Skip to content

L
linux
Switch branch/tag
  1. 18 Nov, 2014 1 commit
    • Ian Munsie's avatar
      cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning · bc78b05b
      Ian Munsie authored 
      If an AFU has a hardware bug that causes it to acknowledge a context
terminate or remove while that context has outstanding transactions, it
is possible for the kernel to receive an interrupt for that context
after we have removed it from the context list.

The kernel will not be able to demultiplex the interrupt (or worse - if
we have already reallocated the process handle we could mis-attribute it
to the new context), and printed a big scary warning.

It did not acknowledge the interrupt, which would effectively halt
further translation fault processing on the PSL.

This patch makes the warning clearer about the likely cause of the issue
(i.e. hardware bug) to make it obvious to future AFU designers of what
needs to be fixed. It also prints out the process handle which can then
be matched up with hardware and software traces for debugging.

It also acknowledges the interrupt to the PSL with either an address
error or acknowledge, so that the PSL can continue with other
translations.
Signed-off-by: default avatarIan Munsie <imunsie@au1.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      bc78b05b
  3. 17 Nov, 2014 2 commits
    • Neelesh Gupta's avatar
      rtc/tpo: Driver to support rtc and wakeup on PowerNV platform · 16b1d26e
      Neelesh Gupta authored 
      The patch implements the OPAL rtc driver that binds with the rtc
driver subsystem. The driver uses the platform device infrastructure
to probe the rtc device and register it to rtc class framework. The
'wakeup' is supported depending upon the property 'has-tpo' present
in the OF node. It provides a way to load the generic rtc driver in
in the absence of an OPAL driver.

The patch also moves the existing OPAL rtc get/set time interfaces to the
new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL.

Test results:
-------------
Host:
[root@tul169p1 ~]# ls -l /sys/class/rtc/
total 0
lrwxrwxrwx 1 root root 0 Oct 14 03:07 rtc0 -> ../../devices/opal-rtc/rtc/rtc0
[root@tul169p1 ~]# cat /sys/devices/opal-rtc/rtc/rtc0/time
08:10:07
[root@tul169p1 ~]# echo `date '+%s' -d '+ 2 minutes'` > /sys/class/rtc/rtc0/wakealarm
[root@tul169p1 ~]# cat /sys/class/rtc/rtc0/wakealarm
1413274345
[root@tul169p1 ~]#

FSP:
$ smgr mfgState
standby
$ rtim timeofday

System time is valid: 2014/10/14 08:12:04.225115

$ smgr mfgState
ipling
$

CC: devicetree@vger.kernel.org
CC: tglx@linutronix.de
CC: rtc-linux@googlegroups.com
CC: a.zummo@towertech.it
Signed-off-by: default avatarNeelesh Gupta <neelegup@linux.vnet.ibm.com>
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      16b1d26e
    • Vineeth Vijayan's avatar
      powerpc: Use generic PIE randomization · 59994fb0
      Vineeth Vijayan authored 
      Back in 2009 we merged 501cb16d "Randomise PIEs", which added support for
randomizing PIE (Position Independent Executable) binaries.

That commit added randomize_et_dyn(), which correctly randomized the addresses,
but failed to honor PF_RANDOMIZE. That means it was not possible to disable PIE
randomization via the personality flag, or /proc/sys/kernel/randomize_va_space.

Since then there has been generic support for PIE randomization added to
binfmt_elf.c, selectable via ARCH_BINFMT_ELF_RANDOMIZE_PIE.

Enabling that allows us to drop randomize_et_dyn(), which means we start
honoring PF_RANDOMIZE correctly.

It also causes a fairly major change to how we layout PIE binaries.

Currently we will place the binary at 512MB-520MB for 32 bit binaries, or
512MB-1.5GB for 64 bit binaries, eg:

    $ cat /proc/$$/maps
    4e550000-4e580000 r-xp 00000000 08:02 129813       /bin/dash
    4e580000-4e590000 rw-p 00020000 08:02 129813       /bin/dash
    10014110000-10014140000 rw-p 00000000 00:00 0      [heap]
    3fffaa3f0000-3fffaa5a0000 r-xp 00000000 08:02 921  /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fffaa5a0000-3fffaa5b0000 rw-p 001a0000 08:02 921  /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fffaa5c0000-3fffaa5d0000 rw-p 00000000 00:00 0
    3fffaa5d0000-3fffaa5f0000 r-xp 00000000 00:00 0    [vdso]
    3fffaa5f0000-3fffaa620000 r-xp 00000000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so
    3fffaa620000-3fffaa630000 rw-p 00020000 08:02 1246 /lib/powerpc64le-linux-gnu/ld-2.19.so
    3ffffc340000-3ffffc370000 rw-p 00000000 00:00 0    [stack]

With this commit applied we don't do any special randomisation for the binary,
and instead rely on mmap randomisation. This means the binary ends up at high
addresses, eg:

    $ cat /proc/$$/maps
    3fff99820000-3fff999d0000 r-xp 00000000 08:02 921    /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fff999d0000-3fff999e0000 rw-p 001a0000 08:02 921    /lib/powerpc64le-linux-gnu/libc-2.19.so
    3fff999f0000-3fff99a00000 rw-p 00000000 00:00 0
    3fff99a00000-3fff99a20000 r-xp 00000000 00:00 0      [vdso]
    3fff99a20000-3fff99a50000 r-xp 00000000 08:02 1246   /lib/powerpc64le-linux-gnu/ld-2.19.so
    3fff99a50000-3fff99a60000 rw-p 00020000 08:02 1246   /lib/powerpc64le-linux-gnu/ld-2.19.so
    3fff99a60000-3fff99a90000 r-xp 00000000 08:02 129813 /bin/dash
    3fff99a90000-3fff99aa0000 rw-p 00020000 08:02 129813 /bin/dash
    3fffc3de0000-3fffc3e10000 rw-p 00000000 00:00 0      [stack]
    3fffc55e0000-3fffc5610000 rw-p 00000000 00:00 0      [heap]

Although this should be OK, it's possible it might break badly written
binaries that make assumptions about the address space layout.
Signed-off-by: default avatarVineeth Vijayan <vvijayan@mvista.com>
[mpe: Rewrite changelog]
Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      59994fb0
  5. 14 Nov, 2014 12 commits
  7. 12 Nov, 2014 8 commits
  9. 09 Nov, 2014 17 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7