- 27 Aug, 2020 40 commits
-
-
Wolfram Sang authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 314139f9 ] When the SSR interrupt is activated, it will detect every STOP condition on the bus, not only the ones after we have been addressed. So, enable this interrupt only after we have been addressed, and disable it otherwise. Fixes: de20d185 ("i2c: rcar: add slave support") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Liu Yi L authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 5f77d6ca ] Set proper masks to avoid invalid input spillover to reserved bits. Signed-off-by:
Liu Yi L <yi.l.liu@intel.com> Signed-off-by:
Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Link: https://lore.kernel.org/r/20200724014925.15523-2-baolu.lu@linux.intel.comSigned-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Colin Ian King authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit dee9d154 ] It is possible for the call to omap_iommu_dump_ctx to return a negative error number, so check for the failure and return the error number rather than pass the negative value to simple_read_from_buffer. Fixes: 14e0e679 ("OMAP: iommu: add initial debugfs support") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200714192211.744776-1-colin.king@canonical.com Addresses-Coverity: ("Improper use of negative value") Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit ce054039 ] Clean up receive processing by dropping the character pointer and keeping the length argument unchanged throughout the function. Also make it more apparent that sysrq processing can consume a characters by adding an explicit continue. Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Johan Hovold authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit ab4cc4ef ] Use an unsigned type for the process-packet buffer argument and give it a more apt name. Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Anton Blanchard authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 89c140bb upstream. Booting with a 4GB LMB size causes us to panic: qemu-system-ppc64: OS terminated: OS panic: Memory block size not suitable: 0x0 Fix pseries_memory_block_size() to handle 64 bit LMBs. Cc: stable@vger.kernel.org Signed-off-by:
Anton Blanchard <anton@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200715000820.1255764-1-anton@ozlabs.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Muchun Song authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 0cb2f137 upstream. We found a case of kernel panic on our server. The stack trace is as follows(omit some irrelevant information): BUG: kernel NULL pointer dereference, address: 0000000000000080 RIP: 0010:kprobe_ftrace_handler+0x5e/0xe0 RSP: 0018:ffffb512c6550998 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8e9d16eea018 RCX: 0000000000000000 RDX: ffffffffbe1179c0 RSI: ffffffffc0535564 RDI: ffffffffc0534ec0 RBP: ffffffffc0534ec1 R08: ffff8e9d1bbb0f00 R09: 0000000000000004 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8e9d1f797060 R14: 000000000000bacc R15: ffff8e9ce13eca00 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 00000008453d0005 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> ftrace_ops_assist_func+0x56/0xe0 ftrace_call+0x5/0x34 tcpa_statistic_send+0x5/0x130 [ttcp_engine] The tcpa_statistic_send is the function being kprobed. After analysis, the root cause is that the fourth parameter regs of kprobe_ftrace_handler is NULL. Why regs is NULL? We use the crash tool to analyze the kdump. crash> dis tcpa_statistic_send -r <tcpa_statistic_send>: callq 0xffffffffbd8018c0 <ftrace_caller> The tcpa_statistic_send calls ftrace_caller instead of ftrace_regs_caller. So it is reasonable that the fourth parameter regs of kprobe_ftrace_handler is NULL. In theory, we should call the ftrace_regs_caller instead of the ftrace_caller. After in-depth analysis, we found a reproducible path. Writing a simple kernel module which starts a periodic timer. The timer's handler is named 'kprobe_test_timer_handler'. The module name is kprobe_test.ko. 1) insmod kprobe_test.ko 2) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' 3) echo 0 > /proc/sys/kernel/ftrace_enabled 4) rmmod kprobe_test 5) stop step 2) kprobe 6) insmod kprobe_test.ko 7) bpftrace -e 'kretprobe:kprobe_test_timer_handler {}' We mark the kprobe as GONE but not disarm the kprobe in the step 4). The step 5) also do not disarm the kprobe when unregister kprobe. So we do not remove the ip from the filter. In this case, when the module loads again in the step 6), we will replace the code to ftrace_caller via the ftrace_module_enable(). When we register kprobe again, we will not replace ftrace_caller to ftrace_regs_caller because the ftrace is disabled in the step 3). So the step 7) will trigger kernel panic. Fix this problem by disarming the kprobe when the module is going away. Link: https://lkml.kernel.org/r/20200728064536.24405-1-songmuchun@bytedance.com Cc: stable@vger.kernel.org Fixes: ae6aa16f ("kprobes: introduce ftrace based optimization") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Muchun Song <songmuchun@bytedance.com> Co-developed-by:
Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by:
Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Junxiao Bi authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 38d51b2d upstream. Dan Carpenter reported the following static checker warning. fs/ocfs2/super.c:1269 ocfs2_parse_options() warn: '(-1)' 65535 can't fit into 32767 'mopt->slot' fs/ocfs2/suballoc.c:859 ocfs2_init_inode_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_inode_steal_slot' fs/ocfs2/suballoc.c:867 ocfs2_init_meta_steal_slot() warn: '(-1)' 65535 can't fit into 32767 'osb->s_meta_steal_slot' That's because OCFS2_INVALID_SLOT is (u16)-1. Slot number in ocfs2 can be never negative, so change s16 to u16. Fixes: 9277f833 ("ocfs2: fix value of OCFS2_INVALID_SLOT") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by:
Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200627001259.19757-1-junxiao.bi@oracle.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Mikulas Patocka authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit bc2fbaa4 upstream. sbi->s_freeinodes_counter is only decreased by the ext2 code, it is never increased. This patch fixes it. Note that sbi->s_freeinodes_counter is only used in the algorithm that tries to find the group for new allocations, so this bug is not easily visible (the only visibility is that the group finding algorithm selects inoptinal result). Link: https://lore.kernel.org/r/alpine.LRH.2.02.2004201538300.19436@file01.intranet.prod.int.rdu2.redhat.comSigned-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Huacai Chen authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 9cce844a upstream. Now CPU#0 is not hotpluggable on MIPS, so prevent to create /sys/devices /system/cpu/cpu0/online which confuses some user-space tools. Cc: stable@vger.kernel.org Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Johannes Berg authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 5981fe5b upstream. This never was intended to be a 'while' loop, it should've just been an 'if' instead of 'while'. Fix this. I noticed this while applying another patch from Ben that intended to fix a busy loop at this spot. Cc: stable@vger.kernel.org Fixes: b16798f5 ("mac80211: mark station unauthorized before key removal") Reported-by:
Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20200803110209.253009ae41ff.I3522aad099392b31d5cf2dcca34cbac7e5832dde@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Coly Li authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 5fe48867 upstream. There are some meta data of bcache are allocated by multiple pages, and they are used as bio bv_page for I/Os to the cache device. for example cache_set->uuids, cache->disk_buckets, journal_write->data, bset_tree->data. For such meta data memory, all the allocated pages should be treated as a single memory block. Then the memory management and underlying I/O code can treat them more clearly. This patch adds __GFP_COMP flag to all the location allocating >0 order pages for the above mentioned meta data. Then their pages are treated as compound pages now. Signed-off-by:
Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
ChangSyun Peng authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit a1c6ae3d upstream. In degraded raid5, we need to read parity to do reconstruct-write when data disks fail. However, we can not read parity from handle_stripe_dirtying() in force reconstruct-write mode. Reproducible Steps: 1. Create degraded raid5 mdadm -C /dev/md2 --assume-clean -l5 -n3 /dev/sda2 /dev/sdb2 missing 2. Set rmw_level to 0 echo 0 > /sys/block/md2/md/rmw_level 3. IO to raid5 Now some io may be stuck in raid5. We can use handle_stripe_fill() to read the parity in this situation. Cc: <stable@vger.kernel.org> # v4.4+ Reviewed-by:
Alex Wu <alexwu@synology.com> Reviewed-by:
BingJing Chang <bingjingc@synology.com> Reviewed-by:
Danny Shih <dannyshih@synology.com> Signed-off-by:
ChangSyun Peng <allenpeng@synology.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Jonathan McDowell authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 592d751c upstream. If we don't have a hardware multicast filter available then instead of silently failing to listen for the requested ethernet broadcast addresses fall back to receiving all multicast packets, in a similar fashion to other drivers with no multicast filter. Cc: stable@vger.kernel.org Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Jonathan McDowell authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit df43dd52 upstream. The IPQ806x does not appear to have a functional multicast ethernet address filter. This was observed as a failure to correctly receive IPv6 packets on a LAN to the all stations address. Checking the vendor driver shows that it does not attempt to enable the multicast filter and instead falls back to receiving all multicast packets, internally setting ALLMULTI. Use the new fallback support in the dwmac1000 driver to correctly achieve the same with the mainline IPQ806x driver. Confirmed to fix IPv6 functionality on an RB3011 router. Cc: stable@vger.kernel.org Signed-off-by:
Jonathan McDowell <noodles@earth.li> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Michael Ellerman authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 0c83b277 upstream. Recently random.h started including percpu.h (see commit f227e3ec ("random32: update the net random state on interrupt and activity")), which broke corenet64_smp_defconfig: In file included from /linux/arch/powerpc/include/asm/paca.h:18, from /linux/arch/powerpc/include/asm/percpu.h:13, from /linux/include/linux/random.h:14, from /linux/lib/uuid.c:14: /linux/arch/powerpc/include/asm/mmu.h:139:22: error: unknown type name 'next_tlbcam_idx' 139 | DECLARE_PER_CPU(int, next_tlbcam_idx); This is due to a circular header dependency: asm/mmu.h includes asm/percpu.h, which includes asm/paca.h, which includes asm/mmu.h Which means DECLARE_PER_CPU() isn't defined when mmu.h needs it. We can fix it by moving the include of paca.h below the include of asm-generic/percpu.h. This moves the include of paca.h out of the #ifdef __powerpc64__, but that is OK because paca.h is almost entirely inside #ifdef CONFIG_PPC64 anyway. It also moves the include of paca.h out of the #ifdef CONFIG_SMP, which could possibly break something, but seems to have no ill effects. Fixes: f227e3ec ("random32: update the net random state on interrupt and activity") Cc: stable@vger.kernel.org # v5.8 Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200804130558.292328-1-mpe@ellerman.id.auSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Filipe Manana authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 4f26433e upstream. While logging an inode, at copy_items(), if we fail to lookup the checksums for an extent we release the destination path, free the ins_data array and then return immediately. However a previous iteration of the for loop may have added checksums to the ordered_sums list, in which case we leak the memory used by them. So fix this by making sure we iterate the ordered_sums list and free all its checksums before returning. Fixes: 3650860b ("Btrfs: remove almost all of the BUG()'s from tree-log.c") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Josef Bacik authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit bf53d468 upstream. In try_to_merge_free_space we attempt to find entries to the left and right of the entry we are adding to see if they can be merged. We search for an entry past our current info (saved into right_info), and then if right_info exists and it has a rb_prev() we save the rb_prev() into left_info. However there's a slight problem in the case that we have a right_info, but no entry previous to that entry. At that point we will search for an entry just before the info we're attempting to insert. This will simply find right_info again, and assign it to left_info, making them both the same pointer. Now if right_info _can_ be merged with the range we're inserting, we'll add it to the info and free right_info. However further down we'll access left_info, which was right_info, and thus get a use-after-free. Fix this by only searching for the left entry if we don't find a right entry at all. The CVE referenced had a specially crafted file system that could trigger this use-after-free. However with the tree checker improvements we no longer trigger the conditions for the UAF. But the original conditions still apply, hence this fix. Reference: CVE-2019-19448 Fixes: 96303081 ("Btrfs: use hybrid extents+bitmap rb tree for free space") CC: stable@vger.kernel.org # 4.4+ Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Rafael J. Wysocki authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit dae68d7f upstream. If context is not NULL in acpiphp_grab_context(), but the is_going_away flag is set for the device's parent, the reference counter of the context needs to be decremented before returning NULL or the context will never be freed, so make that happen. Fixes: edf5bf34 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts") Reported-by:
Vasily Averin <vvs@virtuozzo.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Roger Pau Monne authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 88a479ff upstream. So it can be killed, or else processes can get hung indefinitely waiting for balloon pages. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200727091342.52325-3-roger.pau@citrix.comSigned-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Roger Pau Monne authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 1951fa33 upstream. target_unpopulated is incremented with nr_pages at the start of the function, but the call to free_xenballooned_pages will only subtract pgno number of pages, and thus the rest need to be subtracted before returning or else accounting will be skewed. Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200727091342.52325-2-roger.pau@citrix.comSigned-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Nathan Huckleberry authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit b4d5ec9b upstream. Since clang does not push pc and sp in function prologues, the current implementation of unwind_frame does not work. By using the previous frame's lr/fp instead of saved pc/sp we get valid unwinds on clang-built kernels. The bounds check on next frame pointer must be changed as well since there are 8 less bytes between frames. This fixes /proc/<pid>/stack. Link: https://github.com/ClangBuiltLinux/linux/issues/912Reported-by:
Miles Chen <miles.chen@mediatek.com> Tested-by:
Miles Chen <miles.chen@mediatek.com> Cc: stable@vger.kernel.org Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Nathan Huckleberry <nhuck@google.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Sven Schnelle authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 5b24993c upstream. When using kexec the SBA IOMMU IBASE might still have the RE bit set. This triggers a WARN_ON when trying to write back the IBASE register later, and it also makes some mask calculations fail. Cc: <stable@vger.kernel.org> Signed-off-by:
Sven Schnelle <svens@stackframe.org> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Zheng Bin authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit cb0aae0e upstream. v9fs_mount v9fs_session_init v9fs_cache_session_get_cookie v9fs_random_cachetag -->alloc cachetag v9ses->fscache = fscache_acquire_cookie -->maybe NULL sb = sget -->fail, goto clunk clunk_fid: v9fs_session_close if (v9ses->fscache) -->NULL kfree(v9ses->cachetag) Thus memleak happens. Link: http://lkml.kernel.org/r/20200615012153.89538-1-zhengbin13@huawei.com Fixes: 60e78d2c ("9p: Add fscache support to 9p") Cc: <stable@vger.kernel.org> # v2.6.32+ Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Signed-off-by:
Dominique Martinet <asmadeus@codewreck.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Hector Martin authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 1b7ecc24 upstream. Further investigation of the L-R swap problem on the MS2109 reveals that the problem isn't that the channels are swapped, but rather that they are swapped and also out of phase by one sample. In other words, the issue is actually that the very first frame that comes from the hardware is a half-frame containing only the right channel, and after that everything becomes offset. So introduce a new quirk field to drop the very first 2 bytes that come in after the format is configured and a capture stream starts. This puts the channels in phase and in the correct order. Cc: stable@vger.kernel.org Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200810082400.225858-1-marcan@marcan.stSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 270ef410 upstream. If the minix filesystem tries to map a very large logical block number to its on-disk location, block_to_path() can return offsets that are too large, causing out-of-bounds memory accesses when accessing indirect index blocks. This should be prevented by the check against the maximum file size, but this doesn't work because the maximum file size is read directly from the on-disk superblock and isn't validated itself. Fix this by validating the maximum file size at mount time. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+c7d9ec7a1a7272dd71b3@syzkaller.appspotmail.com Reported-by: syzbot+3b7b03a0c28948054fb5@syzkaller.appspotmail.com Reported-by: syzbot+6e056ee473568865f3e6@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Qiujun Huang <anenbupt@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200628060846.682158-4-ebiggers@kernel.orgSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit facb03dd upstream. If an inode has no links, we need to mark it bad rather than allowing it to be accessed. This avoids WARNINGs in inc_nlink() and drop_nlink() when doing directory operations on a fuzzed filesystem. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+a9ac3de1b5de5fb10efc@syzkaller.appspotmail.com Reported-by: syzbot+df958cf5688a96ad3287@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Qiujun Huang <anenbupt@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200628060846.682158-3-ebiggers@kernel.orgSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Eric Biggers authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit da27e0a0 upstream. Patch series "fs/minix: fix syzbot bugs and set s_maxbytes". This series fixes all syzbot bugs in the minix filesystem: KASAN: null-ptr-deref Write in get_block KASAN: use-after-free Write in get_block KASAN: use-after-free Read in get_block WARNING in inc_nlink KMSAN: uninit-value in get_block WARNING in drop_nlink It also fixes the minix filesystem to set s_maxbytes correctly, so that userspace sees the correct behavior when exceeding the max file size. This patch (of 6): sb_getblk() can fail, so check its return value. This fixes a NULL pointer dereference. Originally from Qiujun Huang. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: syzbot+4a88b2b9dc280f47baf4@syzkaller.appspotmail.com Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Qiujun Huang <anenbupt@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200628060846.682158-1-ebiggers@kernel.org Link: http://lkml.kernel.org/r/20200628060846.682158-2-ebiggers@kernel.orgSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Tom Rix authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit c06c7660 upstream. clang static analysis flags this error qat_uclo.c:297:3: warning: Attempt to free released memory [unix.Malloc] kfree(*init_tab_base); ^~~~~~~~~~~~~~~~~~~~~ When input *init_tab_base is null, the function allocates memory for the head of the list. When there is problem allocating other list elements the list is unwound and freed. Then a check is made if the list head was allocated and is also freed. Keeping track of the what may need to be freed is the variable 'tail_old'. The unwinding/freeing block is while (tail_old) { mem_init = tail_old->next; kfree(tail_old); tail_old = mem_init; } The problem is that the first element of tail_old is also what was allocated for the list head init_header = kzalloc(sizeof(*init_header), GFP_KERNEL); ... *init_tab_base = init_header; flag = 1; } tail_old = init_header; So *init_tab_base/init_header are freed twice. There is another problem. When the input *init_tab_base is non null the tail_old is calculated by traveling down the list to first non null entry. tail_old = init_header; while (tail_old->next) tail_old = tail_old->next; When the unwinding free happens, the last entry of the input list will be freed. So the freeing needs a general changed. If locally allocated the first element of tail_old is freed, else it is skipped. As a bit of cleanup, reset *init_tab_base if it came in as null. Fixes: b4b7e67c ("crypto: qat - Intel(R) QAT ucode part of fw loader") Cc: <stable@vger.kernel.org> Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Hector Martin authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 6e859617 upstream. This is just another Pioneer device with fixed endpoints. Input is dummy but used as feedback (it always returns silence). Cc: stable@vger.kernel.org Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200810082502.225979-1-marcan@marcan.stSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Hector Martin authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit 14a720dc upstream. Matching by device matches all interfaces, which breaks the video/HID portions of the device depending on module load order. Fixes: e337bf19 ("ALSA: usb-audio: add quirk for MacroSilicon MS2109") Cc: stable@vger.kernel.org Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200810045319.128745-1-marcan@marcan.stSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Mirko Dietrich authored
BugLink: https://bugs.launchpad.net/bugs/1892822 commit fec90088 upstream. Adds an entry for Creative USB X-Fi to the rc_config array in mixer_quirks.c to allow use of volume knob on the device. Adds support for newer X-Fi Pro card, known as "Model No. SB1095" with USB ID "041e:3263" Signed-off-by:
Mirko Dietrich <buzz@l4m1.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200806124850.20334-1-buzz@l4m1.deSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Miaohe Lin authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit ce787a5a ] We should fput() file iff FDPUT_FPUT is set. So we should set fput_needed accordingly. Fixes: 00e188ef ("sockfd_lookup_light(): switch to fdget^W^Waway from fget_light") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Qingyu Li authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 26896f01 ] When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked first. Signed-off-by:
Qingyu Li <ieatmuttonchuan@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Xie He authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit c7ca03c2 ] 1. Added a skb->len check This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists. 2. Changed to use needed_headroom instead of hard_header_len to request necessary headroom to be allocated In net/packet/af_packet.c, the function packet_snd first reserves a headroom of length (dev->hard_header_len + dev->needed_headroom). Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header, which calls dev->header_ops->create, to create the link layer header. If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of length (dev->hard_header_len), and assumes the user to provide the appropriate link layer header. So according to the logic of af_packet.c, dev->hard_header_len should be the length of the header that would be created by dev->header_ops->create. However, this driver doesn't provide dev->header_ops, so logically dev->hard_header_len should be 0. So we should use dev->needed_headroom instead of dev->hard_header_len to request necessary headroom to be allocated. This change fixes kernel panic when this driver is used with AF_PACKET SOCK_RAW sockets. Call stack when panic: [ 168.399197] skbuff: skb_under_panic: text:ffffffff819d95fb len:20 put:14 head:ffff8882704c0a00 data:ffff8882704c09fd tail:0x11 end:0xc0 dev:veth0 ... [ 168.399255] Call Trace: [ 168.399259] skb_push.cold+0x14/0x24 [ 168.399262] eth_header+0x2b/0xc0 [ 168.399267] lapbeth_data_transmit+0x9a/0xb0 [lapbether] [ 168.399275] lapb_data_transmit+0x22/0x2c [lapb] [ 168.399277] lapb_transmit_buffer+0x71/0xb0 [lapb] [ 168.399279] lapb_kick+0xe3/0x1c0 [lapb] [ 168.399281] lapb_data_request+0x76/0xc0 [lapb] [ 168.399283] lapbeth_xmit+0x56/0x90 [lapbether] [ 168.399286] dev_hard_start_xmit+0x91/0x1f0 [ 168.399289] ? irq_init_percpu_irqstack+0xc0/0x100 [ 168.399291] __dev_queue_xmit+0x721/0x8e0 [ 168.399295] ? packet_parse_headers.isra.0+0xd2/0x110 [ 168.399297] dev_queue_xmit+0x10/0x20 [ 168.399298] packet_sendmsg+0xbf0/0x19b0 ...... Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Drew Fustini authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit f46fe79f ] This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2. Analysis: ========= The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2: 980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, 981 struct device_node *np, 982 struct pinctrl_map **map, 983 unsigned *num_maps, 984 const char **pgnames) 985 { <snip> 1053 (*map)->type = PIN_MAP_TYPE_MUX_GROUP; 1054 (*map)->data.mux.group = np->name; 1055 (*map)->data.mux.function = np->name; 1056 1057 if (PCS_HAS_PINCONF && function) { 1058 res = pcs_parse_pinconf(pcs, np, function, map); 1059 if (res) 1060 goto free_pingroups; 1061 *num_maps = 2; 1062 } else { 1063 *num_maps = 1; 1064 } However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940: 895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np, 896 struct pcs_function *func, 897 struct pinctrl_map **map) 898 899 { 900 struct pinctrl_map *m = *map; <snip> 917 /* If pinconf isn't supported, don't parse properties in below. */ 918 if (!PCS_HAS_PINCONF) 919 return 0; 920 921 /* cacluate how much properties are supported in current node */ 922 for (i = 0; i < ARRAY_SIZE(prop2); i++) { 923 if (of_find_property(np, prop2[i].name, NULL)) 924 nconfs++; 925 } 926 for (i = 0; i < ARRAY_SIZE(prop4); i++) { 927 if (of_find_property(np, prop4[i].name, NULL)) 928 nconfs++; 929 } 930 if (!nconfs) 919 return 0; 932 933 func->conf = devm_kcalloc(pcs->dev, 934 nconfs, sizeof(struct pcs_conf_vals), 935 GFP_KERNEL); 936 if (!func->conf) 937 return -ENOMEM; 938 func->nconfs = nconfs; 939 conf = &(func->conf[0]); 940 m++; This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single". The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added. Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties. [0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/ Fixes: 9dddb4df ("pinctrl: single: support generic pinconf") Signed-off-by:
Drew Fustini <drew@beagleboard.org> Acked-by:
Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Wang Hai authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 0ffddafc ] Currently the error return path from kobject_init_and_add() is not followed by a call to kobject_put() - which means we are leaking the kobject. Set do_unreg = 1 before kobject_init_and_add() to ensure that kobject_put() can be called in its error patch. Fixes: 901195ed ("Kobject: change GFS2 to use kobject_init_and_add") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Christophe JAILLET authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 36f28f76 ] Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'spider_net_init_chain()'. Fixes: d4ed8f8d ("Spidernet DMA coalescing") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Wang Hai authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 20e64213 ] wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'. Fixes: f7ad1eed ("wl1251: retry power save entry") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730073939.33704-1-wanghai38@huawei.comSigned-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-
Julian Wiedmann authored
BugLink: https://bugs.launchpad.net/bugs/1892822 [ Upstream commit 02472e28 ] Discard events that don't contain any entries. This shouldn't happen, but subsequent code relies on being able to use entry 0. So better be safe than accessing garbage. Fixes: b4d72c08 ("qeth: bridgeport support - basic control") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org> Signed-off-by:
Khalid Elmously <khalid.elmously@canonical.com> Signed-off-by:
Ian May <ian.may@canonical.com> Signed-off-by:
Kelsey Skunberg <kelsey.skunberg@canonical.com>
-