping it. Couldn't find anything for memcmp_diff_len() so rolled my own. v2: Use semantics and function name suggested by Jani Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
With multi panel machines becoming more prominent it's also important to know which connector's backlight we're talking about. Include that information in all the backlight debug/error messages. Signed-off-by:
-
Mavroudis Chatzilaridis authored
This laptop uses inverted backlight PWM. Thus, without this quirk, backlight brightness decreases as the brightness value increases and vice versa. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8013 Cc: stable@vger.kernel.org Signed-off-by:
Mavroudis Chatzilaridis <mavchatz@protonmail.com> Reviewed-by:
-
Andrzej Hajda authored
The helper makes the code more compact and readable. Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by:
-
Andrzej Hajda authored
The helper makes the code more compact and readable. Signed-off-by:
-
Andrzej Hajda authored
The helper makes the code more compact and readable. Signed-off-by:
-
Andrzej Hajda authored
The helper makes the code more compact and readable. Signed-off-by:
-
Andrzej Hajda authored
The helper makes the code more compact and readable. Signed-off-by:
-
Andrzej Hajda authored
The helper makes the code more compact and readable. Signed-off-by:
-
Andrzej Hajda authored
The helper makes the code more compact and readable. Signed-off-by:
-
Andrzej Hajda authored
The helper makes the code more compact and readable. Signed-off-by:
-
Jani Nikula authored
Disabling ILK+ watermarks on failure to read the watermark levels dates back to 2010 and commit 7f8a8569 ("drm/i915: Add the support of memory self-refresh on Ironlake"), with no explanations, and it's been copied and modified from that ever since. Finally drop it. If the value are actually zero, the ilk_compute_*_wm() functions should handle it gracefully. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by:
-
Jani Nikula authored
The file was never really about pm types, and now it's even more obvious. Move under display as intel_wm_types.h. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Follow the new convention of placing debugfs with the code. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
The sanitization should be limited to PCH split platforms up to display version 8. Warn and bail out otherwise. Signed-off-by:
-
Jani Nikula authored
Move sanitize_watermarks() to i9xx_wm.[ch] and rename as ilk_wm_sanitize(). The slightly unfortunate downside is having to expose intel_atomic_check() from intel_display.c, but this declutters intel_display.c nicely. v2: - Move to i9xx_wm.[ch] instead of intel_wm.[ch] (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Stanislav Lisovskiy authored
There was a specific SW workaround requested, which should prevent some watermark issues happening, which requires copying highest enabled wm level to those disabled wm levels(bit 31 is of course still needs to be cleared). This is related to different subsystems like PSR and others, which may still consult a low power wm values ocassionally, despite those are disabled. For that reason we need to keep sane values in correspondent registers, even when those are disabled. HSDES: 22016115093 v2: Remove redundant WA for ICL and extend this WA for all platforms starting from SKL, as it seems that we needed this anyway on all of those(Ville Syrjälä) Signed-off-by:Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by:
-
Chaitanya Kumar Borah authored
A new step of 480MHz has been added on SKUs that have a RPL-U device id to support 120Hz displays more efficiently. Use a new quirk to identify the machine for which this change needs to be applied. v2: (Matt) - Add missing clock steps - Correct reference clock typo v3: - Revert to RPL-U subplatform (Jani) v4: - Remove Bspec reference from code (Jani) Bspec: 55409 Signed-off-by:Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by:
-
Chaitanya Kumar Borah authored
Separate out RPLU device ids and add them to both RPL and newly created RPL-U subplatforms. v2: (Matt) - Sort PCI-IDs numerically - Name the sub-platform to accurately depict what it is for - Make RPL-U part of RPL subplatform v3: revert to RPL-U subplatform (Jani) v4: (Jani) - Add RPL-U ids to RPL-P platform - Remove redundant comment Signed-off-by: -
Ville Syrjälä authored
We defined the bitmasks for DVSTILEOFF but never used them. Remedy that. Signed-off-by:
-
Ville Syrjälä authored
Hiding a function call with side effects inside the variable declaration block is a bit rude. Make it stand out more. Signed-off-by:
-
Ville Syrjälä authored
It's confusing to debug backlight issues when one can't easily even tell what kind of backlight control was selected. Sprinkle uniform debug messages to all the backlight setup functions. Also the one that was already there (ext_pwm) was using drm_info() for some reason. I don't think that's warranted so switch it to drm_dbg_kms() as well. v2: Deal with AUX backlights too (Jani) Move the VLV/CHV initial pipe debug there too (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
- 15 Feb, 2023 8 commits
-
-
Jani Nikula authored
Get rid of the if ladder in intel_modeset_setup_hw_state() and hide a number of functions by adding a .get_hw_state() hook to watermark functions. At least for now, combine the platform specific sanitization to the hw state readouts on the relevant platforms instead of adding a separate hook for that. There's a functional change on PCH split platforms: If i9xx_wm_init() fails to read plane latency and chooses the nop functions, ilk_wm_get_hw_state() won't get called for readout. Add the ilk_init_lp_watermarks() call on that path which now won't be called in .get_hw_state(), as it looks like the only thing that could make a difference. v2: - Add missing static (kernel test robot) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Move the wrappers to call watermark hooks into intel_wm.[ch]. This declutters intel_display.c nicely. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
Add new files intel_wm.[ch] and i9xx_wm.[ch] under display/ to hold generic and pre-SKL watermark code, respectively. SKL+ watermark code has already been split out to skl_watermark.[ch]. Use the _wm.[ch] naming for brevity; we may want to rename skl_watermark.[ch] later accordingly. Add new intel_wm_init() to call either skl_wm_init() or i9xx_wm_init(i915) depending on the platform, the latter comprising of the remains of intel_init_pm(). Sprinkle in some minor checkpatch fixes while moving the code. v2: - Rebase - Fix copyright year Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Jani Nikula authored
The memory frequency detection is a bit spread out here and there. Consolidate to intel_dram.c. v2: - Remove inaccurate comment (Ville) - Call detect_mem_freq() unconditionally (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Imre Deak authored
Detecting in intel_device_info_runtime_init() that the display is fused off or not present should only zero intel_runtime_info::pipe_mask, while the other related masks will be accordingly zeroed later in the function. Remove the redundant zeroing of the related fields on GEN7/8. Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230208114300.3123934-5-imre.deak@intel.com
-
Imre Deak authored
DG1/DG2 and MTL+ has added a new display-present HW flag. Check this flag and if cleared, disable the driver's display functionality. So far the missing check resulted in running the display initialization sequence, and the WARNs below, due to the display register accesses timing out: [ 3.902843] ------------[ cut here ]------------ [ 3.902848] i915 0000:03:00.0: drm_WARN_ON(intel_de_wait_for_set(dev_priv, ((const i915_reg_t){ .reg = (0x42000) }), (1 << (27 - (pg))), 1)) [ 3.902879] WARNING: CPU: 6 PID: 462 at drivers/gpu/drm/i915/display/intel_display_power_well.c:326 gen9_wait_for_power_well_fuses+0x71/0x80 [i915] [ 3.903009] Modules linked in: hid_sensor_hub intel_ishtp_hid i915(+) rtsx_pci_sdmmc drm_buddy mmc_core drm_display_helper crct10dif_pclmul nvme cec crc32_pclmul intel_ish_ipc crc32c_intel ucsi_acpi hid_multitouch nvme_core ghash_clmulni_intel typec_ucsi rtsx_pci ttm sha512_ssse3 serio_raw intel_ishtp typec video i2c_hid_acpi i2c_hid wmi pinctrl_tigerlake ip6_tables ip_tables x_tables fuse [ 3.903021] CPU: 6 PID: 462 Comm: systemd-udevd Tainted: G U 6.2.0-rc6+ #50 [ 3.903023] Hardware name: LENOVO 82VB/LNVNB161216, BIOS KMCN09WW 04/26/2022 [ 3.903023] RIP: 0010:gen9_wait_for_power_well_fuses+0x71/0x80 [i915] [ 3.903105] Code: 48 8b 5f 50 48 85 db 75 03 48 8b 1f e8 98 bb 0d e9 48 c7 c1 00 65 a1 c0 48 89 da 48 c7 c7 4b c5 a3 c0 48 89 c6 e8 e3 df 53 e9 <0f> 0b 5b c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 [ 3.903106] RSP: 0018:ffffa7cec0b07a98 EFLAGS: 00010292 [ 3.903107] RAX: 0000000000000080 RBX: ffff9a05430eaaa0 RCX: 0000000000000000 [ 3.903108] RDX: 0000000000000001 RSI: ffffffffaa7ab69e RDI: 00000000ffffffff [ 3.903108] RBP: ffff9a0552ba2020 R08: ffffffffab062ce0 R09: 00000000abd3ffc2 [ 3.903109] R10: ffffffffffffffff R11: 0000000000000081 R12: 0000000000000000 [ 3.903109] R13: ffff9a05532a9cb0 R14: ffffffffc09e1670 R15: ffff9a0543132000 [ 3.903110] FS: 00007f24d0fe5b40(0000) GS:ffff9a0ccf780000(0000) knlGS:0000000000000000 [ 3.903110] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.903111] CR2: 00005643d7a31a28 CR3: 0000000111614002 CR4: 0000000000770ee0 [ 3.903112] PKRU: 55555554 [ 3.903112] Call Trace: [ 3.903113] <TASK> [ 3.903114] hsw_power_well_enable+0x12f/0x1a0 [i915] [ 3.903191] intel_power_well_enable+0x21/0x70 [i915] [ 3.903265] icl_display_core_init+0x92/0x6a0 [i915] [ 3.903346] intel_power_domains_init_hw+0x1da/0x5b0 [i915] [ 3.903422] intel_modeset_init_noirq+0x60/0x250 [i915] [ 3.903497] i915_driver_probe+0x562/0xe10 [i915] [ 3.903557] ? i915_pci_probe+0x87/0x180 [i915] [ 3.903617] local_pci_probe+0x3e/0x80 [ 3.903621] pci_device_probe+0xb3/0x210 [ 3.903622] really_probe+0xdb/0x380 [ 3.903624] ? pm_runtime_barrier+0x50/0x90 [ 3.903626] __driver_probe_device+0x78/0x170 [ 3.903627] driver_probe_device+0x1f/0x90 [ 3.903628] __driver_attach+0xce/0x1c0 [ 3.903629] ? __pfx___driver_attach+0x10/0x10 [ 3.903630] bus_for_each_dev+0x5f/0x90 [ 3.903631] bus_add_driver+0x1ae/0x200 [ 3.903632] driver_register+0x89/0xe0 [ 3.903634] i915_init+0x1f/0x7f [i915] [ 3.903695] ? __pfx_init_module+0x10/0x10 [i915] [ 3.903751] do_one_initcall+0x43/0x220 [ 3.903753] ? kmalloc_trace+0x26/0x90 [ 3.903756] do_init_module+0x4a/0x200 [ 3.903758] __do_sys_init_module+0x157/0x180 [ 3.903760] do_syscall_64+0x58/0xc0 [ 3.903762] ? do_syscall_64+0x67/0xc0 [ 3.903762] ? exc_page_fault+0x70/0x170 [ 3.903764] entry_SYSCALL_64_after_hwframe+0x72/0xdc Bspec: 49189, 53112 v2: (Jani) - Change "Display fused off" dmesg info to "Display not present". - Zero only runtime->pipe_mask, other fields being zeroed based on this later. - Detect display presence already before the fused-off checks and only for HAS_DISPLAY(). v3: Fix "preset" vs "present" typo. Reported-and-tested-by:iczero <iczero@hellomouse.net> Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8015 Cc: iczero <iczero@hellomouse.net> Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Imre Deak authored
Determining whether the display engine is present on a platform happens only in intel_device_info_runtime_init(). Initializing the display power functionality depends on this condition, so move intel_power_domains_init() later after the runtime init function has been called. The next patch fixing platforms without display, depends on this patch. Acked-by:
-
Imre Deak authored
If fbdev is not initialized for some reason - in practice on platforms without display - suspending fbdev should be skipped during system suspend, fix this up. While at it add an assert that suspending fbdev only happens with the display present. This fixes the following: [ 91.227923] PM: suspend entry (s2idle) [ 91.254598] Filesystems sync: 0.025 seconds [ 91.270518] Freezing user space processes [ 91.272266] Freezing user space processes completed (elapsed 0.001 seconds) [ 91.272686] OOM killer disabled. [ 91.272872] Freezing remaining freezable tasks [ 91.274295] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 91.659622] BUG: kernel NULL pointer dereference, address: 00000000000001c8 [ 91.659981] #PF: supervisor write access in kernel mode [ 91.660252] #PF: error_code(0x0002) - not-present page [ 91.660511] PGD 0 P4D 0 [ 91.660647] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 91.660875] CPU: 4 PID: 917 Comm: bash Not tainted 6.2.0-rc7+ #54 [ 91.661185] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20221117gitfff6d81270b5-9.fc37 unknown [ 91.661680] RIP: 0010:mutex_lock+0x19/0x30 [ 91.661914] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 53 48 89 fb e8 62 d3 ff ff 31 c0 65 48 8b 14 25 00 15 03 00 <f0> 48 0f b1 13 75 06 5b c3 cc cc cc cc 48 89 df 5b eb b4 0f 1f 40 [ 91.662840] RSP: 0018:ffffa1e8011ffc08 EFLAGS: 00010246 [ 91.663087] RAX: 0000000000000000 RBX: 00000000000001c8 RCX: 0000000000000000 [ 91.663440] RDX: ffff8be455eb0000 RSI: 0000000000000001 RDI: 00000000000001c8 [ 91.663802] RBP: ffff8be459440000 R08: ffff8be459441f08 R09: ffffffff8e1432c0 [ 91.664167] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 91.664532] R13: 00000000000001c8 R14: 0000000000000000 R15: ffff8be442f4fb20 [ 91.664905] FS: 00007f28ffc16740(0000) GS:ffff8be4bb900000(0000) knlGS:0000000000000000 [ 91.665334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 91.665626] CR2: 00000000000001c8 CR3: 0000000114926006 CR4: 0000000000770ee0 [ 91.665988] PKRU: 55555554 [ 91.666131] Call Trace: [ 91.666265] <TASK> [ 91.666381] intel_fbdev_set_suspend+0x97/0x1b0 [i915] [ 91.666738] i915_drm_suspend+0xb9/0x100 [i915] [ 91.667029] pci_pm_suspend+0x78/0x170 [ 91.667234] ? __pfx_pci_pm_suspend+0x10/0x10 [ 91.667461] dpm_run_callback+0x47/0x150 [ 91.667673] __device_suspend+0x10a/0x4e0 [ 91.667880] dpm_suspend+0x134/0x270 [ 91.668069] dpm_suspend_start+0x79/0x80 [ 91.668272] suspend_devices_and_enter+0x11b/0x890 [ 91.668526] pm_suspend.cold+0x270/0x2fc [ 91.668737] state_store+0x46/0x90 [ 91.668916] kernfs_fop_write_iter+0x11b/0x200 [ 91.669153] vfs_write+0x1e1/0x3a0 [ 91.669336] ksys_write+0x53/0xd0 [ 91.669510] do_syscall_64+0x58/0xc0 [ 91.669699] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0 [ 91.669980] ? syscall_exit_to_user_mode_prepare+0x18e/0x1c0 [ 91.670278] ? syscall_exit_to_user_mode+0x17/0x40 [ 91.670524] ? do_syscall_64+0x67/0xc0 [ 91.670717] ? __irq_exit_rcu+0x3d/0x140 [ 91.670931] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 91.671202] RIP: 0033:0x7f28ffd14284 v2: CC stable. (Jani) Fixes: f8cc091e ("drm/i915/fbdev: suspend HPD before fbdev unregistration") References: https://gitlab.freedesktop.org/drm/intel/-/issues/8015Reported-and-tested-by:
-
- 14 Feb, 2023 4 commits
-
-
Ville Syrjälä authored
Since we now populate encoder->devdata for all DP capable platforms we can consult it directly during the eDP connector init instead of taking a detour via some global list/array. Unfortunately we can't quite get rid of intel_dp_is_port_edp() since it's still used by the higher level ilk/vlv/chv output setup code. Signed-off-by:
-
Ville Syrjälä authored
Instead of consulting vbt.ports[] lets just go through the whole child device list to check whether a specific port was declared by the VBT or not. Note that this doesn't change anything wrt. detecting duplicate child devices with the same port as vbt.ports[] would also always contain exactly one of the duplicates. v2: Include a is_port_valid() check to deal with some broken VBTs Mention something about duplicate port detection (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: -
Ville Syrjälä authored
Currently intel_bios_port_aux_ch() digs out the devdata (VBT child device info) from the vbt.ports[] array. We need to get rid of that, so just pass in the correct encoder->devdata (now that we have it also for g4x+ ports) directly. Signed-off-by:
-
Ville Syrjälä authored
Let's make encoder->devdata (the VBT information for the port) available on g4x+ platforms as well. Much easier when you can just grab it there instead of trying to find it from some global list array based on the port. Note that (unlike DDI platforms) we don't currently require that each DP/HDMI port is actually declared in VBT. Perhaps in the future we may want to rethink that, but for now just stick in a debug+FIXME as a reminder. Signed-off-by:
-
