- 14 Jul, 2019 40 commits
-
-
Yoshihiro Shimoda authored
commit b2357839 upstream. The old commit 6e4b74e4 ("usb: renesas: fix scheduling in atomic context bug") fixed an atomic issue by using workqueue for the shdmac dmaengine driver. However, this has a potential race condition issue between the work pending and usbhsg_ep_free_request() in gadget mode. When usbhsg_ep_free_request() is called while pending the queue, since the work_struct will be freed and then the work handler is called, kernel panic happens on process_one_work(). To fix the issue, if we could call cancel_work_sync() at somewhere before the free request, it could be easy. However, the usbhsg_ep_free_request() is called on atomic (e.g. f_ncm driver calls free request via gether_disconnect()). For now, almost all users are having "USB-DMAC" and the DMAengine driver can be used on atomic. So, this patch adds a workaround for a race condition to call the DMAengine APIs without the workqueue. This means we still have TODO on shdmac environment (SH7724), but since it doesn't have SMP, the race condition might not happen. Fixes: ab330cf3 ("usb: renesas_usbhs: add support for USB-DMAC") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Blumenstingl authored
commit dfc4fdeb upstream. Use a 10000us AHB idle timeout in dwc2_core_reset() and make it consistent with the other "wait for AHB master IDLE state" ocurrences. This fixes a problem for me where dwc2 would not want to initialize when updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with 4.14. Testing on my board shows that it takes 180us until AHB master IDLE state is signalled. The very old vendor driver for this SoC (ifxhcd) used a 1 second timeout. Use the same timeout that is used everywhere when polling for GRSTCTL_AHBIDLE instead of using a timeout that "works for one board" (180us in my case) to have consistent behavior across the dwc2 driver. Cc: linux-stable <stable@vger.kernel.org> # 4.19+ Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Kiruthika Varadarajan authored
commit d29fcf70 upstream. On spin lock release in rx_submit, gether_disconnect get a chance to run, it makes port_usb NULL, rx_submit access NULL port USB, hence null pointer crash. Fixed by releasing the lock in rx_submit after port_usb is used. Fixes: 2b3d942c ("usb ethernet gadget: split out network core") Cc: <stable@vger.kernel.org> Signed-off-by:
Kiruthika Varadarajan <Kiruthika.Varadarajan@harman.com> Signed-off-by:
-
Fei Yang authored
commit 4833a94e upstream. The following line of code in function ffs_epfile_io is trying to set flag io_data->use_sg in case buffer required is larger than one page. io_data->use_sg = gadget->sg_supported && data_len > PAGE_SIZE; However at this point of time the variable data_len has not been set to the proper buffer size yet. The consequence is that io_data->use_sg is always set regardless what buffer size really is, because the condition (data_len > PAGE_SIZE) is effectively an unsigned comparison between -EINVAL and PAGE_SIZE which would always result in TRUE. Fixes: 772a7a72 ("usb: gadget: f_fs: Allow scatter-gather buffers") Signed-off-by:
Fei Yang <fei.yang@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Alan Stern authored
commit 6e41e225 upstream. The syzbot fuzzer found a bug in the p54 USB wireless driver. The issue involves a race between disconnect and the firmware-loader callback routine, and it has several aspects. One big problem is that when the firmware can't be loaded, the callback routine tries to unbind the driver from the USB _device_ (by calling device_release_driver) instead of from the USB _interface_ to which it is actually bound (by calling usb_driver_release_interface). The race involves access to the private data structure. The driver's disconnect handler waits for a completion that is signalled by the firmware-loader callback routine. As soon as the completion is signalled, you have to assume that the private data structure may have been deallocated by the disconnect handler -- even if the firmware was loaded without errors. However, the callback routine does access the private data several times after that point. Another problem is that, in order to ensure that the USB device structure hasn't been freed when the callback routine runs, the driver takes a reference to it. This isn't good enough any more, because now that the callback routine calls usb_driver_release_interface, it has to ensure that the interface structure hasn't been freed. Finally, the driver takes an unnecessary reference to the USB device structure in the probe function and drops the reference in the disconnect handler. This extra reference doesn't accomplish anything, because the USB core already guarantees that a device structure won't be deallocated while a driver is still bound to any of its interfaces. To fix these problems, this patch makes the following changes: Call usb_driver_release_interface() rather than device_release_driver(). Don't signal the completion until after the important information has been copied out of the private data structure, and don't refer to the private data at all thereafter. Lock udev (the interface's parent) before unbinding the driver instead of locking udev->parent. During the firmware loading process, take a reference to the USB interface instead of the USB device. Don't take an unnecessary reference to the device during probe (and then don't drop it during disconnect). Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: syzbot+200d4bb11b23d929335f@syzkaller.appspotmail.com CC: <stable@vger.kernel.org> Acked-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Oliver Barta authored
commit 3f2640ed upstream. This reverts commit 2e9fe539. Reading LSR unconditionally but processing the error flags only if UART_IIR_RDI bit was set before in IIR may lead to a loss of transmission error information on UARTs where the transmission error flags are cleared by a read of LSR. Information are lost in case an error is detected right before the read of LSR while processing e.g. an UART_IIR_THRI interrupt. Signed-off-by:
Oliver Barta <o.barta89@gmail.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 2e9fe539 ("serial: 8250: Don't service RX FIFO if interrupts are disabled") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Jörgen Storvist authored
commit aed2a262 upstream. Added USB IDs for GosunCn ME3630 cellular module in RNDIS mode. T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=03 Dev#= 18 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0601 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber=b950269c C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option Signed-off-by:
Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Andreas Fritiofson authored
commit f8377eff upstream. This adds the vid:pid of the isodebug v1 isolated JTAG/SWD+UART. Only the second channel is available for use as a serial port. Signed-off-by:
Andreas Fritiofson <andreas.fritiofson@unjo.com> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Brian Norris authored
commit 63d7ef36 upstream. Per the 802.11 specification, vendor IEs are (at minimum) only required to contain an OUI. A type field is also included in ieee80211.h (struct ieee80211_vendor_ie) but doesn't appear in the specification. The remaining fields (subtype, version) are a convention used in WMM headers. Thus, we should not reject vendor-specific IEs that have only the minimum length (3 bytes) -- we should skip over them (since we only want to match longer IEs, that match either WMM or WPA formats). We can reject elements that don't have the minimum-required 3 byte OUI. While we're at it, move the non-standard subtype and version fields into the WMM structs, to avoid this confusion in the future about generic "vendor header" attributes. Fixes: 685c9b77 ("mwifiex: Abort at too short BSS descriptor element") Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 685c9b77 upstream. Currently mwifiex_update_bss_desc_with_ie() implicitly assumes that the source descriptor entries contain the enough size for each type and performs copying without checking the source size. This may lead to read over boundary. Fix this by putting the source size check in appropriate places. Signed-off-by:
-
Andy Lutomirski authored
commit d974ffcf upstream. The vsyscall=native feature is gone -- remove the docs. Fixes: 076ca272 ("x86/vsyscall/64: Drop "native" vsyscalls") Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Florian Weimer <fweimer@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: stable@vger.kernel.org Cc: Borislav Petkov <bp@alien8.de> Cc: Kernel Hardening <kernel-hardening@lists.openwall.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lkml.kernel.org/r/d77c7105eb4c57c1a95a95b6a5b8ba194a18e764.1561610354.git.luto@kernel.orgSigned-off-by:
-
Tim Chen authored
commit 6e885594 upstream. Add documentation for Spectre vulnerability and the mitigation mechanisms: - Explain the problem and risks - Document the mitigation mechanisms - Document the command line controls - Document the sysfs files Co-developed-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Dianzhang Chen authored
commit 993773d1 upstream. The index to access the threads tls array is controlled by userspace via syscall: sys_ptrace(), hence leading to a potential exploitation of the Spectre variant 1 vulnerability. The index can be controlled from: ptrace -> arch_ptrace -> do_get_thread_area. Fix this by sanitizing the user supplied index before using it to access the p->thread.tls_array. Signed-off-by:
Dianzhang Chen <dianzhangchen0@gmail.com> Signed-off-by:
-
Dianzhang Chen authored
commit 31a2fbb3 upstream. The index to access the threads ptrace_bps is controlled by userspace via syscall: sys_ptrace(), hence leading to a potential exploitation of the Spectre variant 1 vulnerability. The index can be controlled from: ptrace -> arch_ptrace -> ptrace_get_debugreg. Fix this by sanitizing the user supplied index before using it access thread->ptrace_bps. Signed-off-by:
-
Song Liu authored
commit c952b35f upstream. bpf/btf write_* functions need ff->ph->env. With this missing, pipe-mode (perf record -o -) would crash like: Program terminated with signal SIGSEGV, Segmentation fault. This patch assign proper ph value to ff. Committer testing: (gdb) run record -o - Starting program: /root/bin/perf record -o - PERFILE2 <SNIP start of perf.data headers> Thread 1 "perf" received signal SIGSEGV, Segmentation fault. __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126 126 memcpy(ff->buf + ff->offset, buf, size); (gdb) bt #0 __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126 #1 do_write (ff=ff@entry=0x7fffffff8f80, buf=buf@entry=0x160, size=4) at util/header.c:137 #2 0x00000000004eddba in write_bpf_prog_info (ff=0x7fffffff8f80, evlist=<optimized out>) at util/header.c:912 #3 0x00000000004f69d7 in perf_event__synthesize_features (tool=tool@entry=0x97cc00 <record>, session=session@entry=0x7fffe9c6d010, evlist=0x7fffe9cae010, process=process@entry=0x4435d0 <process_synthesized_event>) at util/header.c:3695 #4 0x0000000000443c79 in record__synthesize (tail=tail@entry=false, rec=0x97cc00 <record>) at builtin-record.c:1214 #5 0x0000000000444ec9 in __cmd_record (rec=0x97cc00 <record>, argv=<optimized out>, argc=0) at builtin-record.c:1435 #6 cmd_record (argc=0, argv=<optimized out>) at builtin-record.c:2450 #7 0x00000000004ae3e9 in run_builtin (p=p@entry=0x98e058 <commands+216>, argc=argc@entry=3, argv=0x7fffffffd670) at perf.c:304 #8 0x000000000042eded in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:356 #9 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:400 #10 main (argc=3, argv=<optimized out>) at perf.c:522 (gdb) After the patch the SEGSEGV is gone. Reported-by:
David Carrillo Cisneros <davidca@fb.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kernel-team@fb.com Cc: stable@vger.kernel.org # v5.1+ Fixes: 606f972b ("perf bpf: Save bpf_prog_info information as headers to perf.data") Link: http://lkml.kernel.org/r/20190620010453.4118689-1-songliubraving@fb.comSigned-off-by:
-
Adrian Hunter authored
commit 97860b48 upstream. Commit f08046cb ("perf thread-stack: Represent jmps to the start of a different symbol") had the side-effect of introducing more stack entries before return from kernel space. When user space is also traced, those entries are popped before entry to user space, but when user space is not traced, they get stuck at the bottom of the stack, making the stack grow progressively larger. Fix by detecting a return-from-kernel branch type, and popping kernel addresses from the stack then. Note, the problem and fix affect the exported Call Graph / Tree but not the callindent option used by "perf script --call-trace". Example: perf-with-kcore record example -e intel_pt//k -- ls perf-with-kcore script example --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py example.db branches calls ~/libexec/perf-core/scripts/python/exported-sql-viewer.py example.db Menu option: Reports -> Context-Sensitive Call Graph Before: (showing Call Path column only) Call Path
▶ perf ▼ ls ▼ 12111:12111▶ setup_new_exec▶ __task_pid_nr_ns▶ perf_event_pid_type▶ perf_event_comm_output▶ perf_iterate_ctx▶ perf_iterate_sb▶ perf_event_comm▶ __set_task_comm▶ load_elf_binary▶ search_binary_handler▶ __do_execve_file.isra.41▶ __x64_sys_execve▶ do_syscall_64 ▼ entry_SYSCALL_64_after_hwframe ▼ swapgs_restore_regs_and_return_to_usermode ▼ native_iret▶ error_entry▶ do_page_fault ▼ error_exit ▼ retint_user▶ prepare_exit_to_usermode ▼ native_iret▶ error_entry▶ do_page_fault ▼ error_exit ▼ retint_user▶ prepare_exit_to_usermode ▼ native_iret▶ error_entry▶ do_page_fault ▼ error_exit ▼ retint_user▶ prepare_exit_to_usermode▶ native_iret After: (showing Call Path column only) Call Path▶ perf ▼ ls ▼ 12111:12111▶ setup_new_exec▶ __task_pid_nr_ns▶ perf_event_pid_type▶ perf_event_comm_output▶ perf_iterate_ctx▶ perf_iterate_sb▶ perf_event_comm▶ __set_task_comm▶ load_elf_binary▶ search_binary_handler▶ __do_execve_file.isra.41▶ __x64_sys_execve▶ do_syscall_64▶ entry_SYSCALL_64_after_hwframe▶ page_fault ▼ entry_SYSCALL_64 ▼ do_syscall_64▶ __x64_sys_brk▶ __x64_sys_access▶ __x64_sys_openat▶ __x64_sys_newfstat▶ __x64_sys_mmap▶ __x64_sys_close▶ __x64_sys_read▶ __x64_sys_mprotect▶ __x64_sys_arch_prctl▶ __x64_sys_munmap▶ exit_to_usermode_loop▶ __x64_sys_set_tid_address▶ __x64_sys_set_robust_list▶ __x64_sys_rt_sigaction▶ __x64_sys_rt_sigprocmask▶ __x64_sys_prlimit64▶ __x64_sys_statfs▶ __x64_sys_ioctl▶ __x64_sys_getdents64▶ __x64_sys_write▶ __x64_sys_exit_group Committer notes: The first arg to the perf-with-kcore needs to be the same for the 'record' and 'script' lines, otherwise we'll record the perf.data file and kcore_dir/ files in one directory ('example') to then try to use it from the 'bep' directory, fix the instructions above it so that both use 'example'. Signed-off-by:Adrian Hunter <adrian.hunter@intel.com> Tested-by:
-
John Garry authored
commit 599ee18f upstream. In commit 292c34c1 ("perf pmu: Fix core PMU alias list for X86 platform"), we fixed the issue of CPU events being aliased to uncore events. Fix this same issue for ARM64, since the said commit left the (broken) behaviour untouched for ARM64. Signed-off-by:
John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Cc: stable@vger.kernel.org Fixes: 292c34c1 ("perf pmu: Fix core PMU alias list for X86 platform") Link: http://lkml.kernel.org/r/1560521283-73314-2-git-send-email-john.garry@huawei.comSigned-off-by:
-
Adrian Hunter authored
commit a2d8a158 upstream. Fix intel-pt documentation to reflect the change of itrace defaults for perf script. Signed-off-by:
-
Adrian Hunter authored
commit 355200e0 upstream. Commit 4eb06815 ("perf script: Make itrace script default to all calls") does not work for the case when '--itrace' only is used, because default_no_sample is not being passed. Example: Before: $ perf record -e intel_pt/cyc/u ls $ perf script --itrace > cmp1.txt $ perf script --itrace=cepwx > cmp2.txt $ diff -sq cmp1.txt cmp2.txt Files cmp1.txt and cmp2.txt differ After: $ perf script --itrace > cmp1.txt $ perf script --itrace=cepwx > cmp2.txt $ diff -sq cmp1.txt cmp2.txt Files cmp1.txt and cmp2.txt are identical Signed-off-by:
-
Adrian Hunter authored
commit 26f19c2e upstream. Commit 4eb06815 ("perf script: Make itrace script default to all calls") does not work because 'use_browser' is being used to determine whether to default to periodic sampling (i.e. better for perf report). The result is that nothing but CBR events display for perf script when no --itrace option is specified. Fix by using 'default_no_sample' and 'inject' instead. Example: Before: $ perf record -e intel_pt/cyc/u ls $ perf script > cmp1.txt $ perf script --itrace=cepwx > cmp2.txt $ diff -sq cmp1.txt cmp2.txt Files cmp1.txt and cmp2.txt differ After: $ perf script > cmp1.txt $ perf script --itrace=cepwx > cmp2.txt $ diff -sq cmp1.txt cmp2.txt Files cmp1.txt and cmp2.txt are identical Signed-off-by:
-
Douglas Anderson authored
commit dbc3117d upstream. In reboot tests on several devices we were seeing a "use after free" when slub_debug or KASAN was enabled. The kernel complained about: Unable to handle kernel paging request at virtual address 6b6b6c2b ...which is a classic sign of use after free under slub_debug. The stack crawl in kgdb looked like: 0 test_bit (addr=<optimized out>, nr=<optimized out>) 1 bfq_bfqq_busy (bfqq=<optimized out>) 2 bfq_select_queue (bfqd=<optimized out>) 3 __bfq_dispatch_request (hctx=<optimized out>) 4 bfq_dispatch_request (hctx=<optimized out>) 5 0xc056ef00 in blk_mq_do_dispatch_sched (hctx=0xed249440) 6 0xc056f728 in blk_mq_sched_dispatch_requests (hctx=0xed249440) 7 0xc0568d24 in __blk_mq_run_hw_queue (hctx=0xed249440) 8 0xc0568d94 in blk_mq_run_work_fn (work=<optimized out>) 9 0xc024c5c4 in process_one_work (worker=0xec6d4640, work=0xed249480) 10 0xc024cff4 in worker_thread (__worker=0xec6d4640) Digging in kgdb, it could be found that, though bfqq looked fine, bfqq->bic had been freed. Through further digging, I postulated that perhaps it is illegal to access a "bic" (AKA an "icq") after bfq_exit_icq() had been called because the "bic" can be freed at some point in time after this call is made. I confirmed that there certainly were cases where the exact crashing code path would access the "bic" after bfq_exit_icq() had been called. Sspecifically I set the "bfqq->bic" to (void *)0x7 and saw that the bic was 0x7 at the time of the crash. To understand a bit more about why this crash was fairly uncommon (I saw it only once in a few hundred reboots), you can see that much of the time bfq_exit_icq_fbqq() fully frees the bfqq and thus it can't access the ->bic anymore. The only case it doesn't is if bfq_put_queue() sees a reference still held. However, even in the case when bfqq isn't freed, the crash is still rare. Why? I tracked what happened to the "bic" after the exit routine. It doesn't get freed right away. Rather, put_io_context_active() eventually called put_io_context() which queued up freeing on a workqueue. The freeing then actually happened later than that through call_rcu(). Despite all these delays, some extra debugging showed that all the hoops could be jumped through in time and the memory could be freed causing the original crash. Phew! To make a long story short, assuming it truly is illegal to access an icq after the "exit_icq" callback is finished, this patch is needed. Cc: stable@vger.kernel.org Reviewed-by:
Paolo Valente <paolo.valente@unimore.it> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Vadim Sukhomlinov authored
commit db4d8cb9 upstream. TPM 2.0 Shutdown involve sending TPM2_Shutdown to TPM chip and disabling future TPM operations. TPM 1.2 behavior was different, future TPM operations weren't disabled, causing rare issues. This patch ensures that future TPM operations are disabled. Fixes: d1bd4a79 ("tpm: Issue a TPM2_Shutdown for TPM2 devices.") Cc: stable@vger.kernel.org Signed-off-by:
Vadim Sukhomlinov <sukhomlinov@google.com> [dianders: resolved merge conflicts with mainline] Signed-off-by:
Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by:
-
Kees Cook authored
commit 782779b6 upstream. A "get random" may fail with a TPM error, but those codes were returned as-is to the caller, which assumed the result was the number of bytes that had been written to the target buffer, which could lead to a kernel heap memory exposure and over-read. This fixes tpm1_get_random() to mask positive TPM errors into -EIO, as before. [ 18.092103] tpm tpm0: A TPM error (379) occurred attempting get random [ 18.092106] usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-64' (offset 0, size 379)! Link: https://bugzilla.redhat.com/show_bug.cgi?id=1650989Reported-by:
Phil Baker <baker1tex@gmail.com> Reported-by:
Craig Robson <craig@zhatt.com> Fixes: 7aee9c52 ("tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure") Cc: Laura Abbott <labbott@redhat.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Tested-by:
Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by:
-
Kailang Yang authored
commit d07a9a4f upstream. Dell headset mode platform with ALC236. It doesn't recording after system resume from S3. S3 mode was deep. s2idle was not has this issue. S3 deep will cut of codec power. So, the register will back to default after resume back. This patch will solve this issue. Signed-off-by:
Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Takashi Iwai authored
commit ca95c7bf upstream. Extension Unit (XU) is used to have a compatible layout with Processing Unit (PU) on UAC1, and the usb-audio driver code assumed it for parsing the descriptors. Meanwhile, on UAC2, XU became slightly incompatible with PU; namely, XU has a one-byte bmControls bitmap while PU has two bytes bmControls bitmap. This incompatibility results in the read of a wrong address for the last iExtension field, which ended up with an incorrect string for the mixer element name, as recently reported for Focusrite Scarlett 18i20 device. This patch corrects this misalignment by introducing a couple of new macros and calling them depending on the descriptor type. Fixes: 23caaf19 ("ALSA: usb-mixer: Add support for Audio Class v2.0") Reported-by:
Stefan Sauer <ensonic@hora-obscura.de> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit b09a2ab2 upstream. There was a typo at the lower frequency limit for a DVB-C card, causing the driver to fail while tuning channels at the VHF range. https://bugzilla.kernel.org/show_bug.cgi?id=202083 Fixes: f1b1eabf ("media: dvb: represent min/max/step/tolerance freqs in Hz") Reported-by:
Ari Kohtamäki <ari.kohtamaki@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Steven J. Magnani authored
commit fa33cdbf upstream. In some cases, using the 'truncate' command to extend a UDF file results in a mismatch between the length of the file's extents (specifically, due to incorrect length of the final NOT_ALLOCATED extent) and the information (file) length. The discrepancy can prevent other operating systems (i.e., Windows 10) from opening the file. Two particular errors have been observed when extending a file: 1. The final extent is larger than it should be, having been rounded up to a multiple of the block size. B. The final extent is not shorter than it should be, due to not having been updated when the file's information length was increased. [JK: simplified udf_do_extend_final_block(), fixed up some types] Fixes: 2c948b3f ("udf: Avoid IO in udf_clear_inode") CC: stable@vger.kernel.org Signed-off-by:
Steven J. Magnani <steve@digidescorp.com> Link: https://lore.kernel.org/r/1561948775-5878-1-git-send-email-steve@digidescorp.comSigned-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Hongjie Fang authored
commit 5858bdad upstream. The directory may have been removed when entering fscrypt_ioctl_set_policy(). If so, the empty_dir() check will return error for ext4 file system. ext4_rmdir() sets i_size = 0, then ext4_empty_dir() reports an error because 'inode->i_size < EXT4_DIR_REC_LEN(1) + EXT4_DIR_REC_LEN(2)'. If the fs is mounted with errors=panic, it will trigger a panic issue. Add the check IS_DEADDIR() to fix this problem. Fixes: 9bd8212f ("ext4 crypto: add encryption policy and password salt support") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by:
Hongjie Fang <hongjiefang@asrmicro.com> Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Benjamin Coddington authored
[ Upstream commit 90910519 ] We can end up in nfs4_opendata_alloc during task exit, in which case current->fs has already been cleaned up. This leads to a crash in current_umask(). Fix this by only setting creation opendata if we are actually doing an open with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since O_CREAT will never be set for the recovery path. Suggested-by:
Trond Myklebust <trondmy@hammerspace.com> Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andrew Jones authored
[ Upstream commit e4e5a865 ] The emulated ptimer needs to track the level changes, otherwise the the interrupt will never get deasserted, resulting in the guest getting stuck in an interrupt storm if it enables ptimer interrupts. This was found with kvm-unit-tests; the ptimer tests hung as soon as interrupts were enabled. Typical Linux guests don't have a problem as they prefer using the virtual timer. Fixes: bee038a6 ("KVM: arm/arm64: Rework the timer code to use a timer_map") Signed-off-by:
Andrew Jones <drjones@redhat.com> [Simplified the patch to res we only care about emulated timers here] Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Rasmus Villemoes authored
[ Upstream commit 48620e34 ] The comment is correct, but the code ends up moving the bits four places too far, into the VTUOp field. Fixes: 11ea809f (net: dsa: mv88e6xxx: support 256 databases) Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
yangerkun authored
[ Upstream commit c6d9c35d ] Run below script as root, dquot_add_space will return -EDQUOT since __dquot_transfer call dquot_add_space with flags=0, and dquot_add_space think it's a preallocation. Fix it by set flags as DQUOT_SPACE_WARN. mkfs.ext4 -O quota,project /dev/vdb mount -o prjquota /dev/vdb /mnt setquota -P 23 1 1 0 0 /dev/vdb dd if=/dev/zero of=/mnt/test-file bs=4K count=1 chattr -p 23 test-file Fixes: 7b9ca4c6 ("quota: Reduce contention on dq_data_lock") Signed-off-by:
yangerkun <yangerkun@huawei.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 9739ab7e ] With the strict dma mask checking introduced with the switch to the generic DMA direct code common wifi chips on 32-bit powerbooks stopped working. Add a 30-bit ZONE_DMA to the 32-bit pmac builds to allow them to reliably allocate dma coherent memory. Fixes: 65a21b71 ("powerpc/dma: remove dma_nommu_dma_supported") Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Acked-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Nilesh Javali authored
[ Upstream commit 1ac3549e ] The kernel panic was observed during iSCSI discovery via offload with below call trace, [ 2115.646901] BUG: unable to handle kernel NULL pointer dereference at (null) [ 2115.646909] IP: [<ffffffffacf7f0cc>] strncmp+0xc/0x60 [ 2115.646927] PGD 0 [ 2115.646932] Oops: 0000 [#1] SMP [ 2115.647107] CPU: 24 PID: 264 Comm: kworker/24:1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1 [ 2115.647133] Workqueue: slowpath-13:00. qed_slowpath_task [qed] [ 2115.647135] task: ffff8d66af80b0c0 ti: ffff8d66afb80000 task.ti: ffff8d66afb80000 [ 2115.647136] RIP: 0010:[<ffffffffacf7f0cc>] [<ffffffffacf7f0cc>] strncmp+0xc/0x60 [ 2115.647141] RSP: 0018:ffff8d66afb83c68 EFLAGS: 00010206 [ 2115.647143] RAX: 0000000000000001 RBX: 0000000000000007 RCX: 000000000000000a [ 2115.647144] RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffff8d632b3ba040 [ 2115.647145] RBP: ffff8d66afb83c68 R08: 0000000000000000 R09: 000000000000ffff [ 2115.647147] R10: 0000000000000007 R11: 0000000000000800 R12: ffff8d66a30007a0 [ 2115.647148] R13: ffff8d66747a3c10 R14: ffff8d632b3ba000 R15: ffff8d66747a32f8 [ 2115.647149] FS: 0000000000000000(0000) GS:ffff8d66aff00000(0000) knlGS:0000000000000000 [ 2115.647151] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2115.647152] CR2: 0000000000000000 CR3: 0000000509610000 CR4: 00000000007607e0 [ 2115.647153] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2115.647154] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2115.647155] PKRU: 00000000 [ 2115.647157] Call Trace: [ 2115.647165] [<ffffffffc0634cc5>] qedi_get_protocol_tlv_data+0x2c5/0x510 [qedi] [ 2115.647184] [<ffffffffc05968f5>] ? qed_mfw_process_tlv_req+0x245/0xbe0 [qed] [ 2115.647195] [<ffffffffc05496cb>] qed_mfw_fill_tlv_data+0x4b/0xb0 [qed] [ 2115.647206] [<ffffffffc0596911>] qed_mfw_process_tlv_req+0x261/0xbe0 [qed] [ 2115.647215] [<ffffffffacce0e8e>] ? dequeue_task_fair+0x41e/0x660 [ 2115.647221] [<ffffffffacc2a59e>] ? __switch_to+0xce/0x580 [ 2115.647230] [<ffffffffc0546013>] qed_slowpath_task+0xa3/0x160 [qed] [ 2115.647278] RIP [<ffffffffacf7f0cc>] strncmp+0xc/0x60 Fix kernel panic by validating the session targetname before providing TLV data and confirming the presence of boot targets. Signed-off-by:
Nilesh Javali <njavali@marvell.com> Reviewed-by:
Lee Duncan <lduncan@suse.com> Reviewed-by:
Chris Leech <cleech@redhat.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 94762740 ] Left shifting the signed int value 1 by 31 bits has undefined behaviour and the shift amount oq_no can be as much as 63. Fix this by using BIT_ULL(oq_no) instead. Addresses-Coverity: ("Bad shift operation") Fixes: f21fb3ed ("Add support of Cavium Liquidio ethernet adapters") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 6f6a8622 ] A similar fix to Patch "ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL" is also needed by ip6_tunnel. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 74b67efa ] The copy_from_user() function returns the number of bytes remaining to be copied but we want to return a negative error code. Otherwise the callers treat it as a successful copy. Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190618131843.GA29463@mwandaSigned-off-by:
-
Mauro S. M. Rodrigues authored
[ Upstream commit cf18cecc ] Some transceivers may comply with SFF-8472 even though they do not implement the Digital Diagnostic Monitoring (DDM) interface described in the spec. The existence of such area is specified by the 6th bit of byte 92, set to 1 if implemented. Currently, without checking this bit, bnx2x fails trying to read sfp module's EEPROM with the follow message: ethtool -m enP5p1s0f1 Cannot get Module EEPROM data: Input/output error Because it fails to read the additional 256 bytes in which it is assumed to exist the DDM data. This issue was noticed using a Mellanox Passive DAC PN 01FT738. The EEPROM data was confirmed by Mellanox as correct and similar to other Passive DACs from other manufacturers. Signed-off-by:
Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Acked-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by:
-
Mariusz Tkaczyk authored
[ Upstream commit 9642fa73 ] Stopping external metadata arrays during resync/recovery causes retries, loop of interrupting and starting reconstruction, until it hit at good moment to stop completely. While these retries curr_mark_cnt can be small- especially on HDD drives, so subtraction result can be smaller than 0. However it is casted to uint without checking. As a result of it the status bar in /proc/mdstat while stopping is strange (it jumps between 0% and 99%). The real problem occurs here after commit 72deb455 ("block: remove CONFIG_LBDAF"). Sector_div() macro has been changed, now the divisor is casted to uint32. For db = -8 the divisior(db/32-1) becomes 0. Check if db value can be really counted and replace these macro by div64_u64() inline. Signed-off-by:
Mariusz Tkaczyk <mariusz.tkaczyk@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
[ Upstream commit 942a8993 ] The call to sc_buffer_alloc currently returns NULL (no buffer) or a buffer descriptor. There is a third case when the port is down. Currently that returns NULL and this prevents the caller from properly handling the sc_buffer_alloc() failure. A verbs code link test after the call is racy so the indication needs to come from the state check inside the allocation routine to be valid. Fix by encoding the ECOMM failure like SDMA. IS_ERR_OR_NULL() tests are added at all call sites. For verbs send, this needs to treat any error by returning a completion without any MMIO copy. Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
