- 31 May, 2019 40 commits
-
-
Arnd Bergmann authored
[ Upstream commit e91012ee ] clang points out that the declaration of cio_irb does not match the definition exactly, it is missing the alignment attribute: ../drivers/s390/cio/cio.c:50:1: warning: section does not match previous declaration [-Wsection] DEFINE_PER_CPU_ALIGNED(struct irb, cio_irb); ^ ../include/linux/percpu-defs.h:150:2: note: expanded from macro 'DEFINE_PER_CPU_ALIGNED' DEFINE_PER_CPU_SECTION(type, name, PER_CPU_ALIGNED_SECTION) \ ^ ../include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name; \ ^ ../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ ../drivers/s390/cio/cio.h:118:1: note: previous attribute is here DECLARE_PER_CPU(struct irb, cio_irb); ^ ../include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU' DECLARE_PER_CPU_SECTION(type, name, "") ^ ../include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name ^ ../include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ Use DECLARE_PER_CPU_ALIGNED() here, to make the two match. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Sebastian Ott <sebott@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Thomas Huth authored
[ Upstream commit 81a8f2be ] If CONFIG_PGSTE is not set (e.g. when compiling without KVM), GCC complains: CC arch/s390/mm/pgtable.o arch/s390/mm/pgtable.c:413:15: warning: ‘pmd_alloc_map’ defined but not used [-Wunused-function] static pmd_t *pmd_alloc_map(struct mm_struct *mm, unsigned long addr) ^~~~~~~~~~~~~ Wrap the function with "#ifdef CONFIG_PGSTE" to silence the warning. Signed-off-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[ Upstream commit 2aa632c5 ] The brace initialization used here generates warnings on some compilers. For example, on GCC 4.9: [...] In function ‘dm_determine_update_type_for_commit’: [...] error: missing braces around initializer [-Werror=missing-braces] struct dc_stream_update stream_update = { 0 }; ^ Use memset to make this more portable. v2: Specify the compiler / diagnostic in the commit message (Paul) Cc: Sun peng Li <Sunpeng.Li@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit 24613a04 ] Commit 2613f36e ("x86/microcode: Attempt late loading only when new microcode is present") added the new define UCODE_NEW to denote that an update should happen only when newer microcode (than installed on the system) has been found. But it missed adjusting that for the old /dev/cpu/microcode loading interface. Fix it. Fixes: 2613f36e ("x86/microcode: Attempt late loading only when new microcode is present") Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Jann Horn <jannh@google.com> Link: https://lkml.kernel.org/r/20190405133010.24249-3-bp@alien8.deSigned-off-by:
-
Arnd Bergmann authored
[ Upstream commit 913140e2 ] The 'func_code' variable gets printed in debug statements without a prior initialization in multiple functions, as reported when building with clang: drivers/s390/crypto/zcrypt_api.c:659:6: warning: variable 'func_code' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] if (mex->outputdatalength < mex->inputdatalength) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:725:29: note: uninitialized use occurs here trace_s390_zcrypt_rep(mex, func_code, rc, ^~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:659:2: note: remove the 'if' if its condition is always false if (mex->outputdatalength < mex->inputdatalength) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/s390/crypto/zcrypt_api.c:654:24: note: initialize the variable 'func_code' to silence this warning unsigned int func_code; ^ Add initializations to all affected code paths to shut up the warning and make the warning output consistent. Signed-off-by:
-
Michael Tretter authored
[ Upstream commit c06e6440 ] The firmware sets BIT(13) in clkflag to mark a divider as fractional divider. The clock driver copies the clkflag straight to the flags of the common clock framework. In the common clk framework flags, BIT(13) is defined as CLK_DUTY_CYCLE_PARENT. Add a new field to the zynqmp_clk_divider to specify if a divider is a fractional devider. Set this field based on the clkflag when registering a divider. At the same time, unset BIT(13) from clkflag when copying the flags to the common clk framework flags. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit dfe7fb21 ] Most rk3288-based boards are derived from the EVB and thus use a PWM regulator for the logic rail. However, most rk3288-based boards don't specify the PWM regulator in their device tree. We'll deal with that by making it critical. NOTE: it's important to make it critical and not just IGNORE_UNUSED because all PWMs in the system share the same clock. We don't want another PWM user to turn the clock on and off and kill the logic rail. This change is in preparation for actually having the PWMs in the rk3288 device tree actually point to the proper PWM clock. Up until now they've all pointed to the clock for the old IP block and they've all worked due to the fact that rkpwm was IGNORE_UNUSED and that the clock rates for both clocks were the same. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 00053de5 ] Microphone detection provides the button detection features on the Arizona CODECs as such it will be running if the jack is currently inserted. If the driver is unbound whilst the jack is still inserted this will cause warnings from the regulator framework as the MICVDD regulator is put but was never disabled. Correct this by disabling microphone detection on driver removal and if the microphone detection was running disable the regulator and put the runtime reference that was currently held. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 00c0cd9e ] It appears that there is a typo in the rk3288 TRM. For GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's the other way around. How do I know? Here's my evidence: 1. Prior to commit 4d3e84f9 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") we always pretended that we were using "aclk_vdpu" and the comment in the code said that this matched the default setting in the system. In fact the default setting is 0 according to the TRM and according to reading memory at bootup. In addition rk3288-based Chromebooks ran like this and the video codecs worked. 2. With the existing clock code if you boot up and try to enable the new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused" on the command line), you get errors like "failed to get ack on domain 'pd_video', val=0x80208". After flipping vepu/vdpu things init OK. 3. If I export and add both the vepu and vdpu to the list of clocks for RK3288_PD_VIDEO I can get past the power domain errors, but now I freeze when the vpu_mmu gets initted. 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up and probes OK showing that somehow the "vdpu" was important to keep enabled. This is because we were actually using it as a parent. 5. After this change I can hack "aclk_vcodec_pre" to parent from "aclk_vepu" using assigned-clocks and the video codec still probes OK. 6. Rockchip has said so on the mailing list [1]. ...so let's fix it. Let's also add CLK_SET_RATE_PARENT to "aclk_vcodec_pre" as suggested by Jonas Karlman. Prior to the same commit you could do clk_set_rate() on "aclk_vcodec" and it would change "aclk_vdpu". That's because "aclk_vcodec" was a simple gate clock (always gets CLK_SET_RATE_PARENT) and its direct parent was "aclk_vdpu". After that commit "aclk_vcodec_pre" gets in the way so we need to add CLK_SET_RATE_PARENT to it too. [1] https://lkml.kernel.org/r/1d17b015-9e17-34b9-baf8-c285dc1957aa@rock-chips.com Fixes: 4d3e84f9 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288") Suggested-by:
Jonas Karlman <jonas@kwiboo.se> Suggested-by:
Randy Li <ayaka@soulik.info> Signed-off-by:
-
Ulf Hansson authored
[ Upstream commit dc351d4c ] The dev->power.direct_complete flag may become set in device_prepare() in case the device don't have any PM callbacks (dev->power.no_pm_callbacks is set). This leads to a broken behaviour, when there is child having wakeup enabled and relies on its parent to be used in the wakeup path. More precisely, when the direct complete path becomes selected for the child in __device_suspend(), the propagation of the dev->power.wakeup_path becomes skipped as well. Let's address this problem, by checking if the device is a part the wakeup path or has wakeup enabled, then prevent the direct complete path from being used. Reported-by:
Loic Pallardy <loic.pallardy@st.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> [ rjw: Comment cleanup ] Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Christian König authored
[ Upstream commit 3d2aca8c ] We don't hold a reference to the old fence, so it can go away any time we are waiting for it to signal. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
Peng Li authored
[ Upstream commit cc5ff6e9 ] If there is pending skb in RX flow when close the port, and the pending buffer is not cleaned, the new packet will be added to the pending skb when the port opens again, and the first new packet has error data. This patch cleans the pending skb when clean RX ring. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Yinbo Zhu authored
[ Upstream commit 05cb6b2a ] eSDHC-A001: The data timeout counter (SYSCTL[DTOCV]) is not reliable for DTOCV values 0x4(2^17 SD clock), 0x8(2^21 SD clock), and 0xC(2^25 SD clock). The data timeout counter can count from 2^13–2^27, but for values 2^17, 2^21, and 2^25, the timeout counter counts for only 2^13 SD clocks. A-008358: The data timeout counter value loaded into the timeout counter is less than expected and can result into early timeout error in case of eSDHC data transactions. The table below shows the expected vs actual timeout period for different values of SYSCTL[DTOCV]: these two erratum has the same quirk to control it, and set SDHCI_QUIRK_RESET_AFTER_REQUEST to fix above issue. Signed-off-by:
Yinbo Zhu <yinbo.zhu@nxp.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Yinbo Zhu authored
[ Upstream commit 5dd19552 ] In the event of that any data error (like, IRQSTAT[DCE]) occurs during an eSDHC data transaction where DMA is used for data transfer to/from the system memory, setting the SYSCTL[RSTD] register may cause a system hang. If software sets the register SYSCTL[RSTD] to 1 for error recovery while DMA transferring is not complete, eSDHC may hang the system bus. This happens because the software register SYSCTL[RSTD] resets the DMA engine without waiting for the completion of pending system transactions. This erratum is to fix this issue. Signed-off-by:
-
Yinbo Zhu authored
[ Upstream commit a46e4271 ] Software writing to the Transfer Type configuration register (system clock domain) can cause a setup/hold violation in the CRC flops (card clock domain), which can cause write accesses to be sent with corrupt CRC values. This issue occurs only for write preceded by read. this erratum is to fix this issue. Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit 61102598 ] In case spi_sync_locked fails, the fix reports the error and returns the error code upstream. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Andrea Merello authored
[ Upstream commit 002ee28e ] pwrseq_emmc.c implements a HW reset procedure for eMMC chip by driving a GPIO line. It registers the .reset() cb on mmc_pwrseq_ops and it registers a system restart notification handler; both of them perform reset by unconditionally calling gpiod_set_value(). If the eMMC reset line is tied to a GPIO controller whose driver can sleep (i.e. I2C GPIO controller), then the kernel would spit warnings when trying to reset the eMMC chip by means of .reset() mmc_pwrseq_ops cb (that is exactly what I'm seeing during boot). Furthermore, on system reset we would gets to the system restart notification handler with disabled interrupts - local_irq_disable() is called in machine_restart() at least on ARM/ARM64 - and we would be in trouble when the GPIO driver tries to sleep (which indeed doesn't happen here, likely because in my case the machine specific code doesn't call do_kernel_restart(), I guess..). This patch fixes the .reset() cb to make use of gpiod_set_value_cansleep(), so that the eMMC gets reset on boot without complaints, while, since there isn't that much we can do, we avoid register the restart handler if the GPIO controller has a sleepy driver (and we spit a dev_notice() message to let people know).. This had been tested on a downstream 4.9 kernel with backported commit 83f37ee7ba33 ("mmc: pwrseq: Add reset callback to the struct mmc_pwrseq_ops") and commit ae60fb031cf2 ("mmc: core: Don't do eMMC HW reset when resuming the eMMC card"), because I couldn't boot my board otherwise. Maybe worth to RFT. Signed-off-by:
Andrea Merello <andrea.merello@gmail.com> Signed-off-by:
-
John Garry authored
[ Upstream commit d8649fc1 ] When we discover the PHY is empty in sas_rediscover_dev(), the PHY information (like negotiated linkrate) is not updated. As such, for a user examining sysfs for that PHY, they would see incorrect values: root@(none)$ cd /sys/class/sas_phy/phy-0:0:20 root@(none)$ more negotiated_linkrate 3.0 Gbit root@(none)$ echo 0 > enable root@(none)$ more negotiated_linkrate 3.0 Gbit So fix this, simply discover the PHY again, even though we know it's empty; in the above example, this gives us: root@(none)$ more negotiated_linkrate Phy disabled We must do this after unregistering the device associated with the PHY (in sas_unregister_devs_sas_addr()). Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 73e6ff71 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Unable to handle kernel paging request at virtual address ffffffbffee0002e pgd = ffffffc1d68d4000 [ffffffbffee0002e] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 94000046 [#1] PREEMPT SMP Modules linked in: f71805f(+) hwmon CPU: 3 PID: 1659 Comm: insmod Not tainted 4.5.0+ #88 Hardware name: linux,dummy-virt (DT) task: ffffffc1f6665400 ti: ffffffc1d6418000 task.ti: ffffffc1d6418000 PC is at f71805f_find+0x6c/0x358 [f71805f] Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: e53004e2 ("hwmon: New f71805f driver") Reported-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 755a9b0f ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: ba224e2c ("hwmon: New PC87427 hardware monitoring driver") Reported-by:
-
Guenter Roeck authored
[ Upstream commit 8c082675 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb ("I2C: Move hwmon drivers (2/3)") Reported-by:
-
Guenter Roeck authored
[ Upstream commit d6410408 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 8d5d45fb ("I2C: Move hwmon drivers (2/3)") Reported-by:
-
Guenter Roeck authored
[ Upstream commit 14b97ba5 ] Super-IO accesses may fail on a system with no or unmapped LPC bus. Also, other drivers may attempt to access the LPC bus at the same time, resulting in undefined behavior. Use request_muxed_region() to ensure that IO access on the requested address space is supported, and to ensure that access by multiple drivers is synchronized. Fixes: 2219cd81 ("hwmon/vt1211: Add probing of alternate config index port") Signed-off-by:
-
Enric Balletbo i Serra authored
[ Upstream commit b53b0128 ] The patch 23c7b54c: "PM / devfreq: Fix devfreq_add_device() when drivers are built as modules." leads to the following static checker warning: drivers/devfreq/devfreq.c:1043 governor_store() warn: 'governor' can also be NULL The reason is that the try_then_request_governor() function returns both error pointers and NULL. It should just return error pointers, so fix this by returning a ERR_PTR to the error intead of returning NULL. Fixes: 23c7b54c ("PM / devfreq: Fix devfreq_add_device() when drivers are built as modules.") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Kan Liang authored
[ Upstream commit f08c47d1 ] Icelake uses the same C-state residency events as Sandy Bridge. Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: acme@kernel.org Cc: jolsa@kernel.org Link: https://lkml.kernel.org/r/20190402194509.2832-10-kan.liang@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kan Liang authored
[ Upstream commit b3377c3a ] Icelake support the same RAPL counters as Skylake. Signed-off-by:
-
Kan Liang authored
[ Upstream commit cf50d79a ] Icelake is the same as the existing Skylake parts. Signed-off-by:
-
Eric Biggers authored
[ Upstream commit e37a784d ] ->i_crypt_info starts out NULL and may later be locklessly set to a non-NULL value by the cmpxchg() in fscrypt_get_encryption_info(). But ->i_crypt_info is used directly, which technically is incorrect. It's a data race, and it doesn't include the data dependency barrier needed to safely dereference the pointer on at least one architecture. Fix this by using READ_ONCE() instead. Note: we don't need to use smp_load_acquire(), since dereferencing the pointer only requires a data dependency barrier, which is already included in READ_ONCE(). We also don't need READ_ONCE() in places where ->i_crypt_info is unconditionally dereferenced, since it must have already been checked. Also downgrade the cmpxchg() to cmpxchg_release(), since RELEASE semantics are sufficient on the write side. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit a6d2a5a9 ] Currently if alloc_skb fails to allocate the skb a null skb is passed to t4_set_arp_err_handler and this ends up dereferencing the null skb. Avoid the NULL pointer dereference by checking for a NULL skb and returning early. Addresses-Coverity: ("Dereference null return") Fixes: b38a0ad8 ("RDMA/cxgb4: Set arp error handler for PASS_ACCEPT_RPL messages") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Acked-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Vincenzo Frascino authored
[ Upstream commit 81fb8736 ] clock_getres() in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; where 'hrtimer_resolution' depends on whether or not high resolution timers are enabled, which is a runtime decision. The vDSO incorrectly returns the constant CLOCK_REALTIME_RES. Fix this by exposing 'hrtimer_resolution' in the vDSO datapage and returning that instead. Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Vincenzo Frascino <vincenzo.frascino@arm.com> [will: Use WRITE_ONCE(), move adr off COARSE path, renumber labels, use 'w' reg] Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Kefeng Wang authored
[ Upstream commit 36a2ba07 ] In a system where, through IORT firmware mappings, the SMMU device is mapped to a NUMA node that is not online, the kernel bootstrap results in the following crash: Unable to handle kernel paging request at virtual address 0000000000001388 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000001388] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] SMP Modules linked in: CPU: 5 PID: 1 Comm: swapper/0 Not tainted 5.0.0 #15 pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : __alloc_pages_nodemask+0x13c/0x1068 lr : __alloc_pages_nodemask+0xdc/0x1068 ... Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: __alloc_pages_nodemask+0x13c/0x1068 new_slab+0xec/0x570 ___slab_alloc+0x3e0/0x4f8 __slab_alloc+0x60/0x80 __kmalloc_node_track_caller+0x10c/0x478 devm_kmalloc+0x44/0xb0 pinctrl_bind_pins+0x4c/0x188 really_probe+0x78/0x2b8 driver_probe_device+0x64/0x110 device_driver_attach+0x74/0x98 __driver_attach+0x9c/0xe8 bus_for_each_dev+0x84/0xd8 driver_attach+0x30/0x40 bus_add_driver+0x170/0x218 driver_register+0x64/0x118 __platform_driver_register+0x54/0x60 arm_smmu_driver_init+0x24/0x2c do_one_initcall+0xbc/0x328 kernel_init_freeable+0x304/0x3ac kernel_init+0x18/0x110 ret_from_fork+0x10/0x1c Code: f90013b5 b9410fa1 1a9f0694 b50014c2 (b9400804) ---[ end trace dfeaed4c373a32da ]-- Change the dev_set_proximity() hook prototype so that it returns a value and make it return failure if the PXM->NUMA-node mapping corresponds to an offline node, fixing the crash. Acked-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
-
Nicholas Nunley authored
[ Upstream commit bfb0ebed ] Modifying the VLAN stripping options when a port VLAN is configured will break traffic for the VSI, and conceptually doesn't make sense, so don't allow this. Signed-off-by:
Nicholas Nunley <nicholas.d.nunley@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Adam Ludkiewicz authored
[ Upstream commit 06b6e2a2 ] This patch fixes the problem with the driver being able to add only 7 multicast MAC address filters instead of 16. The problem is fixed by changing the maximum number of MAC address filters to 16+1+1 (two extra are needed because the driver uses 1 for unicast MAC address and 1 for broadcast). Signed-off-by:
Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
-
Ioana Ciocoi Radulescu authored
[ Upstream commit df8e249b ] Set the Rx flow classification enable flag only if key config operation is successful. Fixes 3f9b5c9 ("dpaa2-eth: Configure Rx flow classification key") Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit d41ce98a ] With randconfig build testing on arm64, we can run into a configuration that has CONFIG_OMAP_CONTROL_PHY=m and CONFIG_OMAP_USB2=y, which in turn causes a link failure: drivers/phy/ti/phy-omap-usb2.o: In function `omap_usb_phy_power': phy-omap-usb2.c:(.text+0x17c): undefined reference to `omap_control_phy_power' I could not come up with a good way to correctly describe the relation of the two symbols, but if we just select CONFIG_OMAP_CONTROL_PHY during compile testing, we can no longer run into the broken configuration. Fixes: 6777cee3 ("phy: ti: usb2: Add support for AM654 USB2 PHY") Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 208d3423 ] gcc points out that when CONFIG_GPIOLIB is disabled, gpiod_get_array_value_cansleep() returns 0 but fails to set its output: drivers/phy/motorola/phy-mapphone-mdm6600.c: In function 'phy_mdm6600_status': drivers/phy/motorola/phy-mapphone-mdm6600.c:220:24: error: 'values[0]' is used uninitialized in this function [-Werror=uninitialized] This could be fixed more generally in gpiolib by returning a failure code, but for this specific case, the easier workaround is to add a gpiolib dependency. Fixes: 5d1ebbda ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Paul Kocialkowski authored
[ Upstream commit e6f32efb ] On platforms where the MUSB and HCI controllers share PHY0, PHY passby is required when using the HCI controller with the PHY, but it must be disabled when the MUSB controller is used instead. Without this, PHY0 passby is always enabled, which results in broken peripheral mode on such platforms (e.g. H3/H5). Fixes: ba4bdc9e ("PHY: sunxi: Add driver for sunxi usb phy") Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Evan Green authored
[ Upstream commit 95cee0b4 ] Add a required reset to the SDM845 UFS phy to express the PHY reset bit inside the UFS controller register space. Before this change, this reset was not expressed in the DT, and the driver utilized two different callbacks (phy_init and phy_poweron) to implement a two-phase initialization procedure that involved deasserting this reset between init and poweron. This abused the two callbacks and diluted their purpose. That scheme does not work as regulators cannot be turned off in phy_poweroff because they were turned on in init, rather than poweron. The net result is that regulators are left on in suspend that shouldn't be. This new scheme gives the UFS reset to the PHY, so that it can fully initialize itself in a single callback. We can then turn regulators on during poweron and off during poweroff. Signed-off-by:
Evan Green <evgreen@chromium.org> Reviewed-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Stephen Boyd <swboyd@chromium.org> Signed-off-by:
-
Russell King authored
[ Upstream commit 1262cc88 ] During boot, I get this kernel warning: WARNING: CPU: 0 PID: 19001 at kernel/dma/debug.c:1301 debug_dma_map_sg+0x284/0x3dc etnaviv etnaviv: DMA-API: mapping sg segment longer than device claims to support [len=3145728] [max=65536] Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_broute ebtable_nat ip6table_raw ip6table_nat nf_nat_ipv6 ip6table_mangle iptable_raw iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 libcrc32c iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter caam_jr error snd_soc_imx_spdif imx_thermal snd_soc_imx_audmux nvmem_imx_ocotp snd_soc_sgtl5000 caam imx_sdma virt_dma coda rc_cec v4l2_mem2mem snd_soc_fsl_ssi snd_soc_fsl_spdif imx_vdoa imx_pcm_dma videobuf2_dma_contig etnaviv dw_hdmi_cec gpu_sched dw_hdmi_ahb_audio imx6q_cpufreq nfsd sch_fq_codel ip_tables x_tables CPU: 0 PID: 19001 Comm: Xorg Not tainted 4.20.0+ #307 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [<c0019658>] (unwind_backtrace) from [<c001489c>] (show_stack+0x10/0x14) [<c001489c>] (show_stack) from [<c07fb420>] (dump_stack+0x9c/0xd4) [<c07fb420>] (dump_stack) from [<c00312dc>] (__warn+0xf8/0x124) [<c00312dc>] (__warn) from [<c00313d0>] (warn_slowpath_fmt+0x38/0x48) [<c00313d0>] (warn_slowpath_fmt) from [<c00b14e8>] (debug_dma_map_sg+0x284/0x3dc) [<c00b14e8>] (debug_dma_map_sg) from [<c046eb40>] (drm_gem_map_dma_buf+0xc4/0x13c) [<c046eb40>] (drm_gem_map_dma_buf) from [<c04c3314>] (dma_buf_map_attachment+0x38/0x5c) [<c04c3314>] (dma_buf_map_attachment) from [<c046e728>] (drm_gem_prime_import_dev+0x74/0x104) [<c046e728>] (drm_gem_prime_import_dev) from [<c046e5bc>] (drm_gem_prime_fd_to_handle+0x84/0x17c) [<c046e5bc>] (drm_gem_prime_fd_to_handle) from [<c046edd0>] (drm_prime_fd_to_handle_ioctl+0x38/0x4c) [<c046edd0>] (drm_prime_fd_to_handle_ioctl) from [<c0460efc>] (drm_ioctl_kernel+0x90/0xc8) [<c0460efc>] (drm_ioctl_kernel) from [<c0461114>] (drm_ioctl+0x1e0/0x3b0) [<c0461114>] (drm_ioctl) from [<c01cae20>] (do_vfs_ioctl+0x90/0xa48) [<c01cae20>] (do_vfs_ioctl) from [<c01cb80c>] (ksys_ioctl+0x34/0x60) [<c01cb80c>] (ksys_ioctl) from [<c0009000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd81a9fa8 to 0xd81a9ff0) 9fa0: b6c69c88 bec613f8 00000009 c00c642e bec613f8 b86c4600 9fc0: b6c69c88 bec613f8 c00c642e 00000036 012762e0 01276348 00000300 012d91f8 9fe0: b6989f18 bec613dc b697185c b667be5c irq event stamp: 47905 hardirqs last enabled at (47913): [<c0098824>] console_unlock+0x46c/0x680 hardirqs last disabled at (47922): [<c0098470>] console_unlock+0xb8/0x680 softirqs last enabled at (47754): [<c000a484>] __do_softirq+0x344/0x540 softirqs last disabled at (47701): [<c0038700>] irq_exit+0x124/0x144 ---[ end trace af477747acbcc642 ]--- The reason is the contiguous buffer exceeds the default maximum segment size of 64K as specified by dma_get_max_seg_size() in linux/dma-mapping.h. Fix this by providing our own segment size, which is set to 2GiB to cover the window found in MMUv1 GPUs. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 7dbcf2b0 ] Commit 37fe6a42 ("x86: Check stack overflow in detail") added a broad check for the full exception stack area, i.e. it considers the full exception stack area as valid. That's wrong in two aspects: 1) It does not check the individual areas one by one 2) #DF, NMI and #MCE are not enabling interrupts which means that a regular device interrupt cannot happen in their context. In fact if a device interrupt hits one of those IST stacks that's a bug because some code path enabled interrupts while handling the exception. Limit the check to the #DB stack and consider all other IST stacks as 'overflow' or invalid. Signed-off-by:
-
