Change greybus_alloc_gbuf() so all it does is allocate the gbuf data
structure.  Move all of the initialization of the gbuf structure in
the caller.  Do the inverse in the caller prior to freeing the gbuf
structure via greybus_free_gbuf().  Use a null gbuf->transfer_buffer
pointer rather than a null gbuf pointer to indicate an unused gbuf.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This converts some of the operation code to start leveraging the
new gb_message type.  Instead of creating the request and response
gbufs, we initialize (and tear down with a new function) the
request and response message structures.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

A Greybus buffer (gbuf) is a generic buffer used for data transfer
over a Greybus interconnect.  We only ever use gbufs in operations,
which always involve exactly two of them.  The lifetime of a gbuf is
therefore directly connected to the lifetime of an operation, so
there no real need to manage gbufs separate from operations.

This patch begins the process of removing the gbuf abstraction, on
favor of a new data type, gb_message.  The purpose of a gb_message
is--like a gbuf--to represent data to be transferred over Greybus.
However a gb_message is oriented toward the more restrictive way
we do Greybus transfers--as operation messages (either a request or
a response).

This patch simply defines the structure in its initial form, and
defines the request and response fields in a Greybus operation
structure as embedded instances of that type.  The gbuf pointer
is defined within the gb_message structure, and as a result lots
of code needs to be tweaked to reference the request and response
gbufs as subfields of the request and response structures.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

We no longer need struct gbuf defined in "greybus.h".  An upcoming
patch will embed a gbuf struct (not a pointer) into the operation
structure, and to do that we'll need the struct defined prior to the
operation.  Just move the gbuf definition into "operation.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Since there is only ever one reference to a gbuf, we don't need a
kref to figure out when it can be freed.  Get rid of the kref and
its supporting code.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

These functions are never used, so we can get rid of them.
Since there's no reference-getting function any more, we no
longer need "gbuf_mutex" to avoid racing gets and puts, so
get rid of that too.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The protocol values had gotten out of sync with the Greybus Protocol
specification document, so bring them back into sync by changing a few
values, and adding the missing values.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The only time we get a cport id is when setting up a new connection.
We already have a (coarser-grained) spin lock that's used to protect
the connection lists, and we can use that same lock for protecting
the hd's connection id map.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

First of all, there's a bug in _gb_hd_connection_insert, which
Viresh found.  But pointing out that problem just called attention
to the fact that I have planning to to remove the affected block of
code.

The set of connections associated with a host device is currently
maintained in a red-black tree.  The number of connections we're
likely to have is on the order of a hundred, and at least for now
isn't even going to approach that.  When this code first went in,
Greg asserted that using a list is speedier than a red-black tree
for smallish numbers of elements (maybe up to a few hundred?).

So this patch just removes the host device's red-black tree of
connections, using a simple list instead.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

The only thing we now use the gbuf->operation pointer for is
to get access to its connection's host device.

Record the host device pointer directly in the gbuf, rather
than keeping a pointer to the operation.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

If the buffer allocated in the ES1 alloc_gbuf_data() routine is for
outbound data, we are getting the destination CPort id from the
connection.  Switch to using the copy of the destination cport id
we now have in the gbuf instead.

Check for a valid CPort id there only if we're inserting it into
the buffer.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Rather than indicating whether a gbuf is intended for outbound data,
record its destination CPort id.  That's what's really needed by
the ES1 host driver.  Use CPORT_ID_BAD when the buffer is intended
for inbound data.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Add a reference counter to the operations structure.  We'll
need this when operations are actually allowed to complete
asynchronously.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This patch does some cleanup of gb_connection_operation_recv().
    - Improve the header comments
    - Verify message is big enough for header before interpreting
      beginning of the message as a header
    - Verify at buffer creation time rather than receive time that
      no operation buffer is bigger than the maximum allowed.  We
      can then compare the incoming data size against the buffer.
    - When a response message arrives, record its status in the
      operation result, not in the buffer status.
    - Record a buffer overflow as an operation error.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

It's possible this function was destined to do something important,
but at this point it's pretty pointless.  Get rid of it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This gets rid of a block of unnecessary forward declarations in
"greybus.h".
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Move the cancel_delayed_work() call so it's done separate from the
removing the operation from the pending list.

This should have been part of this commit:
    d3809f7 greybus: move timeout out of gb_operation_insert()
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Flush out the Greybus UART driver to actually implement greybus
requests.  The number of Greybus Protocol operations has been reduced
down to a managable number, and, if you look closely, you will notice it
follows the CDC ACM USB specification, which can drive UART devices
quite well, no need for complex UART state changes, leave all of that
logic up to the firmware, if it wants/needs it.

The Greybus Protocol spec has been updated to match the driver.

TODO: There are 2 requests from the device to the host that need to be
implemented.  As this isn't fully hooked up in the Greybus core, that is
not implemented here yet either.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Implement a skeleton for the uevent framework, to be filled in later
when we figure out what type of module "matching" we want to do for
things (connections, interfaces, modules, etc.)

Based on a patch from Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This reverts commit 4d1529e6687d53878b71cdcd646e28e10d62c2e8.

Alex reports that this causes problems.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

This reverts commit b8ba855506906de71df5b12b50cdbbf7259a930c.

needed to revert an older change.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

That's where it belong to. Also rename it in a similar way to:
gb_interface_create() and gb_interface_destroy().
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Some of module specific routines were present in core.c instead of module.c.
Move them to the right place.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Also fix print message.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Though this doesn't cause any logical issues as far as the behavior of the
routine is concerned as the local variable would be considered inside the
'while' loop.

But its better not to use the same name for variables at different levels.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Just an extra check to make sure the list isn't corrupted.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Suggested-by: Alex Elder <elder@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Most of the attribute routines are created with gb_module_attr() and few are
left out because they weren't printing 32 bit hexadecimal values.

Extend gb_module_attr() to cover more cases.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>

Also fix indentation.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>