- 22 Jul, 2018 31 commits
-
-
Tetsuo Handa authored
commit 3bc53be9 upstream. syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is because nfc_llcp_send_ui_frame() is retrying the loop without any delay when nonblocking nfc_alloc_send_skb() returned NULL. Since there is no need to use MSG_DONTWAIT if we retry until sock_alloc_send_pskb() succeeds, let's use blocking call. Also, in case an unexpected error occurred, let's break the loop if blocking nfc_alloc_send_skb() failed. [1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+d29d18215e477cfbfbdd@syzkaller.appspotmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Santosh Shilimkar authored
commit f1693c63 upstream. Loop transport which is self loopback, remote port congestion update isn't relevant. Infact the xmit path already ignores it. Receive path needs to do the same. Reported-by: syzbot+4c20b3866171ce8441d2@syzkaller.appspotmail.com Reviewed-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Eric Biggers authored
commit c604cb76 upstream. My recent fix for dns_resolver_preparse() printing very long strings was incomplete, as shown by syzbot which still managed to hit the WARN_ONCE() in set_precision() by adding a crafted "dns_resolver" key: precision 50001 too large WARNING: CPU: 7 PID: 864 at lib/vsprintf.c:2164 vsnprintf+0x48a/0x5a0 The bug this time isn't just a printing bug, but also a logical error when multiple options ("#"-separated strings) are given in the key payload. Specifically, when separating an option string into name and value, if there is no value then the name is incorrectly considered to end at the end of the key payload, rather than the end of the current option. This bypasses validation of the option length, and also means that specifying multiple options is broken -- which presumably has gone unnoticed as there is currently only one valid option anyway. A similar problem also applied to option values, as the kstrtoul() when parsing the "dnserror" option will read past the end of the current option and into the next option. Fix these bugs by correctly computing the length of the option name and by copying the option value, null-terminated, into a temporary buffer. Reproducer for the WARN_ONCE() that syzbot hit: perl -e 'print "#A#", "\0" x 50000' | keyctl padd dns_resolver desc @s Reproducer for "dnserror" option being parsed incorrectly (expected behavior is to fail when seeing the unknown option "foo", actual behavior was to read the dnserror value as "1#foo" and fail there): perl -e 'print "#dnserror=1#foo\0"' | keyctl padd dns_resolver desc @s Reported-by:
syzbot <syzkaller@googlegroups.com> Fixes: 4a2d7892 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Florian Westphal authored
commit 11ff7288 upstream. the ebtables evaluation loop expects targets to return positive values (jumps), or negative values (absolute verdicts). This is completely different from what xtables does. In xtables, targets are expected to return the standard netfilter verdicts, i.e. NF_DROP, NF_ACCEPT, etc. ebtables will consider these as jumps. Therefore reject any target found due to unspec fallback. v2: also reject watchers. ebtables ignores their return value, so a target that assumes skb ownership (and returns NF_STOLEN) causes use-after-free. The only watchers in the 'ebtables' front-end are log and nflog; both have AF_BRIDGE specific wrappers on kernel side. Reported-by: syzbot+2b43f681169a2a0d306a@syzkaller.appspotmail.com Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Paul Burton authored
commit b63e132b upstream. The current MIPS implementation of arch_trigger_cpumask_backtrace() is broken because it attempts to use synchronous IPIs despite the fact that it may be run with interrupts disabled. This means that when arch_trigger_cpumask_backtrace() is invoked, for example by the RCU CPU stall watchdog, we may: - Deadlock due to use of synchronous IPIs with interrupts disabled, causing the CPU that's attempting to generate the backtrace output to hang itself. - Not succeed in generating the desired output from remote CPUs. - Produce warnings about this from smp_call_function_many(), for example: [42760.526910] INFO: rcu_sched detected stalls on CPUs/tasks: [42760.535755] 0-...!: (1 GPs behind) idle=ade/140000000000000/0 softirq=526944/526945 fqs=0 [42760.547874] 1-...!: (0 ticks this GP) idle=e4a/140000000000000/0 softirq=547885/547885 fqs=0 [42760.559869] (detected by 2, t=2162 jiffies, g=266689, c=266688, q=33) [42760.568927] ------------[ cut here ]------------ [42760.576146] WARNING: CPU: 2 PID: 1216 at kernel/smp.c:416 smp_call_function_many+0x88/0x20c [42760.587839] Modules linked in: [42760.593152] CPU: 2 PID: 1216 Comm: sh Not tainted 4.15.4-00373-gee058bb4d0c2 #2 [42760.603767] Stack : 8e09bd20 8e09bd20 8e09bd20 fffffff0 00000007 00000006 00000000 8e09bca8 [42760.616937] 95b2b379 95b2b379 807a0080 00000007 81944518 0000018a 00000032 00000000 [42760.630095] 00000000 00000030 80000000 00000000 806eca74 00000009 8017e2b8 000001a0 [42760.643169] 00000000 00000002 00000000 8e09baa4 00000008 808b8008 86d69080 8e09bca0 [42760.656282] 8e09ad50 805e20aa 00000000 00000000 00000000 8017e2b8 00000009 801070ca [42760.669424] ... [42760.673919] Call Trace: [42760.678672] [<27fde568>] show_stack+0x70/0xf0 [42760.685417] [<84751641>] dump_stack+0xaa/0xd0 [42760.692188] [<699d671c>] __warn+0x80/0x92 [42760.698549] [<68915d41>] warn_slowpath_null+0x28/0x36 [42760.705912] [<f7c76c1c>] smp_call_function_many+0x88/0x20c [42760.713696] [<6bbdfc2a>] arch_trigger_cpumask_backtrace+0x30/0x4a [42760.722216] [<f845bd33>] rcu_dump_cpu_stacks+0x6a/0x98 [42760.729580] [<796e7629>] rcu_check_callbacks+0x672/0x6ac [42760.737476] [<059b3b43>] update_process_times+0x18/0x34 [42760.744981] [<6eb94941>] tick_sched_handle.isra.5+0x26/0x38 [42760.752793] [<478d3d70>] tick_sched_timer+0x1c/0x50 [42760.759882] [<e56ea39f>] __hrtimer_run_queues+0xc6/0x226 [42760.767418] [<e88bbcae>] hrtimer_interrupt+0x88/0x19a [42760.775031] [<6765a19e>] gic_compare_interrupt+0x2e/0x3a [42760.782761] [<0558bf5f>] handle_percpu_devid_irq+0x78/0x168 [42760.790795] [<90c11ba2>] generic_handle_irq+0x1e/0x2c [42760.798117] [<1b6d462c>] gic_handle_local_int+0x38/0x86 [42760.805545] [<b2ada1c7>] gic_irq_dispatch+0xa/0x14 [42760.812534] [<90c11ba2>] generic_handle_irq+0x1e/0x2c [42760.820086] [<c7521934>] do_IRQ+0x16/0x20 [42760.826274] [<9aef3ce6>] plat_irq_dispatch+0x62/0x94 [42760.833458] [<6a94b53c>] except_vec_vi_end+0x70/0x78 [42760.840655] [<22284043>] smp_call_function_many+0x1ba/0x20c [42760.848501] [<54022b58>] smp_call_function+0x1e/0x2c [42760.855693] [<ab9fc705>] flush_tlb_mm+0x2a/0x98 [42760.862730] [<0844cdd0>] tlb_flush_mmu+0x1c/0x44 [42760.869628] [<cb259b74>] arch_tlb_finish_mmu+0x26/0x3e [42760.877021] [<1aeaaf74>] tlb_finish_mmu+0x18/0x66 [42760.883907] [<b3fce717>] exit_mmap+0x76/0xea [42760.890428] [<c4c8a2f6>] mmput+0x80/0x11a [42760.896632] [<a41a08f4>] do_exit+0x1f4/0x80c [42760.903158] [<ee01cef6>] do_group_exit+0x20/0x7e [42760.909990] [<13fa8d54>] __wake_up_parent+0x0/0x1e [42760.917045] [<46cf89d0>] smp_call_function_many+0x1a2/0x20c [42760.924893] [<8c21a93b>] syscall_common+0x14/0x1c [42760.931765] ---[ end trace 02aa09da9dc52a60 ]--- [42760.938342] ------------[ cut here ]------------ [42760.945311] WARNING: CPU: 2 PID: 1216 at kernel/smp.c:291 smp_call_function_single+0xee/0xf8 ... This patch switches MIPS' arch_trigger_cpumask_backtrace() to use async IPIs & smp_call_function_single_async() in order to resolve this problem. We ensure use of the pre-allocated call_single_data_t structures is serialized by maintaining a cpumask indicating that they're busy, and refusing to attempt to send an IPI when a CPU's bit is set in this mask. This should only happen if a CPU hasn't responded to a previous backtrace IPI - ie. if it's hung - and we print a warning to the console in this case. I've marked this for stable branches as far back as v4.9, to which it applies cleanly. Strictly speaking the faulty MIPS implementation can be traced further back to commit 856839b7 ("MIPS: Add arch_trigger_all_cpu_backtrace() function") in v3.19, but kernel versions v3.19 through v4.8 will require further work to backport due to the rework performed in commit 9a01c3ed ("nmi_backtrace: add more trigger_*_cpu_backtrace() methods"). Signed-off-by:
Paul Burton <paul.burton@mips.com> Patchwork: https://patchwork.linux-mips.org/patch/19597/ Cc: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org # v4.9+ Fixes: 856839b7 ("MIPS: Add arch_trigger_all_cpu_backtrace() function") Fixes: 9a01c3ed ("nmi_backtrace: add more trigger_*_cpu_backtrace() methods") [ Huacai: backported to 4.4: Restruction since generic NMI solution is unavailable ] Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
-
Paul Burton authored
commit 5a267832 upstream. The generic nmi_cpu_backtrace() function calls show_regs() when a struct pt_regs is available, and dump_stack() otherwise. If we were to make use of the generic nmi_cpu_backtrace() with MIPS' current implementation of show_regs() this would mean that we see only register data with no accompanying stack information, in contrast with our current implementation which calls dump_stack() regardless of whether register state is available. In preparation for making use of the generic nmi_cpu_backtrace() to implement arch_trigger_cpumask_backtrace(), have our implementation of show_regs() call dump_stack() and drop the explicit dump_stack() call in arch_dump_stack() which is invoked by arch_trigger_cpumask_backtrace(). This will allow the output we produce to remain the same after a later patch switches to using nmi_cpu_backtrace(). It may mean that we produce extra stack output in other uses of show_regs(), but this: 1) Seems harmless. 2) Is good for consistency between arch_trigger_cpumask_backtrace() and other users of show_regs(). 3) Matches the behaviour of the ARM & PowerPC architectures. Marked for stable back to v4.9 as a prerequisite of the following patch "MIPS: Call dump_stack() from show_regs()". Signed-off-by:
-
Ping-Ke Shih authored
commit 9a98302d upstream. Without this patch, firmware will not run properly on rtl8821ae, and it causes bad user experience. For example, bad connection performance with low rate, higher power consumption, and so on. rtl8821ae uses two kinds of firmwares for normal and WoWlan cases, and each firmware has firmware data buffer and size individually. Original code always overwrite size of normal firmware rtlpriv->rtlhal.fwsize, and this mismatch causes firmware checksum error, then firmware can't start. In this situation, driver gives message "Firmware is not ready to run!". Fixes: fe89707f ("rtlwifi: rtl8821ae: Simplify loading of WOWLAN firmware") Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Cc: Stable <stable@vger.kernel.org> # 4.0+ Reviewed-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 676bcfec upstream. t.qset_idx can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c:2286 cxgb_extension_ioctl() warn: potential spectre issue 'adapter->msix_info' Fix this by sanitizing t.qset_idx before using it to index adapter->msix_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Alex Vesker authored
[ Upstream commit d412c31d ] The command interface can work in two modes: Events and Polling. In the general case, each time we invoke a command, a work is queued to handle it. When working in events, the interrupt handler completes the command execution. On the other hand, when working in polling mode, the work itself completes it. Due to a bug in the work handler, a command could have been completed by the interrupt handler, while the work handler hasn't finished yet, causing the it to complete once again if the command interface mode was changed from Events to polling after the interrupt handler was called. mlx5_unload_one() mlx5_stop_eqs() // Destroy the EQ before cmd EQ ...cmd_work_handler() write_doorbell() --> EVENT_TYPE_CMD mlx5_cmd_comp_handler() // First free free_ent(cmd, ent->idx) complete(&ent->done) <-- mlx5_stop_eqs //cmd was complete // move to polling before destroying the last cmd EQ mlx5_cmd_use_polling() cmd->mode = POLL; --> cmd_work_handler (continues) if (cmd->mode == POLL) mlx5_cmd_comp_handler() // Double free The solution is to store the cmd->mode before writing the doorbell. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Konstantin Khlebnikov authored
[ Upstream commit 7e85dc8c ] When blackhole is used on top of classful qdisc like hfsc it breaks qlen and backlog counters because packets are disappear without notice. In HFSC non-zero qlen while all classes are inactive triggers warning: WARNING: ... at net/sched/sch_hfsc.c:1393 hfsc_dequeue+0xba4/0xe90 [sch_hfsc] and schedules watchdog work endlessly. This patch return __NET_XMIT_BYPASS in addition to NET_XMIT_SUCCESS, this flag tells upper layer: this packet is gone and isn't queued. Signed-off-by:
Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Jason Wang authored
[ Upstream commit b8f1f658 ] Sock will be NULL if we pass -1 to vhost_net_set_backend(), but when we meet errors during ubuf allocation, the code does not check for NULL before calling sockfd_put(), this will lead NULL dereferencing. Fixing by checking sock pointer before. Fixes: bab632d6 ("vhost: vhost TX zero-copy support") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Ilpo Järvinen authored
[ Upstream commit 1236f22f ] If SACK is not enabled and the first cumulative ACK after the RTO retransmission covers more than the retransmitted skb, a spurious FRTO undo will trigger (assuming FRTO is enabled for that RTO). The reason is that any non-retransmitted segment acknowledged will set FLAG_ORIG_SACK_ACKED in tcp_clean_rtx_queue even if there is no indication that it would have been delivered for real (the scoreboard is not kept with TCPCB_SACKED_ACKED bits in the non-SACK case so the check for that bit won't help like it does with SACK). Having FLAG_ORIG_SACK_ACKED set results in the spurious FRTO undo in tcp_process_loss. We need to use more strict condition for non-SACK case and check that none of the cumulatively ACKed segments were retransmitted to prove that progress is due to original transmissions. Only then keep FLAG_ORIG_SACK_ACKED set, allowing FRTO undo to proceed in non-SACK case. (FLAG_ORIG_SACK_ACKED is planned to be renamed to FLAG_ORIG_PROGRESS to better indicate its purpose but to keep this change minimal, it will be done in another patch). Besides burstiness and congestion control violations, this problem can result in RTO loop: When the loss recovery is prematurely undoed, only new data will be transmitted (if available) and the next retransmission can occur only after a new RTO which in case of multiple losses (that are not for consecutive packets) requires one RTO per loss to recover. Signed-off-by:
Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Tested-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
-
Yuchung Cheng authored
[ Upstream commit c860e997 ] Fast Open key could be stored in different endian based on the CPU. Previously hosts in different endianness in a server farm using the same key config (sysctl value) would produce different cookies. This patch fixes it by always storing it as little endian to keep same API for LE hosts. Reported-by:
Daniele Iamartino <danielei@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jiri Slaby authored
[ Upstream commit 0ee1f473 ] When unplugging an r8152 adapter while the interface is UP, the NIC becomes unusable. usb->disconnect (aka rtl8152_disconnect) deletes napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to napi_disable, but the napi is already deleted by disconnect above. So the first while loop in napi_disable never finishes. This results in complete deadlock of the network layer as there is rtnl_mutex held by unregister_netdev. So avoid the call to napi_disable in rtl8152_close when the device is already gone. The other calls to usb_kill_urb, cancel_delayed_work_sync, netif_stop_queue etc. seem to be fine. The urb and netdev is not destroyed yet. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: linux-usb@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by:
-
Sudarsana Reddy Kalluru authored
[ Upstream commit bb7858ba ] Memory size is limited in the kdump kernel environment. Allocation of more msix-vectors (or queues) consumes few tens of MBs of memory, which might lead to the kdump kernel failure. This patch adds changes to limit the number of MSI-X vectors in kdump kernel to minimum required value (i.e., 2 per engine). Fixes: fe56b9e6 ("qed: Add module with basic common support") Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 12b03558 ] After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), sungem owners reported the infamous "eth0: hw csum failure" message. CHECKSUM_COMPLETE has in fact never worked for this driver, but this was masked by the fact that upper stacks had to strip the FCS, and therefore skb->ip_summed was set back to CHECKSUM_NONE before my recent change. Driver configures a number of bytes to skip when the chip computes the checksum, and for some reason only half of the Ethernet header was skipped. Then a second problem is that we should strip the FCS by default, unless the driver is updated to eventually support NETIF_F_RXFCS in the future. Finally, a driver should check if NETIF_F_RXCSUM feature is enabled or not, so that the admin can turn off rx checksum if wanted. Many thanks to Andreas Schwab and Mathieu Malaterre for their help in debugging this issue. Signed-off-by:
Meelis Roos <mroos@linux.ee> Reported-by:
Mathieu Malaterre <malat@debian.org> Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Tested-by:
-
Alex Vesker authored
[ Upstream commit 603b7bcf ] The NULL character was not set correctly for the string containing the command length, this caused failures reading the output of the command due to a random length. The fix is to initialize the output length string. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 0ce4e70f ] To compute delays, better not use time of the day which can be changed by admins or malicious programs. Also change ccid3_first_li() to use s64 type for delta variable to avoid potential overflows. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 74174fe5 ] On fast hosts or malicious bots, we trigger a DCCP_BUG() which seems excessive. syzbot reported : BUG: delta (-6195) <= 0 at net/dccp/ccids/ccid3.c:628/ccid3_hc_rx_send_feedback() CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.18.0-rc1+ #112 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 ccid3_hc_rx_send_feedback net/dccp/ccids/ccid3.c:628 [inline] ccid3_hc_rx_packet_recv.cold.16+0x38/0x71 net/dccp/ccids/ccid3.c:793 ccid_hc_rx_packet_recv net/dccp/ccid.h:185 [inline] dccp_deliver_input_to_ccids+0xf0/0x280 net/dccp/input.c:180 dccp_rcv_established+0x87/0xb0 net/dccp/input.c:378 dccp_v4_do_rcv+0x153/0x180 net/dccp/ipv4.c:654 sk_backlog_rcv include/net/sock.h:914 [inline] __sk_receive_skb+0x3ba/0xd80 net/core/sock.c:517 dccp_v4_rcv+0x10f9/0x1f58 net/dccp/ipv4.c:875 ip_local_deliver_finish+0x2eb/0xda0 net/ipv4/ip_input.c:215 NF_HOOK include/linux/netfilter.h:287 [inline] ip_local_deliver+0x1e9/0x750 net/ipv4/ip_input.c:256 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x823/0x2220 net/ipv4/ip_input.c:396 NF_HOOK include/linux/netfilter.h:287 [inline] ip_rcv+0xa18/0x1284 net/ipv4/ip_input.c:492 __netif_receive_skb_core+0x2488/0x3680 net/core/dev.c:4628 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4693 process_backlog+0x219/0x760 net/core/dev.c:5373 napi_poll net/core/dev.c:5771 [inline] net_rx_action+0x7da/0x1980 net/core/dev.c:5837 __do_softirq+0x2e8/0xb17 kernel/softirq.c:284 run_ksoftirqd+0x86/0x100 kernel/softirq.c:645 smpboot_thread_fn+0x417/0x870 kernel/smpboot.c:164 kthread+0x345/0x410 kernel/kthread.c:240 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412 Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit ced9e191 ] pool can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/atm/zatm.c:1491 zatm_ioctl() warn: potential spectre issue 'zatm_dev->pool_info' (local cap) Fix this by sanitizing pool before using it to index zatm_dev->pool_info Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2Signed-off-by:
-
Christian Lamparter authored
commit 5d59ad6e upstream. If one of the later memory allocations in rypto4xx_build_pdr() fails: dev->pdr (and/or) dev->pdr_uinfo wouldn't be freed. crypto4xx_build_sdr() has the same issue with dev->sdr. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Christian Lamparter authored
commit a728a196 upstream. alg entries are only added to the list, after the registration was successful. If the registration failed, it was never added to the list in the first place. Signed-off-by:
-
Jonas Gorski authored
commit d6213c1f upstream. The DMA controller regs actually point to DMA channel 0, so the write to ENETDMA_CFG_REG will actually modify a random DMA channel. Since DMA controller registers do not exist on BCM6345, guard the write with the usual check for dma_has_sram. Signed-off-by:
Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by:
-
Jonas Gorski authored
commit 9c86b846 upstream. Check the return code of prepare_enable and change one last instance of enable only to prepare_enable. Also properly disable and release the clock in error paths and on remove for enetsw. Signed-off-by:
-
alex chen authored
commit 853bc26a upstream. The subsystem.su_mutex is required while accessing the item->ci_parent, otherwise, NULL pointer dereference to the item->ci_parent will be triggered in the following situation: add node delete node sys_write vfs_write configfs_write_file o2nm_node_store o2nm_node_local_write do_rmdir vfs_rmdir configfs_rmdir mutex_lock(&subsys->su_mutex); unlink_obj item->ci_group = NULL; item->ci_parent = NULL; to_o2nm_cluster_from_node node->nd_item.ci_parent->ci_parent BUG since of NULL pointer dereference to nd_item.ci_parent Moreover, the o2nm_cluster also should be protected by the subsystem.su_mutex. [alex.chen@huawei.com: v2] Link: http://lkml.kernel.org/r/59EEAA69.9080703@huawei.com Link: http://lkml.kernel.org/r/59E9B36A.10700@huawei.comSigned-off-by:
Alex Chen <alex.chen@huawei.com> Reviewed-by:
Jun Piao <piaojun@huawei.com> Reviewed-by:
Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Salvatore Bonaccorso <carnil@debian.org> Signed-off-by:
-
David S. Miller authored
commit f4eb17e1 upstream. This reverts commit b699d003. As per Eric Dumazet, the pskb_may_pull() is a NOP in this particular case, so the 'iph' reload is unnecessary. Signed-off-by:
-
H. Peter Anvin authored
commit 0e2e1600 upstream. i386 and x86-64 uses different registers for arguments; make them available so we don't have to #ifdef in the actual code. Native size and specified size (q, l, w, b) versions are provided. Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Sedat Dilek <sedat.dilek@gmail.com> Acked-by:
Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@redhat.com Cc: akataria@vmware.com Cc: akpm@linux-foundation.org Cc: andrea.parri@amarulasolutions.com Cc: ard.biesheuvel@linaro.org Cc: arnd@arndb.de Cc: aryabinin@virtuozzo.com Cc: astrachan@google.com Cc: boris.ostrovsky@oracle.com Cc: brijesh.singh@amd.com Cc: caoj.fnst@cn.fujitsu.com Cc: geert@linux-m68k.org Cc: ghackmann@google.com Cc: gregkh@linuxfoundation.org Cc: jan.kiszka@siemens.com Cc: jarkko.sakkinen@linux.intel.com Cc: joe@perches.com Cc: jpoimboe@redhat.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: kstewart@linuxfoundation.org Cc: linux-efi@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Cc: manojgupta@google.com Cc: mawilcox@microsoft.com Cc: michal.lkml@markovi.net Cc: mjg59@google.com Cc: mka@chromium.org Cc: pombredanne@nexb.com Cc: rientjes@google.com Cc: rostedt@goodmis.org Cc: thomas.lendacky@amd.com Cc: tstellar@redhat.com Cc: tweek@google.com Cc: virtualization@lists.linux-foundation.org Cc: will.deacon@arm.com Cc: yamada.masahiro@socionext.com Link: http://lkml.kernel.org/r/20180621162324.36656-3-ndesaulniers@google.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Nick Desaulniers authored
commit d03db2bc upstream. Functions marked extern inline do not emit an externally visible function when the gnu89 C standard is used. Some KBUILD Makefiles overwrite KBUILD_CFLAGS. This is an issue for GCC 5.1+ users as without an explicit C standard specified, the default is gnu11. Since c99, the semantics of extern inline have changed such that an externally visible function is always emitted. This can lead to multiple definition errors of extern inline functions at link time of compilation units whose build files have removed an explicit C standard compiler flag for users of GCC 5.1+ or Clang. Suggested-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
H. Peter Anvin <hpa@zytor.com> Suggested-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
David Rientjes authored
commit 9a04dbcf upstream. The motivation for commit abb2ea7d ("compiler, clang: suppress warning for unused static inline functions") was to suppress clang's warnings about unused static inline functions. For configs without CONFIG_OPTIMIZE_INLINING enabled, such as any non-x86 architecture, `inline' in the kernel implies that __attribute__((always_inline)) is used. Some code depends on that behavior, see https://lkml.org/lkml/2017/6/13/918: net/built-in.o: In function `__xchg_mb': arch/arm64/include/asm/cmpxchg.h:99: undefined reference to `__compiletime_assert_99' arch/arm64/include/asm/cmpxchg.h:99: undefined reference to `__compiletime_assert_99 The full fix would be to identify these breakages and annotate the functions with __always_inline instead of `inline'. But since we are late in the 4.12-rc cycle, simply carry forward the forced inlining behavior and work toward moving arm64, and other architectures, toward CONFIG_OPTIMIZE_INLINING behavior. Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706261552200.1075@chino.kir.corp.google.comSigned-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Sodagudi Prasad <psodagud@codeaurora.org> Tested-by:
Matthias Kaehlcke <mka@chromium.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Linus Torvalds authored
commit 6d53cefb upstream. Commit abb2ea7d ("compiler, clang: suppress warning for unused static inline functions") just caused more warnings due to re-defining the 'inline' macro. So undef it before re-defining it, and also add the 'notrace' attribute like the gcc version that this is overriding does. Maybe this makes clang happier. Signed-off-by:
-
David Rientjes authored
commit abb2ea7d upstream. GCC explicitly does not warn for unused static inline functions for -Wunused-function. The manual states: Warn whenever a static function is declared but not defined or a non-inline static function is unused. Clang does warn for static inline functions that are unused. It turns out that suppressing the warnings avoids potentially complex #ifdef directives, which also reduces LOC. Suppress the warning for clang. Signed-off-by:
-
- 19 Jul, 2018 4 commits
-
-
Greg Kroah-Hartman authored
-
Arnaldo Carvalho de Melo authored
commit cec07f53 upstream. And remove the empty tools/arch/x86/include/asm/unistd_{32,64}.h files introduced by eae7a755 ("perf tools, x86: Build perf on older user-space as well"). This way we get closer to mirroring the kernel for cases where __NR_ can't be found for some include path/_GNU_SOURCE/whatever scenario. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-kpj6m3mbjw82kg6krk2z529e@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
Andy Lutomirski authored
commit 3df8d920 upstream. A typo (or mis-merge?) resulted in leaf 6 only being probed if cpuid_level >= 7. Fixes: 2ccd71f1 ("x86/cpufeature: Move some of the scattered feature bits to x86_capability") Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Link: http://lkml.kernel.org/r/6ea30c0e9daec21e488b54761881a6dfcf3e04d0.1481825597.git.luto@kernel.orgSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by:
-
Rasmus Villemoes authored
commit 9564a8cf upstream. I tried building using a freshly built Make (4.2.1-69-g8a731d1), but already the objtool build broke with orc_dump.c: In function ‘orc_dump’: orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations] if (elf_getshdrnum(elf, &nr_sections)) { Turns out that with that new Make, the backslash was not removed, so cpp didn't see a #include directive, grep found nothing, and -DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS. Now, that new Make behaviour is documented in their NEWS file: * WARNING: Backward-incompatibility! Number signs (#) appearing inside a macro reference or function invocation no longer introduce comments and should not be escaped with backslashes: thus a call such as: foo := $(shell echo '#') is legal. Previously the number sign needed to be escaped, for example: foo := $(shell echo '\#') Now this latter will resolve to "\#". If you want to write makefiles portable to both versions, assign the number sign to a variable: C := \# foo := $(shell echo '$C') This was claimed to be fixed in 3.81, but wasn't, for some reason. To detect this change search for 'nocomment' in the .FEATURES variable. This also fixes up the two make-cmd instances to replace # with $(pound) rather than with \#. There might very well be other places that need similar fixup in preparation for whatever future Make release contains the above change, but at least this builds an x86_64 defconfig with the new make. Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847 Cc: Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by:
-
- 17 Jul, 2018 5 commits
-
-
Greg Kroah-Hartman authored
-
Tetsuo Handa authored
commit d3349b6b upstream. syzbot is hitting WARN() triggered by memory allocation fault injection [1] because loop module is calling sysfs_remove_group() when sysfs_create_group() failed. Fix this by remembering whether sysfs_create_group() succeeded. [1] https://syzkaller.appspot.com/bug?id=3f86c0edf75c86d2633aeb9dd69eccc70bc7e90bSigned-off-by:
syzbot <syzbot+9f03168400f56df89dbc6f1751f4458fe739ff29@syzkaller.appspotmail.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Leon Romanovsky authored
commit 7a8690ed upstream. In commit 357d23c811a7 ("Remove the obsolete libibcm library") in rdma-core [1], we removed obsolete library which used the /dev/infiniband/ucmX interface. Following multiple syzkaller reports about non-sanitized user input in the UCMA module, the short audit reveals the same issues in UCM module too. It is better to disable this interface in the kernel, before syzkaller team invests time and energy to harden this unused interface. [1] https://github.com/linux-rdma/rdma-core/pull/279Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Tetsuo Handa authored
commit fc14eebf upstream. syzbot is reporting NULL pointer dereference at snapshot_write() [1]. This is because data->handle is zero-cleared by ioctl(SNAPSHOT_FREE). Fix this by checking data_of(data->handle) != NULL before using it. [1] https://syzkaller.appspot.com/bug?id=828a3c71bd344a6de8b6a31233d51a72099f27fdSigned-off-by:
syzbot <syzbot+ae590932da6e45d6564d@syzkaller.appspotmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Theodore Ts'o authored
commit d2ac838e upstream. Refactor the validation code used in LOOP_SET_FD so it is also used in LOOP_CHANGE_FD. Otherwise it is possible to construct a set of loop devices that all refer to each other. This can lead to a infinite loop in starting with "while (is_loop_device(f)) .." in loop_set_fd(). Fix this by refactoring out the validation code and using it for LOOP_CHANGE_FD as well as LOOP_SET_FD. Reported-by: syzbot+4349872271ece473a7c91190b68b4bac7c5dbc87@syzkaller.appspotmail.com Reported-by: syzbot+40bd32c4d9a3cc12a339@syzkaller.appspotmail.com Reported-by: syzbot+769c54e66f994b041be7@syzkaller.appspotmail.com Reported-by: syzbot+0a89a9ce473936c57065@syzkaller.appspotmail.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
