- 20 May, 2022 1 commit
-
-
Mark Brown authored
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Remove two dependencies - issues reported by Intel kernel test bot.
-
- 19 May, 2022 10 commits
-
-
ChiYuan Huang authored
From the datasheet, the only way to meet the lowest power consumption is to pull low the 'pwdnn' gpio. But if it is low, IC will keep in reset state, all registers reset to default. And the power consumption is listed below 1. amp off and 'pwdnn' high => idle state, PVDD = 1mA, DVDD = 7mA 2. amp off and 'pwdnn' low => shutdown state, PVDD < 20uA, DVDD < 15uA It's the large difference for the consumption current This fix is to use pm_runtime and regcache to handle 'pwdnn' gpio control. Signed-off-by:
ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/1652926418-8519-3-git-send-email-u0084500@gmail.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
ChiYuan Huang authored
For RG 3byte read, the value order is offset [0], [1], and [2]. Signed-off-by:
-
V sujith kumar Reddy authored
RT1019 codec has two ways of controlling the en_spkr. one way is controlling through gpio pin method the another way is through codec register update through driver. Now Speaker enable/disable is controlled through codec register updated by codec driver. This patch reverts gpio logic. This reverts commit 5c5f08f7 ("ASoC: amd: acp: Power on/off the speaker enable gpio pin based on DAPM callback.") Signed-off-by:
V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com> Link: https://lore.kernel.org/r/20220516160619.17832-2-Vsujithkumar.Reddy@amd.comSigned-off-by:
-
V sujith kumar Reddy authored
RT1019 codec has two ways of controlling the en_spkr. one way is controlling through gpio pin method the another way is through codec register update through driver. Now Speaker enable/disable is controlled through codec register updated by codec driver. This patch reverts gpio logic. This reverts commit 7fa5c33d ("ASoC: amd: acp: Set gpio_spkr_en to None for max speaker amplifer in machine driver"). Signed-off-by:
-
Yang Yingliang authored
Fix the missing clk_disable_unprepare() before return from wm2000_anc_transition() in the error handling case. Fixes: 514cfd6d ("ASoC: wm2000: Integrate with clock API") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220514091053.686416-1-yangyingliang@huawei.comSigned-off-by:
-
YueHaibing authored
sound/soc/codecs/lpass-macro-common.c:28 lpass_macro_pds_init() warn: passing zero to 'PTR_ERR' sound/soc/codecs/lpass-macro-common.c:38 lpass_macro_pds_init() warn: passing zero to 'PTR_ERR' sound/soc/codecs/lpass-macro-common.c:54 lpass_macro_pds_init() warn: passing zero to 'ERR_PTR' dev_pm_domain_attach_by_name() may return NULL, set 'ret' as -ENODATA to fix this warning. Fixes: 1a8ee4cf ("ASoC: codecs: Fix error handling in power domain init and exit handlers") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220516120909.36356-1-yuehaibing@huawei.comSigned-off-by:
-
Pierre-Louis Bossart authored
Use pm_runtime_resume_and_get() to replace the pm_runtime_get_sync() and pm_runtime_put_noidle() pattern. No functional changes. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220517173715.468894-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Wan Jiabing authored
Fix following checkincludes.pl warning: sound/soc/sof/mediatek/mt8195/mt8195.c: linux/of_platform.h is included more than once. Signed-off-by:
Wan Jiabing <wanjiabing@vivo.com> Link: https://lore.kernel.org/r/20220518125902.13407-1-wanjiabing@vivo.comSigned-off-by:
-
Pierre-Louis Bossart authored
commit dcc2c012 ("ASoC: Fix gpiolib dependencies") removed a series of unnecessary dependencies on GPIOLIB when the gpio was optional. A similar simplification seems valid for rt1015p, so remove the dependency as well. This will avoid the following warning WARNING: unmet direct dependencies detected for SND_SOC_RT1015P Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_INTEL_SOF_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] && (SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C [=y] && ACPI [=y] && (SND_HDA_CODEC_HDMI [=y] && SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] || COMPILE_TEST [=y]) || SND_SOC_SOF_BAYTRAIL [=n] && (X86_INTEL_LPSS [=n] || COMPILE_TEST [=y])) Reported-by:
kernel test robot <yujie.liu@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
commit dcc2c012 ("ASoC: Fix gpiolib dependencies") removed a series of unnecessary dependencies on GPIOLIB when the gpio was optional. A similar simplification seems valid for max98357a, so remove the dependency as well. This will avoid the following warning WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_INTEL_SOF_CS42L42_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_INTEL_MACH [=y] && (SND_SOC_SOF_HDA_LINK [=y] || SND_SOC_SOF_BAYTRAIL [=n]) && I2C [=y] && ACPI [=y] && SND_HDA_CODEC_HDMI [=y] && SND_SOC_SOF_HDA_AUDIO_CODEC [=y] && (MFD_INTEL_LPSS [=y] || COMPILE_TEST [=n]) Reported-by:
-
- 17 May, 2022 18 commits
-
-
Mark Brown authored
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: Part three of main AVS driver series. This series was originally part of the initial series which was later divided [1] into smaller, easier-to-review chunks. Thus, many patches found here were already present on the list. This series consists of code typical to many drivers - PCI driver operations, trace ability, PM operations - as well as PCM handlers for all standard audio interfaces, that is, HDA, I2S and DMIC are found here. Series starts with updating firmware boot flow - libraries are no longer ignored. This change is dependent on already merged topology code [2] and because of that could not be part of the initial series [1]. PCM operations are split into four changes. First component operations alone i.e. operations which are usually agnostic towards path position (FE/BE). Then it continues with "generic" FE operations - there is no interface split here as from Intel ADSP point of view, FE, or HOST side as it's called in the specs, involves HD-Audio operations only. BE (also known as LINK) side on the other hand is divided into "non-HD-Audio" and HD-Audio part. The former represents transfer over DMIC and I2S interfaces both. While patches implementing standard PCI driver operations along (again standard) HD-Audio initialization routines followed up by power management handlers are two major ones, series covers also other important subjects such as: While patches implementing standard PCI driver operations along (again standard) HD-Audio initialization routines followed up by power management handlers are two major ones, series covers also other important subjects such as: - event tracing - preparation for firmware tracing (debugability) - coredump (debugability) - recovery flow (attempt recovery after IPC timeout or exception) - D0ix (D0 device substate, complements standard power management) Series is finalized by actual addition of supported platforms: SKL and APL-based. Platform-specific files are limited to firmware-specific bits, that is, bits that are specific to given firmware generation. Everything else is shared and is part of already upstream messaging code found in ipc.c, messages.c and messages.h files. Changes in v3: - addressed (hopefully) trace-code compilation under .configs with CONFIG_FTRACE dropped Changes in v2: - usage of avs_releast_last_firmware() dropped in error path for library loading procedure as suggested by Pierre - 'link_mask' usage replaced with 'i2s_link_mask' as requested by Pierre. Existing code addressed with new patch: "ASoC: Intel: avs: Replace link_mask usage with i2s_link_mask" - fixed possible race during recovery flow (->recovering flag is now atomic and tested in single location only). - dropped platform prefixes for basically all i2s board descriptors - 'ssp_test' renamed to 'i2s_test' to match naming convention of other boards - simplified PM implementation for current series, 'low_power' bits moved to future series - replaced SND_INTEL_DSP_DRIVER_SST with _AVS as suggested by Mark. Required changes to intel-dspcfg will be added in future series - number of typos across commit messages addressed [1]: https://lore.kernel.org/all/20220311153544.136854-1-cezary.rojewski@intel.com/ [2]: https://lore.kernel.org/all/20220331135246.993089-1-cezary.rojewski@intel.com/ Cezary Rojewski (14): ASoC: Intel: avs: Account for libraries when booting basefw ASoC: Intel: avs: Generic soc component driver ASoC: Intel: avs: Generic PCM FE operations ASoC: Intel: avs: non-HDA PCM BE operations ASoC: Intel: avs: HDA PCM BE operations ASoC: Intel: avs: Coredump and recovery flow ASoC: Intel: avs: Prepare for firmware tracing ASoC: Intel: avs: D0ix power state support ASoC: Intel: avs: Event tracing ASoC: Intel: avs: Machine board registration ASoC: Intel: avs: PCI driver implementation ASoC: Intel: avs: Power management ASoC: Intel: avs: SKL-based platforms support ASoC: Intel: avs: APL-based platforms support Piotr Maziarz (1): ASoC: Intel: avs: Replace link_mask usage with i2s_link_mask include/sound/intel-dsp-config.h | 3 +- include/sound/soc-acpi.h | 2 + sound/soc/intel/Kconfig | 2 + sound/soc/intel/avs/Makefile | 7 +- sound/soc/intel/avs/apl.c | 250 ++++++ sound/soc/intel/avs/avs.h | 79 ++ sound/soc/intel/avs/board_selection.c | 501 +++++++++++ sound/soc/intel/avs/core.c | 631 +++++++++++++ sound/soc/intel/avs/dsp.c | 27 +- sound/soc/intel/avs/ipc.c | 253 +++++- sound/soc/intel/avs/loader.c | 84 ++ sound/soc/intel/avs/messages.c | 35 +- sound/soc/intel/avs/messages.h | 51 ++ sound/soc/intel/avs/pcm.c | 1182 +++++++++++++++++++++++++ sound/soc/intel/avs/registers.h | 8 + sound/soc/intel/avs/skl.c | 125 +++ sound/soc/intel/avs/topology.c | 14 +- sound/soc/intel/avs/trace.c | 33 + sound/soc/intel/avs/trace.h | 154 ++++ sound/soc/intel/avs/utils.c | 23 + 20 files changed, 3443 insertions(+), 21 deletions(-) create mode 100644 sound/soc/intel/avs/apl.c create mode 100644 sound/soc/intel/avs/board_selection.c create mode 100644 sound/soc/intel/avs/pcm.c create mode 100644 sound/soc/intel/avs/skl.c create mode 100644 sound/soc/intel/avs/trace.c create mode 100644 sound/soc/intel/avs/trace.h -- 2.25.1
-
Yihao Han authored
clk_put() already checks the clk ptr using !clk and IS_ERR() so there is no need to check it again before calling it. Signed-off-by:
Yihao Han <hanyihao@vivo.com> Link: https://lore.kernel.org/r/20220517033050.5191-1-hanyihao@vivo.comSigned-off-by:
-
Peter Ujfalusi authored
If user space provides smaller buffer than the IPC4 reply then it is possible that we corrupt user space memory since the IPC4 dfs_read function is not using the count directly in copy_to_user() due to the nature of an IPC4 message. Cap the remaining counter to make sure that we are not writing too much to the user space provided buffer. Add a check also to make sure that the buffer is at least the size of the IPC4 header. Fixes: 066c6762: "ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages" Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Cezary Rojewski authored
Define handlers specific to cAVS 1.5+ platforms, that is, APL and similar platforms. These differ from SKL-alike ones in terms of AudioDSP firmware generation and thus the '+' suffix. Introduciton of IMR, removal of CLDMA, D0IX support and monolithic-ation of library/module code are most impactful but are not the only changes brought with this newer generation. Some generic and 1.5 operations are being re-used to reduce code size. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220516101116.190192-16-cezary.rojewski@intel.comSigned-off-by:
-
Cezary Rojewski authored
Define handlers specific to cAVS 1.5 platforms, that is SKL, KBL, AML and all other variants based on this very version of AudioDSP architecture. Most are specific to SKL-alike platforms with only skl_log_buffer_offset() being exposed and used later by younger equivalents. Signed-off-by:
-
Cezary Rojewski authored
To preserve power during sleep operations, handle suspend (S3), hibernation (S4) and runtime (RTD3) transitions. As flow for all of is shared, define common handlers to reduce code size. Signed-off-by:
-
Cezary Rojewski authored
HD-Audio bus is a PCI device. Add all functions necessary to probe such device along with its removal sequence. Behaviour implemented for all standard operations is similar to existing solutions: sound/pci/hda and sound/soc/intel/skylake. Signed-off-by:
-
Cezary Rojewski authored
AVS driver operates with granular audio card division in mind. Super-card approach (e.g.: I2S, DMIC and HDA DAIs combined) is deprecated in favour of individual cards - one per each device. This provides necessary dynamism, especially for configurations with number of codecs present and makes it easier to survive auxiliary devices failures - one card failing to probe does not prevent others from succeeding. All boards spawned by AVS are unregistered on ->remove(). This includes dummy codecs such as DMIC. As all machine boards found in sound/soc/intel/boards are irreversibly tied to 'super-card' approach, new boards are going to be introduced. This temporarily increases number of boards available under /intel directory until skylake-driver becomes deprecated and removed. Signed-off-by:
-
Piotr Maziarz authored
'link_mask' field is intended for SoundWire, I2S should use 'i2s_link_mask' instead. Signed-off-by:
Piotr Maziarz <piotrx.maziarz@linux.intel.com> Signed-off-by:
-
Cezary Rojewski authored
Define tracing macros for easy avs debug. These cover all IPC message types: requests, replies and notifications as well as DSP-core operations and d0ix toggling. Signed-off-by:
-
Cezary Rojewski authored
Audio DSP device supports D0 substates in form of D0ix, allowing for preserving more power even when device is still considered active (D0). When entered, certain domains which are not being currently used become power gated. Entering and leaving D0ix is a complex process and differs between firmware generations. Conditions that disallow D0i3 and require immediate D0i0 transition include but may not be limited to: IPC traffic, firmware tracing and SRAM I/O. To make D0ix toggling sane, delay D0i3 transition and refresh the timer each time an IPC is requested. Signed-off-by:
-
Cezary Rojewski authored
Firmware provides its own debug functionality. While coredump is one of these, traces are the main area of interest. kfifo is enlisted to cache log data that is being pumped to driver through SRAM. Separate DSP operations are declared as actual feature implementation differs between firmware generations. As log gathering involves usage of IPCs, add all necessary: ENABLE_LOGS and SYSTEM_TIME. Signed-off-by:
-
Cezary Rojewski authored
In rare occasions, under stress conditions or hardware malfunction, DSP firmware may fail. Software is notified about such situation with EXCEPTION_CAUGHT notification. IPC timeout is also counted as critical device failure. More often than not, driver can recover from such situations by performing full reset: killing and restarting ADSP. Signed-off-by:
-
Cezary Rojewski authored
HDA streaming in DSP world means enlisting HDAudio links as BE interfaces. Another difference when compared to its DMIC and I2S friends is lack of NHLT blob usage - no additional hardware configuration is needed. Similarly to I2S component, HDA populates its DAIs dynamically, here by the means of codec->pcm_list_head. Allows for cutting the number of soc components required to support the interface. Signed-off-by:
-
Cezary Rojewski authored
DMIC and I2S interfaces differ in DMA operations from the HDAudio interface. With that in mind, implement all DAI operations to handle non-HDA BE interfaces. To prevent code duplication in newly added code, I2S platform registering is dynamic - makes use of specified port_mask and TDMs array to populate as many DAIs as required. Signed-off-by:
-
Cezary Rojewski authored
Each stream in AVS is represented by FE and BE domain. FE path stands for HOST part of the stream while BE stands for LINK (hardware) one. While BE portion is interface specific, FE is not. Handle all standard DAI operations to implement FE part of the stream. Signed-off-by:
-
Cezary Rojewski authored
Prepare for concrete PCM operations over HDA, DMIC and I2S interfaces by providing generic soc component implementation. Interface-specific components re-use this code as majority of flow is shared. Signed-off-by:
-
Cezary Rojewski authored
Not all modules are part of base firmware. Some are part of loadable libraries. These need to be loaded after base firmware reports ready status through FW_READY notification. Their loading process is similar to the base firmware's one. Request the binary file, verify and strip the manifest and load the actual code into DSP memory with help of CLDMA or HD-Audio render stream, depending on audio device generation. List of libraries needed for loading is obtained through the topology - vendor sections specifying the name of firmware files to request. Signed-off-by:
-
- 16 May, 2022 11 commits
-
-
Mark Brown authored
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>: ASoC: fsl_sai: Add support for i.MX8MM, MP, ULP platforms
-
Mark Brown authored
Merge series from Tinghan Shen <tinghan.shen@mediatek.com>: This patch provides mediatek adsp ipc support for SOF. ADSP IPC protocol offers (send/recv) interfaces using mediatek-mailbox APIs. This patch was tested and confirmed to work with SOF fw on MT8195 cherry board and MT8186 krabby board. changes since v8: - fix patchset 2 and 3. move "depends on MTK_ADSP_IPC" from SND_SOC_SOF_MTK_COMMON to SND_SOC_SOF_MT8195/MT8186 to prevent generating wrong config. changes since v7: - rebase to linux-next/next-22020504 - use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL in mtk-adsp-ipc.c - move mtk-adsp-ipc.c out from driver/firmware/mediatek - add user of mtk-adsp-ipc.h in patchset 2 and 3. changes since v6: - rebase to matthias.bgg/linux.git, v5.18-next/soc - Prefer "GPL" over "GPL v2" for MODULE_LICENSE changes since v5: - fix WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox /mtk-adsp-mailbox.o. Add MODULE_LICENSE in the last line. - Due to WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 in checkpatch, we don't remove SPDX-License in line 1. changes since v4: - add error message for wrong mbox chan changes since v3: - rebase on v5.16-rc8 - update reviewers changes since v2: - add out tag for two memory free phases changes since v1: - add comments for mtk_adsp_ipc_send and mtk_adsp_ipc_recv - remove useless MODULE_LICENSE - change label name to out_free Allen-KH Cheng (1): ASoC: SOF: mediatek: Add ipc support for mt8195 TingHan Shen (1): firmware: mediatek: add adsp ipc protocol interface Tinghan Shen (1): ASoC: SOF: mediatek: Add mt8186 ipc support drivers/firmware/Kconfig | 9 + drivers/firmware/Makefile | 1 + drivers/firmware/mtk-adsp-ipc.c | 157 ++++++++++++++++++ .../linux/firmware/mediatek/mtk-adsp-ipc.h | 65 ++++++++ sound/soc/sof/mediatek/Kconfig | 2 + sound/soc/sof/mediatek/adsp_helper.h | 12 +- sound/soc/sof/mediatek/mt8186/mt8186-loader.c | 5 + sound/soc/sof/mediatek/mt8186/mt8186.c | 141 ++++++++++++++++ sound/soc/sof/mediatek/mt8195/mt8195.c | 138 ++++++++++++++- 9 files changed, 519 insertions(+), 11 deletions(-) create mode 100644 drivers/firmware/mtk-adsp-ipc.c create mode 100644 include/linux/firmware/mediatek/mtk-adsp-ipc.h -- 2.18.0
-
Lin Ma authored
There is a logic error when removing rt5645 device as the function rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and delete the &rt5645->btn_check_timer latter. However, since the timer handler rt5645_btn_check_callback() will re-queue the jack_detect_work, this cleanup order is buggy. That is, once the del_timer_sync in rt5645_i2c_remove is concurrently run with the rt5645_btn_check_callback, the canceled jack_detect_work will be rescheduled again, leading to possible use-after-free. This patch fix the issue by placing the del_timer_sync function before the cancel_delayed_work_sync. Signed-off-by:
Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220516092035.28283-1-linma@zju.edu.cnSigned-off-by:
-
Charles Keepax authored
Currently the checking for if a component sits on the CPU or CODEC side of the DAI link is done with a helper function that checks if the component defines legacy_dai_naming. However, there are already a couple of CPU side components that explicitly opt in to non-legacy DAI naming and it doesn't seem like a very robust solution. Rather than looking for the flag check if the component is attached to any of the CODEC DAIs on the DAI link. This is more robust and helps to bring the core further in the direction of a component being a generic block rather than being classified as platform or CODEC drivers. Signed-off-by:
-
Charles Keepax authored
Passing the result of the helper function snd_soc_component_is_codec to snd_soc_register_dai is less clear than just passing the DAI naming flag directly. snd_soc_register_dai wants to know if it should use the legacy DAI naming. The CODEC distinction is more of a historical thing and not obviously directly related, and there are already a couple of CPU side components that explicitly opt in to non-legacy DAI naming. Signed-off-by:
-
Charles Keepax authored
Signed-off-by:
-
Miaoqian Lin authored
of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 6748d055 ("ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220512111331.44774-1-linmq006@gmail.comSigned-off-by:
-
YueHaibing authored
Remove duplicated includes. Signed-off-by:
-
Tinghan Shen authored
mt8186 DSP uses two hardware mailbox IP to communicate with AP. One mailbox is used for requests coming from AP, and the other one is for requests from DSP. Signed-off-by:
Allen-KH Cheng <Allen-KH.Cheng@mediatek.com> Signed-off-by:
Tinghan Shen <tinghan.shen@mediatek.com> Link: https://lore.kernel.org/r/20220512082215.3018-4-tinghan.shen@mediatek.comSigned-off-by:
-
Allen-KH Cheng authored
This patch adds mt8195 IPC support by using mailbox. On mt8195 resource, there are two mboxes used to handle ipc request and reply. We create a mtk-adsp-ipc client device to request mbox controllers. Signed-off-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220512082215.3018-3-tinghan.shen@mediatek.comSigned-off-by:
-
TingHan Shen authored
Some of mediatek processors contain the Tensilica HiFix DSP for audio processing. The communication between Host CPU and DSP firmware is taking place using a shared memory area for message passing. ADSP IPC protocol offers (send/recv) interfaces using mediatek-mailbox APIs. We use two mbox channels to implement a request-reply protocol. Signed-off-by:
Curtis Malainey <cujomalainey@chromium.org> Reviewed-by:
Tzung-Bi Shih <tzungbi@google.com> Reviewed-by:
YC Hung <yc.hung@mediatek.com> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220512082215.3018-2-tinghan.shen@mediatek.comSigned-off-by:
-
