- 01 Apr, 2020 40 commits
-
-
Dan Carpenter authored
BugLink: https://bugs.launchpad.net/bugs/1868628 commit 37b0b6b8 upstream. If sbi->s_flex_groups_allocated is zero and the first allocation fails then this code will crash. The problem is that "i--" will set "i" to -1 but when we compare "i >= sbi->s_flex_groups_allocated" then the -1 is type promoted to unsigned and becomes UINT_MAX. Since UINT_MAX is more than zero, the condition is true so we call kvfree(new_groups[-1]). The loop will carry on freeing invalid memory until it crashes. Fixes: 7c990728 ("ext4: fix potential race between s_flex_groups online resizing and access") Reviewed-by:
Suraj Jitindar Singh <surajjs@amazon.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200228092142.7irbc44yaz3by7nb@kili.mountainSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Jason Baron authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit 8a9093c7 ] tc flower rules that are based on src or dst port blocking are sometimes ineffective due to uninitialized stack data. __skb_flow_dissect() extracts ports from the skb for tc flower to match against. However, the port dissection is not done when when the FLOW_DIS_IS_FRAGMENT bit is set in key_control->flags. All callers of __skb_flow_dissect(), zero-out the key_control field except for fl_classify() as used by the flower classifier. Thus, the FLOW_DIS_IS_FRAGMENT may be set on entry to __skb_flow_dissect(), since key_control is allocated on the stack and may not be initialized. Since key_basic and key_control are present for all flow keys, let's make sure they are initialized. Fixes: 62230715 ("flow_dissector: do not dissect l4 ports for fragments") Co-developed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Dmitry Osipenko authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit c3331d2f ] The PN544 driver checks the "enable" polarity during of driver's probe and it's doing that by turning ON and OFF NFC with different polarities until enabling succeeds. It takes some time for the hardware to power-down, and thus, to deassert the IRQ that is raised by turning ON the hardware. Since the delay after last power-down of the polarity-checking process is missed in the code, the interrupt may trigger immediately after installing the IRQ handler (right after the checking is done), which results in IRQ handler trying to touch the disabled HW and ends with marking NFC as 'DEAD' during of the driver's probe: pn544_hci_i2c 1-002a: NFC: nfc_en polarity : active high pn544_hci_i2c 1-002a: NFC: invalid len byte shdlc: llc_shdlc_recv_frame: NULL Frame -> link is dead This patch fixes the occasional NFC initialization failure on Nexus 7 device. Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Xin Long authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit 245709ec ] When T2 timer is to be stopped, the asoc should also be deleted, otherwise, there will be no chance to call sctp_association_free and the asoc could last in memory forever. However, in sctp_sf_shutdown_sent_abort(), after adding the cmd SCTP_CMD_TIMER_STOP for T2 timer, it may return error due to the format error from __sctp_sf_do_9_1_abort() and miss adding SCTP_CMD_ASSOC_FAILED where the asoc will be deleted. This patch is to fix it by moving the format error check out of __sctp_sf_do_9_1_abort(), and do it before adding the cmd SCTP_CMD_TIMER_STOP for T2 timer. Thanks Hangbin for reporting this issue by the fuzz testing. v1->v2: - improve the comment in the code as Marcelo's suggestion. Fixes: 96ca468b ("sctp: check invalid value of length parameter in error cause") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Benjamin Poirier authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit e404b8c7 ] After commit 27596472 ("ipv6: fix ECMP route replacement") it is no longer possible to replace an ECMP-able route by a non ECMP-able route. For example, ip route add 2001:db8::1/128 via fe80::1 dev dummy0 ip route replace 2001:db8::1/128 dev dummy0 does not work as expected. Tweak the replacement logic so that point 3 in the log of the above commit becomes: 3. If the new route is not ECMP-able, and no matching non-ECMP-able route exists, replace matching ECMP-able route (if any) or add the new route. We can now summarize the entire replace semantics to: When doing a replace, prefer replacing a matching route of the same "ECMP-able-ness" as the replace argument. If there is no such candidate, fallback to the first route found. Fixes: 27596472 ("ipv6: fix ECMP route replacement") Signed-off-by:
Benjamin Poirier <bpoirier@cumulusnetworks.com> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
Benjamin Poirier authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit afecdb37 ] When splitting an RTA_MULTIPATH request into multiple routes and adding the second and later components, we must not simply remove NLM_F_REPLACE but instead replace it by NLM_F_CREATE. Otherwise, it may look like the netlink message was malformed. For example, ip route add 2001:db8::1/128 dev dummy0 ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 \ nexthop via fe80::30:2 dev dummy0 results in the following warnings: [ 1035.057019] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE [ 1035.057517] IPv6: NLM_F_CREATE should be set when creating new route This patch makes the nlmsg sequence look equivalent for __ip6_ins_rt() to what it would get if the multipath route had been added in multiple netlink operations: ip route add 2001:db8::1/128 dev dummy0 ip route change 2001:db8::1/128 nexthop via fe80::30:1 dev dummy0 ip route append 2001:db8::1/128 nexthop via fe80::30:2 dev dummy0 Fixes: 27596472 ("ipv6: fix ECMP route replacement") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Arun Parameswaran authored
BugLink: https://bugs.launchpad.net/bugs/1868628 commit 6f08e98d upstream. The mii management register in iproc mdio block does not have a retention register so it is lost on suspend. Save and restore value of register while resuming from suspend. Fixes: bb1a6197 ("net: phy: Initialize mdio clock at probe function") Signed-off-by:
Arun Parameswaran <arun.parameswaran@broadcom.com> Signed-off-by:
Scott Branden <scott.branden@broadcom.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jethro Beekman authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit 540e585a ] In 709772e6, RT_TABLE_COMPAT was added to allow legacy software to deal with routing table numbers >= 256, but the same change to FIB rule queries was overlooked. Signed-off-by:
Jethro Beekman <jethro@fortanix.com> Signed-off-by:
-
Petr Mladek authored
BugLink: https://bugs.launchpad.net/bugs/1868628 commit c3fee609 upstream. The commit 97f5f0cd ("Input: implement SysRq as a separate input handler") added pr_fmt() definition. It caused a duplicated message prefix in the sysrq header messages, for example: [ 177.053931] sysrq: SysRq : Show backtrace of all active CPUs [ 742.864776] sysrq: SysRq : HELP : loglevel(0-9) reboot(b) crash(c) Fixes: 97f5f0cd ("Input: implement SysRq as a separate input handler") Signed-off-by:
Petr Mladek <pmladek@suse.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by:
-
Petr Mladek authored
BugLink: https://bugs.launchpad.net/bugs/1868628 commit 075e1a0c upstream. The sysrq header line is printed with an increased loglevel to provide users some positive feedback. The original loglevel is not restored when the sysrq operation is disabled. This bug was introduced in 2.6.12 (pre-git-history) by the commit ("Allow admin to enable only some of the Magic-Sysrq functions"). Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Tommi Rantala <tommi.t.rantala@nokia.com> Signed-off-by:
-
Sergey Matyukevich authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit ea750801 ] The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute. As a result, for strictly validated commands, it's assumed to not be supported. Signed-off-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
-
Frank Sorenson authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit f52aa79d ] A number of the debug statements output file or directory mode in hex. Change these to print using octal. Signed-off-by:
Frank Sorenson <sorenson@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Sergey Matyukevich authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit bfb7bac3 ] When preparing ethtool drvinfo, check if wiphy driver is defined before dereferencing it. Driver may not exist, e.g. if wiphy is attached to a virtual platform device. Signed-off-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit a04564c9 ] We only use the parsing CRC for checking if a beacon changed, and elements with an ID > 63 cannot be represented in the filter. Thus, like we did before with WMM and Cisco vendor elements, just statically add these forgotten items to the CRC: - WLAN_EID_VHT_OPERATION - WLAN_EID_OPMODE_NOTIF I guess that in most cases when VHT/HE operation change, the HT operation also changed, and so the change was picked up, but we did notice that pure operating mode notification changes were ignored. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20200131111300.891737-22-luca@coelho.fi [restrict to VHT for the mac80211 branch] Signed-off-by:
-
Corey Minyard authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit 6b8526d3 ] In error cases a NULL can be passed to memcpy. The length will always be zero, so it doesn't really matter, but go ahead and check for NULL, anyway, to be more precise and avoid static analysis errors. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Suraj Jitindar Singh authored
BugLink: https://bugs.launchpad.net/bugs/1868628 [ Upstream commit df3da4ea ] During an online resize an array of pointers to s_group_info gets replaced so it can get enlarged. If there is a concurrent access to the array in ext4_get_group_info() and this memory has been reused then this can lead to an invalid memory access. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/20200221053458.730016-3-tytso@mit.eduSigned-off-by:
Balbir Singh <sblbir@amazon.com> Cc: stable@kernel.org Signed-off-by:
-
Suraj Jitindar Singh authored
BugLink: https://bugs.launchpad.net/bugs/1868628 commit 7c990728 upstream. During an online resize an array of s_flex_groups structures gets replaced so it can get enlarged. If there is a concurrent access to the array and this memory has been reused then this can lead to an invalid memory access. The s_flex_group array has been converted into an array of pointers rather than an array of structures. This is to ensure that the information contained in the structures cannot get out of sync during a resize due to an accessor updating the value in the old structure after it has been copied but before the array pointer is updated. Since the structures them- selves are no longer copied but only the pointers to them this case is mitigated. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/20200221053458.730016-4-tytso@mit.eduSigned-off-by:
-
Theodore Ts'o authored
BugLink: https://bugs.launchpad.net/bugs/1868628 commit 1d0c3924 upstream. During an online resize an array of pointers to buffer heads gets replaced so it can get enlarged. If there is a racing block allocation or deallocation which uses the old array, and the old array has gotten reused this can lead to a GPF or some other random kernel memory getting modified. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206443 Link: https://lore.kernel.org/r/20200221053458.730016-2-tytso@mit.eduReported-by:
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1868628 commit 8188a18e upstream We don't handle failures in the rb_allocator workqueue allocation correctly. To fix that, move the code earlier so the cleanup is easier and we don't have to undo all the interrupt allocations in this case. Signed-off-by:
Ajay Kaher <akaher@vmware.com> Signed-off-by:
-
Greg Kroah-Hartman authored
BugLink: https://bugs.launchpad.net/bugs/1868627Signed-off-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 8645e56a upstream. xen_maybe_preempt_hcall() is called from the exception entry point xen_do_hypervisor_callback with interrupts disabled. _cond_resched() evades the might_sleep() check in cond_resched() which would have caught that and schedule_debug() unfortunately lacks a check for irqs_disabled(). Enable interrupts around the call and use cond_resched() to catch future issues. Fixes: fdfd811d ("x86/xen: allow privcmd hypercalls to be preempted") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/878skypjrh.fsf@nanos.tec.linutronix.deReviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit dc749779 upstream. snd_seq_check_queue() passes the current tick and time of the given queue as a pointer to snd_seq_prioq_cell_out(), but those might be updated concurrently by the seq timer update. Fix it by retrieving the current tick and time via the proper helper functions at first, and pass those values to snd_seq_prioq_cell_out() later in the loops. snd_seq_timer_get_cur_time() takes a new argument and adjusts with the current system time only when it's requested so; this update isn't needed for snd_seq_check_queue(), as it's called either from the interrupt handler or right after queuing. Also, snd_seq_timer_get_cur_tick() is changed to read the value in the spinlock for the concurrency, too. Reported-by: syzbot+fd5e0eaa1a32999173b2@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-3-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit bb51e669 upstream. The queue flags are represented in bit fields and the concurrent access may result in unexpected results. Although the current code should be mostly OK as it's only reading a field while writing other fields as KCSAN reported, it's safer to cover both with a proper spinlock protection. This patch fixes the possible concurrent read by protecting with q->owner_lock. Also the queue owner field is protected as well since it's the field to be protected by the lock itself. Reported-by: syzbot+65c6c92d04304d0a8efc@syzkaller.appspotmail.com Reported-by: syzbot+e60ddfa48717579799dd@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-2-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit dfa9a5ef upstream. The rawmidi state flags (opened, append, active_sensing) are stored in bit fields that can be potentially racy when concurrently accessed without any locks. Although the current code should be fine, there is also no any real benefit by keeping the bitfields for this kind of short number of members. This patch changes those bit fields flags to the simple bool fields. There should be no size increase of the snd_rawmidi_substream by this change. Reported-by: syzbot+576cc007eb9f2c968200@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200214111316.26939-4-tiwai@suse.deSigned-off-by:
-
Aditya Pakki authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 2c2a7552 upstream. In crypt_scatterlist, if the crypt_stat argument is not set up correctly, the kernel crashes. Instead, by returning an error code upstream, the error is handled safely. The issue is detected via a static analysis tool written by us. Fixes: 237fead6 (ecryptfs: fs/Makefile and fs/Kconfig) Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Tyler Hicks <code@tyhicks.com> Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 807b9515 upstream. Since commit e9d3009c introduced a regression and since the fix for that regression was not perfect, revert this commit. Link: https://marc.info/?l=target-devel&m=158157054906195 Cc: Rahul Kundu <rahul.kundu@chelsio.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by:
Dakshaja Uppalapati <dakshaja@chelsio.com> Fixes: e9d3009c ("scsi: target: iscsi: Wait for all commands to finish before freeing a session") Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 76261ada upstream. Since commit 04060db4 introduces soft lockups when toggling network interfaces, revert it. Link: https://marc.info/?l=target-devel&m=158157054906196 Cc: Rahul Kundu <rahul.kundu@chelsio.com> Cc: Mike Marciniszyn <mike.marciniszyn@intel.com> Cc: Sagi Grimberg <sagi@grimberg.me> Reported-by:
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit e75fd33b upstream. In btrfs_wait_ordered_range() once we find an ordered extent that has finished with an error we exit the loop and don't wait for any other ordered extents that might be still in progress. All the users of btrfs_wait_ordered_range() expect that there are no more ordered extents in progress after that function returns. So past fixes such like the ones from the two following commits: ff612ba7 ("btrfs: fix panic during relocation after ENOSPC before writeback happens") 28aeeac1 ("Btrfs: fix panic when starting bg cache writeout after IO error") don't work when there are multiple ordered extents in the range. Fix that by making btrfs_wait_ordered_range() wait for all ordered extents even after it finds one that had an error. Link: https://github.com/kdave/btrfs-progs/issues/228#issuecomment-569777554 CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Qu Wenruo <wqu@suse.com> Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Miaohe Lin authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 23520b2d upstream. When pv_eoi_get_user() fails, 'val' may remain uninitialized and the return value of pv_eoi_get_pending() becomes random. Fix the issue by initializing the variable. Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Shijie Luo authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 9424ef56 upstream. We tested a soft lockup problem in linux 4.19 which could also be found in linux 5.x. When dir inode takes up a large number of blocks, and if the directory is growing when we are searching, it's possible the restart branch could be called many times, and the do while loop could hold cpu a long time. Here is the call trace in linux 4.19. [ 473.756186] Call trace: [ 473.756196] dump_backtrace+0x0/0x198 [ 473.756199] show_stack+0x24/0x30 [ 473.756205] dump_stack+0xa4/0xcc [ 473.756210] watchdog_timer_fn+0x300/0x3e8 [ 473.756215] __hrtimer_run_queues+0x114/0x358 [ 473.756217] hrtimer_interrupt+0x104/0x2d8 [ 473.756222] arch_timer_handler_virt+0x38/0x58 [ 473.756226] handle_percpu_devid_irq+0x90/0x248 [ 473.756231] generic_handle_irq+0x34/0x50 [ 473.756234] __handle_domain_irq+0x68/0xc0 [ 473.756236] gic_handle_irq+0x6c/0x150 [ 473.756238] el1_irq+0xb8/0x140 [ 473.756286] ext4_es_lookup_extent+0xdc/0x258 [ext4] [ 473.756310] ext4_map_blocks+0x64/0x5c0 [ext4] [ 473.756333] ext4_getblk+0x6c/0x1d0 [ext4] [ 473.756356] ext4_bread_batch+0x7c/0x1f8 [ext4] [ 473.756379] ext4_find_entry+0x124/0x3f8 [ext4] [ 473.756402] ext4_lookup+0x8c/0x258 [ext4] [ 473.756407] __lookup_hash+0x8c/0xe8 [ 473.756411] filename_create+0xa0/0x170 [ 473.756413] do_mkdirat+0x6c/0x140 [ 473.756415] __arm64_sys_mkdirat+0x28/0x38 [ 473.756419] el0_svc_common+0x78/0x130 [ 473.756421] el0_svc_handler+0x38/0x78 [ 473.756423] el0_svc+0x8/0xc [ 485.755156] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [tmp:5149] Add cond_resched() to avoid soft lockup and to provide a better system responding. Link: https://lore.kernel.org/r/20200215080206.13293-1-luoshijie1@huawei.comSigned-off-by:
Shijie Luo <luoshijie1@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by:
-
Qian Cai authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 35df4299 upstream. EXT4_I(inode)->i_disksize could be accessed concurrently as noticed by KCSAN, BUG: KCSAN: data-race in ext4_write_end [ext4] / ext4_writepages [ext4] write to 0xffff91c6713b00f8 of 8 bytes by task 49268 on cpu 127: ext4_write_end+0x4e3/0x750 [ext4] ext4_update_i_disksize at fs/ext4/ext4.h:3032 (inlined by) ext4_update_inode_size at fs/ext4/ext4.h:3046 (inlined by) ext4_write_end at fs/ext4/inode.c:1287 generic_perform_write+0x208/0x2a0 ext4_buffered_write_iter+0x11f/0x210 [ext4] ext4_file_write_iter+0xce/0x9e0 [ext4] new_sync_write+0x29c/0x3b0 __vfs_write+0x92/0xa0 vfs_write+0x103/0x260 ksys_write+0x9d/0x130 __x64_sys_write+0x4c/0x60 do_syscall_64+0x91/0xb47 entry_SYSCALL_64_after_hwframe+0x49/0xbe read to 0xffff91c6713b00f8 of 8 bytes by task 24872 on cpu 37: ext4_writepages+0x10ac/0x1d00 [ext4] mpage_map_and_submit_extent at fs/ext4/inode.c:2468 (inlined by) ext4_writepages at fs/ext4/inode.c:2772 do_writepages+0x5e/0x130 __writeback_single_inode+0xeb/0xb20 writeback_sb_inodes+0x429/0x900 __writeback_inodes_wb+0xc4/0x150 wb_writeback+0x4bd/0x870 wb_workfn+0x6b4/0x960 process_one_work+0x54c/0xbe0 worker_thread+0x80/0x650 kthread+0x1e0/0x200 ret_from_fork+0x27/0x50 Reported by Kernel Concurrency Sanitizer on: CPU: 37 PID: 24872 Comm: kworker/u261:2 Tainted: G W O L 5.5.0-next-20200204+ #5 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: writeback wb_workfn (flush-7:0) Since only the read is operating as lockless (outside of the "i_data_sem"), load tearing could introduce a logic bug. Fix it by adding READ_ONCE() for the read and WRITE_ONCE() for the write. Signed-off-by:
Qian Cai <cai@lca.pw> Link: https://lore.kernel.org/r/1581085751-31793-1-git-send-email-cai@lca.pwSigned-off-by:
-
Jann Horn authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 6ab40511 ] Check whether inputs from userspace are too long (explicit length field too big or string not null-terminated) to avoid out-of-bounds reads. As far as I can tell, this can at worst lead to very limited kernel heap memory disclosure or oopses. This bug can be triggered by an unprivileged user even if the xt_bpf module is not loaded: iptables is available in network namespaces, and the xt_bpf module can be autoloaded. Triggering the bug with a classic BPF filter with fake length 0x1000 causes the following KASAN report: ================================================================== BUG: KASAN: slab-out-of-bounds in bpf_prog_create+0x84/0xf0 Read of size 32768 at addr ffff8801eff2c494 by task test/4627 CPU: 0 PID: 4627 Comm: test Not tainted 4.15.0-rc1+ #1 [...] Call Trace: dump_stack+0x5c/0x85 print_address_description+0x6a/0x260 kasan_report+0x254/0x370 ? bpf_prog_create+0x84/0xf0 memcpy+0x1f/0x50 bpf_prog_create+0x84/0xf0 bpf_mt_check+0x90/0xd6 [xt_bpf] [...] Allocated by task 4627: kasan_kmalloc+0xa0/0xd0 __kmalloc_node+0x47/0x60 xt_alloc_table_info+0x41/0x70 [x_tables] [...] The buggy address belongs to the object at ffff8801eff2c3c0 which belongs to the cache kmalloc-2048 of size 2048 The buggy address is located 212 bytes inside of 2048-byte region [ffff8801eff2c3c0, ffff8801eff2cbc0) [...] ================================================================== Fixes: e6f30c73 ("netfilter: x_tables: add xt_bpf match") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Zubin Mithra <zsm@chromium.org> Signed-off-by:
-
Eric Dumazet authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 6cd1ed50 ] We need to make sure vc_cons[i].d is not NULL after grabbing console_lock(), or risk a crash. general protection fault, probably for non-canonical address 0xdffffc0000000068: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000340-0x0000000000000347] CPU: 1 PID: 19462 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tty_ioctl+0xa37/0x14f0 drivers/tty/tty_io.c:2660 vfs_ioctl fs/ioctl.c:47 [inline] ksys_ioctl+0x123/0x180 fs/ioctl.c:763 __do_sys_ioctl fs/ioctl.c:772 [inline] __se_sys_ioctl fs/ioctl.c:770 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:770 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45b399 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f7d13c11c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f7d13c126d4 RCX: 000000000045b399 RDX: 0000000020000080 RSI: 000000000000560a RDI: 0000000000000003 RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000666 R14: 00000000004c7f04 R15: 000000000075bf2c Modules linked in: ---[ end trace 80970faf7a67eb77 ]--- RIP: 0010:vt_ioctl+0x1f96/0x26d0 drivers/tty/vt/vt_ioctl.c:883 Code: 74 41 e8 bd a6 84 fd 48 89 d8 48 c1 e8 03 42 80 3c 28 00 0f 85 e4 04 00 00 48 8b 03 48 8d b8 40 03 00 00 48 89 fa 48 c1 ea 03 <42> 0f b6 14 2a 84 d2 74 09 80 fa 03 0f 8e b1 05 00 00 44 89 b8 40 RSP: 0018:ffffc900086d7bb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffffff8c34ee88 RCX: ffffc9001415c000 RDX: 0000000000000068 RSI: ffffffff83f0e6e3 RDI: 0000000000000340 RBP: ffffc900086d7cd0 R08: ffff888054ce0100 R09: fffffbfff16a2f6d R10: ffff888054ce0998 R11: ffff888054ce0100 R12: 000000000000001d R13: dffffc0000000000 R14: 1ffff920010daf79 R15: 000000000000ff7f FS: 00007f7d13c12700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd477e3c38 CR3: 0000000095d0a000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20200210190721.200418-1-edumazet@google.comSigned-off-by:
-
Al Viro authored
BugLink: https://bugs.launchpad.net/bugs/1868627 [ Upstream commit 1b3bce4d ] Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Mathias Nyman authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit a3ae87dc upstream. Intel Comet Lake based platform require the XHCI_PME_STUCK_QUIRK quirk as well. Without this xHC can not enter D3 in runtime suspend. Cc: stable@vger.kernel.org Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200210134553.9144-5-mathias.nyman@linux.intel.comSigned-off-by:
-
Fugang Duan authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit f7670783 upstream. There has oops as below happen on i.MX8MP EVK platform that has 6G bytes DDR memory. when (xmit->tail < xmit->head) && (xmit->head == 0), it setups one sg entry with sg->length is zero: sg_set_buf(sgl + 1, xmit->buf, xmit->head); if xmit->buf is allocated from >4G address space, and SDMA only support <4G address space, then dma_map_sg() will call swiotlb_map() to do bounce buffer copying and mapping. But swiotlb_map() don't allow sg entry's length is zero, otherwise report BUG_ON(). So the patch is to correct the tx DMA scatter list. Oops: [ 287.675715] kernel BUG at kernel/dma/swiotlb.c:497! [ 287.680592] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 287.686075] Modules linked in: [ 287.689133] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.3-00016-g3fdc4e0-dirty #10 [ 287.696872] Hardware name: FSL i.MX8MP EVK (DT) [ 287.701402] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 287.706199] pc : swiotlb_tbl_map_single+0x1fc/0x310 [ 287.711076] lr : swiotlb_map+0x60/0x148 [ 287.714909] sp : ffff800010003c00 [ 287.718221] x29: ffff800010003c00 x28: 0000000000000000 [ 287.723533] x27: 0000000000000040 x26: ffff800011ae0000 [ 287.728844] x25: ffff800011ae09f8 x24: 0000000000000000 [ 287.734155] x23: 00000001b7af9000 x22: 0000000000000000 [ 287.739465] x21: ffff000176409c10 x20: 00000000001f7ffe [ 287.744776] x19: ffff000176409c10 x18: 000000000000002e [ 287.750087] x17: 0000000000000000 x16: 0000000000000000 [ 287.755397] x15: 0000000000000000 x14: 0000000000000000 [ 287.760707] x13: ffff00017f334000 x12: 0000000000000001 [ 287.766018] x11: 00000000001fffff x10: 0000000000000000 [ 287.771328] x9 : 0000000000000003 x8 : 0000000000000000 [ 287.776638] x7 : 0000000000000000 x6 : 0000000000000000 [ 287.781949] x5 : 0000000000200000 x4 : 0000000000000000 [ 287.787259] x3 : 0000000000000001 x2 : 00000001b7af9000 [ 287.792570] x1 : 00000000fbfff000 x0 : 0000000000000000 [ 287.797881] Call trace: [ 287.800328] swiotlb_tbl_map_single+0x1fc/0x310 [ 287.804859] swiotlb_map+0x60/0x148 [ 287.808347] dma_direct_map_page+0xf0/0x130 [ 287.812530] dma_direct_map_sg+0x78/0xe0 [ 287.816453] imx_uart_dma_tx+0x134/0x2f8 [ 287.820374] imx_uart_dma_tx_callback+0xd8/0x168 [ 287.824992] vchan_complete+0x194/0x200 [ 287.828828] tasklet_action_common.isra.0+0x154/0x1a0 [ 287.833879] tasklet_action+0x24/0x30 [ 287.837540] __do_softirq+0x120/0x23c [ 287.841202] irq_exit+0xb8/0xd8 [ 287.844343] __handle_domain_irq+0x64/0xb8 [ 287.848438] gic_handle_irq+0x5c/0x148 [ 287.852185] el1_irq+0xb8/0x180 [ 287.855327] cpuidle_enter_state+0x84/0x360 [ 287.859508] cpuidle_enter+0x34/0x48 [ 287.863083] call_cpuidle+0x18/0x38 [ 287.866571] do_idle+0x1e0/0x280 [ 287.869798] cpu_startup_entry+0x20/0x40 [ 287.873721] rest_init+0xd4/0xe0 [ 287.876949] arch_call_rest_init+0xc/0x14 [ 287.880958] start_kernel+0x420/0x44c [ 287.884622] Code: 9124c021 9417aff8 a94363f7 17ffffd5 (d4210000) [ 287.890718] ---[ end trace 5bc44c4ab6b009ce ]--- [ 287.895334] Kernel panic - not syncing: Fatal exception in interrupt [ 287.901686] SMP: stopping secondary CPUs [ 288.905607] SMP: failed to stop secondary CPUs 0-1 [ 288.910395] Kernel Offset: disabled [ 288.913882] CPU features: 0x0002,2000200c [ 288.917888] Memory Limit: none [ 288.920944] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Reported-by:
Eagle Zhou <eagle.zhou@nxp.com> Tested-by:
Fugang Duan <fugang.duan@nxp.com> Cc: stable <stable@vger.kernel.org> Fixes: 7942f857 ("serial: imx: TX DMA: clean up sg initialization") Reviewed-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/1581401761-6378-1-git-send-email-fugang.duan@nxp.comSigned-off-by:
-
Thomas Gleixner authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 51dede9c upstream. Accessing the MCA thresholding controls in sysfs concurrently with CPU hotplug can lead to a couple of KASAN-reported issues: BUG: KASAN: use-after-free in sysfs_file_ops+0x155/0x180 Read of size 8 at addr ffff888367578940 by task grep/4019 and BUG: KASAN: use-after-free in show_error_count+0x15c/0x180 Read of size 2 at addr ffff888368a05514 by task grep/4454 for example. Both result from the fact that the threshold block creation/teardown code frees the descriptor memory itself instead of defining proper ->release function and leaving it to the driver core to take care of that, after all sysfs accesses have completed. Do that and get rid of the custom freeing code, fixing the above UAFs in the process. [ bp: write commit message. ] Fixes: 95268664 ("[PATCH] x86_64: mce_amd support for family 0x10 processors") Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200214082801.13836-1-bp@alien8.deSigned-off-by:
-
Larry Finger authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 4ddf8ab8 upstream. In routine wpa_supplicant_ioctl(), the user-controlled p->length is checked to be at least the size of struct ieee_param size, but the code does not detect the case where p->length is greater than the size of the struct, thus a malicious user could be wasting kernel memory. Fixes commit a2c60d42 ("Add files for new driver - part 16"). Reported by: Pietro Oliva <pietroliva@gmail.com> Cc: Pietro Oliva <pietroliva@gmail.com> Cc: Stable <stable@vger.kernel.org> Fixes commit a2c60d42 ("Add files for new driver - part 16"). Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Link: https://lore.kernel.org/r/20200210180235.21691-4-Larry.Finger@lwfinger.netSigned-off-by:
-
Larry Finger authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 499c405b upstream. In routine rtw_hostapd_ioctl(), the user-controlled p->length is assumed to be at least the size of struct ieee_param size, but this assumption is never checked. This could result in out-of-bounds read/write on kernel heap in case a p->length less than the size of struct ieee_param is specified by the user. If p->length is allowed to be greater than the size of the struct, then a malicious user could be wasting kernel memory. Fixes commit a2c60d42 ("Add files for new driver - part 16"). Reported by: Pietro Oliva <pietroliva@gmail.com> Cc: Pietro Oliva <pietroliva@gmail.com> Cc: Stable <stable@vger.kernel.org> Fixes: a2c60d42 ("staging: r8188eu: Add files for new driver - part 16") Signed-off-by:
-
Alan Stern authored
BugLink: https://bugs.launchpad.net/bugs/1868627 commit 8099f58f upstream. Paul Zimmerman reports that his USB Bluetooth adapter sometimes crashes following system resume, when it receives a Get-Device-Descriptor request while it is busy doing something else. Such a request was added by commit a4f55d8b ("usb: hub: Check device descriptor before resusciation"). It gets sent when the hub driver's work thread checks whether a connect-change event on an enabled port really indicates a new device has been connected, as opposed to an old device momentarily disconnecting and then reconnecting (which can happen with xHCI host controllers, since they automatically enable connected ports). The same kind of thing occurs when a port's power session is lost during system suspend. When the system wakes up it sees a connect-change event on the port, and if the child device's persist_enabled flag was set then hub_activate() sets the device's reset_resume flag as well as the port's bit in hub->change_bits. The reset-resume code then takes responsibility for checking that the same device is still attached to the port, and it does this as part of the device's resume pathway. By the time the hub driver's work thread starts up again, the device has already been fully reinitialized and is busy doing its own thing. There's no need for the work thread to do the same check a second time, and in fact this unnecessary check is what caused the problem that Paul observed. Note that performing the unnecessary check is not actually a bug. Devices are supposed to be able to send descriptors back to the host even when they are busy doing something else. The underlying cause of Paul's problem lies in his Bluetooth adapter. Nevertheless, we shouldn't perform the same check twice in a row -- and as a nice side benefit, removing the extra check allows the Bluetooth adapter to work more reliably. The work thread performs its check when it sees that the port's bit is set in hub->change_bits. In this situation that bit is interpreted as though a connect-change event had occurred on the port _after_ the reset-resume, which is not what actually happened. One possible fix would be to make the reset-resume code clear the port's bit in hub->change_bits. But it seems simpler to just avoid setting the bit during hub_activate() in the first place. That's what this patch does. (Proving that the patch is correct when CONFIG_PM is disabled requires a little thought. In that setting hub_activate() will be called only for initialization and resets, since there won't be any resumes or reset-resumes. During initialization and hub resets the hub doesn't have any child devices, and so this code path never gets executed.) Reported-and-tested-by:
Paul Zimmerman <pauldzim@gmail.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://marc.info/?t=157949360700001&r=1&w=2 CC: David Heinzelmann <heinzelmann.david@gmail.com> CC: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2001311037460.1577-100000@iolanthe.rowland.orgSigned-off-by:
-
