- 04 Aug, 2021 4 commits
-
-
Petko Manolov authored
These are now deemed redundant. Signed-off-by:
Petko Manolov <petkan@nucleusys.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petko Manolov authored
Certain call sites of get_geristers() did not do proper error handling. This could be a problem as get_geristers() typically return the data via pointer to a buffer. If an error occurred the code is carelessly manipulating the wrong data. Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
-
Leon Romanovsky authored
Devlink trap group is registered but not released in error flow, add the missing devlink_trap_groups_unregister() call. Fixes: 0a9003f4 ("net: marvell: prestera: devlink: add traps/groups implementation") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
-
Yunsheng Lin authored
According to comment in qdisc_alloc(), sch->seqlock's lockdep class key should be set to qdisc_tx_busylock, due to possible type error, sch->busylock's lockdep class key is set to qdisc_tx_busylock, which is duplicated because sch->busylock's lockdep class key is already set in qdisc_alloc(). So fix it by replacing sch->busylock with sch->seqlock. Fixes: 96009c7d ("sched: replace __QDISC_STATE_RUNNING bit with a spin lock") Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
- 03 Aug, 2021 10 commits
-
-
Oleksij Rempel authored
In case of this switch we work with 32bit registers on top of 16bit bus. Some registers (for example access to forwarding database) have trigger bit on the first 16bit half of request and the result + configuration of request in the second half. Without this patch, we would trigger database operation and overwrite result in one run. To make it work properly, we should do the second part of transfer before the first one is done. So far, this rule seems to work for all registers on this switch. Fixes: ec6698c2 ("net: dsa: add support for Atheros AR9331 built-in switch") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20210803063746.3600-1-o.rempel@pengutronix.deSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Harshavardhan Unnibhavi authored
The original implementation of the virtio-vsock driver does not handle a VIRTIO_VSOCK_OP_CREDIT_REQUEST as required by the virtio-vsock specification. The vsock device emulated by vhost-vsock and the virtio-vsock driver never uses this request, which was probably why nobody noticed it. However, another implementation of the device may use this request type. Hence, this commit introduces a way to handle an explicit credit request by responding with a corresponding credit update as required by the virtio-vsock specification. Fixes: 06a8fc78 ("VSOCK: Introduce virtio_vsock_common.ko") Signed-off-by:
Harshavardhan Unnibhavi <harshanavkis@gmail.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210802173506.2383-1-harshanavkis@gmail.comSigned-off-by:
-
Geliang Tang authored
kfree_rcu() had been removed from pm_netlink.c, so this rcu field in struct mptcp_pm_addr_entry became useless. Let's drop it. Signed-off-by:
Geliang Tang <geliangtang@gmail.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20210802231914.54709-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Antoine Tenart authored
The patch fixing the returned value of ip6_skb_dst_mtu (int -> unsigned int) was rebased between its initial review and the version applied. In the meantime fade5641 was applied, which added a new variable (int) used as the returned value. This lead to a mismatch between the function prototype and the variable used as the return value. Fixes: 40fc3054 ("net: ipv6: fix return value of ip6_skb_dst_mtu") Cc: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Fei Qin authored
Pauseframe control is set to symmetric mode by default on the NFP. Pause frames can not be configured through ethtool now, but ethtool can report the supported mode. Fixes: 265aeb51 ("nfp: add support for .get_link_ksettings()") Signed-off-by:
Fei Qin <fei.qin@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Bijie Xu authored
Provide missing kdoc of fields of struct tcf_pkt_info and tcf_ematch_ops. Found using ./scripts/kernel-doc -none -Werror include/net/pkt_cls.h Signed-off-by:
Bijie Xu <bijie.xu@corigine.com> Signed-off-by:
-
Bijie Xu authored
Correct mismatch between the name of flow_offload_has_one_action() and its kdoc entry. Found using ./scripts/kernel-doc -Werror -none include/net/flow_offload.h Signed-off-by:
-
Arnd Bergmann authored
I saw the build failure that was fixed in commit 6387f65e ("net: sparx5: fix compiletime_assert for GCC 4.9") and noticed another issue that was introduced in the same patch: Using GENMASK() to create a 64-bit mask does not work on 32-bit architectures. This probably won't ever happen on this driver since it's specific to a 64-bit SoC, but it's better to write it portably, so use GENMASK_ULL() instead. Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Xin Long authored
In commit 58acd100 ("sctp: update active_key for asoc when old key is being replaced"), sctp_auth_asoc_init_active_key() is called to update the active_key right after the old key is deleted and before the new key is added, and it caused that the active_key could be found with the key_id. In Ying Xu's testing, the BUG_ON in sctp_auth_asoc_init_active_key() was triggered: [ ] kernel BUG at net/sctp/auth.c:416! [ ] RIP: 0010:sctp_auth_asoc_init_active_key.part.8+0xe7/0xf0 [sctp] [ ] Call Trace: [ ] sctp_auth_set_key+0x16d/0x1b0 [sctp] [ ] sctp_setsockopt.part.33+0x1ba9/0x2bd0 [sctp] [ ] __sys_setsockopt+0xd6/0x1d0 [ ] __x64_sys_setsockopt+0x20/0x30 [ ] do_syscall_64+0x5b/0x1a0 So fix it by moving the active_key update after sh_keys is added. Fixes: 58acd100 ("sctp: update active_key for asoc when old key is being replaced") Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
David S. Miller authored
Signed-off-by:
-
- 02 Aug, 2021 18 commits
-
-
Vladimir Oltean authored
Currently it is possible to add broken extern_learn FDB entries to the bridge in two ways: 1. Entries pointing towards the bridge device that are not local/permanent: ip link add br0 type bridge bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static 2. Entries pointing towards the bridge device or towards a port that are marked as local/permanent, however the bridge does not process the 'permanent' bit in any way, therefore they are recorded as though they aren't permanent: ip link add br0 type bridge bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent Since commit 52e4bec1 ("net: bridge: switchdev: treat local FDBs the same as entries towards the bridge"), these incorrect FDB entries can even trigger NULL pointer dereferences inside the kernel. This is because that commit made the assumption that all FDB entries that are not local/permanent have a valid destination port. For context, local / permanent FDB entries either have fdb->dst == NULL, and these point towards the bridge device and are therefore local and not to be used for forwarding, or have fdb->dst == a net_bridge_port structure (but are to be treated in the same way, i.e. not for forwarding). That assumption _is_ correct as long as things are working correctly in the bridge driver, i.e. we cannot logically have fdb->dst == NULL under any circumstance for FDB entries that are not local. However, the extern_learn code path where FDB entries are managed by a user space controller show that it is possible for the bridge kernel driver to misinterpret the NUD flags of an entry transmitted by user space, and end up having fdb->dst == NULL while not being a local entry. This is invalid and should be rejected. Before, the two commands listed above both crashed the kernel in this check from br_switchdev_fdb_notify: struct net_device *dev = info.is_local ? br->dev : dst->dev; info.is_local == false, dst == NULL. After this patch, the invalid entry added by the first command is rejected: ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn static; ip link del br0 Error: bridge: FDB entry towards bridge must be permanent. and the valid entry added by the second command is properly treated as a local address and does not crash br_switchdev_fdb_notify anymore: ip link add br0 type bridge && bridge fdb add 00:01:02:03:04:05 dev br0 self extern_learn permanent; ip link del br0 Fixes: eb100e0e ("net: bridge: allow to add externally learned entries from user-space") Reported-by: syzbot+9ba1174359adba5a5b7c@syzkaller.appspotmail.com Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210801231730.7493-1-vladimir.oltean@nxp.comSigned-off-by:
-
Jakub Kicinski authored
This reverts commit 40e15940. Looks like this commit breaks the build for me. Signed-off-by:
-
Jakub Kicinski authored
IF_OPER_TESTING is in fact used today. Signed-off-by:
-
Jakub Kicinski authored
TVL -> TLV Signed-off-by:
-
Jakub Kicinski authored
Stephen reports sparx5 broke GCC 4.9 build. Move the compiletime_assert() out of the static function. Compile-tested only, no object code changes. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Fixes: f3cad261 ("net: sparx5: add hostmode with phylink support") Signed-off-by:
-
Wang Hai authored
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Steve Bennett authored
The logic for discerning between KSZ8051 and KSZ87XX PHYs is incorrect such that the that KSZ87XX switch is not identified correctly. ksz8051_ksz8795_match_phy_device() uses the parameter ksz_phy_id to discriminate whether it was called from ksz8051_match_phy_device() or from ksz8795_match_phy_device() but since PHY_ID_KSZ87XX is the same value as PHY_ID_KSZ8051, this doesn't work. Instead use a bool to discriminate the caller. Without this patch, the KSZ8795 switch port identifies as: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Generic PHY] With the patch, it identifies correctly: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Micrel KSZ87XX Switch] Fixes: 8b95599c ("net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs") Signed-off-by:
Steve Bennett <steveb@workware.net.au> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== FDB fixes for NXP SJA1105 I have some upcoming patches that make heavy use of statically installed FDB entries, and when testing them on SJA1105P/Q/R/S and SJA1110, it became clear that these switches do not behave reliably at all. - On SJA1110, a static FDB entry cannot be installed at all - On SJA1105P/Q/R/S, it is very picky about the inner/outer VLAN type - Dynamically learned entries will make us not install static ones, or even if we do, they might not take effect Patch 5/6 has a conflict with net-next (sorry), the commit message of that patch describes how to deal with it. Thanks. ==================== Signed-off-by: -
Vladimir Oltean authored
On SJA1105P/Q/R/S and SJA1110, the L2 Lookup Table entries contain a maskable "inner/outer tag" bit which means: - when set to 1: match single-outer and double tagged frames - when set to 0: match untagged and single-inner tagged frames - when masked off: match all frames regardless of the type of tag This driver does not make any meaningful distinction between inner tags (matches on TPID) and outer tags (matches on TPID2). In fact, all VLAN table entries are installed as SJA1110_VLAN_D_TAG, which means that they match on both inner and outer tags. So it does not make sense that we install FDB entries with the IOTAG bit set to 1. In VLAN-unaware mode, we set both TPID and TPID2 to 0xdadb, so the switch will see frames as outer-tagged or double-tagged (never inner). So the FDB entries will match if IOTAG is set to 1. In VLAN-aware mode, we set TPID to 0x8100 and TPID2 to 0x88a8. So the switch will see untagged and 802.1Q-tagged packets as inner-tagged, and 802.1ad-tagged packets as outer-tagged. So untagged and 802.1Q-tagged packets will not match FDB entries if IOTAG is set to 1, but 802.1ad tagged packets will. Strange. To fix this, simply mask off the IOTAG bit from FDB entries, and make them match regardless of whether the VLAN tag is inner or outer. Fixes: 1da73821 ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by:
-
Vladimir Oltean authored
Similar but not quite the same with what was done in commit b11f0a4c ("net: dsa: sja1105: be stateless when installing FDB entries") for SJA1105E/T, it is desirable to drop the priv->vlan_aware check and simply go ahead and install FDB entries in the VLAN that was given by the bridge. As opposed to SJA1105E/T, in SJA1105P/Q/R/S and SJA1110, the FDB is a maskable TCAM, and we are installing VLAN-unaware FDB entries with the VLAN ID masked off. However, such FDB entries might completely obscure VLAN-aware entries where the VLAN ID is included in the search mask, because the switch looks up the FDB from left to right and picks the first entry which results in a masked match. So it depends on whether the bridge installs first the VLAN-unaware or the VLAN-aware FDB entries. Anyway, if we had a VLAN-unaware FDB entry towards one set of DESTPORTS and a VLAN-aware one towards other set of DESTPORTS, the result is that the packets in VLAN-aware mode will be forwarded towards the DESTPORTS specified by the VLAN-unaware entry. To solve this, simply do not use the masked matching ability of the FDB for VLAN ID, and always match precisely on it. In VLAN-unaware mode, we configure the switch for shared VLAN learning, so the VLAN ID will be ignored anyway during lookup, so it is redundant to mask it off in the TCAM. This patch conflicts with net-next commit 0fac6aa0 ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") which changed this line: if (priv->vlan_state != SJA1105_VLAN_UNAWARE) { into: if (priv->vlan_aware) { When merging with net-next, the lines added by this patch should take precedence in the conflict resolution (i.e. the "if" condition should be deleted in both cases). Fixes: 1da73821 ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by:
-
Vladimir Oltean authored
Currently, when sja1105pqrs_fdb_add() is called for a host-joined IPv6 MDB entry such as 33:33:00:00:00:6a, the search for that address will return the FDB entry for SJA1105_UNKNOWN_MULTICAST, which has a destination MAC of 01:00:00:00:00:00 and a mask of 01:00:00:00:00:00. It returns that entry because, well, it matches, in the sense that unknown multicast is supposed by design to match it... But the issue is that we then proceed to overwrite this entry with the one for our precise host-joined multicast address, and the unknown multicast entry is no longer there - unknown multicast is now flooded to the same group of ports as broadcast, which does not look up the FDB. To solve this problem, we should ignore searches that return the unknown multicast address as the match, and treat them as "no match" which will result in the entry being installed to hardware. For this to work properly, we need to put the result of the FDB search in a temporary variable in order to avoid overwriting the l2_lookup entry we want to program. The l2_lookup entry returned by the search might not have the same set of DESTPORTS and not even the same MACADDR as the entry we're trying to add. Fixes: 4d942354 ("net: dsa: sja1105: offload bridge port flags to device") Signed-off-by:
-
Vladimir Oltean authored
The procedure to add a static FDB entry in sja1105 is concurrent with dynamic learning performed on all bridge ports and the CPU port. The switch looks up the FDB from left to right, and also learns dynamically from left to right, so it is possible that between the moment when we pick up a free slot to install an FDB entry, another slot to the left of that one becomes free due to an address ageing out, and that other slot is then immediately used by the switch to learn dynamically the same address as we're trying to add statically. The result is that we succeeded to add our static FDB entry, but it is being shadowed by a dynamic FDB entry to its left, and the switch will behave as if our static FDB entry did not exist. We cannot really prevent this from happening unless we make the entire process to add a static FDB entry a huge critical section where address learning is temporarily disabled on _all_ ports, and then re-enabled according to the configuration done by sja1105_port_set_learning. However, that is kind of disruptive for the operation of the network. What we can do alternatively is to simply read back the FDB for dynamic entries located before our newly added static one, and delete them. This will guarantee that our static FDB entry is now operational. It will still not guarantee that there aren't dynamic FDB entries to the _right_ of that static FDB entry, but at least those entries will age out by themselves since they aren't hit, and won't bother anyone. Fixes: 291d1e72 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821 ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by:
-
Vladimir Oltean authored
The SJA1105 switch family leaves it up to software to decide where within the FDB to install a static entry, and to concatenate destination ports for already existing entries (the FDB is also used for multicast entries), it is not as simple as just saying "please add this entry". This means we first need to search for an existing FDB entry before adding a new one. The driver currently manages to fool itself into thinking that if an FDB entry already exists, there is nothing to be done. But that FDB entry might be dynamically learned, case in which it should be replaced with a static entry, but instead it is left alone. This patch checks the LOCKEDS ("locked/static") bit from found FDB entries, and lets the code "goto skip_finding_an_index;" if the FDB entry was not static. So we also need to move the place where we set LOCKEDS = true, to cover the new case where a dynamic FDB entry existed but was dynamic. Fixes: 291d1e72 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821 ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: -
Vladimir Oltean authored
The blamed commit made FDB access on SJA1110 functional only as far as dumping the existing entries goes, but anything having to do with an entry's index (adding, deleting) is still broken. There are in fact 2 problems, all caused by improperly inheriting the code from SJA1105P/Q/R/S: - An entry size is SJA1110_SIZE_L2_LOOKUP_ENTRY (24) bytes and not SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY (20) bytes - The "index" field within an FDB entry is at bits 10:1 for SJA1110 and not 15:6 as in SJA1105P/Q/R/S This patch moves the packing function for the cmd->index outside of sja1105pqrs_common_l2_lookup_cmd_packing() and into the device specific functions sja1105pqrs_l2_lookup_cmd_packing and sja1110_l2_lookup_cmd_packing. Fixes: 74e7feff ("net: dsa: sja1105: fix dynamic access to L2 Address Lookup table for SJA1110") Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
Yannick Vignon authored
Commit 13511704 ("net: taprio offload: enforce qdisc to netdev queue mapping") resulted in duplicate entries in the qdisc hash. While this did not impact the overall operation of the qdisc and taprio code paths, it did result in an infinite loop when dumping the qdisc properties, at least on one target (NXP LS1028 ARDB). Removing the duplicate call to qdisc_hash_add() solves the problem. Fixes: 13511704 ("net: taprio offload: enforce qdisc to netdev queue mapping") Signed-off-by:
Yannick Vignon <yannick.vignon@nxp.com> Signed-off-by:
-
Jakub Sitnicki authored
GSO expects inner transport header offset to be valid when skb->encapsulation flag is set. GSO uses this value to calculate the length of an individual segment of a GSO packet in skb_gso_transport_seglen(). However, tcp/udp gro_complete callbacks don't update the skb->inner_transport_header when processing an encapsulated TCP/UDP segment. As a result a GRO skb has ->inner_transport_header set to a value carried over from earlier skb processing. This can have mild to tragic consequences. From miscalculating the GSO segment length to triggering a page fault [1], when trying to read TCP/UDP header at an address past the skb->data page. The latter scenario leads to an oops report like so: BUG: unable to handle page fault for address: ffff9fa7ec00d008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 123f201067 P4D 123f201067 PUD 123f209067 PMD 0 Oops: 0000 [#1] SMP NOPTI CPU: 44 PID: 0 Comm: swapper/44 Not tainted 5.4.53-cloudflare-2020.7.21 #1 Hardware name: HYVE EDGE-METAL-GEN10/HS-1811DLite1, BIOS V2.15 02/21/2020 RIP: 0010:skb_gso_transport_seglen+0x44/0xa0 Code: c0 41 83 e0 11 f6 87 81 00 00 00 20 74 30 0f b7 87 aa 00 00 00 0f [...] RSP: 0018:ffffad8640bacbb8 EFLAGS: 00010202 RAX: 000000000000feda RBX: ffff9fcc8d31bc00 RCX: ffff9fa7ec00cffc RDX: ffff9fa7ebffdec0 RSI: 000000000000feda RDI: 0000000000000122 RBP: 00000000000005c4 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9fe588ae3800 R11: ffff9fe011fc92f0 R12: ffff9fcc8d31bc00 R13: ffff9fe0119d4300 R14: 00000000000005c4 R15: ffff9fba57d70900 FS: 0000000000000000(0000) GS:ffff9fe68df00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9fa7ec00d008 CR3: 0000003e99b1c000 CR4: 0000000000340ee0 Call Trace: <IRQ> skb_gso_validate_network_len+0x11/0x70 __ip_finish_output+0x109/0x1c0 ip_sublist_rcv_finish+0x57/0x70 ip_sublist_rcv+0x2aa/0x2d0 ? ip_rcv_finish_core.constprop.0+0x390/0x390 ip_list_rcv+0x12b/0x14f __netif_receive_skb_list_core+0x2a9/0x2d0 netif_receive_skb_list_internal+0x1b5/0x2e0 napi_complete_done+0x93/0x140 veth_poll+0xc0/0x19f [veth] ? mlx5e_napi_poll+0x221/0x610 [mlx5_core] net_rx_action+0x1f8/0x790 __do_softirq+0xe1/0x2bf irq_exit+0x8e/0xc0 do_IRQ+0x58/0xe0 common_interrupt+0xf/0xf </IRQ> The bug can be observed in a simple setup where we send IP/GRE/IP/TCP packets into a netns over a veth pair. Inside the netns, packets are forwarded to dummy device: trafgen -> [veth A]--[veth B] -forward-> [dummy] For veth B to GRO aggregate packets on receive, it needs to have an XDP program attached (for example, a trivial XDP_PASS). Additionally, for UDP, we need to enable GSO_UDP_L4 feature on the device: ip netns exec A ethtool -K AB rx-udp-gro-forwarding on The last component is an artificial delay to increase the chances of GRO batching happening: ip netns exec A tc qdisc add dev AB root \ netem delay 200us slot 5ms 10ms packets 2 bytes 64k With such a setup in place, the bug can be observed by tracing the skb outer and inner offsets when GSO skb is transmitted from the dummy device: tcp: FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE ip_finish_output dumB 2830 270 290 1 294 254 1383 (tcpv4,gre,) ^^^ udp: FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE ip_finish_output dumB 2818 270 290 1 294 254 1383 (gre,udp_l4,) ^^^ Fix it by updating the inner transport header offset in tcp/udp gro_complete callbacks, similar to how {inet,ipv6}_gro_complete callbacks update the inner network header offset, when skb->encapsulation flag is set. [1] https://lore.kernel.org/netdev/CAKxSbF01cLpZem2GFaUaifh0S-5WYViZemTicAg7FCHOnh6kug@mail.gmail.com/ Fixes: bf296b12 ("tcp: Add GRO support") Fixes: f993bc25 ("net: core: handle encapsulation offloads when computing segment lengths") Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.") Reported-by:Alex Forster <aforster@cloudflare.com> Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
-
Prabhakar Kushwaha authored
A crash has been observed if rmmod is done while automatic debug collection in progress. It is due to a race condition between both of them. To fix stop the sp_task during unload to avoid running qede_sp_task even if they are schedule during removal process. Signed-off-by:
Alok Prasad <palok@marvell.com> Signed-off-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by:
-
- 30 Jul, 2021 8 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi (mac80211) and netfilter trees. Current release - regressions: - mac80211: fix starting aggregation sessions on mesh interfaces Current release - new code bugs: - sctp: send pmtu probe only if packet loss in Search Complete state - bnxt_en: add missing periodic PHC overflow check - devlink: fix phys_port_name of virtual port and merge error - hns3: change the method of obtaining default ptp cycle - can: mcba_usb_start(): add missing urb->transfer_dma initialization Previous releases - regressions: - set true network header for ECN decapsulation - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and LRO - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811 PHY - sctp: fix return value check in __sctp_rcv_asconf_lookup Previous releases - always broken: - bpf: - more spectre corner case fixes, introduce a BPF nospec instruction for mitigating Spectre v4 - fix OOB read when printing XDP link fdinfo - sockmap: fix cleanup related races - mac80211: fix enabling 4-address mode on a sta vif after assoc - can: - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF - j1939: j1939_session_deactivate(): clarify lifetime of session object, avoid UAF - fix number of identical memory leaks in USB drivers - tipc: - do not blindly write skb_shinfo frags when doing decryption - fix sleeping in tipc accept routine" * tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) gve: Update MAINTAINERS list can: esd_usb2: fix memory leak can: ems_usb: fix memory leak can: usb_8dev: fix memory leak can: mcba_usb_start(): add missing urb->transfer_dma initialization can: hi311x: fix a signedness bug in hi3110_cmd() MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver bpf: Fix leakage due to insufficient speculative store bypass mitigation bpf: Introduce BPF nospec instruction for mitigating Spectre v4 sis900: Fix missing pci_disable_device() in probe and remove net: let flow have same hash in two directions nfc: nfcsim: fix use after free during module unload tulip: windbond-840: Fix missing pci_disable_device() in probe and remove sctp: fix return value check in __sctp_rcv_asconf_lookup nfc: s3fwrn5: fix undefined parameter values in dev_err() net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32 net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev() net/mlx5: Unload device upon firmware fatal error net/mlx5e: Fix page allocation failure for ptp-RQ over SF net/mlx5e: Fix page allocation failure for trap-RQ over SF ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These revert a recent IRQ resources handling modification that turned out to be problematic, fix suspend-to-idle handling on AMD platforms to take upcoming systems into account properly and fix the retrieval of the DPTF attributes of the PCH FIVR. Specifics: - Revert recent change of the ACPI IRQ resources handling that attempted to improve the ACPI IRQ override selection logic, but introduced serious regressions on some systems (Hui Wang). - Fix up quirks for AMD platforms in the suspend-to-idle support code so as to take upcoming systems using uPEP HID AMDI007 into account as appropriate (Mario Limonciello). - Fix the code retrieving DPTF attributes of the PCH FIVR so that it agrees on the return data type with the ACPI control method evaluated for this purpose (Srinivas Pandruvada)" * tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: DPTF: Fix reading of attributes Revert "ACPI: resources: Add checks for ACPI IRQ override" ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007 -
Linus Torvalds authored
Since commit 1b6b26ae ("pipe: fix and clarify pipe write wakeup logic") we have sanitized the pipe write logic, and would only try to wake up readers if they needed it. In particular, if the pipe already had data in it before the write, there was no point in trying to wake up a reader, since any existing readers must have been aware of the pre-existing data already. Doing extraneous wakeups will only cause potential thundering herd problems. However, it turns out that some Android libraries have misused the EPOLL interface, and expected "edge triggered" be to "any new write will trigger it". Even if there was no edge in sight. Quoting Sandeep Patil: "The commit 1b6b26ae ('pipe: fix and clarify pipe write wakeup logic') changed pipe write logic to wakeup readers only if the pipe was empty at the time of write. However, there are libraries that relied upon the older behavior for notification scheme similar to what's described in [1] One such library 'realm-core'[2] is used by numerous Android applications. The library uses a similar notification mechanism as GNU Make but it never drains the pipe until it is full. When Android moved to v5.10 kernel, all applications using this library stopped working. The library has since been fixed[3] but it will be a while before all applications incorporate the updated library" Our regression rule for the kernel is that if applications break from new behavior, it's a regression, even if it was because the application did something patently wrong. Also note the original report [4] by Michal Kerrisk about a test for this epoll behavior - but at that point we didn't know of any actual broken use case. So add the extraneous wakeup, to approximate the old behavior. [ I say "approximate", because the exact old behavior was to do a wakeup not for each write(), but for each pipe buffer chunk that was filled in. The behavior introduced by this change is not that - this is just "every write will cause a wakeup, whether necessary or not", which seems to be sufficient for the broken library use. ] It's worth noting that this adds the extraneous wakeup only for the write side, while the read side still considers the "edge" to be purely about reading enough from the pipe to allow further writes. See commit f467a6a6 ("pipe: fix and clarify pipe read wakeup logic") for the pipe read case, which remains that "only wake up if the pipe was full, and we read something from it". Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1] Link: https://github.com/realm/realm-core [2] Link: https://github.com/realm/realm-core/issues/4666 [3] Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4] Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/Reported-by:
Sandeep Patil <sspatil@android.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael J. Wysocki authored
* acpi-resources: Revert "ACPI: resources: Add checks for ACPI IRQ override" * acpi-dptf: ACPI: DPTF: Fix reading of attributes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - gendisk freeing fix (Christoph) - blk-iocost wake ordering fix (Tejun) - tag allocation error handling fix (John) - loop locking fix. While this isn't the prettiest fix in the world, nobody has any good alternatives for 5.14. Something to likely revisit for 5.15. (Tetsuo) * tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block: block: delay freeing the gendisk blk-iocost: fix operation ordering in iocg_wake_fn() blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling loop: reintroduce global lock for safe loop_validate_file() traversal
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - A fix for block backed reissue (me) - Reissue context hardening (me) - Async link locking fix (Pavel) * tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block: io_uring: fix poll requests leaking second poll entries io_uring: don't block level reissue off completion path io_uring: always reissue from task_work context io_uring: fix race in unified task_work running io_uring: fix io_prep_async_link locking
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull libata fixlets from Jens Axboe: - A fix for PIO highmem (Christoph) - Kill HAVE_IDE as it's now unused (Lukas) * tag 'libata-5.14-2021-07-30' of git://git.kernel.dk/linux-block: arch: Kconfig: clean up obsolete use of HAVE_IDE libata: fix ata_pio_sector for CONFIG_HIGHMEM
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fix -Warray-bounds warning, to help external patchset to make it default treewide - fix writeable device accounting (syzbot report) - fix fsync and log replay after a rename and inode eviction - fix potentially lost error code when submitting multiple bios for compressed range * tag 'for-5.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: calculate number of eb pages properly in csum_tree_block btrfs: fix rw device counting in __btrfs_free_extra_devids btrfs: fix lost inode on log replay after mix of fsync, rename and inode eviction btrfs: mark compressed range uptodate only if all bio succeed
-
