- 06 Feb, 2019 40 commits
-
-
Florian Fainelli authored
Now that we have a dedicated NDO for getting a port's parent ID, get rid of SWITCHDEV_ATTR_ID_PORT_PARENT_ID and convert all callers to use the NDO exclusively. This is a preliminary change to getting rid of switchdev_ops eventually. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
DSA implements SWITCHDEV_ATTR_ID_PORT_PARENT_ID and we want to get rid of switchdev_ops eventually, ease that migration by implementing a ndo_get_port_parent_id() function which returns what switchdev_port_attr_get() would do. Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Florian Fainelli authored
ethsw implements SWITCHDEV_ATTR_ID_PORT_PARENT_ID and we want to get rid of switchdev_ops eventually, ease that migration by implementing a ndo_get_port_parent_id() function which returns what switchdev_port_attr_get() would do. Signed-off-by:
-
Florian Fainelli authored
netdevsim only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). Acked-by:
-
Florian Fainelli authored
mlxsw implements SWITCHDEV_ATTR_ID_PORT_PARENT_ID and we want to get rid of switchdev_ops eventually, ease that migration by implementing a ndo_get_port_parent_id() function which returns what switchdev_port_attr_get() would do. Acked-by:
-
Florian Fainelli authored
NFP only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). Since NFP uses switchdev_port_same_parent_id() convert it to use netdev_port_same_parent_id(). Acked-by:
-
Florian Fainelli authored
Ocelot only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID as a valid switchdev attribute getter, convert it to use ndo_get_port_parent_id() and get rid of the switchdev_ops::switchdev_port_attr_get altogether. Acked-by:
-
Florian Fainelli authored
mlxsw implements SWITCHDEV_ATTR_ID_PORT_PARENT_ID and we want to get rid of switchdev_ops eventually, ease that migration by implementing a ndo_get_port_parent_id() function which returns what switchdev_port_attr_get() would do. Acked-by:
-
Florian Fainelli authored
mlx5e only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). Since mlx5e makes use of switchdev_port_parent_id() convert it to use netdev_port_same_parent_id(). Acked-by:
-
Florian Fainelli authored
Liquidio only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). Acked-by:
-
Florian Fainelli authored
BNXT only supports SWITCHDEV_ATTR_ID_PORT_PARENT_ID, which makes it a great candidate to be converted to use the ndo_get_port_parent_id() NDO instead of implementing switchdev_port_attr_get(). The conversion is straight forward here since the PF and VF code use the same getter. Since bnxt makes uses of switchdev_port_same_parent_id() convert it to use netdev_port_same_parent_id(). Acked-by:
-
Florian Fainelli authored
In preparation for getting rid of switchdev_ops, create a dedicated NDO operation for getting the port's parent identifier. There are essentially two classes of drivers that need to implement getting the port's parent ID which are VF/PF drivers with a built-in switch, and pure switchdev drivers such as mlxsw, ocelot, dsa etc. We introduce a helper function: dev_get_port_parent_id() which supports recursion into the lower devices to obtain the first port's parent ID. Convert the bridge, core and ipv4 multicast routing code to check for such ndo_get_port_parent_id() and call the helper function when valid before falling back to switchdev_port_attr_get(). This will allow us to convert all relevant drivers in one go instead of having to implement both switchdev_port_attr_get() and ndo_get_port_parent_id() operations, then get rid of switchdev_port_attr_get(). Acked-by:
-
Vishal Kulkarni authored
Change t4fw_version.h to update latest firmware version number to 1.22.9.0. Signed-off-by:
Vishal Kulkarni <vishal@chelsio.com> Signed-off-by:
-
Vishal Kulkarni authored
Signed-off-by:
-
Thierry Reding authored
Read MAC address 32-bit at a time and manually extract the individual bytes. This avoids pointer aliasing and gives the compiler a better chance of optimizing the operation. Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
Thierry Reding authored
If the system was booted using a device tree and if the device tree contains a MAC address, use it instead of reading one from the EEPROM. This is useful in situations where the EEPROM isn't properly programmed or where the firmware wants to override the existing MAC address. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: core: Trace EMAD errors Nir says: This patchset adds a trace for EMAD errors to the existing EMAD payload traces. This tracepoint is useful to track user or firmware errors during tests execution. Patch #1 defines the devlink tracepoint. Patch #2 uses it for reporting mlxsw EMAD errors. ==================== Signed-off-by: -
Nir Dotan authored
Trace EMAD errors returned from HW. Signed-off-by:
Nir Dotan <nird@mellanox.com> Acked-by:
-
Nir Dotan authored
Define a tracepoint and allow user to trace messages in case of an hardware error code for hardware associated with devlink instance. Signed-off-by:
-
David S. Miller authored
Ioana Ciocoi Radulescu says: ==================== dpaa2-eth: Driver updates First patch moves the driver to a page-per-frame memory model. The others are minor tweaks and optimizations. ==================== Signed-off-by: -
Ioana Ciocoi Radulescu authored
Add more buffers to the Rx buffer pool as soon as 7 of them get consumed, instead of waiting for their number to drop below a fixed threshold. 7 is the number of buffers that can be released in the pool via a single DPIO command. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
-
Ioana Ciocoi Radulescu authored
Starting with MC10.14.0, dpaa2_io_service_enqueue_fq() API is functional. Since there are a number of cases where it offers better performance compared to the currently used enqueue function, switch to it for firmware versions that support it. Signed-off-by:
-
Ioana Ciocoi Radulescu authored
While in NAPI context, free skbs by calling napi_consume_skb() instead of dev_kfree_skb(), to take advantage of the bulk freeing mechanism. Signed-off-by:
-
Ioana Ciocoi Radulescu authored
Instead of allocating page fragments via the network stack, use the page allocator directly. For now, we consume one page for each Rx buffer. With the new memory model we are free to consider adding more XDP support. Performance decreases slightly in some IP forwarding cases. No visible effect on termination traffic. The driver memory footprint increases as a result of this change, but it is still small enough to not really matter. Another side effect is that now Rx buffer alignment requirements are naturally satisfied without any additional actions needed. Remove alignment related code, except in the buffer layout information conveyed to MC, as hardware still needs to know the alignment value we guarantee. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
David S. Miller authored
Pablo Neira Ayuso says: ==================== add flow_rule infrastructure This patchset, as is, allows us to reuse the driver codebase to configure ACL hardware offloads for the ethtool_rxnfc and the TC flower interfaces. A few clients for this infrastructure are presented, such as the bcm_sf2 and the qede drivers, for reference. Moreover all of the existing drivers in the tree are converted to use this infrastructure. This patchset is re-using the existing flow dissector infrastructure that was introduced by Jiri Pirko et al. so the amount of abstractions that this patchset adds are minimal. Well, just a few wrapper structures for the selector side of the rules. And, in order to express actions, this patchset exposes an action API that is based on the existing TC action infrastructure and what existing drivers already support on that front. v7: This patchset is a rebase on top of the net-next tree, after addressing questions and feedback from driver developers in the last batch. ==================== Signed-off-by: -
Pablo Neira Ayuso authored
The qede driver supports for ethtool_rx_flow_spec and flower, both codebases look very similar. This patch uses the ethtool_rx_flow_rule() infrastructure to remove the duplicated ethtool_rx_flow_spec parser and consolidate ACL offload support around the flow_rule infrastructure. Furthermore, more code can be consolidated by merging qede_add_cls_rule() and qede_add_tc_flower_fltr(), these two functions also look very similar. This driver currently provides simple ACL support, such as 5-tuple matching, drop policy and queue to CPU. Drivers that support more features can benefit from this infrastructure to save even more redundant codebase. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Pablo Neira Ayuso authored
This is a preparation patch to reuse the existing TC flower codebase from ethtool_rx_flow_spec. This patch is merely moving the core ethtool_rx_flow_spec parser after tc flower offload driver code so we can skip a few forward function declarations in the follow up patch. Signed-off-by:
-
Pablo Neira Ayuso authored
Update this driver to use the flow_rule infrastructure, hence we can use the same code to populate hardware IR from ethtool_rx_flow and the cls_flower interfaces. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch adds a function to translate the ethtool_rx_flow_spec structure to the flow_rule representation. This allows us to reuse code from the driver side given that both flower and ethtool_rx_flow interfaces use the same representation. This patch also includes support for the flow type flags FLOW_EXT, FLOW_MAC_EXT and FLOW_RSS. The ethtool_rx_flow_spec_input wrapper structure is used to convey the rss_context field, that is away from the ethtool_rx_flow_spec structure, and the ethtool_rx_flow_spec structure. Signed-off-by:
-
Pablo Neira Ayuso authored
These actions need to be added to support the ethtool_rx_flow interface. The queue action includes a field to specify the RSS context, that is set via FLOW_RSS flow type flag and the rss_context field in struct ethtool_rxnfc, plus the corresponding queue index. FLOW_RSS implies that rss_context is non-zero, therefore, queue.ctx == 0 means that FLOW_RSS was not set. Also add a field to store the vf index which is stored in the ethtool_rxnfc ring_cookie field. Signed-off-by:
-
Pablo Neira Ayuso authored
Now that drivers have been converted to use the flow action infrastructure, remove this field from the tc_cls_flower_offload structure. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch updates drivers to use the new flow action infrastructure. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch provides the flow_stats structure that acts as container for tc_cls_flower_offload, then we can use to restore the statistics on the existing TC actions. Hence, tcf_exts_stats_update() is not used from drivers anymore. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch implements a new function to translate from native TC action to the new flow_action representation. Moreover, this patch also updates cls_flower to use this new function. Signed-off-by:
-
Pablo Neira Ayuso authored
This new infrastructure defines the nic actions that you can perform from existing network drivers. This infrastructure allows us to avoid a direct dependency with the native software TC action representation. Signed-off-by:
-
Pablo Neira Ayuso authored
This patch adds pedit_headers_action structure to store the result of parsing tc pedit actions. Then, it calls alloc_tc_pedit_action() to populate the mlx5e hardware intermediate representation once all actions have been parsed. This patch comes in preparation for the new flow_action infrastructure, where each packet mangling comes in an separated action, ie. not packed as in tc pedit. Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Pablo Neira Ayuso authored
This patch wraps the dissector key and mask - that flower uses to represent the matching side - around the flow_match structure. To avoid a follow up patch that would edit the same LoCs in the drivers, this patch also wraps this new flow match structure around the flow rule object. This new structure will also contain the flow actions in follow up patches. This introduces two new interfaces: bool flow_rule_match_key(rule, dissector_id) that returns true if a given matching key is set on, and: flow_rule_match_XYZ(rule, &match); To fetch the matching side XYZ into the match container structure, to retrieve the key and the mask with one single call. Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== net: phy: add and use further MMD accessors Add MMD accessors for modifying MMD registers and clearing / setting bits in MMD registers. Use these accessors in PHY drivers and phylib. v2: - fix SoB in patch 2 ==================== Signed-off-by: -
Heiner Kallweit authored
Make use of the new MMD accessors. v2: - fix SoB Signed-off-by:
-
Nikita Yushchenko authored
This adds full set of locked and unlocked accessor functions to read and write PHY MMD registers and/or bitfields. Set of functions exactly matches what is already available for PHY legacy registers. Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by:
-
