- 11 May, 2007 40 commits
-
-
Takashi Iwai authored
Some boards have the audio codec on slot #3 while the modem codec on slot #0. The driver should continue to probe the slots when no audio codec is found. This fixes the problem of no device on Toshiba A100 (and some other ATI SB450 devices). Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jaroslav Kysela <perex@suse.cz>
-
Takashi Iwai authored
Use PIN_HP output type for HP pin widgets accordingly, instead of always applying PIN_OUT. Signed-off-by:
-
Takashi Iwai authored
Added line_out_type field to auto_pin_cfg struct to provide the pin type of default line_outs. Signed-off-by:
-
Tobin Davis authored
This patch adds support for the Asus A8JN Laptop. Other modes were tested, this one worked best. Signed-off-by:
Tobin Davis <tdavis@dsl-only.net> Signed-off-by:
-
Akinobu Mita authored
The platform_device allocated by platform_device_alloc() should be added to the device hierarchy by platform_device_add() instead of platform_device_register(). Otherwise it will hit WARN_ON() in platform_device_register(). by illegal refcount. This patch fixes such incorrect usages in portman2x4 and mts64 drivers. Also it removes unnecessary trailing whitespaces. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Fix the auto-configuration of 8-channel devices. The sequence numbers of usual 7.1 outputs are: 0/1/2/4 = Front/CLFE/Rear/Side Signed-off-by:
-
Takashi Iwai authored
When intel8x0 driver is loaded in the crash kernel, it gets Oops occasionally. This is because the irq handler gets called before the proper hardware initialization. Now defer it after snd_intel8x0_chip_init(). (reference: http://lkml.org/lkml/2007/3/5/252) Signed-off-by:
-
Milind Arun Choudhary authored
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead Signed-off-by:
Milind Arun Choudhary <milindchoudhary@gmail.com> Signed-off-by:
-
Tobin Davis authored
Added the support for Gigabyte S-Series GA-M57SLI-S4 motherboard (model=6stack-dig). Signed-off-by:
-
Takashi Iwai authored
Fix surround output on AD1986A codec 3stack model. The following bugs are fixed: - init verbs for 3stack disabled the shared surround outputs - a channel mode change resulted in the mute of surrounds Signed-off-by:
-
Liam Girdwood authored
This patch makes the ASoC Kconfig descriptions a little more meaningful. Signed-off-by:
Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by:
-
Graeme Gregory authored
This patch adds DMA size fields to the S3C24xx audio DMA params and exports the S3C24xx I2S digital audio interface. Signed-off-by:
Graeme Gregory <gg@opensource.wolfsonmicro.com> Signed-off-by:
-
Graeme Gregory authored
This patch cleans up the audio DMA for the Samsung S3C24xx platform. Signed-off-by:
-
Abhijit Bhopatkar authored
First generation MacBooks were getting ignored by sigmatel drivers and wrongly being identified as MACMINI. This patch makes them identify as MACBOOK. Signed-off-by:
Abhijit Bhopatkar <bainonline@gmail.com> Signed-off-by:
-
Graeme Gregory authored
This patch exports the ASoC AC97 Digital Audio Interface as a GPL'ed symbol. Signed-off-by:
-
Liam Girdwood authored
This patch adds the WM8753 codec driver to the kernel build system. Signed-off-by:
-
Liam Girdwood authored
This patch series adds support for the WM8753 codec as found on the OpenMoko Neo 1973 (other Neo 1973 and Samsung S3C24xx patches to follow today) as well other new devices. Features:- o HiFi and Voice DAI supported (inc runtime switching of DAI mode) o DAPM o All mixers o PLL calculator o 16,20 and 24bit samples. o WM8753 I2C ID added to include/linux/i2c-id.h From: Liam Girdwood <lg@opensource.wolfsonmicro.com> Signed-off-by:
Harald Welte <laforge@openmoko.org> Signed-off-by:
Seth Forshee <seth.forshee@gmail.com> Signed-off-by:
-
Frank Mandarino authored
This patch by Frank Madarino updates the AT91xxxx Makefile and Kconfig to build the renamed SSC files. Changes:- o Rename various i2s labels to ssc Signed-off-by:
Frank Mandarino <fmandarino@endrelia.com> Signed-off-by:
-
Frank Mandarino authored
This patch by Frank Madarino updates the eti B1 machine to use the newer AT91xxxx SSC core with the DSP/PCM audio hardware changes. Changes:- o #include 'at91-ssc.h' instead of 'at91-i2s.h' o Rename various I2S labels to SSC Signed-off-by:
-
Frank Mandarino authored
This patch series by Frank Madarino updates the AT91xxxx core to add DSP/PCM audio hardware formats. Changes:- o Rename at19-i2s.c -> at91-ssc.c o Rename at91-i2s.h -> at91-ssc.h o Add DSP hardware formats. o Rename various I2S labels to SSC Signed-off-by:
-
Seth Forshee authored
This patch fixes an issue whereby power was applied to any inactive analog path that would leave and reenter a codec (e.g. ACOP -> ACIN on WM8753). This change now checks for such paths and DAPM will power them down when not in use. Signed-off-by:
-
Graeme Gregory authored
This patch creates the WM9712 codec register cache using kmemdup instead of doing a kzalloc followed by a memcpy. Signed-off-by:
-
Takashi Iwai authored
Fixed MAINTAINERS, alsa-devel ML is now subscribers-only. Signed-off-by:
-
Takashi Iwai authored
Trivial code clean-ups to follow the standard coding styles. Signed-off-by:
-
Takashi Iwai authored
Merge hda-codec module to a single hda-intel module since this is the only user right now. Although hda-codec stuff is designed to be used universally from different controller drivers, currently only one controller interface (and compatibles) are used. So, let's merge them to a single module to save memory. Signed-off-by:
-
Takashi Iwai authored
Allow opening the dedicated SPDIF stream while running on analog dup mode. Then the SPDIF stream is once reset and assigned for the new stream. It's useful for exclusive SPDIF output like AC3/DTS. (In the former version, you had to close once the analog stream to play the exclusive digital stream.) Signed-off-by:
-
Takashi Iwai authored
Trivial code clean-ups of patch_realtek.c: indent and whitespace fixes. Signed-off-by:
-
Takashi Iwai authored
Added the support of 96kHz sample rate back. Although the rate isn't listed in the ACC_PAR_PCM bits but si3054 codecs do support this rate explicitly. Now fixed the deteciton code not to check this extra bit. Signed-off-by:
-
Kailang Yang authored
- Add ALC662 support - Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL] - Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V] - Add SKU ID for auto mode Signed-off-by:
Kailang Yang <kailang@realtek.com.tw> Signed-off-by:
-
Pavel Hofman authored
Fixes: -------- * correct card specific ice1724 initialization * working IEC958 output of the card * renamed capture controls New features: ------------------ * analog input switch (line-in/mic) * optional ak4114 based MI/ODI/O card detection & support: IEC958 input, digital input switch (toslink/coax) Unresolved issues ----------------------- * Analog and digital input enums are listed on playback panel of alsamixer, I do not know how to push them onto the capture one. Signed-off-by:
Pavel Hofman <dustin@seznam.cz> Signed-off-by:
-
Takashi Iwai authored
Added some comments regarding naming of PCM streams on vt172x chip. Signed-off-by:
-
Takashi Iwai authored
Call snd_ak4114_build() in juli support code to build proper mixer elements for SPDIF inputs. Signed-off-by:
-
Pavel Hofman authored
* correct register for 'IEC958 Non-PCM Bitstream', 'IEC958 DTS Bitstream' to use AK4114_REG_RCS0 * correct check for control name: if (strstr(kctl->id.name, 'Playback')) * correct check: if (!chip->init) in snd_ak4114_external_rate * added PCM control 'IEC958 PPL Lock Status' Signed-off-by:
-
Frederik Deweerdt authored
When launching 'jackd -d alsa', lockdep issues the following warning: [39701.405086] ============================================= [39701.405093] [ INFO: possible recursive locking detected ] [39701.405107] 2.6.21-rc5-mm4 #2 [39701.405109] --------------------------------------------- [39701.405112] jackd/17366 is trying to acquire lock: [39701.405114] (&substream->self_group.lock){....}, at: [<c034d3c0>] snd_pcm_action_group+0x90/0x240 [39701.405131] [39701.405131] but task is already holding lock: [39701.405134] (&substream->self_group.lock){....}, at: [<c034d63f>] snd_pcm_action_lock_irq+0x3f/0xb0 [39701.405141] [39701.405142] other info that might help us debug this: [39701.405145] 3 locks held by jackd/17366: [39701.405147] #0: (snd_pcm_link_rwlock){....}, at: [<c034d627>] snd_pcm_action_lock_irq+0x27/0xb0 [39701.405155] #1: (&substream->group->lock){....}, at: [<c034d638>] snd_pcm_action_lock_irq+0x38/0xb0 [39701.405163] #2: (&substream->self_group.lock){....}, at: [<c034d63f>] snd_pcm_action_lock_irq+0x3f/0xb0 [39701.405171] [39701.405171] stack backtrace: [39701.405174] [<c0103b8a>] show_trace_log_lvl+0x1a/0x30 [39701.405179] [<c0104912>] show_trace+0x12/0x20 [39701.405183] [<c01049c6>] dump_stack+0x16/0x20 [39701.405187] [<c013b980>] __lock_acquire+0xbd0/0x1040 [39701.405193] [<c013be60>] lock_acquire+0x70/0x90 [39701.405197] [<c0407846>] _spin_lock+0x36/0x50 [39701.405203] [<c034d3c0>] snd_pcm_action_group+0x90/0x240 [39701.405207] [<c034d653>] snd_pcm_action_lock_irq+0x53/0xb0 [39701.405211] [<c035046f>] snd_pcm_common_ioctl1+0x35f/0xfb0 [39701.405215] [<c0351544>] snd_pcm_playback_ioctl1+0x34/0x420 [39701.405219] [<c03519f3>] snd_pcm_playback_ioctl+0x43/0x50 [39701.405223] [<c017ecc8>] do_ioctl+0x28/0x80 [39701.405229] [<c017ed77>] vfs_ioctl+0x57/0x290 [39701.405233] [<c017efe9>] sys_ioctl+0x39/0x60 [39701.405237] [<c0102bf4>] sysenter_past_esp+0x5d/0x99 [39701.405240] ======================= The attached lockdep annotation silences the warning. Signed-off-by:Frederik Deweerdt <frederik.deweerdt@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Fix SPDIF output (at least on Realtek codecs). The DIGI_CONVERT verbs have to be reset before the PCM stream is set up. Otherwise the digital setup is screwed up. Also, check the AMP capability before setting AMP of the digital out widget. Signed-off-by:
-
Takashi Iwai authored
- Clean up ali5451.c, following the standard coding style, unneeded codes reduced, and removal of redundant variable initializations. Hungarian notation isn't fixed yet ;) - Fix irq handler to return IRQ_NONE properly for shared irqs. Also check the hardware availability in irq handler to avoid possible initialization races at loading the driver. Signed-off-by:
-
Takashi Iwai authored
ak4114 code may trigger Oops when the parameters are changed without call of snd_ak4114_build(). Now it checks the existence of kctl element, and the workq is triggered after building the necessary kcontrols. Also, did some code clean up. Signed-off-by:
-
Karsten Wiese authored
some typo fixes. Signed-off-by:
Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by:
-
Takashi Iwai authored
ap192_4wire_start() in ice1712/revo.c returns unsigned char whereas it should return unsigned int. Signed-off-by:
-
Takashi Iwai authored
Minor optimization in trigger start callback. This fixes a nasty compile warning, too. Signed-off-by:
-
