Use the DIV_ROUND_UP macro to clarify the (((n) + (d) - 1) / (d)) calculations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The labpc_free_dma_chan() function validates the private data. Remove the
unnecessary validation in labpc_datach().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver includes a number of unnecessary headers. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ni_labpc_common module is used by the ni_labpc, ni_labpc_pci, and ni_labpc_cs
drivers to provide the common code support. Those drivers currently all call
comedi_alloc_devpriv() to allocate the private data before calling the common
attach function.

For aesthetics, move the private data allocation into the common code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This function is only called by pci1710_handle_fifo(). Absorb it and clean up
pci1710_handle_fifo().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The two step process to transfer the ai samples in pci1710_handle_fifo() doesn't
make any sense. If the async buffer does not have enough room for the samples the
core will set the async event COMEDI_CB_OVERFLOW which will cause the async command
to cancel. Splitting the transfer doesn't add any value.

Transfer all the samples in one step to simplify the code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This parameter is not used in the function. It was only used in some debug
messages that were previously removed. Remove the parameter.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The pci1710_handle_every_sample() and pci1710_handle_fifo() helpers, called by
the interrupt handler, both have multiple comedi_handle_events() calls. Remove
these and just do a single comedi_handle_events() at the end of the interrupt
handler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce a helper function to read an analog input sample, check for
channel dropout, and mask the sample to the maxdata of the subdevice.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename this function so it has namespace associated with the driver.

Tidy up the code to clarify the function. Remove the unnecessary static const
array muxonechan[].
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver saves the channel list of a scan in the private data and uses
that list to check analog input samples for data dropout.

Currently the channel numbers are shifted 12 bits so that they match the
channel number in the samples that are read from the board. All of the
shifts make the driver a bit harder to follow.

Store the channel numbers directly to the 'act_chanlist' and shift the
sample value instead when checking for the dropout. Add a comment for
clarity.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'cardtype' in the boardinfo is only used to:

 1) determine if the board is a pci1720 during the attach of the driver
    and when reseting the board
 2) determine is the board is not a pci1713 when checking for analog input
    data dropout

There is also an unnecessary use of the 'cardtype' when canceling an analog
input async command.

Remove the 'cardtype' member and add two bit-field flags, 'is_pci1713' and
'is_pci1720'. Refactor the driver to use the new flags.

Remove the unnecessary cardtype handling in pci171x_ai_cancel().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This boardinfo is not necessary. All the boards with analog outputs have
the same range options except for the pci1720 board. That board type is
already handled specially during the driver attach.

Remove the boardinfo and add the subdevice range_table initialization in
the cardtype switch.

Rename the range tables to clarify that they are "analog output" ranges.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the MODULE_DESCRIPTION to something more useful than the generic
"Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the remaining, unnecessary, function separation comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename all the 'this_board' local variables to simply
'board'. That's more common in comed drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the analog input subdevice init and
rename the (*insn_read) support function. Also remove the unnecessary comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the analog output subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the digital input and output subdevice
init and rename the support functions. Also remove the unnecessary comment.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the counter subdevice init and
rename the support functions. Also remove the unnecessary comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename this function and tidy it up.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename this function and tidy it up.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use the new comedi_subdevice 'readback' member and the core provided
(*insn_read) for the readback of the analog output subdevice channels.

The board is "reset" prior to the subdevice init. Part of this reset
sets all the analog output channels to 0V. Move the initialization of
the 'readback' values after the 'readback' member has been allocated.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some of the boards supported by this driver have analog outputs. The pci1720
board has 4 analog output channels and the others have 2.

For aesthetics, change the 'n_aochan' member to a bit-field flag 'has_ao' and
refactor the board attach accordingly. Remove the unnecessary initialization
of the subdevice 'len_chanlist'. That member is only used by subdevices that
support async commands.

Also, remove the unnecessary 'number of channels' check in pci171x_reset().
The boards that used this function, and have analog outputs, always have 2
channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards supported by this driver have a 4K or 1K FIFO that is used when reading
analog input samples when running an async command. The maximum number of samples
in the FIFO is half the FIFO size due to the 2 bytes/sample (12-bit resolution).

For aesthetics, change the 'fifo_half_size' member to a bit-field flag 'has_large_fifo'
and add a new member to the private data to hold the 'max_samples' available in the
FIFO. Refactor the board attach and pci1710_handle_fifo() accordingly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The minimum analog input conversion time is 10000 ns for all board types. Remove
this unnecessary boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'n_aichand' member of the boardinfo is actually a flag indicating that the
board supports differential analog inputs. The number of channels is always
half the single-ended number of channels.

For aesthetics, change the 'n_aichand' member to a bit-field flag 'has_diff_ai'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog output resolution is always 12-bits in this driver. Remove the
unnecessary boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The analog input resolution is always 12-bits in this driver. Remove the
unnecessary boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename this member of the boardinfo to 'has_irq' and change
it to a bit-field flag.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The boards that have digital inputs and outputs always have 16 input channels and
16 output channels.

Replace the 'n_dichan' and 'n_dochan' members of the boardinfo with the fit-field
flag 'has_di_do' and refactor the board attach accordingly.

Remove the unnecessary initialization of the subdevice 'len_chanlist'. That
member is only used by subdevices that support async commands.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'n_counter' member of the boardinfo is actually a flag indicating that the
board exposes a single channel counter subdevice.

For aesthetics, change the 'n_counter' member to a bit-field flag 'has_counter'
and refactor the board attach accordingly.

Remove the unnecessary initialization of the subdevice 'len_chanlist'. That
member is only used by subdevices that support async commands.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver can acquire analog input samples during the async command with
DMA, by using the FIFO, or sample-by-sample using the End-Of-Conversion
interrupt. All three methods do the following sequence:

  1) check for channel dropout
  2) add the sample to the async buffer
  3) advance the channel dropout detection and detect the end of the command

Merge this sequence into a new helper function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Hardware errors should be reported with the COMEDI_CB_ERROR event. This event
will cause the async command to cancel. It's not necessary to also set the
COMEDI_CB_EOA event. Remove these events.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

In das16_interrupt(), use COMEDI_CB_CANCEL_MASK to determine if the async
command is still running and the dma needs to be re-enabled. This will
cause the driver not re-enable the dma if the async buffer overflows
(COMEDI_CB_OVERFLOW), a hardware error occurs (COMEDI_CB_ERROR), or the
command completes (COMEDI_CB_EOA).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up and document the subdevice "runflags". Rename them so they have
comedi namespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

These "polling" functions are not implemented in the comedi core. Remove the
unnecessary prototypes.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The enum comedi_minor_bits and the COMEDI_SUBDEVICE_MINOR_{SHIFT,OFFSET}
defines are not used. Remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver is a mess. It violates the comedi API so much that I doubt
anything actually works.

Drop the addi-data/hwdrv_apci1500.c file and rewrite the subdevice support
functions.

This board has 16 digital inputs (subdevice 0) and 16 digital outputs
(subdevice 1).

It also has three 16-bit timer/counters provided by a Z8536 CIO chip
(subdevice 2). The Z8536 chip is also used to support pattern match
interrupt detection of the first 14 digital input channels.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Modify the sample data returned by the async command to include the current
state of the digital inputs. Otherwise the command needs to be canceled in
order for the user to do an (*insn_bits) operation to check the digital
inputs.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>