- 19 Aug, 2013 21 commits
-
-
Rob Clark authored
Basically just extracting some code duplicated in gma500, omapdrm, udl, and upcoming msm driver. Signed-off-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Rob Clark authored
Variant of drm_gem_create_mmap_offset() which doesn't make the assumption that virtual size and physical size (obj->size) are the same. This is needed in omapdrm to deal with tiled buffers. And lets us get rid of a duplicated and slightly modified version of drm_gem_create_mmap_offset() in omapdrm. Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
Rob Clark authored
And simplify how we hold a ref+pin to what is being scanned out by using fb refcnt'ing. The previous logic pre-dated fb refcnt, and as a result was less straightforward than it could have been. By holding a ref to the fb, we don't have to care about how many plane's there are and holding a ref to each color plane's bo. Signed-off-by:
-
Rob Clark authored
Signed-off-by:
Darren Etheridge <detheridge@ti.com> Signed-off-by:
-
Rob Clark authored
A small helper to queue up work to do, from workqueue context, after a flip. Typically useful to defer unreffing buffers that may be read by the display controller until vblank. v1: original v2: wire up docbook + couple docbook fixes Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Stéphane Marchesin authored
This function is unused. Signed-off-by:
Stéphane Marchesin <marcheu@chromium.org> Reviewed-by:
-
Daniel Vetter authored
Again only used by a tests in libdrm and by dristat. Nowadays we have much better tracing tools to get detailed insights into what a drm driver is doing. And for a simple "does it work" kind of question that these stats could answer we have plenty of dmesg debug log spew. So I don't see any use for this stat gathering complexity at all. To be able to gradually drop things start with ripping out the interfaces to it, here the ioctl. To prevent dristat from eating its own stack garbage we can't use the drm_noop ioctl though, since we need to clear the return data with a memset. Cc: Eric Anholt <eric@anholt.net> Signed-off-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Daniel Vetter authored
We not only have debugfs files to do pretty much the equivalent of lsof, we also have an ioctl. Not that compared to lsof this dumps a wee bit more information, but we can still get at that from debugfs easily. I've dug around in mesa, libdrm and ddx histories and the only users seem to be drm/tests/dristat.c and drm/tests/getclients.c. The later is a testcase for the ioctl itself since up to commit b018fcda Author: Eric Anholt <eric@anholt.net> Date: Thu Nov 22 18:46:54 2007 +1000 drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx there was actually no way at all for userspace to enumerate all clients since the kernel just wouldn't tell it when to stop. Which completely broke it's only user, dristat -c. So obviously that ioctl wasn't much use for debugging. Hence I don't see any point in keeping support for a tool which was pretty obviously never really used, and while we have good replacements in the form of equivalent debugfs files. Still, to keep dristat -c from looping forever again stop it early by returning an unconditional -EINVAL. Also add a comment in the code about why. v2: Slightly less hollowed-out implementation. libva uses GET_CLIENTS to figure out whether the fd it has is already authenticated or not. So we need to keep that part of things working. Simplest way is to just return one entry to keep va_drm_is_authenticated in libva/va/drm/va_drm_auth.c working. This is exercised by igt/drm_get_client_auth which contains a copypasta of the libva auth check code. Cc: Gwenole Beauchesne <gwenole.beauchesne@intel.com> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
-
Daniel Vetter authored
They're only used by the agpgart support code in drm_agpgart.c, not by any drivers. I think long-term we should create a drm_internal.h include file with all the various functions only used by the drm core and not exported to drivers, and remove them from drmP.h. Oh, and someone should kill that upper-case P sometimes ;-) But that's all stuff for future patch bombs. Signed-off-by:
-
Daniel Vetter authored
Signed-off-by:
-
Daniel Vetter authored
The gma500 driver somehow set the DRIVER_IRQ_VBL flag, but since there's no code at all to check for this we can kill it. The other two are completely unused. Signed-off-by:
-
Daniel Vetter authored
No driver ever sets that flag, so good riddance! Signed-off-by:
-
Daniel Vetter authored
So I've stumbled over drm_fasync and wondered what it does. Digging that up is quite a story. First I've had to read up on what this does and ended up being rather bewildered why peopled loved signals so much back in the days that they've created SIGIO just for that ... Then I wondered how this ever works, and what that strange "No-op." comment right above it should mean. After all calling the core fasync helper is pretty obviously not a noop. After reading through the kernels FASYNC implementation I've noticed that signals are only sent out to the processes attached with FASYNC by calling kill_fasync. No merged drm driver has ever done that. After more digging I've found out that the only driver that ever used this is the so called GAMMA driver. I've frankly never heard of such a gpu brand ever before. Now FASYNC seems to not have been the only bad thing with that driver, since Dave Airlie removed it from the drm driver with prejudice: commit 1430163b4bbf7b00367ea1066c1c5fe85dbeefed Author: Dave Airlie <airlied@linux.ie> Date: Sun Aug 29 12:04:35 2004 +0000 Drop GAMMA DRM from a great height ... Long story short, the drm fasync support seems to be doing absolutely nothing. And the only user of it was never merged into the upstream kernel. And we don't need any fops->fasync callback since the fcntl implementation in the kernel already implements the noop case correctly. So stop this particular cargo-cult and rip it all out. v2: Kill drm_fasync assignments in rcar (newly added) and imx drivers (somehow I've missed that one in staging). Also drop the reference in the drm DocBook. ARM compile-fail reported by Rob Clark. v3: Move the removal of dev->buf_asnyc assignment in drm_setup to this patch here. v4: Actually git add ... tsk. Cc: Dave Airlie <airlied@linux.ie> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Rob Clark <robdclark@gmail.com> Acked-by:Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Daniel Vetter authored
It's kzalloced ... Signed-off-by:
-
Daniel Vetter authored
So after a lot of digging around in git histories it looks like this has only ever be used by dri1 render clients. Hence we can fully disable the entire thing for modesetting drivers and so greatly reduce the attack surface for potential exploits (or at least tools like trinity ...). Also add the drm_legacy prefix for functions which are called from common code. To further reduce the impact on common code also extract all the ctx release handling into a function (instead of only releasing individual handles) and make ctxbitmap_cleanup return void - it can never fail. Reviewed-by:
-
Daniel Vetter authored
Now only legacy ums drivers have the DRIVER_HAVE_DMA driver feature flag set, so strictly speaking the modesetting check is redundant. But adding it has the upside that it makes it very clear that the dma support is legacy stuff. Reviewed-by:
-
Daniel Vetter authored
And hide the checks a bit better. This was already disallowed for modesetting drivers, so no functinal change here. Reviewed-by:
-
Daniel Vetter authored
Only the radeon/r128/ati ums drivers use this. Furthermore the cleanup was already only done for UMS drivers. Also a quick check of the ATI ddx git history shows that only the UMS code ever used this facility. So we can safely disallow these pair of ioctls for modesetting drivers. Reviewed-by:
-
Daniel Vetter authored
I've decided that some clear markers for what's legacy dri1/non-gem code is useful. I've opted to use the drm_legacy prefix and then hide all the checks in that function for better readability in the common code. Reviewed-by:
-
Daniel Vetter authored
Totally unused, so just rip it out. Anyway, we want drivers to be fully backwards compatible, allowing them to change behaviour is just a recipe for them to break badly. Reviewed-by:
-
Daniel Vetter authored
Again, it does nothing. Signed-off-by:
-
- 18 Aug, 2013 17 commits
-
-
Daniel Vetter authored
KMS drivers really shouldn't need to do anything on firstopen, so kill empty callbacks. Signed-off-by:
-
Maarten Lankhorst authored
Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
David Herrmann authored
This field is never read. No need to set it in radeon. Besides, DRM gem core clears it during setup, anyway. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
David Herrmann authored
These two helpers are unused. Remove them. They rely on gem_obj->driver_private, which is set to NULL during setup. As this field isn't used by the driver, anymore, we can remove this assignment as well. Signed-off-by:
-
David Herrmann authored
gem_bo->driver_private is never read by cirrus nor DRM core. No need to set it. Besides, drm core clears it during setup, anyway. Signed-off-by:
-
David Herrmann authored
gem_bo->driver_private is never read by mgag200 nor DRM core. No need to set it. Besides, drm core clears it during setup, anyway. Signed-off-by:
-
David Herrmann authored
gem_bo->driver_private is never read by ast nor DRM core. No need to set it. Besides, drm core clears it during setup, anyway. Signed-off-by:
-
Dave Airlie authored
Merge the rcar stable branch that is being shared with the arm-soc tree. Signed-off-by: -
Darren Etheridge authored
Add a fixup function that will flip the hsync priority and add a hskew value that is used to shift the tda998x to the right by a variable number of pixels depending on the mode. This works around an issue with the sync timings that tilcdc is outputing. Signed-off-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by:
Russell King <rmk_kernel@arm.linux.org.uk> Signed-off-by:
-
Sebastian Hesselbarth authored
Some LCD controller cannot provide valid VESA style sync, i.e. coincident HS/VS edges. First, this patch adds hskew passed from the adjusted_mode to reference pixel calculation to allow those controllers to add an offset relative to the expected reference pixel. Signed-off-by:
-
Sebastian Hesselbarth authored
This fixes the wrong sync generation and sync calculation of TDA998x for HS/VS-based sync detection. Signed-off-by:
-
Russell King authored
This patch adds tda998x specific parameters to allow it to be configured for different boards using it. Also, this implements rudimentary audio support for S/PDIF attached controllers. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Russell King authored
The video-input-port (VIP) is highly configurable. This prepares current driver to allow to configure VIP configuration, as some boards connect lcd controller and TDA998x "pin-swapped" and depend on VIP to swap the pins by register configuration. Signed-off-by:
-
Russell King authored
The npix/nline registers are supposed to be programmed with the total number of pixels/lines, not the displayed pixels/lines, and not minus one either. Signed-off-by:
-
Russell King authored
When switching between various drivers for this device, it's possible that some critical registers are left containing values which affect the device operation. One such case encountered is the VIP output mux register. This defaults to 0x24 on powerup, but other drivers may set this to 0x12. This results in incorrect colours. Fix this by ensuring that the register is always set to the power on default setting. Signed-off-by:
-
Russell King authored
TDA19988 devices need their RAM enabled in order to read EDID information. Add support for this. Signed-off-by:
-
Geert Uytterhoeven authored
If NO_DMA=y: drivers/built-in.o: In function `__drm_pci_free': drivers/gpu/drm/drm_pci.c:112: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `drm_pci_alloc': drivers/gpu/drm/drm_pci.c:72: undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `drm_gem_unmap_dma_buf': drivers/gpu/drm/drm_prime.c:87: undefined reference to `dma_unmap_sg' drivers/built-in.o: In function `drm_gem_map_dma_buf': drivers/gpu/drm/drm_prime.c:78: undefined reference to `dma_map_sg' Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
- 09 Aug, 2013 2 commits
-
-
git://linuxtv.org/pinchartl/fbdevDave Airlie authored
Create topic branch for rcar for shmobile tree to pull as well, arm-soc should probably merge after drm merges if possible. Signed-off-by:
-
Laurent Pinchart authored
Use the FB CMA helpers to implement FBDEV emulation support. The VGA connector status must be reported as connector_status_connected instead of connector_status_unknown to be usable by the emulation layer. Signed-off-by:Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
-
