- 29 Feb, 2016 40 commits
-
-
Vitaly Kuznetsov authored
smp_read_barrier_depends() does nothing on almost all arcitectures including x86 and having it in the beginning of hv_get_ringbuffer_availbytes() does not provide any guarantees anyway. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit 45870a44) Signed-off-by:
Tim Gardner <tim.gardner@canonical.com>
-
Vitaly Kuznetsov authored
Convert 6+-string comments repeating function names to normal kernel-style comments and fix a couple of other comment style issues. No textual or functional changes intended. Signed-off-by:
-
Vitaly Kuznetsov authored
The crash is observed when a service is being disabled host side while userspace daemon is connected to the device: [ 90.244859] general protection fault: 0000 [#1] SMP ... [ 90.800082] Call Trace: [ 90.800082] [<ffffffff81187008>] __fput+0xc8/0x1f0 [ 90.800082] [<ffffffff8118716e>] ____fput+0xe/0x10 ... [ 90.800082] [<ffffffff81015278>] do_signal+0x28/0x580 [ 90.800082] [<ffffffff81086656>] ? finish_task_switch+0xa6/0x180 [ 90.800082] [<ffffffff81443ebf>] ? __schedule+0x28f/0x870 [ 90.800082] [<ffffffffa01ebbaa>] ? hvt_op_read+0x12a/0x140 [hv_utils] ... The problem is that hvutil_transport_destroy() which does misc_deregister() freeing the appropriate device is reachable by two paths: module unload and from util_remove(). While module unload path is protected by .owner in struct file_operations util_remove() path is not. Freeing the device while someone holds an open fd for it is a show stopper. In general, it is not possible to revoke an fd from all users so the only way to solve the issue is to defer freeing the hvutil_transport structure. Signed-off-by:
-
Vitaly Kuznetsov authored
When Hyper-V host asks us to remove some util driver by closing the appropriate channel there is no easy way to force the current file descriptor holder to hang up but we can start to respond -EBADF to all operations asking it to exit gracefully. As we're setting hvt->mode from two separate contexts now we need to use a proper locking. Signed-off-by:
-
Vitaly Kuznetsov authored
As a preparation to reusing outmsg_lock to protect test-and-set openrations on 'mode' rename it the more general 'lock'. Signed-off-by:
-
Vitaly Kuznetsov authored
inmsg should be freed in case of on_msg() failure to avoid memory leak. Preserve the error code from on_msg(). Signed-off-by:
-
Dexuan Cui authored
Fix the write()'s argument in the daemon code. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by:
-
K. Y. Srinivasan authored
When the handshake with daemon is complete, we should poll the channel since during the handshake, we will not be processing any messages. This is a potential bug if the host is waiting for a response from the guest. I would like to thank Dexuan for pointing this out. Signed-off-by:
-
K. Y. Srinivasan authored
Force all channel messages to be delivered on CPU0. These messages are not performance critical and are used during the setup and teardown of the channel. Signed-off-by:
-
Andrey Smetanin authored
Hypervisor Top Level Functional Specification v3/4 says that TSC page sequence value = -1(0xFFFFFFFF) is used to indicate that TSC page no longer reliable source of reference timer. Unfortunately, we found that Windows Hyper-V guest side implementation uses sequence value = 0 to indicate that Tsc page no longer valid. This is clearly visible inside Windows 2012R2 ntoskrnl.exe HvlGetReferenceTime() function dissassembly: HvlGetReferenceTime proc near xchg ax, ax loc_1401C3132: mov rax, cs:HvlpReferenceTscPage mov r9d, [rax] test r9d, r9d jz short loc_1401C3176 rdtsc mov rcx, cs:HvlpReferenceTscPage shl rdx, 20h or rdx, rax mov rax, [rcx+8] mov rcx, cs:HvlpReferenceTscPage mov r8, [rcx+10h] mul rdx mov rax, cs:HvlpReferenceTscPage add rdx, r8 mov ecx, [rax] cmp ecx, r9d jnz short loc_1401C3132 jmp short loc_1401C3184 loc_1401C3176: mov ecx, 40000020h rdmsr shl rdx, 20h or rdx, rax loc_1401C3184: mov rax, rdx retn HvlGetReferenceTime endp This patch aligns Tsc page invalid sequence value with Windows Hyper-V guest implementation which is more compatible with both Hyper-V hypervisor and KVM hypervisor. Signed-off-by:Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by:
Denis V. Lunev <den@openvz.org> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
K. Y. Srinivasan authored
Currently we have two policies for deciding when to signal the host: One based on the ring buffer state and the other based on what the VMBUS client driver wants to do. Consider the case when the client wants to explicitly control when to signal the host. In this case, if the client were to defer signaling, we will not be able to signal the host subsequently when the client does want to signal since the ring buffer state will prevent the signaling. Implement logic to have only one signaling policy in force for a given channel. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Tested-by:
-
Jake Oshins authored
This patch makes 16GB GPUs work in Hyper-V VMs, since, for compatibility reasons, the Hyper-V BIOS lists MMIO ranges in 2GB chunks in its root bus's _CRS object. Signed-off-by:
Jake Oshins <jakeo@microsoft.com> Signed-off-by:
-
Dexuan Cui authored
spinlock is unnecessary here. mutex is enough. Signed-off-by:
-
Dexuan Cui authored
We want to simplify vmbus_onoffer_rescind() by not invoking hv_process_channel_removal(NULL, ...). Signed-off-by:
-
Dexuan Cui authored
In the path vmbus_onoffer_rescind() -> vmbus_device_unregister() -> device_unregister() -> ... -> __device_release_driver(), we can see for a device without a driver loaded: dev->driver is NULL, so dev->bus->remove(dev), namely vmbus_remove(), isn't invoked. As a result, vmbus_remove() -> hv_process_channel_removal() isn't invoked and some cleanups(like sending a CHANNELMSG_RELID_RELEASED message to the host) aren't done. We can demo the issue this way: 1. rmmod hv_utils; 2. disable the Heartbeat Integration Service in Hyper-V Manager and lsvmbus shows the device disappears. 3. re-enable the Heartbeat in Hyper-V Manager and modprobe hv_utils, but lsvmbus shows the device can't appear again. This is because, the host thinks the VM hasn't released the relid, so can't re-offer the device to the VM. We can fix the issue by moving hv_process_channel_removal() from vmbus_close_internal() to vmbus_device_release(), since the latter is always invoked on device_unregister(), whether or not the dev has a driver loaded. Signed-off-by:
-
Dexuan Cui authored
This fixes an incorrect assumption of channel state in the function. Signed-off-by:
-
Dexuan Cui authored
process_chn_event(), running in the tasklet, can race with vmbus_close_internal() in the case of SMP guest, e.g., when the former is accessing channel->inbound.ring_buffer, the latter could be freeing the ring_buffer pages. To resolve the race, we can serialize them by disabling the tasklet when the latter is running here. Signed-off-by:
-
K. Y. Srinivasan authored
The irq we extract from ACPI is not used - we deliver hypervisor interrupts on a special vector. Make the necessary adjustments. Signed-off-by:
-
K. Y. Srinivasan authored
The macro VMBUS_DEVICE() is unused; get rid of it. Signed-off-by:
-
K. Y. Srinivasan authored
Use uuid_le_cmp() for comparing GUIDs. Signed-off-by:
-
K. Y. Srinivasan authored
Consistently use uuid_le type in the Hyper-V driver code. Signed-off-by:
-
Olaf Hering authored
The Backup integration service on WS2012 has appearently trouble to negotiate with a guest which does not support the provided util version. Currently the VSS driver supports only version 5/0. A WS2012 offers only version 1/x and 3/x, and vmbus_prep_negotiate_resp correctly returns an empty icframe_vercnt/icmsg_vercnt. But the host ignores that and continues to send ICMSGTYPE_NEGOTIATE messages. The result are weird errors during boot and general misbehaviour. Check the Windows version to work around the host bug, skip hv_vss_init on WS2012 and older. Signed-off-by:
Olaf Hering <olaf@aepfle.de> Signed-off-by:
-
Jake Oshins authored
This defines the channel type for PCI front-ends in Hyper-V VMs. Signed-off-by:
-
Jake Oshins authored
This patch exposes the function that hv_vmbus.ko uses to make hypercalls. This is necessary for retargeting an interrupt when it is given a new affinity. Since we are exporting this API, rename the API as it will be visible outside the hv.c file. Signed-off-by:
-
Jake Oshins authored
This patch exposes the mapping between Linux CPU number and Hyper-V virtual processor number. This is necessary because the hypervisor needs to know which virtual processors to target when making a mapping in the Interrupt Redirection Table in the I/O MMU. Signed-off-by:
-
Andrey Smetanin authored
Before vmbus_connect() synic is setup per vcpu - this means hypervisor receives writes at synic msr's and probably allocate hypervisor resources per synic setup. If vmbus_connect() failed for some reason it's neccessary to cleanup synic setup by call hv_synic_cleanup() at each vcpu to get a chance to free allocated resources by hypervisor per synic. This patch does appropriate cleanup in case of vmbus_connect() failure. Signed-off-by:
-
Olaf Hering authored
Use memdup_user to handle OOM. Fixes: 14b50f80 ('Drivers: hv: util: introduce hv_utils_transport abstraction') Signed-off-by:
-
Olaf Hering authored
Catch allocation errors in hvutil_transport_send. Fixes: 14b50f80 ('Drivers: hv: util: introduce hv_utils_transport abstraction') Signed-off-by:
-
Olaf Hering authored
HV_FCOPY is already used as identifier in syslog. Signed-off-by:
-
Olaf Hering authored
Currently some "Unspecified error 0x80004005" is reported on the Windows side if something fails. Handle the ENOSPC case and return ERROR_DISK_FULL, which allows at least Copy-VMFile to report a meaning full error. Signed-off-by:
-
Olaf Hering authored
All channel interrupts are bound to specific VCPUs in the guest at the point channel is created. While currently, we invoke the polling function on the correct CPU (the CPU to which the channel is bound to) in some cases we may run the polling function in a non-interrupt context. This potentially can cause an issue as the polling function can be interrupted by the channel callback function. Fix the issue by running the polling function on the appropriate CPU at interrupt level. Additional details of the issue being addressed by this patch are given below: Currently hv_fcopy_onchannelcallback is called from interrupts and also via the ->write function of hv_utils. Since the used global variables to maintain state are not thread safe the state can get out of sync. This affects the variable state as well as the channel inbound buffer. As suggested by KY adjust hv_poll_channel to always run the given callback on the cpu which the channel is bound to. This avoids the need for locking because all the util services are single threaded and only one transaction is active at any given point in time. Additionally, remove the context variable, they will always be the same as recv_channel. Signed-off-by:
-
K. Y. Srinivasan authored
Util services such as KVP and FCOPY need assistance from daemon's running in user space. Increase the timeout so we don't prematurely terminate the transaction in the kernel. Host sets up a 60 second timeout for all util driver transactions. The host will retry the transaction if it times out. Set the guest timeout at 30 seconds. Signed-off-by:
-
Sudip Mukherjee authored
We were getting build warning about unused variable "tsc_msr" and "va_tsc" while building for i386 allmodconfig. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Arnd Bergmann authored
intel/i40e/i40e_txrx.c: In function 'i40e_xmit_frame_ring': intel/i40e/i40e_txrx.c:2367:20: error: 'oiph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2317:16: note: 'oiph' was declared here intel/i40e/i40e_txrx.c:2367:17: error: 'oudph' may be used uninitialized in this function [-Werror=maybe-uninitialized] intel/i40e/i40e_txrx.c:2316:17: note: 'oudph' was declared here Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> (cherry picked from commit 79febbc1) Signed-off-by:
-
Eric Dumazet authored
Fixes following build warnings : drivers/net/ethernet/intel/i40e/i40e_main.c:7057:13: warning: 'i40e_sync_udp_filters_subtask' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8524:13: warning: 'i40e_add_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8569:13: warning: 'i40e_del_vxlan_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8604:13: warning: 'i40e_add_geneve_port' defined but not used [-Wunused-function] drivers/net/ethernet/intel/i40e/i40e_main.c:8651:13: warning: 'i40e_del_geneve_port' defined but not used [-Wunused-function] Fixes: 6a899024 ("i40e: geneve tunnel offload support") Signed-off-by:
Eric Dumazet <edumazet@google.com> Tested-by:
-
Tim Gardner authored
BugLink: http://bugs.launchpad.net/bugs/1531539Signed-off-by:
-
Keith Busch authored
BugLink: http://bugs.launchpad.net/bugs/1531539 Adds all controller information to attribute list exposed to sysfs, and appends the reset_controller attribute to it. The nvme device is created with this attribute list, so driver no long manages its attributes. Reported-by:
Sujith Pandel <sujithpshankar@gmail.com> Cc: Sujith Pandel <sujithpshankar@ gmail.com> Cc: David Milburn <dmilburn@redhat.com> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@fb.com> (cherry picked from commit 779ff756) Signed-off-by:
-
Keith Busch authored
BugLink: http://bugs.launchpad.net/bugs/1531539 We don't need to shutdown a controller for a reset. A controller in a shutdown state may take longer to become ready than one that was simply disabled. This patch has the driver shut down a controller only if the device is about to be powered off or being removed. When taking the controller down for a reset reason, the controller will be disabled instead. Function names have been updated in this patch to reflect their changed semantics. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Keith Busch authored
BugLink: http://bugs.launchpad.net/bugs/1531539 The nvme driver deletes IO queues asynchronously since this operation may potentially take an undesirable amount of time with a large number of queues if done serially. The driver used to manage coordinating asynchronous deletions. This patch simplifies that by leveraging the block layer rather than using kthread workers and chaining more complicated callbacks. Signed-off-by:
-
Keith Busch authored
BugLink: http://bugs.launchpad.net/bugs/1531539 NVMe submits all commands through the block layer now. This means we can let requests queue at the blk-mq hardware context since there is no path that bypasses this anymore so we don't need to freeze the queues anymore. The driver can simply stop the h/w queues from running during a reset instead. This also fixes a WARN in percpu_ref_reinit when the queue was unfrozen with requeued requests. Signed-off-by:
-
