Modify sequence of register_module & unregister_module in bundle
driver. This would affect the uevent generated for above user
space. Accordingly, we need to modify snd_soc_xxx sequence in
register_module() in codec driver.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Each module maintains connected status & a lock to protect it.
Using codec->lock we can safely serialize ASoC specific callbacks
(in response to mixer_ctl update or dai_ops) and gb module
disconnect. Thus is_connected field can be removed.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove unnecessary lock & list maintained in GB audio bundle
driver
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

read/write_lock_irqsave mechanism was used to protect modules
list & kobject_xxx() in gb_audio_manager. Since kobject_xxx calls
can sleep spin_lock variants can't be used there. So use rw_sem
for protecting modules_list.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Create a macro representing the length of the firmware file's name and
use that instead of using magic number in the code.
Suggested-by: Greg Kroah-Hartman <gregkh@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch adds Firmware Download Protocol support to firmware core,
which allows an Interface to download a firmware package over Unipro.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jun Li <li_jun@projectara.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The invalid request type has been redefined as 0x7f.

Also remove the redundant redefinition of the invalid type from the
operation header.

Note that operation type 0x00 has been repurposed for the new generic
ping operation, which will be used to implement proper connection tear
down.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Define the SVC version request, which need not need to stay the same as
the legacy version request.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove the unsupported version request from the loopback-driver request
handler.

Unsupported requests are already handled and logged using the default
case.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the unidirectional mode-switch operation.

This operation will be used in the implementation of the new generic
mode-switch functionality.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add helper functions for initiating unidirectional operations and
waiting for them to have been acknowledged as sent by the host device.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add support for initiating unidirectional operations, that is, sending
requests that do not require responses.

Note that we already handle incoming unidirectional operations.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Fix and update gb_operation_request_send() documentation and add
kernel-doc formatting.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Update the function name, which has gained a timeout suffix.

Also fix the kernel-doc formatting.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove unused function prototype that was left after a recent change.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

correct sysfs paths typo. (s/device/devices).
Signed-off-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add description for greybus host device bus_id attribute
Signed-off-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The greybus host device id can only be read by parsing the uevent if one
wants to identify a specific host device 'or' bus. This is 'lsgb' uses
today.

This change adds a bus_id attribute so libraries can identify multiple
host devices 'or' bus if they exist.

Testing Done:
Tested on Arche,
'cat /sys/bus/greybus/devices/greysbus1/bus_id'
Signed-off-by: Sandeep Patil <sspatil@google.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

A recent commit inadvertently disabled E2EFC on all interface
connections, due to a failure to clear the ES3 bootrom quirk flags
during mode switch.

Testing Done: Verified that the CPort flags are again set to 0x7 for
non-bootrom interface connections.

Fixes: 5b638080e94e ("svc: keep interfaces registered during
mode switch")
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

All firmware packages on the Modules or Interfaces are now managed by a
special Firmware Management Protocol. The Interface Manifest shall
at least contain the Firmware Management Bundle and a Firmware
Management Protocol CPort within it.

The bundle may contain additional CPorts based on the extra
functionality required to manage firmware packages.

For example, this is how the Firmware Management Bundle of the Interface
Manifest may look like:

	; Firmware Management Bundle (Bundle 1):
	[bundle-descriptor 1]
	class = 0x16

	; (Mandatory) Firmware Management Protocol on CPort 1
	[cport-descriptor 1]
	bundle = 1
	protocol = 0x18

	; (Optional) Firmware Download Protocol on CPort 2
	[cport-descriptor 2]
	bundle = 1
	protocol = 0x17

	; (Optional) SPI protocol on CPort 3
	[cport-descriptor 3]
	bundle = 1
	protocol = 0x0b

	; (Optional) Component Authentication Protocol (CAP) on CPort 4
	[cport-descriptor 4]
	bundle = 1
	protocol = 0xXX //TBD

This patch adds the basic firmware-management bundle driver, which just
creates a firmware-management connection. Support for individual
protocols will be added separately.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Originally, idea was to use widget_type to identify jack_type.
However, suggestive way is to identify jack based on jack
attributes.

Changes already exists in codec FW to report jack attributes.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This fields actually populates jack attribute. Thus, renamed to
reflect the real purpose.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

gb_activate_tx/rx is triggered from _prepare() & gb_deactivate
from shutdown(). This may cause protocol error in case shutdown
executes without _prepare due to some hw_params failure.

Also, reorganise _prepare & _shutdown calls to make it more
readable & cleaner.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Update Makefile in response to SND_SOC_DYNAMIC_DAILINK cflag
removal.

Update files for msm-dynamic-dailink.h header file removal.

Update in response to API name changes. Also, acquire sound card
controls_rwsem before adding kcontrols to avoid deadlock.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We missed this only for bundle device, fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For every time SVC instance is created, memories for storing the rail IDs
are allocated, however, they are not freed when the SVC is destroyed.
This patch fixes the memory leak by freeing the memory when debugfs for
SVC is no longer needed.

Testing Done:
- Check pwrmon debugfs after turning on and off SVC
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The power rail names and counts are unnecessarily stored in the gb_svc
structure once the SVC created, this causes waste of memory usage. This
patch removes rail names and rail counts storage from th gb_svc
structure.

Testing Done:
- Validated the readings from /d/greybus/1-svc/pwrmon/*
Signed-off-by: David Lin <dtwlin@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the new interface mailbox-event operation.

The event is sent by the SVC under certain conditions when an interface
updates its mailbox value. Specifically, this event will be used to
implement the new mode-switch functionality.

Upon reception the AP verifies that the interface is known and that the
mailbox has the expected MAILBOX_GREYBUS value. If so, the interface is
disabled before being re-enabled (re-enumerated).

Note that during mode-switch, the interface will typically already be in
a disabled state when the mailbox is written (with the ES3 bootrom being
the notable exception).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the new module inserted and removed operations.

The SVC sends these after detecting a module insertion or removal, and
in the former case after having determined the module geometry (i.e.
position and size).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the interface activation and power-down sequences.

Note that all the required SVC operations have not yet been implemented
so some stub functions are used for now.

Support for hibernating the UniPro link depends on future
power-management work so a stub function is used also for this.

Interface type handling will be refined later.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add message structures (based on the current spec) for the SVC Interface
Activate operation, and a stub function that always return the Greybus
interface type.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add stub functions for v_sys, refclk and unipro resource management.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add active state flag to avoid deactivating an interface which is
already off.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement controlled module removal through a new module attribute
"eject".

When a non-zero argument is written to the attribute, all interfaces of
the module are disabled (e.g. bundles are deregistered) and deactivated
(e.g. powered off) before instructing the SVC to physically eject the
module.

Note that the module device is not deregistered until the SVC has
reported the physical removal of all of its interfaces.

A new interface mutex is added to enforce interface state-change
serialisation.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add Greybus module abstraction that will be used to implement controlled
module removal (eject) and represent module geometry.

Greybus module devices correspond to physical modules and have one or
more interfaces. Modules have an id that is identical to the id of their
primary interface, which in turn is the interface with lowest numbered
id. The module name is constructed from the bus and module id:

        <bus_id>-<module_id>

Interfaces, bundles, and control devices are consequently renamed as

        <bus_id>-<module_id>.<interface_id>
        <bus_id>-<module_id>.<interface_id>.<bundle_id>
        <bus_id>-<module_id>.<interface_id>.ctrl

As before, interface ids (and therefore in a sense now also module ids)
correspond to physical interface positions on the frame.

Modules have the following attributes:

        module_id
        num_interfaces

where module_id is the id of the module and num_interface the number of
interfaces the module has.

Note that until SVC module-size detection has been implemented, all
interfaces are considered to be part of 1x2 modules. Specifically, the
two interfaces of a 2x2 module will be presented as two 1x2 modules for
now.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add interface re-enable helper that is used during mode switch to
disable and re-enable (enumerate) an interface.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The attribute entries have been kept mostly sorted within each device
type. Let's move the three more-recently added interface attributes
that were not.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add an entry for the recently added interface control device.

Also move the bundle-device entry below the control-device entries.
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Use the common gb_svc functions also for the recently added svc
functions. Having a common prefix clearly signals where the code
resides, something which improves readability and helps during
debugging (e.g. stack traces).

Note that all functions in svc.c except for these three use the common
prefix with the exception of the pwr_debugfs callbacks (that still use
*a* common prefix) and the attribute accessors (than can not have a
common prefix due to some macro magic).
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This change was missed while merging original patch
commit-id: 53c765c33f4a69c31027ec012e717d303bd4feca
Thus submitting it again.
Signed-off-by: Vaibhav Agarwal <vaibhav.agarwal@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>