Local variables are allocated in the stack and the location list
should look like base register(s) and an offset.  Extend the
die_find_variable_by_reg() to handle the following expressions

 * DW_OP_breg{0..31}
 * DW_OP_bregx
 * DW_OP_fbreg

Ususally DWARF subprogram entries have frame base information and
use it to locate stack variable like below:

 <2><43d1575>: Abbrev Number: 62 (DW_TAG_variable)
    <43d1576>   DW_AT_location    : 2 byte block: 91 7c         (DW_OP_fbreg: -4)  <--- here
    <43d1579>   DW_AT_name        : (indirect string, offset: 0x2c00c9): i
    <43d157d>   DW_AT_decl_file   : 1
    <43d157e>   DW_AT_decl_line   : 78
    <43d157f>   DW_AT_type        : <0x43d19d7>

I found some differences on saving the frame base between gcc and clang.
The gcc uses the CFA to get the base so it needs to check the current
frame's CFI info.  In this case, stack offset needs to be adjusted from
the start of the CFA.

 <1><1bb8d>: Abbrev Number: 102 (DW_TAG_subprogram)
    <1bb8e>   DW_AT_name        : (indirect string, offset: 0x74d41): kernel_init
    <1bb92>   DW_AT_decl_file   : 2
    <1bb92>   DW_AT_decl_line   : 1440
    <1bb94>   DW_AT_decl_column : 18
    <1bb95>   DW_AT_prototyped  : 1
    <1bb95>   DW_AT_type        : <0xcc>
    <1bb99>   DW_AT_low_pc      : 0xffffffff81bab9e0
    <1bba1>   DW_AT_high_pc     : 0x1b2
    <1bba9>   DW_AT_frame_base  : 1 byte block: 9c      (DW_OP_call_frame_cfa)  <------ here
    <1bbab>   DW_AT_call_all_calls: 1
    <1bbab>   DW_AT_sibling     : <0x1bf5a>

While clang sets it to a register directly and it can check the register
and offset in the instruction directly.

 <1><43d1542>: Abbrev Number: 60 (DW_TAG_subprogram)
    <43d1543>   DW_AT_low_pc      : 0xffffffff816a7c60
    <43d154b>   DW_AT_high_pc     : 0x98
    <43d154f>   DW_AT_frame_base  : 1 byte block: 56    (DW_OP_reg6 (rbp))  <---------- here
    <43d1551>   DW_AT_GNU_all_call_sites: 1
    <43d1551>   DW_AT_name        : (indirect string, offset: 0x3bce91): foo
    <43d1555>   DW_AT_decl_file   : 1
    <43d1556>   DW_AT_decl_line   : 75
    <43d1557>   DW_AT_prototyped  : 1
    <43d1557>   DW_AT_type        : <0x43c7332>
    <43d155b>   DW_AT_external    : 1

Also it needs to update the offset after finding the type like global
variables since the offset was from the frame base.  Factor out
match_var_offset() to check global and local variables in the same way.

The type stats are improved too:

  Annotate data type stats:
  total 294, ok 160 (54.4%), bad 134 (45.6%)
  -----------------------------------------------------------
          30 : no_sym
          32 : no_mem_ops
          51 : no_var
          14 : no_typeinfo
           7 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-9-namhyung@kernel.orgSigned-off-by: Namhyung Kim <namhyung@kernel.org>

The die_get_cfa() is to get frame base register and offset at the given
instruction address (pc).  This info will be used to locate stack
variables which have location expression using DW_OP_fbreg.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-8-namhyung@kernel.orgSigned-off-by: Namhyung Kim <namhyung@kernel.org>

Global variables are accessed using PC-relative address so it needs to
be handled separately.  The PC-rel addressing is detected by using
DWARF_REG_PC.  On x86, %rip register would be used.

The address can be calculated using the ip and offset in the
instruction.  But it should start from the next instruction so add
calculate_pcrel_addr() to do it properly.

But global variables defined in a different file would only have a
declaration which doesn't include a location list.  So it first tries
to get the type info using the address, and then looks up the variable
declarations using name.  The name of global variables should be get
from the symbol table.  The declaration would have the type info.

So extend find_var_type() to take both address and name for global
variables.

The stat is now looks like:

  Annotate data type stats:
  total 294, ok 153 (52.0%), bad 141 (48.0%)
  -----------------------------------------------------------
          30 : no_sym
          32 : no_mem_ops
          61 : no_var
          10 : no_typeinfo
           8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-7-namhyung@kernel.orgSigned-off-by: Namhyung Kim <namhyung@kernel.org>

Extend find_data_type_die() to find data type from PC-relative address
using die_find_variable_by_addr().  Users need to pass the address for
the (global) variable.

The offset for the variable should be updated after finding the type
because the offset in the instruction is just to calcuate the address
for the variable.  So it changed to pass a pointer to offset and renamed
it to 'poffset'.

First it searches variables in the CU DIE as it's likely that the global
variables are defined in the file level.  And then it iterates the scope
DIEs to find a local (static) variable.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-6-namhyung@kernel.orgSigned-off-by: Namhyung Kim <namhyung@kernel.org>

A typical function prologue and epilogue include multiple stack
operations to save and restore the current value of registers.
On x86, it looks like below:

  push  r15
  push  r14
  push  r13
  push  r12

  ...

  pop   r12
  pop   r13
  pop   r14
  pop   r15
  ret

As these all touches the stack memory region, chances are high that they
appear in a memory profile data.  But these are not used for any real
purpose yet so it'd return no types.

One of my profile type shows that non neglible portion of data came from
the stack operations.  It also seems GCC generates more stack operations
than clang.

Annotate Instruction stats
total 264, ok 169 (64.0%), bad 95 (36.0%)

    Name      :  Good   Bad
  -----------------------------------------------------------
    movq      :    49    27
    movl      :    24     9
    popq      :     0    19   <-- here
    cmpl      :    17     2
    addq      :    14     1
    cmpq      :    12     2
    cmpxchgl  :     3     7

Instead of dealing them as unknown, let's create a seperate pseudo type
to represent those stack operations separately.
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-5-namhyung@kernel.orgSigned-off-by: Namhyung Kim <namhyung@kernel.org>

On x86, instructions for array access often looks like below.

  mov  0x1234(%rax,%rbx,8), %rcx

Usually the first register holds the type information and the second one
has the index.  And the current code only looks up a variable for the
first register.  But it's possible to be in the other way around so it
needs to check the second register if the first one failed.

The stat changed like this.

  Annotate data type stats:
  total 294, ok 148 (50.3%), bad 146 (49.7%)
  -----------------------------------------------------------
          30 : no_sym
          32 : no_mem_ops
          66 : no_var
          10 : no_typeinfo
           8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-4-namhyung@kernel.orgSigned-off-by: Namhyung Kim <namhyung@kernel.org>

When a sample was come from a conditional branch without a memory
operand, it could be due to a macro fusion with a previous instruction.
So it needs to check the memory operand in the previous one.

This improves the stat like below:

  Annotate data type stats:
  total 294, ok 147 (50.0%), bad 147 (50.0%)
  -----------------------------------------------------------
          30 : no_sym
          32 : no_mem_ops
          71 : no_var
           6 : no_typeinfo
           8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-3-namhyung@kernel.orgSigned-off-by: Namhyung Kim <namhyung@kernel.org>

For the performance reason, I prefer llvm-objdump over GNU's.  But I
found that llvm-objdump puts x86 lock prefix in a separate line like
below.

  ffffffff81000695: f0                    lock
  ffffffff81000696: ff 83 54 0b 00 00     incl    2900(%rbx)

This should be parsed properly, but I just changed to find the insn
with next offset for now.

This improves the statistics as it can process more instructions.

  Annotate data type stats:
  total 294, ok 144 (49.0%), bad 150 (51.0%)
  -----------------------------------------------------------
          30 : no_sym
          35 : no_mem_ops
          71 : no_var
           6 : no_typeinfo
           8 : bad_offset
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240117062657.985479-2-namhyung@kernel.orgSigned-off-by: Namhyung Kim <namhyung@kernel.org>

If pkg-config is not installed when libtraceevent is linked, the build fails.

The error information is as follows:

  $ make
  <SNIP>
  In file included from /home/yjh/projects_linux/perf-tool-next/linux/tools/perf/util/evsel.c:43:
  /home/yjh/projects_linux/perf-tool-next/linux/tools/perf/util/trace-event.h:149:62: error: operator '&&' has no right operand
    149 | #if defined(LIBTRACEEVENT_VERSION) &&  LIBTRACEEVENT_VERSION >= MAKE_LIBTRACEEVENT_VERSION(1, 5, 0)
        |                                                              ^~
  error: command '/usr/bin/gcc' failed with exit code 1
  cp: cannot stat 'python_ext_build/lib/perf*.so': No such file or directory
  make[2]: *** [Makefile.perf:668: python/perf.cpython-310-x86_64-linux-gnu.so] Error 1
  make[2]: *** Waiting for unfinished jobs....

Because pkg-config is not installed, fail to get libtraceevent version in
Makefile.config file. As a result, LIBTRACEEVENT_VERSION is empty.
However, the preceding error information is not user-friendly.

Identify errors in advance by checking that pkg-config is installed at
compile time.

The build results of various scenarios are as follows:

1. build successful when libtraceevent is not linked and pkg-config is not installed

  $ pkg-config --version
  -bash: /usr/bin/pkg-config: No such file or directory
  $ make clean >/dev/null
  $ make NO_LIBTRACEEVENT=1 >/dev/null
  Makefile.config:1133: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
    PERF_VERSION = 6.7.rc6.gd988c9f5
  $ echo $?
  0

2. dummy pkg-config is missing when libtraceevent is linked

  $ pkg-config --version
  -bash: /usr/bin/pkg-config: No such file or directory
  $ make clean >/dev/null
  $ make >/dev/null
  Makefile.config:221: *** Error: pkg-config needed by libtraceevent is missing on this system, please install it.  Stop.
  make[1]: *** [Makefile.perf:251: sub-make] Error 2
  make: *** [Makefile:70: all] Error 2
  $ echo $?
  2

3. build successful when libtraceevent is linked and pkg-config is installed

  $ pkg-config --version
  0.29.2
  $ make clean >/dev/null
  $ make >/dev/null
  Makefile.config:1133: No alternatives command found, you need to set JDIR= to point to the root of your Java directory
    PERF_VERSION = 6.7.rc6.gd988c9f5
  $ echo $?
  0
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240112034019.3558584-1-yangjihong1@huawei.comSigned-off-by: Namhyung Kim <namhyung@kernel.org>

This test case often fails on s390 (about 2 out of 10) because the
10% percent limit on the difference between --bpf-counters event counting
and s390 hardware counting is more than 10% in all failure cases.
Raise the limit to 20% on s390 and the test case succeeds.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: gor@linux.ibm.com
Cc: hca@linux.ibm.com
Cc: sumanthk@linux.ibm.com
Cc: svens@linux.ibm.com
Link: https://lore.kernel.org/r/20240108084009.3959211-1-tmricht@linux.ibm.comSigned-off-by: Namhyung Kim <namhyung@kernel.org>

Pull more bcachefs updates from Kent Overstreet:
 "Some fixes, Some refactoring, some minor features:

   - Assorted prep work for disk space accounting rewrite

   - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this
     makes our trigger context more explicit

   - A few fixes to avoid excessive transaction restarts on
     multithreaded workloads: fstests (in addition to ktest tests) are
     now checking slowpath counters, and that's shaking out a few bugs

   - Assorted tracepoint improvements

   - Starting to break up bcachefs_format.h and move on disk types so
     they're with the code they belong to; this will make room to start
     documenting the on disk format better.

   - A few minor fixes"

* tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits)
  bcachefs: Improve inode_to_text()
  bcachefs: logged_ops_format.h
  bcachefs: reflink_format.h
  bcachefs; extents_format.h
  bcachefs: ec_format.h
  bcachefs: subvolume_format.h
  bcachefs: snapshot_format.h
  bcachefs: alloc_background_format.h
  bcachefs: xattr_format.h
  bcachefs: dirent_format.h
  bcachefs: inode_format.h
  bcachefs; quota_format.h
  bcachefs: sb-counters_format.h
  bcachefs: counters.c -> sb-counters.c
  bcachefs: comment bch_subvolume
  bcachefs: bch_snapshot::btime
  bcachefs: add missing __GFP_NOWARN
  bcachefs: opts->compression can now also be applied in the background
  bcachefs: Prep work for variable size btree node buffers
  bcachefs: grab s_umount only if snapshotting
  ...

Pull timer updates from Thomas Gleixner:
 "Updates for time and clocksources:

   - A fix for the idle and iowait time accounting vs CPU hotplug.

     The time is reset on CPU hotplug which makes the accumulated
     systemwide time jump backwards.

   - Assorted fixes and improvements for clocksource/event drivers"

* tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug
  clocksource/drivers/ep93xx: Fix error handling during probe
  clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings
  clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings
  clocksource/timer-riscv: Add riscv_clock_shutdown callback
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs

Pull powerpc fixes from Aneesh Kumar:

 - Increase default stack size to 32KB for Book3S

Thanks to Michael Ellerman.

* tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: Increase default stack size to 32KB

Add line breaks - inode_to_text() is now much easier to read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs_format.h has gotten too big; let's do some organizing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Add a field to bch_snapshot for creation time; this will be important
when we start exposing the snapshot tree to userspace.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The "apply this compression method in the background" paths now use the
compression option if background_compression is not set; this means that
setting or changing the compression option will cause existing data to
be compressed accordingly in the background.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bcachefs btree nodes are big - typically 256k - and btree roots are
pinned in memory. As we're now up to 18 btrees, we now have significant
memory overhead in mostly empty btree roots.

And in the future we're going to start enforcing that certain btree node
boundaries exist, to solve lock contention issues - analagous to XFS's
AGIs.

Thus, we need to start allocating smaller btree node buffers when we
can. This patch changes code that refers to the filesystem constant
c->opts.btree_node_size to refer to the btree node buffer size -
btree_buf_bytes() - where appropriate.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

When I was testing mongodb over bcachefs with compression,
there is a lockdep warning when snapshotting mongodb data volume.

$ cat test.sh
prog=bcachefs

$prog subvolume create /mnt/data
$prog subvolume create /mnt/data/snapshots

while true;do
    $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s)
    sleep 1s
done

$ cat /etc/mongodb.conf
systemLog:
  destination: file
  logAppend: true
  path: /mnt/data/mongod.log

storage:
  dbPath: /mnt/data/

lockdep reports:
[ 3437.452330] ======================================================
[ 3437.452750] WARNING: possible circular locking dependency detected
[ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G            E
[ 3437.453562] ------------------------------------------------------
[ 3437.453981] bcachefs/35533 is trying to acquire lock:
[ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190
[ 3437.454875]
               but task is already holding lock:
[ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.456009]
               which lock already depends on the new lock.

[ 3437.456553]
               the existing dependency chain (in reverse order) is:
[ 3437.457054]
               -> #3 (&type->s_umount_key#48){.+.+}-{3:3}:
[ 3437.457507]        down_read+0x3e/0x170
[ 3437.457772]        bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.458206]        __x64_sys_ioctl+0x93/0xd0
[ 3437.458498]        do_syscall_64+0x42/0xf0
[ 3437.458779]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.459155]
               -> #2 (&c->snapshot_create_lock){++++}-{3:3}:
[ 3437.459615]        down_read+0x3e/0x170
[ 3437.459878]        bch2_truncate+0x82/0x110 [bcachefs]
[ 3437.460276]        bchfs_truncate+0x254/0x3c0 [bcachefs]
[ 3437.460686]        notify_change+0x1f1/0x4a0
[ 3437.461283]        do_truncate+0x7f/0xd0
[ 3437.461555]        path_openat+0xa57/0xce0
[ 3437.461836]        do_filp_open+0xb4/0x160
[ 3437.462116]        do_sys_openat2+0x91/0xc0
[ 3437.462402]        __x64_sys_openat+0x53/0xa0
[ 3437.462701]        do_syscall_64+0x42/0xf0
[ 3437.462982]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.463359]
               -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}:
[ 3437.463843]        down_write+0x3b/0xc0
[ 3437.464223]        bch2_write_iter+0x5b/0xcc0 [bcachefs]
[ 3437.464493]        vfs_write+0x21b/0x4c0
[ 3437.464653]        ksys_write+0x69/0xf0
[ 3437.464839]        do_syscall_64+0x42/0xf0
[ 3437.465009]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.465231]
               -> #0 (sb_writers#10){.+.+}-{0:0}:
[ 3437.465471]        __lock_acquire+0x1455/0x21b0
[ 3437.465656]        lock_acquire+0xc6/0x2b0
[ 3437.465822]        mnt_want_write+0x46/0x1a0
[ 3437.465996]        filename_create+0x62/0x190
[ 3437.466175]        user_path_create+0x2d/0x50
[ 3437.466352]        bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.466617]        __x64_sys_ioctl+0x93/0xd0
[ 3437.466791]        do_syscall_64+0x42/0xf0
[ 3437.466957]        entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.467180]
               other info that might help us debug this:

[ 3437.469670] 2 locks held by bcachefs/35533:
               other info that might help us debug this:

[ 3437.467507] Chain exists of:
                 sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48

[ 3437.467979]  Possible unsafe locking scenario:

[ 3437.468223]        CPU0                    CPU1
[ 3437.468405]        ----                    ----
[ 3437.468585]   rlock(&type->s_umount_key#48);
[ 3437.468758]                                lock(&c->snapshot_create_lock);
[ 3437.469030]                                lock(&type->s_umount_key#48);
[ 3437.469291]   rlock(sb_writers#10);
[ 3437.469434]
                *** DEADLOCK ***

[ 3437.469670] 2 locks held by bcachefs/35533:
[ 3437.469838]  #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs]
[ 3437.470294]  #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs]
[ 3437.470744]
               stack backtrace:
[ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G            E      6.7.0-rc7-custom+ #85
[ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 3437.471694] Call Trace:
[ 3437.471795]  <TASK>
[ 3437.471884]  dump_stack_lvl+0x57/0x90
[ 3437.472035]  check_noncircular+0x132/0x150
[ 3437.472202]  __lock_acquire+0x1455/0x21b0
[ 3437.472369]  lock_acquire+0xc6/0x2b0
[ 3437.472518]  ? filename_create+0x62/0x190
[ 3437.472683]  ? lock_is_held_type+0x97/0x110
[ 3437.472856]  mnt_want_write+0x46/0x1a0
[ 3437.473025]  ? filename_create+0x62/0x190
[ 3437.473204]  filename_create+0x62/0x190
[ 3437.473380]  user_path_create+0x2d/0x50
[ 3437.473555]  bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs]
[ 3437.473819]  ? lock_acquire+0xc6/0x2b0
[ 3437.474002]  ? __fget_files+0x2a/0x190
[ 3437.474195]  ? __fget_files+0xbc/0x190
[ 3437.474380]  ? lock_release+0xc5/0x270
[ 3437.474567]  ? __x64_sys_ioctl+0x93/0xd0
[ 3437.474764]  ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs]
[ 3437.475090]  __x64_sys_ioctl+0x93/0xd0
[ 3437.475277]  do_syscall_64+0x42/0xf0
[ 3437.475454]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[ 3437.475691] RIP: 0033:0x7f2743c313af
======================================================

In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally
and unlock it at the end of the function. There is a comment
"why do we need this lock?" about the lock coming from
commit 42d23732 ("bcachefs: Snapshot creation, deletion")
The reason is that __bch2_ioctl_subvolume_create() calls
sync_inodes_sb() which enforce locked s_umount to writeback all dirty
nodes before doing snapshot works.

Fix it by read locking s_umount for snapshotting only and unlocking
s_umount after sync_inodes_sb().
Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut.
It should be freed by kvfree not kfree.
Or umount will triger:

[  406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008
[  406.830676 ] #PF: supervisor read access in kernel mode
[  406.831643 ] #PF: error_code(0x0000) - not-present page
[  406.832487 ] PGD 0 P4D 0
[  406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI
[  406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G           OE      6.7.0-rc7-custom+ #90
[  406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[  406.835796 ] RIP: 0010:kfree+0x62/0x140
[  406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6
[  406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286
[  406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4
[  406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000
[  406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001
[  406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80
[  406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000
[  406.840451 ] FS:  00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000
[  406.840851 ] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0
[  406.841464 ] Call Trace:
[  406.841583 ]  <TASK>
[  406.841682 ]  ? __die+0x1f/0x70
[  406.841828 ]  ? page_fault_oops+0x159/0x470
[  406.842014 ]  ? fixup_exception+0x22/0x310
[  406.842198 ]  ? exc_page_fault+0x1ed/0x200
[  406.842382 ]  ? asm_exc_page_fault+0x22/0x30
[  406.842574 ]  ? bch2_fs_release+0x54/0x280 [bcachefs]
[  406.842842 ]  ? kfree+0x62/0x140
[  406.842988 ]  ? kfree+0x104/0x140
[  406.843138 ]  bch2_fs_release+0x54/0x280 [bcachefs]
[  406.843390 ]  kobject_put+0xb7/0x170
[  406.843552 ]  deactivate_locked_super+0x2f/0xa0
[  406.843756 ]  cleanup_mnt+0xba/0x150
[  406.843917 ]  task_work_run+0x59/0xa0
[  406.844083 ]  exit_to_user_mode_prepare+0x197/0x1a0
[  406.844302 ]  syscall_exit_to_user_mode+0x16/0x40
[  406.844510 ]  do_syscall_64+0x4e/0xf0
[  406.844675 ]  entry_SYSCALL_64_after_hwframe+0x6e/0x76
[  406.844907 ] RIP: 0033:0x7f0a2664e4fb
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Fixes: 023f9ac9 bcachefs: Delete dio read alignment check
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

The variable tmp is being assigned a value but it isn't being
read afterwards. The assignment is redundant and so tmp can be
removed.

Cleans up clang scan build warning:
warning: Although the value stored to 'ret' is used in the enclosing
expression, the value is never actually read from 'ret'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

drop_locks_do() should not be used in a fastpath without first trying
the do in nonblocking mode - the unlock and relock will cause excessive
transaction restarts and potentially livelocking with other threads that
are contending for the same locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>