- 13 Jun, 2013 16 commits
-
-
Sylwester Nawrocki authored
This patch introduces common structure for the video entities to handle all video nodes and media pipelines associated with them in more generic way. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Create a common module (exynos4-is-common.ko) for common functions used across the exynos4-is video device and subdev drivers. Signed-off-by:
-
Sylwester Nawrocki authored
This fixes following compilation warning: drivers/media/i2c/s5c73m3/s5c73m3-core.c: In function ‘__s5c73m3_power_off’: drivers/media/i2c/s5c73m3/s5c73m3-core.c:1389:19: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result Signed-off-by:
-
Sachin Kamat authored
These symbols are used only in their respective files and hence should be made static. [s.nawrocki@samsung.com: dropped the __fimc_is_hw_update_param() function change] Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
-
Sachin Kamat authored
'exynos_mfc_match' is always compiled in. Hence of_match_ptr is unnecessary. Signed-off-by:
-
Sachin Kamat authored
This is a DT only driver and exynos_gsc_match is always compiled in. Hence of_match_ptr is unnecessary. Signed-off-by:
-
Sachin Kamat authored
NULL check on clocks obtained using common clock APIs should not be done. Use IS_ERR only. [s.nawrocki: removed unrelated whitespace change] Signed-off-by:
-
Sachin Kamat authored
NULL check on clocks obtained using common clock APIs should not be done. Use IS_ERR only. Signed-off-by:
-
Sylwester Nawrocki authored
Fill in properly bus_info and card fields and set device_caps. The querycap ioctl handler is renamed for consistency with the other ioctls. Signed-off-by:
-
Sylwester Nawrocki authored
The driver id_table is unused since all SoCs containing the FIMC-LITE IP block have been dt-only. Just remove it. Signed-off-by:
-
Sylwester Nawrocki authored
The s5c73m3 sensor node should be off an I2C bus controller node. Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code in the vb2_dma_contig_init_ctx() error handling case instead of 0, as done elsewhere in this function. Also vb2_dma_contig_init_ctx() return ERR_PTR() in case of error and never return NULL, so use IS_ERR() replace IS_ERR_OR_NULL(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Sachin Kamat authored
clk_unprepare checks for NULL pointer. Hence convert IS_ERR_OR_NULL to IS_ERR only. [s.nawrocki: added initialisation of the clock array to ERR_PTR() value] Signed-off-by:
-
Sachin Kamat authored
clk_unprepare checks for NULL pointer. Hence convert IS_ERR_OR_NULL to IS_ERR only. [s.nawrocki: replaced initialisations to NULL with ERR_PTR() value] Signed-off-by:
-
Sachin Kamat authored
Silences the following type of warning: WARNING: space prohibited before semicolon Signed-off-by:
-
Sachin Kamat authored
dev_info is preferred to printk. Silences the related checkpatch warning. WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ... Signed-off-by:
-
- 12 Jun, 2013 6 commits
-
-
Sachin Kamat authored
These symbols are local to the file and should be static. Signed-off-by:
-
Dan Carpenter authored
These structs have holes and reserved struct members which aren't cleared. I've added a memset() so we don't leak stack information. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Check the return value and catch errors correctly. Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Laurent Pinchart authored
When the OMAP3 ISP driver is compiled in the kernel the device can be probed before the corresponding IOMMU is available. Defer the probe in that case, and fix a crash in the error path. Reported-by:
Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
-
Arnd Bergmann authored
The ispqueue.h file uses vm_flags_t, which is defined in linux/mm_types.h, so we must include that header in order to build in all configurations. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
- 09 Jun, 2013 18 commits
-
-
Mauro Carvalho Chehab authored
X-Patchwork-Delegate: mchehab@redhat.com There are a few cases where breaking the code into separate lines make it worse to read. However, on several places, breaking it to make checkpatch.pl happier is OK and improves code readability. So, break longer lines where that won't cause harm. Signed-off-by: -
Mauro Carvalho Chehab authored
X-Patchwork-Delegate: mchehab@redhat.com There are several places where: state->var = (some_var) The parenthesis there are doing nothing but making it harder to read and breaking the 80 columns soft limits. Just get rid of it. Signed-off-by: -
Mauro Carvalho Chehab authored
X-Patchwork-Delegate: mchehab@redhat.com Almost all 80-col warnings are related to comments. There's one, however, that it is due to a one-line enum declaration for enum agc_ctrl_mode. Break it into one line per enumered data. Signed-off-by: -
Mauro Carvalho Chehab authored
X-Patchwork-Delegate: mchehab@redhat.com The comments markup language used on Kernel is defined at: Documentation/kernel-doc-nano-HOWTO.txt Remove invalid markups from the header file. Signed-off-by: -
Mauro Carvalho Chehab authored
X-Patchwork-Delegate: mchehab@redhat.com Fixes the following checkpatch.pl warnings: WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(10); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt + msleep(1); Signed-off-by: -
Mauro Carvalho Chehab authored
X-Patchwork-Delegate: mchehab@redhat.com WARNING: quoted string split across lines #5416: FILE: media/dvb-frontends/drxk_hard.c:5416: + dprintk(1, "Could not set demodulator parameters. Make " + "sure qam_demod_parameter_count (%d) is correct for " WARNING: quoted string split across lines #5423: FILE: media/dvb-frontends/drxk_hard.c:5423: + dprintk(1, "Auto-probing the correct QAM demodulator command " + "parameters was successful - using %d parameters.\n", Signed-off-by: -
Mauro Carvalho Chehab authored
X-Patchwork-Delegate: mchehab@redhat.com replace all occurrences of printk(KERN_* by pr_info/pr_warn/pr_err/pr_debug/pr_cont macros. Signed-off-by: -
Mauro Carvalho Chehab authored
X-Patchwork-Delegate: mchehab@redhat.com Thare are lots of CamelCase warnings produced by checkpatch.pl. This weren't fixed at the time the driver got submitted due to the lack of manpower do to such cleanup. Now that I have one script that automates this task, cleans it. That makes the driver almost checkpatch-compliant, except for 80 column warnings. Signed-off-by: -
Mauro Carvalho Chehab authored
X-Patchwork-Delegate: mchehab@redhat.com Log10 routine is already defined at dvb_math.h and provides a good enough approximation for 100 x log10(). So, instead of reinventing the wheel, use the already existing function. While here, don't use CamelCase on the function name. Signed-off-by: -
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Alessandro Miceli authored
The device has been tested on a MIPSel box with kernel 3.1.1 and backported media_tree drivers The kernel detects the device with the following output: usbcore: registered new interface driver dvb_usb_rtl28xxu usb 1-2: dvb_usb_v2: found a 'Crypto Redi PC50A' in warm state usb 1-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer DVB: registering new adapter (Crypto Redi PC50A) usb 1-2: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))... i2c i2c-4: fc0012: Fitipower FC0012 successfully identified usb 1-2: dvb_usb_v2: 'Crypto Redi PC50A' successfully initialized and connected [crope@iki.fi: fix trivial merge conflict] Signed-off-by:
Alessandro Miceli <angelofsky1980@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Use masked register write inside rtl2832u_power_ctrl(). Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
... just because I want to be perfect ;) Signed-off-by:
-
Miroslav Šustek authored
USB ID 0413:6a03 is Leadtek WinFast DTV Dongle mini. Decoder Realtek RTL2832U and tuner Infineon TUA9001. Signed-off-by:
Miroslav Šustek <sustmidown@centrum.cz> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Thanks to Rodrigo for original implementation! Signed-off-by:
-
Rodrigo Tartajo authored
Hi, This patch uses the driver from openpli[1] as a template to restore the remote control support. I had to divert from the original to use the in kernel rc protocol decoder. The key repetition does, not seem to work but I cant find the problem in the driver. As a raw rc provider, no key table is hardcoded. Rodrigo. [1]: https://aur.archlinux.org/packages/dvb-usb-rtl2832u-openpli/?comments=allSigned-off-by:
Rodrigo Tartajo <rtarty@gmail.com> Signed-off-by:
-
