Commits · bc677fff1cde38ce8e14d6a2cb703a9fb134ab98 · Kirill Smelkov / linux

19 Jun, 2013 11 commits

[media] em28xx: move snapshot button bit definition for reg 0x0C from em28xx-input.c to em28xx.h · bc677fff
Frank Schaefer authored Jun 03, 2013
```
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
```
bc677fff

[media] em28xx: improve em2820-em2873/83 GPIO port register definitions and descriptions · c074fc4c

Frank Schaefer authored Jun 03, 2013

- add definition for GPIO register 0x09 (reading/input)
- extend the information the chip variants that support GPIO registers 0x08/0x09
- rename EM28XX_R08_GPIO to EM2820_R08_GPIO_CTRL
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

c074fc4c

[media] em28xx: extend GPIO register definitions for the em25xx, em276x/7x/8x, em2874/174/84 · 907d109b

Frank Schaefer authored Jun 03, 2013

The em25xx/em276x/7x/8x provides 4 GPIO register sets,
each of them consisting of separate read and a write registers.
The same registers are also used by the em2874/174/84.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

907d109b

[media] mxl111sf: don't redefine pr_err/info/debug · c778edb5

Hans Verkuil authored Jun 17, 2013

Remove the silly redefines of pr_err/info/debug.
This improves readability and it also gets rid of a bunch of warnings when
compiling this driver for older kernels using the compatibility media_build
system.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

c778edb5

[media] r820t: fix imr calibration · bbf94616

Gianluca Gennari authored Jun 17, 2013

The r820t_imr() calibration function of the Rafael Micro R820T tuner
generates this error at every tune attempt:
r820t 0-001a: No valid PLL values for 2252021 kHz!
The function was inspired by the original Realtek driver for rtl2832 devices
with the r820t tuner; anyway, in the original code the XTAL frequency of
the tuner was expressed in KHz, while in the kernel driver it is expressed
in Hz; so the calibration failed because of an out-of-range initial value.
The final result of the computation is then passed to the r820t_set_mux()
and r820t_set_pll() functions, but the conversion from KHz to Hz is already
correctly implemented.
Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

bbf94616

[media] r820t: avoid potential memcpy buffer overflow in shadow_store() · 757d7ace

Gianluca Gennari authored Jun 02, 2013

The memcpy in shadow_store() could exceed buffer limits when r > 0.
Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

757d7ace

[media] r820t: remove redundant initializations in r820t_attach() · e2e324d7

Gianluca Gennari authored Jun 02, 2013

fe->tuner_priv and fe->ops.tuner_ops are initialized twice in r820t_attach().
Remove the redundant initializations and also move fe->ops.tuner_ops
initialization outside of the mutex lock (as in the xc4000 tuner code for example).
Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

e2e324d7

[media] V4L: Remove all links of the media entity when unregistering subdev · c2efd3e6

Sylwester Nawrocki authored May 09, 2013

Remove all links of the subdev's media entity after internal_ops
'unregistered' call and right before unregistering the entity from
a media device.
It is assumed here that an unregistered (orphan) media entity cannot
have links to other entities registered to a media device.
It is also assumed the media links should be created/removed with
the media graph's mutex held.
The above implies that the caller of v4l2_device_unregister_subdev()
must not hold the graph's mutex.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

c2efd3e6

[media] media: Add a function removing all links of a media entity · 7349cec1

Sylwester Nawrocki authored May 09, 2013

This function allows to remove all media entity's links to other
entities, leaving no references to a media entity's links array
at its remote entities.
Currently, when a driver of some entity is removed it will free its
media entities links[] array, leaving dangling pointers at other
entities that are part of same media graph. This is troublesome when
drivers of a media device entities are in separate kernel modules,
removing only some modules will leave others in an incorrect state.
This function is intended to be used when an entity is being
unregistered from a media device.
With an assumption that normally the media links should be created
between media entities registered to a media device, with the graph
mutex held.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7349cec1

[media] smiapp: Clean up media entity after unregistering subdev · 2a3e7256

Sakari Ailus authored Jun 11, 2013

media_entity_cleanup() frees the links array which will be accessed by
media_entity_remove_links() called by v4l2_device_unregister_subdev().
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

2a3e7256

[media] davinci_vpfe: Clean up media entity after unregistering subdev · 7bb151b2

Sakari Ailus authored Jun 11, 2013

media_entity_cleanup() frees the links array which will be accessed by
media_entity_remove_links() called by v4l2_device_unregister_subdev().
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7bb151b2

17 Jun, 2013 29 commits

[media] staging/media: lirc_imon: fix leaks in imon_probe() · e049ca5e

Alexey Khoroshilov authored Jun 02, 2013

Error handling of usb_submit_urb() is not as all others in imon_probe().
It just unlocks mutexes and returns nonzero leaving all already
allocated resources unfreed.
The patch makes sure all the resources are deallocated.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

e049ca5e

[media] pvrusb2: Cocci spatch "memdup.spatch" · 07342664

Thomas Meyer authored Jun 01, 2013

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>