- 20 Aug, 2021 4 commits
-
-
Chris Mi authored
Currently it is in eswitch attribute. Move it to flow attribute to reflect the change in previous patch. Signed-off-by:
Chris Mi <cmi@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Chris Mi authored
Module sample belongs to en/tc instead of esw. Move it and rename accordingly. Signed-off-by:
-
Saeed Mahameed authored
mlx5/esw/sample.c doesn't really need mlx5e_priv object, we can remove this redundant dependency by passing the eswitch object directly to the sample object constructor. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
drivers/ptp/Kconfig: 55c8fca1 ("ptp_pch: Restore dependency on PCI") e5f31552 ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 19 Aug, 2021 36 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from bpf, wireless and mac80211 trees. Current release - regressions: - tipc: call tipc_wait_for_connect only when dlen is not 0 - mac80211: fix locking in ieee80211_restart_work() Current release - new code bugs: - bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() - ethernet: ice: fix perout start time rounding - wwan: iosm: prevent underflow in ipc_chnl_cfg_get() Previous releases - regressions: - bpf: clear zext_dst of dead insns - sch_cake: fix srchost/dsthost hashing mode - vrf: reset skb conntrack connection on VRF rcv - net/rds: dma_map_sg is entitled to merge entries Previous releases - always broken: - ethernet: bnxt: fix Tx path locking and races, add Rx path barriers" * tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits) net: dpaa2-switch: disable the control interface on error path Revert "flow_offload: action should not be NULL when it is referenced" iavf: Fix ping is lost after untrusted VF had tried to change MAC i40e: Fix ATR queue selection r8152: fix the maximum number of PLA bp for RTL8153C r8152: fix writing USB_BP2_EN mptcp: full fully established support after ADD_ADDR mptcp: fix memory leak on address flush net/rds: dma_map_sg is entitled to merge entries net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port net: asix: fix uninit value bugs ovs: clear skb->tstamp in forwarding path net: mdio-mux: Handle -EPROBE_DEFER correctly net: mdio-mux: Don't ignore memory allocation errors net: mdio-mux: Delete unnecessary devm_kfree net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse sch_cake: fix srchost/dsthost hashing mode ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32 mac80211: fix locking in ieee80211_restart_work() ... -
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Enable SW_TABLET_MODE support for the TP200s - Enable WMI on two more Gigabyte motherboards * tag 'platform-drivers-x86-v5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: gigabyte-wmi: add support for B450M S2H V2 platform/x86: gigabyte-wmi: add support for X570 GAMING X platform/x86: asus-nb-wmi: Add tablet_mode_sw=lid-flip quirk for the TP200s platform/x86: asus-nb-wmi: Allow configuring SW_TABLET_MODE method with a module option
-
Colin Ian King authored
A recent change added error checking messages and failed to remove one of the previous error checks. There are now two checks on variable err so the second one is redundant dead code and can be removed. Addresses-Coverity: ("Logically dead code") Fixes: a83bdada ("octeontx2-af: Add debug messages for failures") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210818130927.33895-1-colin.king@canonical.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-next-for-5.15-20210819' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== linux-can-next-for-5.15-20210819 The first patch is by me, for the mailmap file and maps the email address of two former ESD employees to a newly created role account. The next 3 patches are by Oleksij Rempel and add support for GPIO based switchable CAN bus termination. The next 3 patches are by Vincent Mailhol. The first one changes the CAN netlink interface to not bail out if the user switched off unsupported features. The next one adds Vincent as the maintainer of the etas_es58x driver and the last one cleans up the documentation of struct es58x_fd_tx_conf_msg. The next patch is by me, for the mcp251xfd driver and marks some instances of struct mcp251xfd_priv as const. Lad Prabhakar contributes 2 patches for the rcar_canfd driver, that add support for RZ/G2L family. The next 5 patches target the m_can/tcan45x5 driver. 2 are by me an fix trivial checkpatch warnings. The remaining 3 patches are by Matt Kline and improve the performance on the SPI based tcan4x5x chip by batching FIFO reads and writes. The last 7 patches are for the c_can driver. Dario Binacchi's patch converts the DT bindings to yaml, 2 patches by me fix a typo and rename a macro to properly represent the usage. The last 4 patches are again by Dario Binacchi and provide a performance improvement for the TX path by operating the TX mailboxes as a true FIFO. * tag 'linux-can-next-for-5.15-20210819' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits) can: c_can: cache frames to operate as a true FIFO can: c_can: support tx ring algorithm can: c_can: exit c_can_do_tx() early if no frames have been sent can: c_can: remove struct c_can_priv::priv field can: c_can: rename IF_RX -> IF_NAPI can: c_can: c_can_do_tx(): fix typo in comment dt-bindings: net: can: c_can: convert to json-schema can: m_can: Batch FIFO writes during CAN transmit can: m_can: Batch FIFO reads during CAN receive can: m_can: Disable IRQs on FIFO bus errors can: m_can: fix block comment style can: tcan4x5x: cdev_to_priv(): remove stray empty line can: rcar_canfd: Add support for RZ/G2L family dt-bindings: net: can: renesas,rcar-canfd: Document RZ/G2L SoC can: mcp251xfd: mark some instances of struct mcp251xfd_priv as const can: etas_es58x: clean-up documentation of struct es58x_fd_tx_conf_msg MAINTAINERS: add Vincent MAILHOL as maintainer for the ETAS ES58X CAN/USB driver can: netlink: allow user to turn off unsupported features can: dev: provide optional GPIO based termination support dt-bindings: can: fsl,flexcan: enable termination-* bindings ... ==================== Link: https://lore.kernel.org/r/20210819133913.657715-1-mkl@pengutronix.deSigned-off-by:
-
Vladimir Oltean authored
Currently dpaa2_switch_takedown has a funny name and does not do the opposite of dpaa2_switch_init, which makes probing fail when we need to handle an -EPROBE_DEFER. A sketch of what dpaa2_switch_init does: dpsw_open dpaa2_switch_detect_features dpsw_reset for (i = 0; i < ethsw->sw_attr.num_ifs; i++) { dpsw_if_disable dpsw_if_set_stp dpsw_vlan_remove_if_untagged dpsw_if_set_tci dpsw_vlan_remove_if } dpsw_vlan_remove alloc_ordered_workqueue dpsw_fdb_remove dpaa2_switch_ctrl_if_setup When dpaa2_switch_takedown is called from the error path of dpaa2_switch_probe(), the control interface, enabled by dpaa2_switch_ctrl_if_setup from dpaa2_switch_init, remains enabled, because dpaa2_switch_takedown does not call dpaa2_switch_ctrl_if_teardown. Since dpaa2_switch_probe might fail due to EPROBE_DEFER of a PHY, this means that a second probe of the driver will happen with the control interface directly enabled. This will trigger a second error: [ 93.273528] fsl_dpaa2_switch dpsw.0: dpsw_ctrl_if_set_pools() failed [ 93.281966] fsl_dpaa2_switch dpsw.0: fsl_mc_driver_probe failed: -13 [ 93.288323] fsl_dpaa2_switch: probe of dpsw.0 failed with error -13 Which if we investigate the /dev/dpaa2_mc_console log, we find out is caused by: [E, ctrl_if_set_pools:2211, DPMNG] ctrl_if must be disabled So make dpaa2_switch_takedown do the opposite of dpaa2_switch_init (in reasonable limits, no reason to change STP state, re-add VLANs etc), and rename it to something more conventional, like dpaa2_switch_teardown. Fixes: 613c0a58 ("staging: dpaa2-switch: enable the control interface") Signed-off-by:Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20210819141755.1931423-1-vladimir.oltean@nxp.comSigned-off-by:
-
Ido Schimmel authored
This reverts commit 9ea3e52c. Cited commit added a check to make sure 'action' is not NULL, but 'action' is already dereferenced before the check, when calling flow_offload_has_one_action(). Therefore, the check does not make any sense and results in a smatch warning: include/net/flow_offload.h:322 flow_action_mixed_hw_stats_check() warn: variable dereferenced before check 'action' (see line 319) Fix by reverting this commit. Cc: gushengxian <gushengxian@yulong.com> Fixes: 9ea3e52c ("flow_offload: action should not be NULL when it is referenced") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20210819105842.1315705-1-idosch@idosch.orgSigned-off-by:
-
Jakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-08-18 This series contains updates to i40e and iavf drivers. Arkadiusz fixes Flow Director not using the correct queue due to calling the wrong pick Tx function for i40e. Sylwester resolves traffic loss for iavf when it attempts to change its MAC address when it does not have permissions to do so. ==================== Link: https://lore.kernel.org/r/20210818174217.4138922-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Sylwester Dziedziuch authored
Make changes to MAC address dependent on the response of PF. Disallow changes to HW MAC address and MAC filter from untrusted VF, thanks to that ping is not lost if VF tries to change MAC. Add a new field in iavf_mac_filter, to indicate whether there was response from PF for given filter. Based on this field pass or discard the filter. If untrusted VF tried to change it's address, it's not changed. Still filter was changed, because of that ping couldn't go through. Fixes: c5c922b3 ("iavf: fix MAC address setting for VFs when filter is rejected") Signed-off-by:
Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by:
Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by:
Gurucharan G <Gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
-
Arkadiusz Kubalewski authored
Without this patch, ATR does not work. Receive/transmit uses queue selection based on SW DCB hashing method. If traffic classes are not configured for PF, then use netdev_pick_tx function for selecting queue for packet transmission. Instead of calling i40e_swdcb_skb_tx_hash, call netdev_pick_tx, which ensures that packet is transmitted/received from CPU that is running the application. Reproduction steps: 1. Load i40e driver 2. Map each MSI interrupt of i40e port for each CPU 3. Disable ntuple, enable ATR i.e.: ethtool -K $interface ntuple off ethtool --set-priv-flags $interface flow-director-atr 4. Run application that is generating traffic and is bound to a single CPU, i.e.: taskset -c 9 netperf -H 1.1.1.1 -t TCP_RR -l 10 5. Observe behavior: Application's traffic should be restricted to the CPU provided in taskset. Fixes: 89ec1f08 ("i40e: Fix queue-to-TC mapping on Tx") Signed-off-by:
Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by:
Dave Switzer <david.switzer@intel.com> Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-08-19 We've added 3 non-merge commits during the last 3 day(s) which contain a total of 3 files changed, 29 insertions(+), 6 deletions(-). The main changes are: 1) Fix to clear zext_dst for dead instructions which was causing invalid program rejections on JITs with bpf_jit_needs_zext such as s390x, from Ilya Leoshkevich. 2) Fix RCU splat in bpf_get_current_{ancestor_,}cgroup_id() helpers when they are invoked from sleepable programs, from Yonghong Song. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests, bpf: Test that dead ldx_w insns are accepted bpf: Clear zext_dst of dead insns bpf: Add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() helpers ==================== Link: https://lore.kernel.org/r/20210819144904.20069-1-daniel@iogearbox.netSigned-off-by: -
Dario Binacchi authored
As reported by a comment in the c_can_start_xmit() this was not a FIFO. C/D_CAN controller sends out the buffers prioritized so that the lowest buffer number wins. What did c_can_start_xmit() do if head was less tail in the tx ring ? It waited until all the frames queued in the FIFO was actually transmitted by the controller before accepting a new CAN frame to transmit, even if the FIFO was not full, to ensure that the messages were transmitted in the order in which they were loaded. By storing the frames in the FIFO without requiring its transmission, we will be able to use the full size of the FIFO even in cases such as the one described above. The transmission interrupt will trigger their transmission only when all the messages previously loaded but stored in less priority positions of the buffers have been transmitted. Link: https://lore.kernel.org/r/20210807130800.5246-5-dariobin@libero.itSuggested-by:
Gianluca Falavigna <gianluca.falavigna@inwind.it> Signed-off-by:
Dario Binacchi <dariobin@libero.it> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Dario Binacchi authored
The algorithm is already used successfully by other CAN drivers (e.g. mcp251xfd). Its implementation was kindly suggested to me by Marc Kleine-Budde following a patch I had previously submitted. You can find every detail at https://lore.kernel.org/patchwork/patch/1422929/. The idea is that after this patch, it will be easier to patch the driver to use the message object memory as a true FIFO. Link: https://lore.kernel.org/r/20210807130800.5246-4-dariobin@libero.itSuggested-by:
-
Dario Binacchi authored
The c_can_poll() handles RX/TX events unconditionally. It may therefore happen that c_can_do_tx() is called unnecessarily because the interrupt was triggered by the reception of a frame. In these cases, we avoid to execute unnecessary statements and exit immediately. Link: https://lore.kernel.org/r/20210807130800.5246-3-dariobin@libero.itSigned-off-by:
-
Dario Binacchi authored
It references the clock but it is never used. So let's remove it. Link: https://lore.kernel.org/r/20210807130800.5246-2-dariobin@libero.itSigned-off-by:
-
Marc Kleine-Budde authored
The C_CAN/D_CAN cores implement 2 interfaces to manage the message objects. To avoid concurrency and the need for locking one interface is used in the TX path (IF_TX). While the other one, named IF_RX is used from NAPI context only. As this interface is not only used to manage RX, but also TX message objects, this patch renames IF_RX to IF_NAPI. Link: https://lore.kernel.org/r/20210809080608.171545-1-mkl@pengutronix.de Cc: Dario Binacchi <dariobin@libero.it> Signed-off-by:
-
Marc Kleine-Budde authored
This patch fixes a typo in the comment in c_can_do_tx(). Fixes: eddf6711 ("can: c_can: add a comment about IF_RX interface's use") Link: https://lore.kernel.org/r/20210806105127.103302-1-mkl@pengutronix.de Cc: Dario Binacchi <dariobin@libero.it> Signed-off-by:
-
Dario Binacchi authored
Convert the Bosch C_CAN/D_CAN controller device tree binding documentation to json-schema. Document missing properties. Remove "ti,hwmods" as it is no longer used in TI dts. Make "clocks" required as it is used in all dts. Update the examples. Link: https://lore.kernel.org/r/20210805192750.9051-1-dariobin@libero.itSigned-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Matt Kline authored
Give FIFO writes the same treatment as reads to avoid fixed costs of individual transfers on a slow bus (e.g., tcan4x5x). Link: https://lore.kernel.org/r/20210817050853.14875-4-matt@bitbashing.ioSigned-off-by:
Matt Kline <matt@bitbashing.io> Signed-off-by:
-
Matt Kline authored
On peripherals communicating over a relatively slow SPI line (e.g. tcan4x5x), individual transfers have high fixed costs. This causes the driver to spend most of its time waiting between transfers and severely limits throughput. Reduce these overheads by reading more than one word at a time. Writing could get a similar treatment in follow-on commits. Link: https://lore.kernel.org/r/20210817050853.14875-3-matt@bitbashing.ioSigned-off-by:
-
Matt Kline authored
If FIFO reads or writes fail due to the underlying regmap (e.g., SPI) I/O, propagate that up to the m_can driver, log an error, and disable interrupts, similar to the mcp251xfd driver. While reworking the FIFO functions to add this error handling, add support for bulk reads and writes of multiple registers. Link: https://lore.kernel.org/r/20210817050853.14875-2-matt@bitbashing.ioSigned-off-by:
-
Marc Kleine-Budde authored
This patch fixes the commenting style in the m_can driver. Fixes: 1be37d3b ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") Fixes: df06fd67 ("can: m_can: m_can_chip_config(): enable and configure internal timestamps") Link: https://lore.kernel.org/r/20210819111703.599686-2-mkl@pengutronix.de Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Signed-off-by:
-
Marc Kleine-Budde authored
This patch removes a stray empty line in the cdev_to_priv() function. Fixes: ac33ffd3 ("can: m_can: let m_can_class_allocate_dev() allocate driver specific private data") Link: https://lore.kernel.org/r/20210819111703.599686-1-mkl@pengutronix.deSigned-off-by:
-
Lad Prabhakar authored
CANFD block on RZ/G2L SoC is almost identical to one found on R-Car Gen3 SoC's. On RZ/G2L SoC interrupt sources for each channel are split into different sources and the IP doesn't divide (1/2) CANFD clock within the IP. This patch adds compatible string for RZ/G2L family and splits the irq handlers to accommodate both RZ/G2L and R-Car Gen3 SoC's. Link: https://lore.kernel.org/r/20210727133022.634-3-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Biju Das <biju.das.jz@bp.renesas.com> [mkl: fixed typo: recieve -> receive, thanks Geert] Signed-off-by:
-
Lad Prabhakar authored
Add CANFD binding documentation for Renesas RZ/G2L SoC. Link: https://lore.kernel.org/r/20210727133022.634-2-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
-
Marc Kleine-Budde authored
With the patch 07ff4aed ("time/timecounter: Mark 1st argument of timecounter_cyc2time() as const") some instances of the struct mcp251xfd_priv can be marked as const. This patch marks these as const. Link: https://lore.kernel.org/r/20210813091027.159379-1-mkl@pengutronix.de Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by:
-
Vincent Mailhol authored
The documentation of struct es58x_fd_tx_conf_msg explains in details the different TDC parameters. However, those description are redundant with the documentation of struct can_tdc. Remove most of the description. Also, fixes a typo in the reference to the datasheet (E701 -> E70). Link: https://lore.kernel.org/r/20210815033248.98111-8-mailhol.vincent@wanadoo.frSigned-off-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by:
-
Vincent Mailhol authored
Adding myself (Vincent Mailhol) as a maintainer for the ETAS ES58X CAN/USB driver. Link: https://lore.kernel.org/r/20210814093353.74391-1-mailhol.vincent@wanadoo.frSigned-off-by:
-
Vincent Mailhol authored
The sanity checks on the control modes will reject any request related to an unsupported features, even turning it off. Example on an interface which does not support CAN-FD: $ ip link set can0 type can bitrate 500000 fd off RTNETLINK answers: Operation not supported This patch lets such command go through (but requests to turn on an unsupported feature are, of course, still denied). Link: https://lore.kernel.org/r/20210815033248.98111-2-mailhol.vincent@wanadoo.frSigned-off-by:
-
Oleksij Rempel authored
For CAN buses to work, a termination resistor has to be present at both ends of the bus. This resistor is usually 120 Ohms, other values may be required for special bus topologies. This patch adds support for a generic GPIO based CAN termination. The resistor value has to be specified via device tree, and it can only be attached to or detached from the bus. By default the termination is not active. Link: https://lore.kernel.org/r/20210818071232.20585-4-o.rempel@pengutronix.deSigned-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by:
-
Oleksij Rempel authored
Enable termination-* binding and provide validation example for it. Link: https://lore.kernel.org/r/20210818071232.20585-3-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
Some boards provide GPIO controllable termination resistor. Provide binding to make use of it. Link: https://lore.kernel.org/r/20210818071232.20585-2-o.rempel@pengutronix.deSigned-off-by:
-
Colin Ian King authored
Don't populate the array stpa on the stack but instead it static const. Makes the object code smaller by 81 bytes: Before: text data bss dec hex filename 54993 17248 0 72241 11a31 ./drivers/net/ethernet/ti/cpsw_new.o After: text data bss dec hex filename 54784 17376 0 72160 119e0 ./drivers/net/ethernet/ti/cpsw_new.o (gcc version 10.3.0) Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Don't populate the array spec_opcode on the stack but instead it static const. Makes the object code smaller by 158 bytes: Before: text data bss dec hex filename 12271 3976 128 16375 3ff7 .../hisilicon/hns3/hns3pf/hclge_cmd.o After: text data bss dec hex filename 12017 4072 128 16217 3f59 .../hisilicon/hns3/hns3pf/hclge_cmd.o (gcc version 10.3.0) Signed-off-by:
-
Colin Ian King authored
Don't populate the array speeds on the stack but instead it static const. Makes the object code smaller by 17 bytes: Before: text data bss dec hex filename 39987 14200 64 54251 d3eb .../huawei/hinic/hinic_sriov.o After: text data bss dec hex filename 39906 14264 64 54234 d3da .../huawei/hinic/hinic_sriov.o (gcc version 10.3.0) Signed-off-by:
-
David S. Miller authored
Eli Cohen says: ==================== Indirect dev ingress qdisc creation order The first patch is just a cleanup of the code. The second patch is fixing the dependency in ingress qdisc creation relative to offloading driver registration to filter configurations. v1 -> v2: Fix warning - variable set but not used ==================== Signed-off-by: -
Eli Cohen authored
Currently, when creating an ingress qdisc on an indirect device before the driver registered for callbacks, the driver will not have a chance to register its filter configuration callbacks. To fix that, modify the code such that it keeps track of all the ingress qdiscs that call flow_indr_dev_setup_offload(). When a driver calls flow_indr_dev_register(), go through the list of tracked ingress qdiscs and call the driver callback entry point so as to give it a chance to register its callback. Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Eli Cohen <elic@nvidia.com> Signed-off-by:
-
