- 27 Jul, 2011 40 commits
-
-
Mauro Carvalho Chehab authored
Don't read paste the buffer, if the firmware is corrupted. Instead, print an error message. Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
Instead of using #ifdef I2C_LONG_ADR for some devices, convert it into a parameter. Terratec H5 logs from the original driver seems to need this mode. Signed-off-by: -
Mauro Carvalho Chehab authored
Currently, the only parameter to be configured is the I2C address. However, Terratec H5 logs shows that it needs a different setting for some things, and it has its own firmware. So, move the addr into a config structure, in order to allow adding the required configuration bits. Signed-off-by: -
Mauro Carvalho Chehab authored
The normal 16-bits read routine is called as "Read16_0". This is due to a flags that could optionally be passed. Yet, on no places at the code, a flag is passed there. The same happens with 16-bits write and 32-read/write routines, and with WriteBlock. Also, using flags, is an exception: there's no place currently using flags, except for an #ifdef at WriteBlock. Rename the function as just "read16", and the one that requires flags, as "read16_flags". This helps to see where the flags are used, and also avoid using CamelCase on Kernel. Signed-off-by: -
Mauro Carvalho Chehab authored
This is a complex driver. Adding support for other devices with drxk requires to be able to debug it and see where it is failing. So, add optional printk messages to allow debugging it. Signed-off-by: -
Mauro Carvalho Chehab authored
It is hard to identify the origin for those errors without a prefix to indicate which driver produced them: [ 1390.220984] i2c_write error [ 1390.224133] I2C Write error [ 1391.284202] i2c_read error [ 1392.288685] i2c_read error Signed-off-by: -
Mauro Carvalho Chehab authored
It is hard to identify the origin for those errors without a prefix to indicate which driver produced them: [ 1390.220984] i2c_write error [ 1390.224133] I2C Write error [ 1391.284202] i2c_read error [ 1392.288685] i2c_read error Signed-off-by: -
Mauro Carvalho Chehab authored
WARNING: Use #include <linux/io.h> instead of <asm/io.h> +#include <asm/io.h> Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/dvb/ddbridge/built-in.o: In function `my_dvb_dmx_ts_card_init': /home/v4l/v4l/patchwork/drivers/media/dvb/ddbridge/ddbridge-core.c:718: multiple definition of `my_dvb_dmx_ts_card_init' drivers/media/dvb/ngene/built-in.o:/home/v4l/v4l/patchwork/drivers/media/dvb/ngene/ngene-dvb.c:227: first defined here drivers/media/dvb/ddbridge/built-in.o: In function `my_dvb_dmxdev_ts_card_init': /home/v4l/v4l/patchwork/drivers/media/dvb/ddbridge/ddbridge-core.c:737: multiple definition of `my_dvb_dmxdev_ts_card_init' drivers/media/dvb/ngene/built-in.o:/home/v4l/v4l/patchwork/drivers/media/dvb/ngene/ngene-dvb.c:246: first defined here Signed-off-by: -
Oliver Endriss authored
Update Kconfig description (ddbridge with cxd2099) Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
Fix compilation of ngene/ddbridge for DVB_CXD2099=n. Note: Bug was introduced by commit 'cxd2099: Update to latest version'. Signed-off-by:
-
Oliver Endriss authored
Driver added to Makefile and Kconfig. Signed-off-by:
-
Oliver Endriss authored
Codingstyle fixes Signed-off-by:
-
Ralph Metzler authored
Driver support for Digital Devices ddbridge-based cards: Octopus, Octopus mini, Octopus LE, cineS2(v6) with DuoFlex S2 and/or DuoFlex CT tuners. Driver was taken from ddbridge-0.6.1.tar.bz2. Signed-off-by:
Ralph Metzler <rmetzler@digitaldevices.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
The CHK_ERROR macro does a flow control, violating chapter 12 of the Documentation/CodingStyle. Doing flow controls inside macros is a bad idea, as it hides what's happening. It also hides the var "status" with is also a bad idea. The changes were done by this small perl script: my $blk=0; while (<>) { s/^\s+// if ($blk); $f =~ s/\s+$// if ($blk && /^\(/); $blk = 1 if (!m/\#/ && m/CHK_ERROR/); $blk=0 if ($blk && m/\;/); s/\n/ / if ($blk); $f.=$_; }; $f=~ s,\n(\t+)CHK_ERROR\((.*)\)\;([^\n]*),\n\1status = \2;\3\n\1if (status < 0)\n\1\tbreak;,g; print $f; And manually fixed. Signed-off-by: -
Mauro Carvalho Chehab authored
One of the problems of the old CHECK_ERROR is that it was hiding the status parameter. Maybe due to that, on a few places, the return code might lead to return incorrect status: drivers/media/dvb/frontends/drxk_hard.c: In function ‘load_microcode.clone.0’: drivers/media/dvb/frontends/drxk_hard.c:1281: warning: ‘status’ may be used uninitialized in this function drivers/media/dvb/frontends/drxk_hard.c:1281: note: ‘status’ was declared here drivers/media/dvb/frontends/drxk_hard.c: In function ‘GetLockStatus’: drivers/media/dvb/frontends/drxk_hard.c:1792: warning: ‘status’ may be used uninitialized in this function drivers/media/dvb/frontends/drxk_hard.c: In function ‘Start.clone.7’: drivers/media/dvb/frontends/drxk_hard.c:1734: warning: ‘status’ may be used uninitialized in this function Signed-off-by: -
Mauro Carvalho Chehab authored
drivers/media/dvb/frontends/drxk_hard.c: In function ‘SetDVBT’: drivers/media/dvb/frontends/drxk_hard.c:3766: warning: enumeration value ‘BANDWIDTH_5_MHZ’ not handled in switch drivers/media/dvb/frontends/drxk_hard.c:3766: warning: enumeration value ‘BANDWIDTH_10_MHZ’ not handled in switch drivers/media/dvb/frontends/drxk_hard.c:3766: warning: enumeration value ‘BANDWIDTH_1_712_MHZ’ not handled in switch Signed-off-by: -
Mauro Carvalho Chehab authored
The CHK_ERROR macro does a flow control, violating chapter 12 of the Documentation/CodingStyle. Doing flow controls inside macros is a bad idea, as it hides what's happening. It also hides the var "status" with is also a bad idea. The changes were done by this small perl script: my $blk=0; while (<>) { s/^\s+// if ($blk); $f =~ s/\s+$// if ($blk && /^\(/); $blk = 1 if (!m/\#/ && m/CHK_ERROR/); $blk=0 if ($blk && m/\;/); s/\n/ / if ($blk); $f.=$_; }; $f=~ s,\n(\t+)CHK_ERROR\((.*)\)\;([^\n]*),\n\1status = \2;\3\n\1if (status < 0)\n\1\tbreak;,g; print $f; And manually fixed. Signed-off-by: -
Mauro Carvalho Chehab authored
The CHK_ERROR macro does a flow control, violating chapter 12 of the Documentation/CodingStyle. Doing flow controls inside macros is a bad idea, as it hides what's happening. It also hides the var "status" with is also a bad idea. The changes were done by this small perl script: my $blk=0; while (<>) { s /^\s+// if ($blk); $f =~ s/\s+$// if ($blk && /^\(/); $blk = 1 if (!m/\#/ && m/CHK_ERROR/); $blk=0 if ($blk && m/\;/); s/\n/ / if ($blk); $f.=$_; }; $f=~ s,\n(\t+)CHK_ERROR\((.*)\)\;([^\n]*),\n\1status = \2;\3\n\1if (status < 0)\n\1\tbreak;,g; print $f; And manually fixed. Signed-off-by: -
Mauro Carvalho Chehab authored
/home/v4l/v4l/patchwork/drivers/media/dvb/frontends/drxk_hard.c:181: multiple definition of `MulDiv32' drivers/media/dvb/frontends/drxd.o:/home/v4l/v4l/patchwork/drivers/media/dvb/frontends/drxd_hard.c:236: first defined here Signed-off-by: -
Oliver Endriss authored
As the CI requires a continuous data stream, the driver inserts dummy packets when necessary. Do not pass these packets to userspace anymore. Signed-off-by:
-
Oliver Endriss authored
Modifications for latest cxd2099. Signed-off-by:
-
Oliver Endriss authored
Codingstyle fixes. Signed-off-by:
-
Ralph Metzler authored
Import latest driver from ddbridge-0.6.1.tar.bz2. Signed-off-by:
-
Oliver Endriss authored
Support DuoFlex CT with Digital Devices CineS2 and Mystique SaTiX-S2. Signed-off-by:
-
Oliver Endriss authored
Fix name of Digital Devices PCIe/miniPCIe. Signed-off-by:
-
Oliver Endriss authored
Fix return code if no demux was found (cineS2_probe). Signed-off-by:
-
Oliver Endriss authored
Codingstyle fixes Signed-off-by:
-
Ralph Metzler authored
Support Digital Devices DuoFlex CT with ngene. Signed-off-by:
-
Oliver Endriss authored
Get DRX-K firmware for Digital Devices DVB-CT cards Signed-off-by:
-
Oliver Endriss authored
Add both drivers to Makefile and Kconfig. Signed-off-by:
-
Oliver Endriss authored
Tons of coding-style fixes Signed-off-by:
-
Oliver Endriss authored
Deleted all unused symbold from drxk_map.h, which reduced the size from 1.1M to 37K! Signed-off-by:
-
Ralph Metzler authored
Driver for the DRX-K DVB-C/T demodulator. Signed-off-by:
Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
-
Oliver Endriss authored
Signed-off-by:
-
Ralph Metzler authored
Driver for the NXP TDA18271c2 silicon tuner. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Kamil Debski authored
Add support for the codec controls to the v4l2 control framework. [mchehab@redhat.com: Fix merge conflicts and removed some hunks that were adding blank lines without a good reason] Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Kamil Debski authored
Add control definitions and documentation for controls specific to codec devices. Signed-off-by:
-
Kamil Debski authored
Add fourcc definitions and documentation for the following compressed formats: H264, H264 without start codes, MPEG1/2/4 ES, XVID, VC1 Annex G and Annex L compliant. Signed-off-by:
-
