- 01 Jun, 2023 2 commits
-
-
Krzysztof Kozlowski authored
Remove cs-gpios because it is already mentioned by common spi-controller.yaml. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230601095908.563865-2-krzysztof.kozlowski@linaro.orgSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Krzysztof Kozlowski authored
Remove properties already mentioned by common spi-controller.yaml and switch to unevaluatedProperties:false to achieve same functional effect. This makes the binding a bit smaller. Similarly there is no need to allow additionalProperties for children, because spi-controller.yaml already does it. Signed-off-by:
-
- 31 May, 2023 2 commits
-
-
Serge Semin authored
Just drop a redundant empty line from the dw_spi_debugfs_init() function left in the framework of the commit 0178f1e5 ("spi-dw-core.c: Fix error checking for debugfs_create_dir") after removing the last return statement. Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Link: https://lore.kernel.org/r/20230530221725.26319-1-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Alexander Stein authored
Having no DMA is not an error. The simplest reason is not having it configured. SPI will still be usable, so raise a warning instead to get still some attention. Signed-off-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230531072850.739021-1-alexander.stein@ew.tq-group.comSigned-off-by:
-
- 30 May, 2023 18 commits
-
-
Douglas Anderson authored
A warning added in commit b5762d95 ("spi: spi-qcom-qspi: Add DMA mode support") was missing a newline. Add it. Reported-by:
Stephen Boyd <swboyd@chromium.org> Closes: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/4573857/comment/44331d65_79128099/ Fixes: b5762d95 ("spi: spi-qcom-qspi: Add DMA mode support") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20230530111348.1.Ibd1f4827e18a26dc802cd6e5ac300d83dc1bc41c@changeidSigned-off-by:
-
Krzysztof Kozlowski authored
Make the pattern matching node names a bit stricter to improve DTS consistency. The pattern is restricted to: 1. Only one unit address or one -N suffix, 2. -N suffixes to decimal numbers. Suggested-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Mark Brown authored
Get the fixes into CI for development.
-
Mark Brown authored
Merge series from Boerge Struempfel <boerge.struempfel@gmail.com>: Some spi controller switch the mosi line to high, whenever they are idle. This may not be desired in all use cases. For example neopixel leds can get confused and flicker due to misinterpreting the idle state. Therefore, we introduce a new spi-mode bit, with which the idle behaviour can be overwritten on a per device basis.
-
Mark Brown authored
Merge series from Uwe Kleine-König <u.kleine-koenig@pengutronix.de>: Hello, compared to (implicit) v1 sent in March with Message-Id: <20230309094704.2568531-1-u.kleine-koenig@pengutronix.de>, I reworked patch 1 on feedback by AngeloGioacchino Del Regno. Patches 2 and 3 got his Reviewed-by. Best regards Uwe Uwe Kleine-König (3): spi: mt65xx: Properly handle failures in .remove() spi: mt65xx: Convert to platform remove callback returning void spi: mt65xx: Don't disguise a "return 0" as "return ret" drivers/spi/spi-mt65xx.c | 30 +++++++++++++++++------------- 1 file changed, 17 insertions(+), 13 deletions(-) base-commit: ac9a7868 -- 2.39.2
-
Boerge Struempfel authored
Added the three missing spi mode bits SPI_3WIRE_HIZ, SPI_RX_CPHA_FLIP, and SPI_MOSI_IDLE_LOW. Signed-off-by:
Boerge Struempfel <boerge.struempfel@gmail.com> Link: https://lore.kernel.org/r/20230530141641.1155691-6-boerge.struempfel@gmail.comSigned-off-by:
-
Boerge Struempfel authored
In order to increase usability, the command line options are sorted into logical groups. In addition, the usage string was sorted alphabetically, and the missing parameters '8','i' and 'o' were added. Furthermore, the option descriptions were moved further to the right, in order to allow for longer option names. Signed-off-by:
-
Boerge Struempfel authored
Allow userspace to set SPI_MOSI_IDLE_LOW and the SPI_3WIRE_HIZ mode bit using the SPI_IOC_WR_MODE32 ioctl. Signed-off-by:
-
Boerge Struempfel authored
By default, the spi-imx controller pulls the mosi line high, whenever it is idle. This behaviour can be inverted per CS by setting the corresponding DATA_CTL bit in the config register of the controller. Also, since the controller mode-bits have to be touched anyways, the SPI_CPOL and SPI_CPHA are replaced by the combined SPI_MODE_X_MASK flag. Signed-off-by:
-
Boerge Struempfel authored
Some spi controller switch the mosi line to high, whenever they are idle. This may not be desired in all use cases. For example neopixel leds can get confused and flicker due to misinterpreting the idle state. Therefore, we introduce a new spi-mode bit, with which the idle behaviour can be overwritten on a per device basis. Signed-off-by:
-
Osama Muhammad authored
This patch fixes the error checking in spi-dw-core.c in debugfs_create_dir. The DebugFS kernel API is developed in a way that the caller can safely ignore the errors that occur during the creation of DebugFS nodes. Signed-off-by:
Osama Muhammad <osmtendev@gmail.com> Link: https://lore.kernel.org/r/20230520224025.14928-1-osmtendev@gmail.comSigned-off-by:
-
Lars-Peter Clausen authored
The `width_available` array is currently placed on the `f_ospi_supports_op_width()` function's stack. But the array is never modified. Make it `static const`. This makes the code slightly smaller and more efficient. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20230528195830.164669-3-lars@metafoo.deSigned-off-by:
-
Lars-Peter Clausen authored
Use `min_t` instead of `min` with casting the individual arguments. Signed-off-by:
-
Lars-Peter Clausen authored
Replace the combination of devm_clk_get_enable() plus clk_prepare_enable() with devm_clk_get_enabled(). Slightly reduces the amount of boilerplate code. Signed-off-by:
-
Uwe Kleine-König authored
Because of the earlier if (ret) return ret; ret is always zero at the end of mtk_spi_suspend(). Write it as explicit return 0 for slightly improved clearness. Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230530081648.2199419-4-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Reviewed-by:
-
Uwe Kleine-König authored
Returning an error code in a platform driver's remove function is wrong most of the time and there is an effort to make the callback return void. To prepare this rework the function not to exit early. There wasn't a real problem because if pm runtime resume failed the only step missing was pm_runtime_disable() which isn't an issue. Signed-off-by:
-
Stephan Gerhold authored
It is usually better to request all necessary resources (clocks, regulators, ...) before starting to make use of them. That way they do not change state in case one of the resources is not available yet and probe deferral (-EPROBE_DEFER) is necessary. This is particularly important for DMA channels and IOMMUs which are not enforced by fw_devlink yet (unless you use fw_devlink.strict=1). spi-qup does this in the wrong order, the clocks are enabled and disabled again when the DMA channels are not available yet. This causes issues in some cases: On most SoCs one of the SPI QUP clocks is shared with the UART controller. When using earlycon UART is actively used during boot but might not have probed yet, usually for the same reason (waiting for the DMA controller). In this case, the brief enable/disable cycle ends up gating the clock and further UART console output will halt the system completely. Avoid this by requesting the DMA channels before changing the clock state. Fixes: 612762e8 ("spi: qup: Add DMA capabilities") Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20230518-spi-qup-clk-defer-v1-1-f49fc9ca4e02@gerhold.netSigned-off-by:
-
- 26 May, 2023 1 commit
-
-
Uwe Kleine-König authored
After commit b8a1a4cd ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f4 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by:
-
- 25 May, 2023 1 commit
-
-
Qii Wang authored
this patch advertise the availability of Dual and Quad SPI mode for ipm design. Signed-off-by:
Qii Wang <qii.wang@mediatek.com> Signed-off-by:
Tim.Kuo <Tim.kuo@mediatek.com> Link: https://lore.kernel.org/r/20230523112608.10298-1-qii.wang@mediatek.comSigned-off-by:
-
- 24 May, 2023 1 commit
-
-
Mark Brown authored
Merge up v6.4-rc3 in order to get fixes to improve the stability of my CI.
-
- 23 May, 2023 5 commits
-
-
Daniel Golle authored
When unloading the spi-mt65xx kernel module during an ongoing spi-mem operation the kernel will Oops shortly after unloading the module. This is because wait_for_completion_timeout was still running and returning into the no longer loaded module: Internal error: Oops: 0000000096000005 [#1] SMP Modules linked in: [many, but spi-mt65xx is no longer there] CPU: 0 PID: 2578 Comm: block Tainted: G W O 6.3.0-next-20230428+ #0 Hardware name: Bananapi BPI-R3 (DT) pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __lock_acquire+0x18c/0x20e8 lr : __lock_acquire+0x9b8/0x20e8 sp : ffffffc009ec3400 x29: ffffffc009ec3400 x28: 0000000000000001 x27: 0000000000000004 x26: ffffff80082888c8 x25: 0000000000000000 x24: 0000000000000000 x23: ffffffc009609da8 x22: ffffff8008288000 x21: ffffff8008288968 x20: 00000000000003c2 x19: ffffff8008be7990 x18: 00000000000002af x17: 0000000000000000 x16: 0000000000000000 x15: ffffffc008d78970 x14: 000000000000080d x13: 00000000000002af x12: 00000000ffffffea x11: 00000000ffffefff x10: ffffffc008dd0970 x9 : ffffffc008d78918 x8 : 0000000000017fe8 x7 : 0000000000000001 x6 : 0000000000000000 x5 : ffffff807fb53910 x4 : 0000000000000000 x3 : 0000000000000027 x2 : 0000000000000027 x1 : 0000000000000000 x0 : 00000000000c03c2 Call trace: __lock_acquire+0x18c/0x20e8 lock_acquire+0x100/0x2a4 _raw_spin_lock_irq+0x58/0x74 __wait_for_common+0xe0/0x1b4 wait_for_completion_timeout+0x1c/0x24 0xffffffc000acc8a4 <--- used to be mtk_spi_transfer_wait spi_mem_exec_op+0x390/0x3ec spi_mem_no_dirmap_read+0x6c/0x88 spi_mem_dirmap_read+0xcc/0x12c spinand_read_page+0xf8/0x1dc spinand_mtd_read+0x1b4/0x2fc mtd_read_oob_std+0x58/0x7c mtd_read_oob+0x8c/0x148 mtd_read+0x50/0x6c ... Prevent this by completing in mtk_spi_remove if needed. Fixes: 9f763fd2 ("spi: mediatek: add spi memory support for ipm design") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/ZFAF6pJxMu1z6k4w@makrotopia.orgSigned-off-by:
-
Clark Wang authored
When all bits of IER are set to 0, we still can observe the lpspi irq events when using DMA mode to transfer data. So disable irq to avoid the too much irq events. Signed-off-by:
Clark Wang <xiaoning.wang@nxp.com> Link: https://lore.kernel.org/r/20230505063557.3962220-1-xiaoning.wang@nxp.comSigned-off-by:
-
Rasmus Villemoes authored
The ecspi IP block on imx51/imx53/imx6 have four native chip selects. Tell that to the spi core so that any non-gpio chip selects get validated against that upper bound. Also set the SPI_MASTER_GPIO_SS so that the core verifies that, in the case where both native and gpio chip selects are in use, there is at least one leftover native chip select (or "channel", in the ecspi language) for use by the slaves sitting on gpio chip selects. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20230425134527.483607-3-linux@rasmusvillemoes.dkSigned-off-by:
-
Rasmus Villemoes authored
Near the top of the function, spi_imx->controller is set to controller (and is of course never modified again). The rest of the function uses a mix of the two expressions. For consistency, readability and better code generation, drop all the spi_imx-> indirections. Signed-off-by:
-
Charles Keepax authored
Add the missing kernel documentation to silence the build warning. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230523090124.3132-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
- 22 May, 2023 1 commit
-
-
Charles Keepax authored
When working in slave mode it seems the timing is exceedingly tight. The TX FIFO can never empty, because the master is driving the clock so zeros would be sent for those bytes where the FIFO is empty. Return to interleaving the writing of the TX FIFO and the reading of the RX FIFO to try to ensure the data is available when required. Fixes: a84c11e1 ("spi: spi-cadence: Avoid read of RX FIFO before its ready") Signed-off-by:
-
- 21 May, 2023 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/uml/linuxLinus Torvalds authored
Pull UML fix from Richard Weinberger: - Fix modular build for UML watchdog * tag 'uml-for-linus-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: harddog: fix modular build
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "ARM: - Plug a race in the stage-2 mapping code where the IPA and the PA would end up being out of sync - Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...) - FP/SVE/SME documentation update, in the hope that this field becomes clearer... - Add workaround for Apple SEIS brokenness to a new SoC - Random comment fixes x86: - add MSR_IA32_TSX_CTRL into msrs_to_save - fixes for XCR0 handling in SGX enclaves Generic: - Fix vcpu_array[0] races - Fix race between starting a VM and 'reboot -f'" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: add MSR_IA32_TSX_CTRL into msrs_to_save KVM: x86: Don't adjust guest's CPUID.0x12.1 (allowed SGX enclave XFRM) KVM: VMX: Don't rely _only_ on CPUID to enforce XCR0 restrictions for ECREATE KVM: Fix vcpu_array[0] races KVM: VMX: Fix header file dependency of asm/vmx.h KVM: Don't enable hardware after a restart/shutdown is initiated KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown KVM: arm64: vgic: Add Apple M2 PRO/MAX cpus to the list of broken SEIS implementations KVM: arm64: Clarify host SME state management KVM: arm64: Restructure check for SVE support in FP trap handler KVM: arm64: Document check for TIF_FOREIGN_FPSTATE KVM: arm64: Fix repeated words in comments KVM: arm64: Constify start/end/phys fields of the pgtable walker data KVM: arm64: Infer PA offset from VA in hyp map walker KVM: arm64: Infer the PA offset from IPA in stage-2 map walker KVM: arm64: Use the bitmap API to allocate bitmaps KVM: arm64: Slightly optimize flush_context() -
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fail graciously if BUILD_BPF_SKEL=1 is specified and clang isn't available - Add empty 'struct rq' to 'perf lock contention' to satisfy libbpf 'runqueue' type verification. This feature is built only with BUILD_BPF_SKEL=1 - Make vmlinux.h use bpf.h and perf_event.h in source directory, not system ones that may be old and not have things like 'union perf_sample_weight' - Add system include paths to BPF builds to pick things missing in the headers included by clang -target bpf - Update various header copies with the kernel sources - Change divide by zero and not supported events behavior to show 'nan'/'not counted' in 'perf stat' output. This happens when using things like 'perf stat -M TopdownL2 true', involving JSON metrics - Update no event/metric expectations affected by using JSON metrics in 'perf stat -ddd' perf test - Avoid segv with 'perf stat --topdown' for metrics without a group - Do not assume which events may have a PMU name, allowing the logic to keep an AUX event group together. Makes this usecase work again: $ perf record --no-bpf-event -c 10 -e '{intel_pt//,tlb_flush.stlb_any/aux-sample-size=8192/pp}:u' -- sleep 0.1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.078 MB perf.data ] $ perf script -F-dso,+addr | grep -C5 tlb_flush.stlb_any | head -11 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc82a2 dl_main+0x9a2 => 7f5350cb38f0 _dl_add_to_namespace_list+0x0 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cb3908 _dl_add_to_namespace_list+0x18 => 7f5350cbb080 rtld_mutex_dummy+0x0 sleep 20444 [003] 7939.510243: 1 branches:uH: 7f5350cc8350 dl_main+0xa50 => 0 [unknown] sleep 20444 [003] 7939.510244: 1 branches:uH: 7f5350cc83ca dl_main+0xaca => 7f5350caeb60 _dl_process_pt_gnu_property+0x0 sleep 20444 [003] 7939.510245: 1 branches:uH: 7f5350caeb60 _dl_process_pt_gnu_property+0x0 => 0 [unknown] sleep 20444 7939.510245: 10 tlb_flush.stlb_any/aux-sample-size=8192/pp: 0 7f5350caeb60 _dl_process_pt_gnu_property+0x0 sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc87fe dl_main+0xefe => 7f5350ccd240 strcmp+0x0 sleep 20444 [003] 7939.510254: 1 branches:uH: 7f5350cc8862 dl_main+0xf62 => 0 [unknown] - Add a check for the above use case in 'perf test test_intel_pt' - Fix build with refcount checking on arm64, it was still accessing fields that need to be wrapped so that the refcounted struct gets checked - Fix contextid validation in ARM's CS-ETM, so that older kernels without that field can still be supported - Skip unsupported aggregation for stat events found in perf.data files in 'perf script' - Add stat test for record and script to check the previous problem - Remove needless debuginfod queries from 'perf test java symbol', this was just making the test take a long time to complete - Address python SafeConfigParser() deprecation warning in 'perf test attr' - Fix __NR_execve undeclared on i386 'perf bench syscall' build error * tag 'perf-tools-fixes-for-v6.4-1-2023-05-20' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (33 commits) perf bench syscall: Fix __NR_execve undeclared build error perf test attr: Fix python SafeConfigParser() deprecation warning perf test attr: Update no event/metric expectations tools headers disabled-features: Sync with the kernel sources tools headers UAPI: Sync arch prctl headers with the kernel sources tools headers: Update the copy of x86's mem{cpy,set}_64.S used in 'perf bench' tools headers x86 cpufeatures: Sync with the kernel sources tools headers UAPI: Sync s390 syscall table file that wires up the memfd_secret syscall tools headers UAPI: Sync linux/prctl.h with the kernel sources perf metrics: Avoid segv with --topdown for metrics without a group perf lock contention: Add empty 'struct rq' to satisfy libbpf 'runqueue' type verification perf cs-etm: Fix contextid validation perf arm64: Fix build with refcount checking perf test: Add stat test for record and script perf script: Skip aggregation for stat events perf build: Add system include paths to BPF builds perf bpf skels: Make vmlinux.h use bpf.h and perf_event.h in source directory perf parse-events: Do not break up AUX event group perf test test_intel_pt.sh: Test sample mode with event with PMU name perf evsel: Modify group pmu name for software events ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix broken soft dirty tracking when using the Radix MMU (>= P9) - Fix ISA mapping when "ranges" property is not present, for PASemi Nemo boards - Fix a possible WARN_ON_ONCE hitting in BPF extable handling - Fix incorrect DMA address handling when using 2MB TCEs - Fix a bug in IOMMU table handling for SR-IOV devices - Fix the recent rework of IOMMU handling which left arch code calling clean up routines that are handled by the IOMMU core - A few assorted build fixes Thanks to Christian Zigotzky, Dan Horák, Gaurav Batra, Hari Bathini, Jason Gunthorpe, Nathan Chancellor, Naveen N. Rao, Nicholas Piggin, Pali Rohár, Randy Dunlap, and Rob Herring. * tag 'powerpc-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/iommu: Incorrect DDW Table is referenced for SR-IOV device powerpc/iommu: DMA address offset is incorrectly calculated with 2MB TCEs powerpc/iommu: Remove iommu_del_device() powerpc/crypto: Fix aes-gcm-p10 build when VSX=n powerpc/bpf: populate extable entries only during the last pass powerpc/boot: Disable power10 features after BOOTAFLAGS assignment powerpc/64s/radix: Fix soft dirty tracking powerpc/fsl_uli1575: fix kconfig warnings and build errors powerpc/isa-bridge: Fix ISA mapping when "ranges" is not present
-
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libataLinus Torvalds authored
Pull ata fix from Damien Le Moal: - Fix DT binding for the ahci-ceva driver to fully describe all iommus, from Michal * tag 'ata-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: dt-bindings: ata: ahci-ceva: Cover all 4 iommus entries
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdevLinus Torvalds authored
Pull fbdev fixes from Helge Deller: "A few small unspectacular fbdev fixes: - Fix for USB endpoint check in udlfb (found by syzbot fuzzer) - Small fix in error code path in omapfb - compiler warning fixes in fbmem & i810 - code removal and whitespace cleanups in stifb and atyfb" * tag 'fbdev-for-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: stifb: Whitespace cleanups fbdev: udlfb: Use usb_control_msg_send() fbdev: udlfb: Fix endpoint check fbdev: atyfb: Remove unused clock determination fbdev: i810: include i810_main.h in i810_dvt.c fbdev: fbmem: mark get_fb_unmapped_area() static fbdev: omapfb: panel-tpo-td043mtea1: fix error code in probe()
-
git://git.samba.org/ksmbdLinus Torvalds authored
Pull ksmbd server fixes from Steve French: - two fixes for incorrect SMB3 message validation (one for client which uses 8 byte padding, and one for empty bcc) - two fixes for out of bounds bugs: one for username offset checks (in session setup) and the other for create context name length checks in open requests * tag '6.4-rc2-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: smb2: Allow messages padded to 8byte boundary ksmbd: allocate one more byte for implied bcc[0] ksmbd: fix wrong UserName check in session_user ksmbd: fix global-out-of-bounds in smb2_find_context_vals
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs client fixes from Steve French: "Two smb3 client fixes, both related to deferred close, and also for stable: - send close for deferred handles before not after lease break response to avoid possible sharing violations - check all opens on an inode (looking for deferred handles) when lease break is returned not just the handle the lease break came in on" * tag '6.4-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: SMB3: drop reference to cfile before sending oplock break SMB3: Close all deferred handles of inode in case of handle lease break
-
