- 30 Nov, 2022 40 commits
-
-
Stefan Roesch authored
This adds the max_ratio_fine knob. The knob specifies the values not based on 1 of 100, but instead 1 per million. Link: https://lkml.kernel.org/r/20221119005215.3052436-17-shr@devkernel.ioSigned-off-by:
Stefan Roesch <shr@devkernel.io> Cc: Chris Mason <clm@meta.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Stefan Roesch authored
This introduces bdi_set_max_ratio_no_scale(). It uses the max granularity for the ratio. This function by the new sysfs knob max_ratio_fine. Link: https://lkml.kernel.org/r/20221119005215.3052436-16-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
This documents the new /sys/class/bdi/<bdi>/min_bytes knob. [akpm@linux-foundation.org: fix htmldocs warnings] Link: https://lkml.kernel.org/r/20221119005215.3052436-15-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
bdi has two existing knobs to limit the amount of dirty memory: min_ratio and max_ratio. However the granularity of the knobs is limited and often it is more convenient to specify limits in terms of bytes. This change adds the min_bytes knob. It does not store the min_bytes value, instead it converts the max_bytes value to a ratio. The value is therefore more an approximation than an absolute value. It also maintains the sum over all the bdi min_ratio values stored in the variable bdi_min_ratio. Link: https://lkml.kernel.org/r/20221119005215.3052436-14-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
This introduces the bdi_set_min_bytes() function. The min_bytes function does not store the min_bytes value. Instead it converts the min_bytes value into the corresponding ratio value. Link: https://lkml.kernel.org/r/20221119005215.3052436-13-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
This splits off the __bdi_set_min_ratio() function from the bdi_set_min_ratio() function. The __bdi_set_min_ratio() function will also be called from the bdi_set_min_bytes() function, which will be introduced in the next patch. Link: https://lkml.kernel.org/r/20221119005215.3052436-12-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
This adds a function to return the specified value for min_bytes. It converts the stored min_ratio of the bdi to the corresponding bytes value. This is an approximation as it is based on the value that is returned by global_dirty_limits(), which can change. The returned value can be different than the value when the min_bytes value was set. Link: https://lkml.kernel.org/r/20221119005215.3052436-11-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
This documents the new /sys/class/bdi/<bdi>/max_bytes knob. Link: https://lkml.kernel.org/r/20221119005215.3052436-10-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
This adds the new knob max_bytes to specify a dirty memory limit for the corresponding bdi. The specified bytes value is converted to a ratio. Link: https://lkml.kernel.org/r/20221119005215.3052436-9-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
This introduces the bdi_set_max_bytes() function. The max_bytes function does not store the max_bytes value. Instead it converts the max_bytes value into the corresponding ratio value. Link: https://lkml.kernel.org/r/20221119005215.3052436-8-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
This splits off __bdi_set_max_ratio() from bdi_set_max_ratio(). __bdi_set_max_ratio() will also be called from bdi_set_max_bytes(), which will be introduced in the next patch. Link: https://lkml.kernel.org/r/20221119005215.3052436-7-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
This adds a function to return the specified value for max_bytes. It converts the stored max_ratio of the bdi to the corresponding bytes value. It introduces the bdi_get_bytes helper function to do the conversion. This is an approximation as it is based on the value that is returned by global_dirty_limits(), which can change. The helper function will also be used by the min_bytes bdi knob. Link: https://lkml.kernel.org/r/20221119005215.3052436-6-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
To get finer granularity for ratio calculations use part per million instead of percentiles. This is especially important if we want to automatically convert byte values to ratios. Otherwise the values that are actually used can be quite different. This is also important for machines with more main memory (1% of 256GB is already 2.5GB). Link: https://lkml.kernel.org/r/20221119005215.3052436-5-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
This documents the new /sys/class/bdi/<bdi>/strict_limit knob. Link: https://lkml.kernel.org/r/20221119005215.3052436-4-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
Add a new knob to /sys/class/bdi/<bdi>/strict_limit. This new knob allows to set/unset the flag BDI_CAP_STRICTLIMIT in the bdi capabilities. Link: https://lkml.kernel.org/r/20221119005215.3052436-3-shr@devkernel.ioSigned-off-by:
-
Stefan Roesch authored
Patch series "mm/block: add bdi sysfs knobs", v4. At meta network block devices (nbd) are used to implement remote block storage. In testing and during production it has been observed that these network block devices can consume a huge portion of the dirty writeback cache and writeback can take a considerable time. To be able to give stricter limits, I'm proposing the following changes: 1) introduce strictlimit knob Currently the max_ratio knob exists to limit the dirty_memory. However this knob only applies once (dirty_ratio + dirty_background_ratio) / 2 has been reached. With the BDI_CAP_STRICTLIMIT flag, the max_ratio can be applied without reaching that limit. This change exposes that knob. This knob can also be useful for NFS, fuse filesystems and USB devices. 2) Use part of 1000000 internal calculation The max_ratio is based on percentage. With the current machine sizes percentage values can be very high (1% of a 256GB main memory is already 2.5GB). This change uses part of 1000000 instead of percentages for the internal calculations. 3) Introduce two new sysfs knobs: min_bytes and max_bytes. Currently all calculations are based on ratio, but for a user it often more convenient to specify a limit in bytes. The new knobs will not store bytes values, instead they will translate the byte value to a corresponding ratio. As the internal values are now part of 1000, the ratio is closer to the specified value. However the value should be more seen as an approximation as it can fluctuate over time. 3) Introduce two new sysfs knobs: min_ratio_fine and max_ratio_fine. The granularity for the existing sysfs bdi knobs min_ratio and max_ratio is based on percentage values. The new sysfs bdi knobs min_ratio_fine and max_ratio_fine allow to specify the ratio as part of 1 million. This patch (of 20): This adds the bdi_set_strict_limit function to be able to set/unset the BDI_CAP_STRICTLIMIT flag. Link: https://lkml.kernel.org/r/20221119005215.3052436-1-shr@devkernel.io Link: https://lkml.kernel.org/r/20221119005215.3052436-2-shr@devkernel.ioSigned-off-by:
-
Randy Dunlap authored
Prevent a kconfig warning that is caused by TEST_MAPLE_TREE by adding a "depends on" clause for TEST_MAPLE_TREE since 'select' does not follow any kconfig dependencies. WARNING: unmet direct dependencies detected for DEBUG_MAPLE_TREE Depends on [n]: DEBUG_KERNEL [=n] Selected by [y]: - TEST_MAPLE_TREE [=y] && RUNTIME_TESTING_MENU [=y] Link: https://lkml.kernel.org/r/20221119055117.14094-1-rdunlap@infradead.org Fixes: 120b1162 ("maple_tree: reorganize testing to restore module testing") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Signed-off-by:
-
Alexander Potapenko authored
This reverts commit ac801e7e. The patch in question was picked to -mm from the KMSAN v6 patch series (https://lore.kernel.org/linux-mm/20220905122452.2258262-1-glider@google.com/) and sneaked into mainline despite its removal from the v7 series (https://lore.kernel.org/linux-mm/20220915150417.722975-1-glider@google.com/) Currently KMSAN does not warn about origin chains hitting the maximum depth, so keeping @tlb poisoned won't result in any inconveniences. Link: https://lkml.kernel.org/r/20221110113541.1844156-1-glider@google.comSigned-off-by:
Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Marco Elver <elver@google.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Signed-off-by:
-
Vishal Moola (Oracle) authored
There are no more callers of try_to_release_page(), so remove it. This saves 85 bytes of kernel text. Link: https://lkml.kernel.org/r/20221118073055.55694-5-vishal.moola@gmail.comSigned-off-by:
Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Vishal Moola (Oracle) authored
Replace try_to_release_page() with filemap_release_folio(). This change is in preparation for the removal of the try_to_release_page() wrapper. Link: https://lkml.kernel.org/r/20221118073055.55694-4-vishal.moola@gmail.comSigned-off-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Vishal Moola (Oracle) authored
Replace some calls with their folio equivalents. This change removes 4 calls to compound_head() and is in preparation for the removal of the try_to_release_page() wrapper. Link: https://lkml.kernel.org/r/20221118073055.55694-3-vishal.moola@gmail.comSigned-off-by:
-
Vishal Moola (Oracle) authored
Patch series "Removing the try_to_release_page() wrapper", v3. This patchset replaces the remaining calls of try_to_release_page() with the folio equivalent: filemap_release_folio(). This allows us to remove the wrapper. This patch (of 4): Convert move_extent_per_page() to use folios. This change removes 5 calls to compound_head() and is in preparation for the removal of the try_to_release_page() wrapper. Link: https://lkml.kernel.org/r/20221118073055.55694-1-vishal.moola@gmail.com Link: https://lkml.kernel.org/r/20221118073055.55694-2-vishal.moola@gmail.comSigned-off-by:
-
Mel Gorman authored
While freeing a large list, the zone lock will be released and reacquired to avoid long hold times since commit c24ad77d ("mm/page_alloc.c: avoid excessive IRQ disabled times in free_unref_page_list()"). As suggested by Vlastimil Babka, the lockrelease/reacquire logic can be simplified by reusing the logic that acquires a different lock when changing zones. Link: https://lkml.kernel.org/r/20221122131229.5263-3-mgorman@techsingularity.netSigned-off-by:
Mel Gorman <mgorman@techsingularity.net> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
Mel Gorman authored
The pcp_spin_lock_irqsave protecting the PCP lists is IRQ-safe as a task allocating from the PCP must not re-enter the allocator from IRQ context. In each instance where IRQ-reentrancy is possible, the lock is acquired using pcp_spin_trylock_irqsave() even though IRQs are disabled and re-entrancy is impossible. Demote the lock to pcp_spin_lock avoids an IRQ disable/enable in the common case at the cost of some IRQ allocations taking a slower path. If the PCP lists need to be refilled, the zone lock still needs to disable IRQs but that will only happen on PCP refill and drain. If an IRQ is raised when a PCP allocation is in progress, the trylock will fail and fallback to using the buddy lists directly. Note that this may not be a universal win if an interrupt-intensive workload also allocates heavily from interrupt context and contends heavily on the zone->lock as a result. [mgorman@techsingularity.net: migratetype might be wrong if a PCP was locked] Link: https://lkml.kernel.org/r/20221122131229.5263-2-mgorman@techsingularity.net [yuzhao@google.com: reported lockdep issue on IO completion from softirq] [hughd@google.com: fix list corruption, lock improvements, micro-optimsations] Link: https://lkml.kernel.org/r/20221118101714.19590-3-mgorman@techsingularity.netSigned-off-by:
-
Mel Gorman authored
Patch series "Leave IRQs enabled for per-cpu page allocations", v3. This patch (of 2): free_unref_page_list() has neglected to remove pages properly from the list of pages to free since forever. It works by coincidence because list_add happened to do the right thing adding the pages to just the PCP lists. However, a later patch added pages to either the PCP list or the zone list but only properly deleted the page from the list in one path leading to list corruption and a subsequent failure. As a preparation patch, always delete the pages from one list properly before adding to another. On its own, this fixes nothing although it adds a fractional amount of overhead but is critical to the next patch. Link: https://lkml.kernel.org/r/20221118101714.19590-1-mgorman@techsingularity.net Link: https://lkml.kernel.org/r/20221118101714.19590-2-mgorman@techsingularity.netSigned-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
-
Peter Xu authored
This test was overlooked with a hard-coded mntpoint path in test when we're removing the hugetlb mntpoint in commit 0796c7b8. Fix it up so the test can keep running. Link: https://lkml.kernel.org/r/Y3aojfUC2nSwbCzB@x1n Fixes: 0796c7b8 ("selftests/vm: drop mnt point for hugetlb in run_vmtests.sh") Signed-off-by:
Peter Xu <peterx@redhat.com> Reported-by:
Joel Savitz <jsavitz@redhat.com> Signed-off-by:
-
Sergey Senozhatsky authored
We don't show num_reads and num_writes since we removed corresponding sysfs nodes in 2017. Block layer stats are exposed via /sys/block/zramX/stat file. However, we still increment those atomic vars and store them in zram stats. Remove leftovers. Link: https://lkml.kernel.org/r/20221117141326.1105181-1-senozhatsky@chromium.orgSigned-off-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by:
-
Yang Li authored
mm/migrate.c:1198:24: warning: Using plain integer as NULL pointer Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3080 Link: https://lkml.kernel.org/r/20221116012345.84870-1-yang.lee@linux.alibaba.comSigned-off-by:
Yang Li <yang.lee@linux.alibaba.com> Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Yu Zhao authored
NODE_DATA() is preallocated for all possible nodes after commit 09f49dca ("mm: handle uninitialized numa nodes gracefully"). Checking its return value against NULL is now unnecessary. Link: https://lkml.kernel.org/r/20221116013808.3995280-2-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Signed-off-by:
-
David Hildenbrand authored
hugetlb does not support fake write-faults (write faults without write permissions). However, we are currently able to trigger a FAULT_FLAG_WRITE fault on a VMA without VM_WRITE. If we'd ever want to support FOLL_FORCE|FOLL_WRITE, we'd have to teach hugetlb to: (1) Leave the page mapped R/O after the fake write-fault, like maybe_mkwrite() does. (2) Allow writing to an exclusive anon page that's mapped R/O when FOLL_FORCE is set, like can_follow_write_pte(). E.g., __follow_hugetlb_must_fault() needs adjustment. For now, it's not clear if that added complexity is really required. History tolds us that FOLL_FORCE is dangerous and that we better limit its use to a bare minimum. -------------------------------------------------------------------------- #include <stdio.h> #include <stdlib.h> #include <fcntl.h> #include <unistd.h> #include <errno.h> #include <stdint.h> #include <sys/mman.h> #include <linux/mman.h> int main(int argc, char **argv) { char *map; int mem_fd; map = mmap(NULL, 2 * 1024 * 1024u, PROT_READ, MAP_PRIVATE|MAP_ANON|MAP_HUGETLB|MAP_HUGE_2MB, -1, 0); if (map == MAP_FAILED) { fprintf(stderr, "mmap() failed: %d\n", errno); return 1; } mem_fd = open("/proc/self/mem", O_RDWR); if (mem_fd < 0) { fprintf(stderr, "open(/proc/self/mem) failed: %d\n", errno); return 1; } if (pwrite(mem_fd, "0", 1, (uintptr_t) map) == 1) { fprintf(stderr, "write() succeeded, which is unexpected\n"); return 1; } printf("write() failed as expected: %d\n", errno); return 0; } -------------------------------------------------------------------------- Fortunately, we have a sanity check in hugetlb_wp() in place ever since commit 1d8d1464 ("mm/hugetlb: support write-faults in shared mappings"), that bails out instead of silently mapping a page writable in a !PROT_WRITE VMA. Consequently, above reproducer triggers a warning, similar to the one reported by szsbot: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 3612 at mm/hugetlb.c:5313 hugetlb_wp+0x20a/0x1af0 mm/hugetlb.c:5313 Modules linked in: CPU: 1 PID: 3612 Comm: syz-executor250 Not tainted 6.1.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/11/2022 RIP: 0010:hugetlb_wp+0x20a/0x1af0 mm/hugetlb.c:5313 Code: ea 03 80 3c 02 00 0f 85 31 14 00 00 49 8b 5f 20 31 ff 48 89 dd 83 e5 02 48 89 ee e8 70 ab b7 ff 48 85 ed 75 5b e8 76 ae b7 ff <0f> 0b 41 bd 40 00 00 00 e8 69 ae b7 ff 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc90003caf620 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000008640070 RCX: 0000000000000000 RDX: ffff88807b963a80 RSI: ffffffff81c4ed2a RDI: 0000000000000007 RBP: 0000000000000000 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000008c07e R12: ffff888023805800 R13: 0000000000000000 R14: ffffffff91217f38 R15: ffff88801d4b0360 FS: 0000555555bba300(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff7a47a1b8 CR3: 000000002378d000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> hugetlb_no_page mm/hugetlb.c:5755 [inline] hugetlb_fault+0x19cc/0x2060 mm/hugetlb.c:5874 follow_hugetlb_page+0x3f3/0x1850 mm/hugetlb.c:6301 __get_user_pages+0x2cb/0xf10 mm/gup.c:1202 __get_user_pages_locked mm/gup.c:1434 [inline] __get_user_pages_remote+0x18f/0x830 mm/gup.c:2187 get_user_pages_remote+0x84/0xc0 mm/gup.c:2260 __access_remote_vm+0x287/0x6b0 mm/memory.c:5517 ptrace_access_vm+0x181/0x1d0 kernel/ptrace.c:61 generic_ptrace_pokedata kernel/ptrace.c:1323 [inline] ptrace_request+0xb46/0x10c0 kernel/ptrace.c:1046 arch_ptrace+0x36/0x510 arch/x86/kernel/ptrace.c:828 __do_sys_ptrace kernel/ptrace.c:1296 [inline] __se_sys_ptrace kernel/ptrace.c:1269 [inline] __x64_sys_ptrace+0x178/0x2a0 kernel/ptrace.c:1269 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] So let's silence that warning by teaching GUP code that FOLL_FORCE -- so far -- does not apply to hugetlb. Note that FOLL_FORCE for read-access seems to be working as expected. The assumption is that this has been broken forever, only ever since above commit, we actually detect the wrong handling and WARN_ON_ONCE(). I assume this has been broken at least since 2014, when mm/gup.c came to life. I failed to come up with a suitable Fixes tag quickly. Link: https://lkml.kernel.org/r/20221031152524.173644-1-david@redhat.com Fixes: 1d8d1464 ("mm/hugetlb: support write-faults in shared mappings") Signed-off-by: -
David Hildenbrand authored
FOLL_FORCE is really only for ptrace access. As we unpin the pinned pages using unpin_user_pages_dirty_lock(true), the assumption is that all these pages are writable. FOLL_FORCE in this case seems to be due to copy-and-past from other drivers. Let's just remove it. Link: https://lkml.kernel.org/r/20221116102659.70287-20-david@redhat.comSigned-off-by:
Oded Gabbay <ogabbay@kernel.org> Cc: Oded Gabbay <ogabbay@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
David Hildenbrand authored
FOLL_FORCE is really only for ptrace access. As we unpin the pinned pages using unpin_user_pages_dirty_lock(true), the assumption is that all these pages are writable. FOLL_FORCE in this case seems to be a legacy leftover. Let's just remove it. Link: https://lkml.kernel.org/r/20221116102659.70287-19-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
FOLL_FORCE is really only for ptrace access. As we unpin the pinned pages using unpin_user_pages_dirty_lock(true), the assumption is that all these pages are writable. FOLL_FORCE in this case seems to be a legacy leftover. Let's just remove it. Link: https://lkml.kernel.org/r/20221116102659.70287-18-david@redhat.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Inki Dae <inki.dae@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: David Airlie <airlied@gmail.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
David Hildenbrand authored
FOLL_FORCE is really only for ptrace access. According to commit 70794724 ("media: videobuf2-vmalloc: get_userptr: buffers are always writable"), get_vaddr_frames() currently pins all pages writable as a workaround for issues with read-only buffers. FOLL_FORCE, however, seems to be a legacy leftover as it predates commit 70794724 ("media: videobuf2-vmalloc: get_userptr: buffers are always writable"). Let's just remove it. Once the read-only buffer issue has been resolved, FOLL_WRITE could again be set depending on the DMA direction. Link: https://lkml.kernel.org/r/20221116102659.70287-17-david@redhat.comSigned-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by:
Tomasz Figa <tfiga@chromium.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
-
David Hildenbrand authored
FOLL_FORCE is really only for ptrace access. R/O pinning a page is supposed to fail if the VMA misses proper access permissions (no VM_READ). Let's just remove FOLL_FORCE usage here; there would have to be a pretty good reason to allow arbitrary drivers to R/O pin pages in a PROT_NONE VMA. Most probably, FOLL_FORCE usage is just some legacy leftover. Link: https://lkml.kernel.org/r/20221116102659.70287-16-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
GUP now supports reliable R/O long-term pinning in COW mappings, such that we break COW early. MAP_SHARED VMAs only use the shared zeropage so far in one corner case (DAXFS file with holes), which can be ignored because GUP does not support long-term pinning in fsdax (see check_vma_flags()). commit cd5297b0 ("drm/etnaviv: Use FOLL_FORCE for userptr") documents that FOLL_FORCE | FOLL_WRITE was really only used for reliable R/O pinning. Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop using FOLL_FORCE, which is really only for ptrace access. Link: https://lkml.kernel.org/r/20221116102659.70287-15-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
GUP now supports reliable R/O long-term pinning in COW mappings, such that we break COW early. MAP_SHARED VMAs only use the shared zeropage so far in one corner case (DAXFS file with holes), which can be ignored because GUP does not support long-term pinning in fsdax (see check_vma_flags()). Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop using FOLL_FORCE, which is really only for ptrace access. Link: https://lkml.kernel.org/r/20221116102659.70287-14-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
GUP now supports reliable R/O long-term pinning in COW mappings, such that we break COW early. MAP_SHARED VMAs only use the shared zeropage so far in one corner case (DAXFS file with holes), which can be ignored because GUP does not support long-term pinning in fsdax (see check_vma_flags()). Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop using FOLL_FORCE, which is really only for ptrace access. Link: https://lkml.kernel.org/r/20221116102659.70287-13-david@redhat.comSigned-off-by:
Jason Gunthorpe <jgg@nvidia.com> Cc: Bernard Metzler <bmt@zurich.ibm.com> Cc: Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
David Hildenbrand authored
GUP now supports reliable R/O long-term pinning in COW mappings, such that we break COW early. MAP_SHARED VMAs only use the shared zeropage so far in one corner case (DAXFS file with holes), which can be ignored because GUP does not support long-term pinning in fsdax (see check_vma_flags()). Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop using FOLL_FORCE, which is really only for ptrace access. Link: https://lkml.kernel.org/r/20221116102659.70287-12-david@redhat.comSigned-off-by:
-
David Hildenbrand authored
GUP now supports reliable R/O long-term pinning in COW mappings, such that we break COW early. MAP_SHARED VMAs only use the shared zeropage so far in one corner case (DAXFS file with holes), which can be ignored because GUP does not support long-term pinning in fsdax (see check_vma_flags()). Consequently, FOLL_FORCE | FOLL_WRITE | FOLL_LONGTERM is no longer required for reliable R/O long-term pinning: FOLL_LONGTERM is sufficient. So stop using FOLL_FORCE, which is really only for ptrace access. Link: https://lkml.kernel.org/r/20221116102659.70287-11-david@redhat.com Tested-by: Leon Romanovsky <leonro@nvidia.com> [over mlx4 and mlx5] Signed-off-by:
-
