- 02 Nov, 2016 5 commits
-
-
Bart Van Assche authored
The meaning of the BLK_MQ_S_STOPPED flag is "do not call .queue_rq()". Hence modify blk_mq_make_request() such that requests are queued instead of issued if a queue has been stopped. Reported-by:
Ming Lei <tom.leiming@gmail.com> Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Cc: <stable@vger.kernel.org> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Kent Overstreet authored
This is a helper that pins down a range from an iov_iter and adds it to a bio without requiring a separate memory allocation for the page array. It will be used for upcoming direct I/O implementations for block devices and iomap based file systems. Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> [hch: ported to the iov_iter interface, renamed and added comments. All blame should be directed to me and all fame should go to Kent after this!] Signed-off-by:
-
Jens Axboe authored
If we're doing background type writes, then use the appropriate background write flags for that. Signed-off-by:
-
Jens Axboe authored
Add wbc_to_write_flags(), which returns the write modifier flags to use, based on a struct writeback_control. No functional changes in this patch, but it prepares us for factoring other wbc fields for write type. Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
Jens Axboe authored
This adds a new request flag, REQ_BACKGROUND, that callers can use to tell the block layer that this is background (non-urgent) IO. Signed-off-by:
-
- 01 Nov, 2016 16 commits
-
-
Christoph Hellwig authored
Now that we have a separate header for struct bio_vec there is absolutely no excuse for including this header from non-block I/O code. Signed-off-by:
-
Christoph Hellwig authored
It's only needed for the CONFIG_SWAP-only use of bio_end_io_t. Because CONFIG_SWAP implies CONFIG_BLOCK this will allow to drop some ifdefs in blk_types.h. Instead we'll need to add a few explicit includes that were implicit before, though. Signed-off-by:
-
Christoph Hellwig authored
The file only needs the struct bvec_iter delcaration, which is available from bvec.h. Signed-off-by:
-
Christoph Hellwig authored
No need for it - we only use struct bio_vec in prototypes and already have forward declarations for it. Signed-off-by:
-
Christoph Hellwig authored
Nothing in fs.h should require blk_types.h to be included. Signed-off-by:
-
Christoph Hellwig authored
This is where all the other bio operations live, so users must include bio.h anyway. Signed-off-by:
-
Christoph Hellwig authored
Move READ and WRITE to kernel.h and don't define them in terms of block layer ops; they are our generic data direction indicators these days and have no more resemblance with the block layer ops. Signed-off-by:
-
Christoph Hellwig authored
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags directly. Where applicable this also drops usage of the bio_set_op_attrs wrapper. Signed-off-by:
-
Christoph Hellwig authored
Noidle should be the default for writes as seen by all the compounds definitions in fs.h using it. In fact only direct I/O really should be using NODILE, so turn the whole flag around to get the defaults right, which will make our life much easier especially onces the WRITE_* defines go away. This assumes all the existing "raw" users of REQ_SYNC for writes want noidle behavior, which seems to be spot on from a quick audit. Signed-off-by:
-
Christoph Hellwig authored
Instead of requiring everyone to specify the REQ_SYNC flag aѕ well. Signed-off-by:
-
Christoph Hellwig authored
Reads are synchronous per definition, don't add another flag for it. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
(and remove one layer of masking for the op_is_write call next to it). Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
- 28 Oct, 2016 9 commits
-
-
Christoph Hellwig authored
Currently the block layer op_is_write, bio_data_dir and rq_data_dir helper treat every operation that is not a READ as a data out operation. This worked surprisingly long, but the new REQ_OP_ZONE_REPORT operation actually adds a second operation that reads data from the device. Surprisingly nothing critical relied on this direction, but this might be a good opportunity to properly fix this issue up. We take a little inspiration and use the least significant bit of the operation number to encode the data direction, which just requires us to renumber the operations to fix this scheme. Signed-off-by:
Shaun Tancheff <shaun.tancheff@seagate.com> Signed-off-by:
-
Christoph Hellwig authored
Now that we don't need the common flags to overflow outside the range of a 32-bit type we can encode them the same way for both the bio and request fields. This in addition allows us to place the operation first (and make some room for more ops while we're at it) and to stop having to shift around the operation values. In addition this allows passing around only one value in the block layer instead of two (and eventuall also in the file systems, but we can do that later) and thus clean up a lot of code. Last but not least this allows decreasing the size of the cmd_flags field in struct request to 32-bits. Various functions passing this value could also be updated, but I'd like to avoid the churn for now. Signed-off-by:
-
Christoph Hellwig authored
A lot of the REQ_* flags are only used on struct requests, and only of use to the block layer and a few drivers that dig into struct request internals. This patch adds a new req_flags_t rq_flags field to struct request for them, and thus dramatically shrinks the number of common requests. It also removes the unfortunate situation where we have to fit the fields from the same enum into 32 bits for struct bio and 64 bits for struct request. Signed-off-by:
-
Christoph Hellwig authored
It's the last bio-only REQ_* flag, and we have space for it in the bio bi_flags field. Signed-off-by:
-
Christoph Hellwig authored
The information that am I/O is a read-ahead can be useful for drivers. In fact the NVMe driver already checks it, even if it won't ever be set at the moment. Signed-off-by:
-
Christoph Hellwig authored
So move it into the common setion of the request flags. Signed-off-by:
-
Christoph Hellwig authored
With the addition of the zoned operations the tests in this function became incorrect. But I think it's much better to just open code the allow operations in the only caller anyway. Signed-off-by:
-
Jens Axboe authored
We can just use struct blk_mq_alloc_data - it has a few more members, but we allocate it further down the stack anyway. So this cleans up the code, and reduces the stack overhead a bit. Signed-off-by: -
Jens Axboe authored
If we end up sleeping due to running out of requests, we should update the hardware and software queues in the map ctx structure. Otherwise we could end up having rq->mq_ctx point to the pre-sleep context, and risk corrupting ctx->rq_list since we'll be grabbing the wrong lock when inserting the request. Reported-by:
Dave Jones <davej@codemonkey.org.uk> Reported-by:
Chris Mason <clm@fb.com> Tested-by:
-
- 25 Oct, 2016 4 commits
-
-
Mike Snitzer authored
Discontinue having the brd driver destructively free all pages in the ramdisk in response to the BLKFLSBUF ioctl. Doing so allows a BLKFLSBUF ioctl issued to a logical partition to destroy pages of the parent brd device (and all other partitions of that brd device). This change breaks compatibility - but in this case the compatibility breaks more than it helps. Reported-by:
Mikulas Patocka <mpatocka@redhat.com> Suggested-by:
Christoph Hellwig <hch@infradead.org> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Jan Kara authored
Currently rd_size was int which lead to overflow and bogus device size once the requested ramdisk size was 1 TB or more. Although these days ramdisks with 1 TB size are mostly a mistake, the days when they are useful are not far. Reported-by:
-
Arnd Bergmann authored
If sd_zbc_report_zones fails, the check for 'zone_blocks == 0' later in the function accesses uninitialized data: drivers/scsi/sd_zbc.c: In function ‘sd_zbc_read_zones’: drivers/scsi/sd_zbc.c:520:7: error: ‘zone_blocks’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This sets it to zero, which has the desired effect of leaving the sd_zbc_read_zones successfully with sdkp->zone_blocks = 0. Fixes: 89d94756 ("sd: Implement support for ZBC devices") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
-
Arnd Bergmann authored
The blkdev_report_zones produces a harmless warning when -Wmaybe-uninitialized is set, after gcc gets a little confused about the multiple 'goto' here: block/blk-zoned.c: In function 'blkdev_report_zones': block/blk-zoned.c:188:13: error: 'nz' may be used uninitialized in this function [-Werror=maybe-uninitialized] Moving the assignment to nr_zones makes this a little simpler while also avoiding the warning reliably. I'm removing the extraneous initialization of 'int ret' in the same patch, as that is semi-related and could cause an uninitialized use of that variable to not produce a warning. Fixes: 6a0cb1bc ("block: Implement support for zoned block devices") Signed-off-by:
-
- 19 Oct, 2016 1 commit
-
-
Hannes Reinecke authored
Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by:
Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by:
Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
- 18 Oct, 2016 5 commits
-
-
Shaun Tancheff authored
Adds the new BLKREPORTZONE and BLKRESETZONE ioctls for respectively obtaining the zone configuration of a zoned block device and resetting the write pointer of sequential zones of a zoned block device. The BLKREPORTZONE ioctl maps directly to a single call of the function blkdev_report_zones. The zone information result is passed as an array of struct blk_zone identical to the structure used internally for processing the REQ_OP_ZONE_REPORT operation. The BLKRESETZONE ioctl maps to a single call of the blkdev_reset_zones function. Signed-off-by:
-
Hannes Reinecke authored
Implement zoned block device zone information reporting and reset. Zone information are reported as struct blk_zone. This implementation does not differentiate between host-aware and host-managed device models and is valid for both. Two functions are provided: blkdev_report_zones for discovering the zone configuration of a zoned block device, and blkdev_reset_zones for resetting the write pointer of sequential zones. The helper function blk_queue_zone_size and bdev_zone_size are also provided for, as the name suggest, obtaining the zone size (in 512B sectors) of the zones of the device. Signed-off-by:
-
Shaun Tancheff authored
Define REQ_OP_ZONE_REPORT and REQ_OP_ZONE_RESET for handling zones of host-managed and host-aware zoned block devices. With with these two new operations, the total number of operations defined reaches 8 and still fits with the 3 bits definition of REQ_OP_BITS. Signed-off-by:
-
Hannes Reinecke authored
Signed-off-by:
-
Hannes Reinecke authored
The queue limits already have a 'chunk_sectors' setting, so we should be presenting it via sysfs. Signed-off-by:
-
