- 19 Mar, 2021 23 commits
-
-
Quentin Perret authored
In order to re-use some of the stage 2 setup code at EL2, factor parts of kvm_arm_setup_stage2() out into separate functions. No functional change intended. Acked-by:
Will Deacon <will@kernel.org> Signed-off-by:
Quentin Perret <qperret@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210319100146.1149909-23-qperret@google.com
-
Quentin Perret authored
Move the registers relevant to host stage 2 enablement to kvm_nvhe_init_params to prepare the ground for enabling it in later patches. Acked-by:
-
Quentin Perret authored
In order to make use of the stage 2 pgtable code for the host stage 2, change kvm_s2_mmu to use a kvm_arch pointer in lieu of the kvm pointer, as the host will have the former but not the latter. Acked-by:
-
Quentin Perret authored
In order to make use of the stage 2 pgtable code for the host stage 2, use struct kvm_arch in lieu of struct kvm as the host will have the former but not the latter. Acked-by:
-
Quentin Perret authored
Previous commits have introduced infrastructure to enable the EL2 code to manage its own stage 1 mappings. However, this was preliminary work, and none of it is currently in use. Put all of this together by elevating the mapping creation at EL2 when memory protection is enabled. In this case, the host kernel running at EL1 still creates _temporary_ EL2 mappings, only used while initializing the hypervisor, but frees them right after. As such, all calls to create_hyp_mappings() after kvm init has finished turn into hypercalls, as the host now has no 'legal' way to modify the hypevisor page tables directly. Acked-by:
-
Quentin Perret authored
When memory protection is enabled, the EL2 code needs the ability to create and manage its own page-table. To do so, introduce a new set of hypercalls to bootstrap a memory management system at EL2. This leads to the following boot flow in nVHE Protected mode: 1. the host allocates memory for the hypervisor very early on, using the memblock API; 2. the host creates a set of stage 1 page-table for EL2, installs the EL2 vectors, and issues the __pkvm_init hypercall; 3. during __pkvm_init, the hypervisor re-creates its stage 1 page-table and stores it in the memory pool provided by the host; 4. the hypervisor then extends its stage 1 mappings to include a vmemmap in the EL2 VA space, hence allowing to use the buddy allocator introduced in a previous patch; 5. the hypervisor jumps back in the idmap page, switches from the host-provided page-table to the new one, and wraps up its initialization by enabling the new allocator, before returning to the host. 6. the host can free the now unused page-table created for EL2, and will now need to issue hypercalls to make changes to the EL2 stage 1 mappings instead of modifying them directly. Note that for the sake of simplifying the review, this patch focuses on the hypervisor side of things. In other words, this only implements the new hypercalls, but does not make use of them from the host yet. The host-side changes will follow in a subsequent patch. Credits to Will for __pkvm_init_switch_pgd. Acked-by: -
Quentin Perret authored
We will soon need to turn the EL2 stage 1 MMU on and off in nVHE protected mode, so refactor the set_sctlr_el1 macro to make it usable for that purpose. Acked-by:
-
Quentin Perret authored
In order to re-map the guest vectors at EL2 when pKVM is enabled, refactor __kvm_vector_slot2idx() and kvm_init_vector_slot() to move all the address calculation logic in a static inline function. Acked-by:
-
Quentin Perret authored
We will need to do cache maintenance at EL2 soon, so compile a copy of __flush_dcache_area at EL2, and provide a copy of arm64_ftr_reg_ctrel0 as it is needed by the read_ctr macro. Signed-off-by:
-
Quentin Perret authored
Introduce the infrastructure in KVM enabling to copy CPU feature registers into EL2-owned data-structures, to allow reading sanitised values directly at EL2 in nVHE. Given that only a subset of these features are being read by the hypervisor, the ones that need to be copied are to be listed under <asm/kvm_cpufeature.h> together with the name of the nVHE variable that will hold the copy. This introduces only the infrastructure enabling this copy. The first users will follow shortly. Signed-off-by:
-
Quentin Perret authored
When memory protection is enabled, the hyp code will require a basic form of memory management in order to allocate and free memory pages at EL2. This is needed for various use-cases, including the creation of hyp mappings or the allocation of stage 2 page tables. To address these use-case, introduce a simple memory allocator in the hyp code. The allocator is designed as a conventional 'buddy allocator', working with a page granularity. It allows to allocate and free physically contiguous pages from memory 'pools', with a guaranteed order alignment in the PA space. Each page in a memory pool is associated with a struct hyp_page which holds the page's metadata, including its refcount, as well as its current order, hence mimicking the kernel's buddy system in the GFP infrastructure. The hyp_page metadata are made accessible through a hyp_vmemmap, following the concept of SPARSE_VMEMMAP in the kernel. Acked-by:
-
Quentin Perret authored
In order to use the kernel list library at EL2, introduce stubs for the CONFIG_DEBUG_LIST out-of-lines calls. Acked-by:
-
Quentin Perret authored
With nVHE, the host currently creates all stage 1 hypervisor mappings at EL1 during boot, installs them at EL2, and extends them as required (e.g. when creating a new VM). But in a world where the host is no longer trusted, it cannot have full control over the code mapped in the hypervisor. In preparation for enabling the hypervisor to create its own stage 1 mappings during boot, introduce an early page allocator, with minimal functionality. This allocator is designed to be used only during early bootstrap of the hyp code when memory protection is enabled, which will then switch to using a full-fledged page allocator after init. Acked-by:
-
Quentin Perret authored
In order to allow the usage of code shared by the host and the hyp in static inline library functions, allow the usage of kvm_nvhe_sym() at EL2 by defaulting to the raw symbol name. Acked-by:
-
Quentin Perret authored
kvm_call_hyp() has some logic to issue a function call or a hypercall depending on the EL at which the kernel is running. However, all the code compiled under __KVM_NVHE_HYPERVISOR__ is guaranteed to only run at EL2 which allows us to simplify. Add ifdefery to kvm_host.h to simplify kvm_call_hyp() in .hyp.text. Acked-by:
-
Quentin Perret authored
Currently, the hyp code cannot make full use of a bss, as the kernel section is mapped read-only. While this mapping could simply be changed to read-write, it would intermingle even more the hyp and kernel state than they currently are. Instead, introduce a __hyp_bss section, that uses reserved pages, and create the appropriate RW hyp mappings during KVM init. Acked-by:
-
Quentin Perret authored
In preparation for enabling the creation of page-tables at EL2, factor all memory allocation out of the page-table code, hence making it re-usable with any compatible memory allocator. No functional changes intended. Acked-by:
-
Quentin Perret authored
Currently, the KVM page-table allocator uses a mix of put_page() and free_page() calls depending on the context even though page-allocation is always achieved using variants of __get_free_page(). Make the code consistent by using put_page() throughout, and reduce the memory management API surface used by the page-table code. This will ease factoring out page-allocation from pgtable.c, which is a pre-requisite to creating page-tables at EL2. Acked-by:
-
Quentin Perret authored
Move the initialization of kvm_nvhe_init_params in a dedicated function that is run early, and only once during KVM init, rather than every time the KVM vectors are set and reset. This also opens the opportunity for the hypervisor to change the init structs during boot, hence simplifying the replacement of host-provided page-table by the one the hypervisor will create for itself. Acked-by:
-
Will Deacon authored
We will soon need to synchronise multiple CPUs in the hyp text at EL2. The qspinlock-based locking used by the host is overkill for this purpose and relies on the kernel's "percpu" implementation for the MCS nodes. Implement a simple ticket locking scheme based heavily on the code removed by commit c1109047 ("arm64: locking: Replace ticket lock implementation with qspinlock"). Signed-off-by:
-
Will Deacon authored
Pull clear_page(), copy_page(), memcpy() and memset() into the nVHE hyp code and ensure that we always execute the '__pi_' entry point on the offchance that it changes in future. [ qperret: Commit title nits and added linker script alias ] Signed-off-by:
-
Will Deacon authored
clear_page() and copy_page() are suitable for use outside of the kernel address space, so annotate them as position-independent code. Signed-off-by:
-
Marc Zyngier authored
Linux 5.12-rc3 Signed-off-by:
-
- 18 Mar, 2021 12 commits
-
-
Marc Zyngier authored
We re-enter the EL1 host with CPTR_EL2.TZ set in order to be able to lazily restore ZCR_EL2 when required. However, the same CPTR_EL2 configuration also leads to trapping when ZCR_EL2 is accessed from EL2. Duh! Clear CPTR_EL2.TZ *before* writing to ZCR_EL2. Fixes: beed0906 ("KVM: arm64: Trap host SVE accesses when the FPSIMD state is dirty") Reported-by:
-
Daniel Kiss authored
Now that KVM is equipped to deal with SVE on nVHE, remove the code preventing it from being used as well as the bits of documentation that were mentioning the incompatibility. Acked-by:
Daniel Kiss <daniel.kiss@arm.com> Signed-off-by:
-
Marc Zyngier authored
Implement the SVE save/restore for nVHE, following a similar logic to that of the VHE implementation: - the SVE state is switched on trap from EL1 to EL2 - no further changes to ZCR_EL2 occur as long as the guest isn't preempted or exit to userspace - ZCR_EL2 is reset to its default value on the first SVE access from the host EL1, and ZCR_EL1 restored to the default guest value in vcpu_put() Acked-by:
-
Marc Zyngier authored
ZCR_EL2 controls the upper bound for ZCR_EL1, and is set to a potentially lower limit when the guest uses SVE. In order to restore the SVE state on the EL1 host, we must first reset ZCR_EL2 to its original value. To make it as lazy as possible on the EL1 host side, set the SVE trapping in place when exiting from the guest. On the first EL1 access to SVE, ZCR_EL2 will be restored to its full glory. Suggested-by:
Andrew Scull <ascull@google.com> Acked-by:
-
Marc Zyngier authored
Make sure the guest's ZCR_EL1 is saved before we save/flush the state. This will be useful in later patches. Acked-by:
-
Marc Zyngier authored
When running on nVHE, and that the vcpu supports SVE, map the SVE state at EL2 so that KVM can access it. Acked-by:
-
Marc Zyngier authored
In order to keep the code readable, move the host-save/guest-restore sequences in their own functions, with the following changes: - the hypervisor ZCR is now set from C code - ZCR_EL2 is always used as the EL2 accessor This results in some minor assembler macro rework. No functional change intended. Acked-by:
-
Marc Zyngier authored
A common pattern is to conditionally update ZCR_ELx in order to avoid the "self-synchronizing" effect that writing to this register has. Let's provide an accessor that does exactly this. Acked-by:
-
Marc Zyngier authored
The KVM code contains a number of "sve_vq_from_vl(vcpu->arch.sve_max_vl)" instances, and we are about to add more. Introduce vcpu_sve_vq() as a shorthand for this expression. Acked-by:
-
Marc Zyngier authored
The vcpu_sve_pffr() returns a pointer, which can be an interesting thing to do on nVHE. Wrap the pointer with kern_hyp_va(), and take this opportunity to remove the unnecessary casts (sve_state being a void *). Acked-by:
-
Marc Zyngier authored
Switch to the unified EL1 accessors for ZCR_EL1, which will make things easier for nVHE support. Acked-by:
-
Marc Zyngier authored
as we are about to change the way KVM deals with SVE, provide KVM with its own save/restore SVE primitives. No functional change intended. Acked-by:
-
- 14 Mar, 2021 5 commits
-
-
Linus Torvalds authored
-
Alexey Dobriyan authored
Doing a prctl(PR_SET_MM, PR_SET_MM_AUXV, addr, 1); will copy 1 byte from userspace to (quite big) on-stack array and then stash everything to mm->saved_auxv. AT_NULL terminator will be inserted at the very end. /proc/*/auxv handler will find that AT_NULL terminator and copy original stack contents to userspace. This devious scheme requires CAP_SYS_RESOURCE. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of irqchip updates: - Make the GENERIC_IRQ_MULTI_HANDLER configuration correct - Add a missing DT compatible string for the Ingenic driver - Remove the pointless debugfs_file pointer from struct irqdomain" * tag 'irq-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/ingenic: Add support for the JZ4760 dt-bindings/irq: Add compatible string for the JZ4760B irqchip: Do not blindly select CONFIG_GENERIC_IRQ_MULTI_HANDLER ARM: ep93xx: Select GENERIC_IRQ_MULTI_HANDLER directly irqdomain: Remove debugfs_file from struct irq_domain
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fix from Thomas Gleixner: "A single fix in for hrtimers to prevent an interrupt storm caused by the lack of reevaluation of the timers which expire in softirq context under certain circumstances, e.g. when the clock was set" * tag 'timers-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: hrtimer: Update softirq_expires_next correctly after __hrtimer_get_next_event()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "A set of scheduler updates: - Prevent a NULL pointer dereference in the migration_stop_cpu() mechanims - Prevent self concurrency of affine_move_task() - Small fixes and cleanups related to task migration/affinity setting - Ensure that sync_runqueues_membarrier_state() is invoked on the current CPU when it is in the cpu mask" * tag 'sched-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/membarrier: fix missing local execution of ipi_sync_rq_state() sched: Simplify set_affinity_pending refcounts sched: Fix affine_move_task() self-concurrency sched: Optimize migration_cpu_stop() sched: Collate affine_move_task() stoppers sched: Simplify migration_cpu_stop() sched: Fix migration_cpu_stop() requeueing
-
