commit 551e553f upstream.

Commit 7b668c06 ("serial: 8250: Fix max baud limit in generic 8250
port") fixed limits of a baud rate setting for a generic 8250 port.
In other words since that commit the baud rate has been permitted to be
within [uartclk / 16 / UART_DIV_MAX; uartclk / 16], which is absolutely
normal for a standard 8250 UART port. But there are custom 8250 ports,
which provide extended baud rate limits. In particular the Mediatek 8250
port can work with baud rates up to "uartclk" speed.

Normally that and any other peculiarity is supposed to be handled in a
custom set_termios() callback implemented in the vendor-specific
8250-port glue-driver. Currently that is how it's done for the most of
the vendor-specific 8250 ports, but for some reason for Mediatek a
solution has been spread out to both the glue-driver and to the generic
8250-port code. Due to that a bug has been introduced, which permitted the
extended baud rate limit for all even for standard 8250-ports. The bug
has been fixed by the commit 7b668c06 ("serial: 8250: Fix max baud
limit in generic 8250 port") by narrowing the baud rates limit back down to
the normal bounds. Unfortunately by doing so we also broke the
Mediatek-specific extended bauds feature.

A fix of the problem described above is twofold. First since we can't get
back the extended baud rate limits feature to the generic set_termios()
function and that method supports only a standard baud rates range, the
requested baud rate must be locally stored before calling it and then
restored back to the new termios structure after the generic set_termios()
finished its magic business. By doing so we still use the
serial8250_do_set_termios() method to set the LCR/MCR/FCR/etc. registers,
while the extended baud rate setting procedure will be performed later in
the custom Mediatek-specific set_termios() callback. Second since a true
baud rate is now fully calculated in the custom set_termios() method we
need to locally update the port timeout by calling the
uart_update_timeout() function. After the fixes described above are
implemented in the 8250_mtk.c driver, the Mediatek 8250-port should
get back to normally working with extended baud rates.

Link: https://lore.kernel.org/linux-serial/20200701211337.3027448-1-danielwinkler@google.com

Fixes: 7b668c06 ("serial: 8250: Fix max baud limit in generic 8250 port")
Reported-by: Daniel Winkler <danielwinkler@google.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: stable <stable@vger.kernel.org>
Tested-by: Claire Chang <tientzu@chromium.org>
Link: https://lore.kernel.org/r/20200714124113.20918-1-Sergey.Semin@baikalelectronics.ruSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f4c23a14 upstream.

I got null-ptr-deref in serial8250_start_tx():

[   78.114630] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[   78.123778] Mem abort info:
[   78.126560]   ESR = 0x86000007
[   78.129603]   EC = 0x21: IABT (current EL), IL = 32 bits
[   78.134891]   SET = 0, FnV = 0
[   78.137933]   EA = 0, S1PTW = 0
[   78.141064] user pgtable: 64k pages, 48-bit VAs, pgdp=00000027d41a8600
[   78.147562] [0000000000000000] pgd=00000027893f0003, p4d=00000027893f0003, pud=00000027893f0003, pmd=00000027c9a20003, pte=0000000000000000
[   78.160029] Internal error: Oops: 86000007 [#1] SMP
[   78.164886] Modules linked in: sunrpc vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce ses enclosure sg sbsa_gwdt ipmi_ssif spi_dw_mmio sch_fq_codel vhost_net tun vhost vhost_iotlb tap ip_tables ext4 mbcache jbd2 ahci hisi_sas_v3_hw libahci hisi_sas_main libsas hns3 scsi_transport_sas hclge libata megaraid_sas ipmi_si hnae3 ipmi_devintf ipmi_msghandler br_netfilter bridge stp llc nvme nvme_core xt_sctp sctp libcrc32c dm_mod nbd
[   78.207383] CPU: 11 PID: 23258 Comm: null-ptr Not tainted 5.8.0-rc6+ #48
[   78.214056] Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V3.B210.01 03/12/2020
[   78.222888] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[   78.228435] pc : 0x0
[   78.230618] lr : serial8250_start_tx+0x160/0x260
[   78.235215] sp : ffff800062eefb80
[   78.238517] x29: ffff800062eefb80 x28: 0000000000000fff
[   78.243807] x27: ffff800062eefd80 x26: ffff202fd83b3000
[   78.249098] x25: ffff800062eefd80 x24: ffff202fd83b3000
[   78.254388] x23: ffff002fc5e50be8 x22: 0000000000000002
[   78.259679] x21: 0000000000000001 x20: 0000000000000000
[   78.264969] x19: ffffa688827eecc8 x18: 0000000000000000
[   78.270259] x17: 0000000000000000 x16: 0000000000000000
[   78.275550] x15: ffffa68881bc67a8 x14: 00000000000002e6
[   78.280841] x13: ffffa68881bc67a8 x12: 000000000000c539
[   78.286131] x11: d37a6f4de9bd37a7 x10: ffffa68881cccff0
[   78.291421] x9 : ffffa68881bc6000 x8 : ffffa688819daa88
[   78.296711] x7 : ffffa688822a0f20 x6 : ffffa688819e0000
[   78.302002] x5 : ffff800062eef9d0 x4 : ffffa68881e707a8
[   78.307292] x3 : 0000000000000000 x2 : 0000000000000002
[   78.312582] x1 : 0000000000000001 x0 : ffffa688827eecc8
[   78.317873] Call trace:
[   78.320312]  0x0
[   78.322147]  __uart_start.isra.9+0x64/0x78
[   78.326229]  uart_start+0xb8/0x1c8
[   78.329620]  uart_flush_chars+0x24/0x30
[   78.333442]  n_tty_receive_buf_common+0x7b0/0xc30
[   78.338128]  n_tty_receive_buf+0x44/0x2c8
[   78.342122]  tty_ioctl+0x348/0x11f8
[   78.345599]  ksys_ioctl+0xd8/0xf8
[   78.348903]  __arm64_sys_ioctl+0x2c/0xc8
[   78.352812]  el0_svc_common.constprop.2+0x88/0x1b0
[   78.357583]  do_el0_svc+0x44/0xd0
[   78.360887]  el0_sync_handler+0x14c/0x1d0
[   78.364880]  el0_sync+0x140/0x180
[   78.368185] Code: bad PC value

SERIAL_PORT_DFNS is not defined on each arch, if it's not defined,
serial8250_set_defaults() won't be called in serial8250_isa_init_ports(),
so the p->serial_in pointer won't be initialized, and it leads a null-ptr-deref.
Fix this problem by calling serial8250_set_defaults() after init uart port.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200721143852.4058352-1-yangyingliang@huawei.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 926234f1 upstream.

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this.

Fixes: 1e15687e ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions")
Cc: <stable@vger.kernel.org> #3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fc846e9d upstream.

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this, adjusting the checks
for invalid channels so that enabled channel bits that would have been
lost by shifting are also checked for validity.  Only channels 0 to 15
are valid.

Fixes: a8c66b68 ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions")
Cc: <stable@vger.kernel.org> #4.0+: ef75e14a: staging: comedi: verify array index is correct before using it
Cc: <stable@vger.kernel.org> #4.0+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f07804ec upstream.

`ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions
for the "interrupt" subdevice.  When `data[0]` is
`INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger.  When
`data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising
and falling edge detection for the digital trigger, using a base channel
number (or shift amount) in `data[3]`, a rising edge bitmask in
`data[4]` and falling edge bitmask in `data[5]`.

If the base channel number (shift amount) is greater than or equal to
the number of channels (24) of the digital input subdevice, there are no
changes to the rising and falling edges, so the mask of channels to be
changed can be set to 0, otherwise the mask of channels to be changed,
and the rising and falling edge bitmasks are shifted by the base channel
number before calling `ni6527_set_edge_detection()` to change the
appropriate registers.  Unfortunately, the code is comparing the base
channel (shift amount) to the interrupt subdevice's number of channels
(1) instead of the digital input subdevice's number of channels (24).
Fix it by comparing to 32 because all shift amounts for an `unsigned
int` must be less than that and everything from bit 24 upwards is
ignored by `ni6527_set_edge_detection()` anyway.

Fixes: 110f9e68 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0bd0db42 upstream.

The `INSN_CONFIG` comedi instruction with sub-instruction code
`INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is
used as a right shift amount for other bitmask values without being
checked.  Shift amounts greater than or equal to 32 will result in
undefined behavior.  Add code to deal with this.

Fixes: 33cdce62 ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG")
Cc: <stable@vger.kernel.org> #3.8+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.ukSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit faaff976 upstream.

As syzkaller detected, wlan-ng driver does not do sanity check of
endpoints in prism2sta_probe_usb(), add check for xfer direction and type

Reported-and-tested-by: syzbot+c2a1fa67c02faa0de723@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=c2a1fa67c02faa0de723Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200722161052.999754-1-rkovhaev@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0e670518 upstream.

This reverts commit 9ffad926.

Upon additional testing with older servers, it was found that
the original commit introduced a regression when using the old SMB1
dialect and rsyncing over an existing file.

The patch will need to be respun to address this, likely including
a larger refactoring of the SMB1 and SMB3 rename code paths to make
it less confusing and also to address some additional rename error
cases that SMB3 may be able to workaround.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Patrick Fernie <patrick.fernie@gmail.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dbb0897e upstream.

The ASM2142/ASM3142 (same PCI IDs) does not support full 64-bit DMA
addresses, which can cause silent memory corruption or IOMMU errors on
platforms that use the upper bits. Add the XHCI_NO_64BIT_SUPPORT quirk
to fix this issue.
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200717112734.328432-1-cyrozap@gmail.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5ce1a24d upstream.

The wMaxPacketSize field of endpoint descriptor may be zero
as default value in alternate interface, and they are not
actually selected when start stream, so skip them when try to
allocate bandwidth.

Cc: stable <stable@vger.kernel.org>
Fixes: 0cbd4b34 ("xhci: mediatek: support MTK xHCI host controller")
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1594360672-2076-1-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 81e96851 ]

The clang integrated assembler requires the 'cmp' instruction to
have a length prefix here:

arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl')
 cmp $0xffffffff,-24(%ebp)
 ^

Make this a 32-bit comparison, which it was clearly meant to be.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.deSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5afc7855 ]

Rather than open-code test_tsk_thread_flag() at each callsite, simply
replace the couple of offenders with calls to test_tsk_thread_flag()
directly.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c8f8529e ]

gr_ep_init() does not assign the allocated request anywhere if allocation
of memory for the buffer fails. This is a memory leak fixed by the given
patch.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 87730ccb ]

DMA transaction time to completion is a function of PCI bandwidth,
transaction size and a queue depth.  So hard coded value for timeouts
might be wrong for some scenarios.
Signed-off-by: Leonid Ravich <Leonid.Ravich@emc.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20200701184816.29138-1-leonid.ravich@dell.comSigned-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e84861fe ]

This function is used by dev_get_regmap() to retrieve a regmap for the
specified device. If the device has more than one regmap, the name parameter
can be used to specify one.

The code here uses a pointer comparison to check for equal strings. This
however will probably always fail, as the regmap->name is allocated via
kstrdup_const() from the regmap's config->name.

Fix this by using strcmp() instead.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5b78fac4 ]

pm_runtime_get_sync() increments the runtime PM usage counter even
when it returns an error code. Thus a pairing decrement is needed on
the error handling path to keep the counter balanced.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200624064626.19855-1-dinghao.liu@zju.edu.cnSigned-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a5d81646 ]

The Maxxter KB-BT-001 Bluetooth keyboard, which looks somewhat like the
Apple Wireless Keyboard, is using the vendor and product IDs (05AC:0239)
of the Apple Wireless Keyboard (2009 ANSI version) <sigh>.

But its F1 - F10 keys are marked as sending F1 - F10, not the special
functions hid-apple.c maps them too; and since its descriptors do not
contain the HID_UP_CUSTOM | 0x0003 usage apple-hid looks for for the
Fn-key, apple_setup_input() never gets called, so F1 - F6 are mapped
to key-codes which have not been set in the keybit array causing them
to not send any events at all.

The lack of a usage code matching the Fn key in the clone is actually
useful as this allows solving this problem in a generic way.

This commits adds a fn_found flag and it adds a input_configured
callback which checks if this flag is set once all usages have been
mapped. If it is not set, then assume this is a clone and clear the
quirks bitmap so that the hid-apple code does not add any special
handling to this keyboard.

This fixes F1 - F6 not sending anything at all and F7 - F12 sending
the wrong codes on the Maxxter KB-BT-001 Bluetooth keyboard and on
similar clones.

Cc: Joao Moreno <mail@joaomoreno.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 43e666ac ]

The Mediacom FlexBook edge13 uses the SIPODEV SP1064 touchpad, which does not
supply descriptors, so it has to be added to the override list.
Signed-off-by: Federico Ricchiuto <fed.ricchiuto@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d178770d ]

Currently the basepath is removed only from the beginning of the string.
When the symbol is inlined and there's multiple line outputs of
addr2line, only the first line would have basepath removed.

Change to remove the basepath prefix from all lines.

Fixes: 31013836 ("scripts/decode_stacktrace: match basepath using shell prefix operator, not regex")
Co-developed-by: Shik Chen <shik@chromium.org>
Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org>
Signed-off-by: Shik Chen <shik@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Nicolas Boichat <drinkcat@chromium.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lkml.kernel.org/r/20200720082709.252805-1-pihsun@chromium.orgSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bca9749b ]

If try_toggle_control_gpio() failed in smc_drv_probe(), free_netdev(ndev)
should be called to free the ndev created earlier. Otherwise, a memleak
will occur.

Fixes: 7d2911c4 ("net: smc91x: Fix gpios for device tree based booting")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 473309fb ]

From Documentation/networking/timestamping.txt:

  A driver which supports hardware time stamping shall update the
  struct with the actual, possibly more permissive configuration.

Do update the struct passed when we upscale the requested time
stamping mode.

Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.")
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c28d9a28 ]

If ax88172a_unbind() fails, make sure that the return code is
less than zero so that cleanup is done properly and avoid UAF.

Fixes: a9a51bd7 ("ax88172a: fix information leak on short answers")
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reported-by: syzbot+4cd84f527bf4a10fc9c1@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3195c470 ]

The size used when calling 'pci_alloc_consistent()' and
'pci_free_consistent()' should match.

Fix it and have it consistent with the corresponding call in 'rr_close()'.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 163e9ef6 ]

The driver was modified to not rely on rtnl lock to protect link
settings about 2 years ago.  The pause setting was missed when
making that change.  Fix it by acquiring link_lock mutex before
calling bnxt_hwrm_set_pause().

Fixes: e2dc9b6e ("bnxt_en: Don't use rtnl lock to protect link change logic in workqueue.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 48cfa61b ]

It is possible to cause a btrfs mount to fail by racing it with a slow
umount. The crux of the sequence is generic_shutdown_super not yet
calling sop->put_super before btrfs_mount_root calls btrfs_open_devices.
If that occurs, btrfs_open_devices will decide the opened counter is
non-zero, increment it, and skip resetting fs_devices->total_rw_bytes to
0. From here, mount will call sget which will result in grab_super
trying to take the super block umount semaphore. That semaphore will be
held by the slow umount, so mount will block. Before up-ing the
semaphore, umount will delete the super block, resulting in mount's sget
reliably allocating a new one, which causes the mount path to dutifully
fill it out, and increment total_rw_bytes a second time, which causes
the mount to fail, as we see double the expected bytes.

Here is the sequence laid out in greater detail:

CPU0                                                    CPU1
down_write sb->s_umount
btrfs_kill_super
  kill_anon_super(sb)
    generic_shutdown_super(sb);
      shrink_dcache_for_umount(sb);
      sync_filesystem(sb);
      evict_inodes(sb); // SLOW

                                              btrfs_mount_root
                                                btrfs_scan_one_device
                                                fs_devices = device->fs_devices
                                                fs_info->fs_devices = fs_devices
                                                // fs_devices-opened makes this a no-op
                                                btrfs_open_devices(fs_devices, mode, fs_type)
                                                s = sget(fs_type, test, set, flags, fs_info);
                                                  find sb in s_instances
                                                  grab_super(sb);
                                                    down_write(&s->s_umount); // blocks

      sop->put_super(sb)
        // sb->fs_devices->opened == 2; no-op
      spin_lock(&sb_lock);
      hlist_del_init(&sb->s_instances);
      spin_unlock(&sb_lock);
      up_write(&sb->s_umount);
                                                    return 0;
                                                  retry lookup
                                                  don't find sb in s_instances (deleted by CPU0)
                                                  s = alloc_super
                                                  return s;
                                                btrfs_fill_super(s, fs_devices, data)
                                                  open_ctree // fs_devices total_rw_bytes improperly set!
                                                    btrfs_read_chunk_tree
                                                      read_one_dev // increment total_rw_bytes again!!
                                                      super_total_bytes < fs_devices->total_rw_bytes // ERROR!!!

To fix this, we clear total_rw_bytes from within btrfs_read_chunk_tree
before the calls to read_one_dev, while holding the sb umount semaphore
and the uuid mutex.

To reproduce, it is sufficient to dirty a decent number of inodes, then
quickly umount and mount.

  for i in $(seq 0 500)
  do
    dd if=/dev/zero of="/mnt/foo/$i" bs=1M count=1
  done
  umount /mnt/foo&
  mount /mnt/foo

does the trick for me.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 580c079b upstream.

At btrfs_find_all_roots_safe() we allocate a ulist and set the **roots
argument to point to it. However if later we fail due to an error returned
by find_parent_nodes(), we free that ulist but leave a dangling pointer in
the **roots argument. Upon receiving the error, a caller of this function
can attempt to free the same ulist again, resulting in an invalid memory
access.

One such scenario is during qgroup accounting:

btrfs_qgroup_account_extents()

 --> calls btrfs_find_all_roots() passes &new_roots (a stack allocated
     pointer) to btrfs_find_all_roots()

   --> btrfs_find_all_roots() just calls btrfs_find_all_roots_safe()
       passing &new_roots to it

     --> allocates ulist and assigns its address to **roots (which
         points to new_roots from btrfs_qgroup_account_extents())

     --> find_parent_nodes() returns an error, so we free the ulist
         and leave **roots pointing to it after returning

 --> btrfs_qgroup_account_extents() sees btrfs_find_all_roots() returned
     an error and jumps to the label 'cleanup', which just tries to
     free again the same ulist

Stack trace example:

 ------------[ cut here ]------------
 BTRFS: tree first key check failed
 WARNING: CPU: 1 PID: 1763215 at fs/btrfs/disk-io.c:422 btrfs_verify_level_key+0xe0/0x180 [btrfs]
 Modules linked in: dm_snapshot dm_thin_pool (...)
 CPU: 1 PID: 1763215 Comm: fsstress Tainted: G        W         5.8.0-rc3-btrfs-next-64 #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:btrfs_verify_level_key+0xe0/0x180 [btrfs]
 Code: 28 5b 5d (...)
 RSP: 0018:ffffb89b473779a0 EFLAGS: 00010286
 RAX: 0000000000000000 RBX: ffff90397759bf08 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff
 RBP: ffff9039a419c000 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: ffffb89b43301000 R12: 000000000000005e
 R13: ffffb89b47377a2e R14: ffffb89b473779af R15: 0000000000000000
 FS:  00007fc47e1e1000(0000) GS:ffff9039ac200000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fc47e1df000 CR3: 00000003d9e4e001 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  read_block_for_search+0xf6/0x350 [btrfs]
  btrfs_next_old_leaf+0x242/0x650 [btrfs]
  resolve_indirect_refs+0x7cf/0x9e0 [btrfs]
  find_parent_nodes+0x4ea/0x12c0 [btrfs]
  btrfs_find_all_roots_safe+0xbf/0x130 [btrfs]
  btrfs_qgroup_account_extents+0x9d/0x390 [btrfs]
  btrfs_commit_transaction+0x4f7/0xb20 [btrfs]
  btrfs_sync_file+0x3d4/0x4d0 [btrfs]
  do_fsync+0x38/0x70
  __x64_sys_fdatasync+0x13/0x20
  do_syscall_64+0x5c/0xe0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fc47e2d72e3
 Code: Bad RIP value.
 RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3
 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003
 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003
 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8
 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50
 irq event stamp: 0
 hardirqs last  enabled at (0): [<0000000000000000>] 0x0
 hardirqs last disabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0
 softirqs last  enabled at (0): [<ffffffffb8eb5e85>] copy_process+0x755/0x1eb0
 softirqs last disabled at (0): [<0000000000000000>] 0x0
 ---[ end trace 8639237550317b48 ]---
 BTRFS error (device sdc): tree first key mismatch detected, bytenr=62324736 parent_transid=94 key expected=(262,108,1351680) has=(259,108,1921024)
 general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
 CPU: 2 PID: 1763215 Comm: fsstress Tainted: G        W         5.8.0-rc3-btrfs-next-64 #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 RIP: 0010:ulist_release+0x14/0x60 [btrfs]
 Code: c7 07 00 (...)
 RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282
 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840
 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840
 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840
 FS:  00007fc47e1e1000(0000) GS:ffff9039ac600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f8c1c0a51c8 CR3: 00000003d9e4e004 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  ulist_free+0x13/0x20 [btrfs]
  btrfs_qgroup_account_extents+0xf3/0x390 [btrfs]
  btrfs_commit_transaction+0x4f7/0xb20 [btrfs]
  btrfs_sync_file+0x3d4/0x4d0 [btrfs]
  do_fsync+0x38/0x70
  __x64_sys_fdatasync+0x13/0x20
  do_syscall_64+0x5c/0xe0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fc47e2d72e3
 Code: Bad RIP value.
 RSP: 002b:00007fffa32098c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc47e2d72e3
 RDX: 00007fffa3209830 RSI: 00007fffa3209830 RDI: 0000000000000003
 RBP: 000000000000072e R08: 0000000000000001 R09: 0000000000000003
 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000000003e8
 R13: 0000000051eb851f R14: 00007fffa3209970 R15: 00005607c4ac8b50
 Modules linked in: dm_snapshot dm_thin_pool (...)
 ---[ end trace 8639237550317b49 ]---
 RIP: 0010:ulist_release+0x14/0x60 [btrfs]
 Code: c7 07 00 (...)
 RSP: 0018:ffffb89b47377d60 EFLAGS: 00010282
 RAX: 6b6b6b6b6b6b6b6b RBX: ffff903959b56b90 RCX: 0000000000000000
 RDX: 0000000000000001 RSI: 0000000000270024 RDI: ffff9036e2adc840
 RBP: ffff9036e2adc848 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffff9036e2adc840
 R13: 0000000000000015 R14: ffff9039a419ccf8 R15: ffff90395d605840
 FS:  00007fc47e1e1000(0000) GS:ffff9039ad200000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f6a776f7d40 CR3: 00000003d9e4e002 CR4: 00000000003606e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fix this by making btrfs_find_all_roots_safe() set *roots to NULL after
it frees the ulist.

Fixes: 8da6d581 ("Btrfs: added btrfs_find_all_roots()")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5cacc6f5 upstream.

The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage,
so the correct mask is 0x7 not 0x3.

Because of this wrong mask we were programming the ldo bits
to a setting of binary 001 (0x05 & 0x03) instead of binary 101
when moving to SND_SOC_BIAS_PREPARE.

According to the datasheet 001 is a reserved value, so no idea
what it did, since the driver was working fine before I guess we
got lucky and it does something which is ok.

Fixes: 5e8351de ("ASoC: add RT5670 CODEC driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200628155231.71089-3-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 60379ba0 upstream.

snd_info_get_line() has a sanity check of NULL buffer -- both buffer
itself being NULL and buffer->buffer being NULL.  Basically both
checks are valid and necessary, but the problem is that it's with
snd_BUG_ON() macro that triggers WARN_ON().  The latter condition
(NULL buffer->buffer) can be met arbitrarily by user since the buffer
is allocated at the first write, so it means that user can trigger
WARN_ON() at will.

This patch addresses it by simply moving buffer->buffer NULL check out
of snd_BUG_ON() so that spurious WARNING is no longer triggered.

Reported-by: syzbot+e42d0746c3c3699b6061@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200717084023.5928-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fe5ed7ab upstream.

If a tracee is uprobed and it hits int3 inserted by debugger, handle_swbp()
does send_sig(SIGTRAP, current, 0) which means si_code == SI_USER. This used
to work when this code was written, but then GDB started to validate si_code
and now it simply can't use breakpoints if the tracee has an active uprobe:

	# cat test.c
	void unused_func(void)
	{
	}
	int main(void)
	{
		return 0;
	}

	# gcc -g test.c -o test
	# perf probe -x ./test -a unused_func
	# perf record -e probe_test:unused_func gdb ./test -ex run
	GNU gdb (GDB) 10.0.50.20200714-git
	...
	Program received signal SIGTRAP, Trace/breakpoint trap.
	0x00007ffff7ddf909 in dl_main () from /lib64/ld-linux-x86-64.so.2
	(gdb)

The tracee hits the internal breakpoint inserted by GDB to monitor shared
library events but GDB misinterprets this SIGTRAP and reports a signal.

Change handle_swbp() to use force_sig(SIGTRAP), this matches do_int3_user()
and fixes the problem.

This is the minimal fix for -stable, arch/x86/kernel/uprobes.c is equally
wrong; it should use send_sigtrap(TRAP_TRACE) instead of send_sig(SIGTRAP),
but this doesn't confuse GDB and needs another x86-specific patch.
Reported-by: Aaron Merey <amerey@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200723154420.GA32043@redhat.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 65caafd0 upstream.

Reverting commit d03727b2 "NFSv4 fix CLOSE not waiting for
direct IO compeletion". This patch made it so that fput() by calling
inode_dio_done() in nfs_file_release() would wait uninterruptably
for any outstanding directIO to the file (but that wait on IO should
be killable).

The problem the patch was also trying to address was REMOVE returning
ERR_ACCESS because the file is still opened, is supposed to be resolved
by server returning ERR_FILE_OPEN and not ERR_ACCESS.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 0156e76d ]

Tegra TRM says worst-case reply time is 1216us, and this should fix some
spurious timeouts that have been popping up.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 28b18e4e ]

clang static analysis flags this garbage return

drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn]
        return v;
        ^~~~~~~~

static inline u16 gm_phy_read( ...
{
	u16 v;
	__gm_phy_read(hw, port, reg, &v);
	return v;
}

__gm_phy_read can return without setting v.

So handle similar to skge.c's gm_phy_read, initialize v.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9dc829a1 ]

When this driver transmits data,
  first this driver will remove a pseudo header of 1 byte,
  then the lapb module will prepend the LAPB header of 2 or 3 bytes,
  then this driver will prepend a length field of 2 bytes,
  then the underlying Ethernet device will prepend its own header.

So, the header length required should be:
  -1 + 3 + 2 + "the header length needed by the underlying device".

This patch fixes kernel panic when this driver is used with AF_PACKET
SOCK_DGRAM sockets.
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0d5ab144 ]

Increment *pos in the cpuinfo_op.next to fix the following warning
triggered by cat /proc/cpuinfo:

  seq_file: buggy .next function c_next did not update position index
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 73f99413 ]

Building xtensa kernel with gcc-10 produces the following warnings:
  arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_and_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]
  arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types
    for built-in function ‘__sync_fetch_and_or_4’;
    expected ‘unsigned int(volatile void *, unsigned int)’
    [-Wbuiltin-declaration-mismatch]

Fix declarations of these functions to avoid the warning.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5aee52c4 ]

clang static analysis flags several null function pointer problems.

drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage]
spi_transport_max_attr(offset, "%d\n");
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Reviewing the store_spi_store_max macro

	if (i->f->set_##field)
		return -EINVAL;

should be

	if (!i->f->set_##field)
		return -EINVAL;

Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.comReviewed-by: James Bottomley <jejb@linux.ibm.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0b467b63 ]

Without this patch, eapol frames cannot be received in mesh
mode, when 802.1X should be used. Initially only a MGTK is
defined, which is found and set as rx->key, when there are
no other keys set. ieee80211_drop_unencrypted would then
drop these eapol frames, as they are data frames without
encryption and there exists some rx->key.

Fix this by differentiating between mesh eapol frames and
other data frames with existing rx->key. Allow mesh mesh
eapol frames only if they are for our vif address.

With this patch in-place, ieee80211_rx_h_mesh_fwding continues
after the ieee80211_drop_unencrypted check and notices, that
these eapol frames have to be delivered locally, as they should.
Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de
[small code cleanups]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 69339d08 ]

uart0_pins is defined as:
static const unsigned uart0_pins[] = {135, 136, 137, 138, 139};

which npins is wronly specified as 9 later
	{
		.name = "uart0",
		.pins = uart0_pins,
		.npins = 9,
	},

npins should be 5 instead of 9 according to the definition.
Signed-off-by: Jacky Hu <hengqing.hu@gmail.com>
Link: https://lore.kernel.org/r/20200616015024.287683-1-hengqing.hu@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

This patch is to fix the backport of the upstream patch:
cc51e542 x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+

When this was backported to the 4.9 and 4.14 stable branches the line
+       c->x86_cache_bits = c->x86_phys_bits;
was applied in the wrong place, being added to the
identify_cpu_without_cpuid() function instead of the get_cpu_cap()
function which it was correctly applied to in the 4.4 backport.

This means that x86_cache_bits is not set correctly resulting in the
following warning due to the cache bits being left uninitalised (zero).

 WARNING: CPU: 0 PID: 7566 at arch/x86/kvm/mmu.c:284 kvm_mmu_set_mmio_spte_mask+0x4e/0x60 [kvm
 Modules linked in: kvm_intel(+) kvm irqbypass ipv6 crc_ccitt binfmt_misc evdev lpc_ich mfd_core ioatdma pcc_cpufreq dca ena acpi_power_meter hwmon acpi_pad button ext4 crc16 mbcache jbd2 fscrypto nvme nvme_core dm_mirror dm_region_hash dm_log dm_mod dax
 Hardware name: Amazon EC2 i3.metal/Not Specified, BIOS 1.0 10/16/2017
 task: ffff88ff77704c00 task.stack: ffffc9000edac000
 RIP: 0010:kvm_mmu_set_mmio_spte_mask+0x4e/0x60 [kvm
 RSP: 0018:ffffc9000edafc60 EFLAGS: 00010206
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000ffffff45
 RDX: 000000000000002e RSI: 0008000000000001 RDI: 0008000000000001
 RBP: ffffffffa036f000 R08: ffffffffffffff80 R09: ffffe8ffffccb3c0
 R10: 0000000000000038 R11: 0000000000000000 R12: 0000000000005b80
 R13: ffffffffa0370e40 R14: 0000000000000001 R15: ffff88bf7c0927e0
 FS:  00007fa316f24740(0000) GS:ffff88bf7f600000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fa316ea0000 CR3: 0000003f7e986004 CR4: 00000000003606f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  kvm_mmu_module_init+0x166/0x230 [kvm
  kvm_arch_init+0x5d/0x150 [kvm
  kvm_init+0x1c/0x2d0 [kvm
  ? hardware_setup+0x4a6/0x4a6 [kvm_intel
  vmx_init+0x23/0x6aa [kvm_intel
  ? hardware_setup+0x4a6/0x4a6 [kvm_intel
  do_one_initcall+0x3e/0x15d
  do_init_module+0x5b/0x1e5
  load_module+0x19e6/0x1dc0
  ? SYSC_init_module+0x13b/0x170
  SYSC_init_module+0x13b/0x170
  do_syscall_64+0x67/0x110
  entry_SYSCALL_64_after_hwframe+0x41/0xa6
 RIP: 0033:0x7fa316828f3a
 RSP: 002b:00007ffc9d65c1f8 EFLAGS: 00000246 ORIG_RAX: 00000000000000af
 RAX: ffffffffffffffda RBX: 00007fa316b08849 RCX: 00007fa316828f3a
 RDX: 00007fa316b08849 RSI: 0000000000071328 RDI: 00007fa316e37000
 RBP: 0000000000b47e80 R08: 0000000000000003 R09: 0000000000000000
 R10: 00007fa316822dba R11: 0000000000000246 R12: 0000000000b46340
 R13: 0000000000b464c0 R14: 0000000000000000 R15: 0000000000040000
 Code: e9 65 06 00 75 25 48 b8 00 00 00 00 00 00 00 40 48 09 c6 48 09 c7 48 89 35 f8 65 06 00 48 89 3d f9 65 06 00 c3 0f 0b 0f 0b eb d2 <0f> 0b eb d7 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44

Fixes: 4.9.x  ef3d45c9 x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+
Fixes: 4.14.x ec403483 x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+
Cc: stable@vger.kernel.org # 4.9.x-4.14.x
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Reviewed-by: Samuel Mendoza-Jonas <samjonas@amazon.com>
Reviewed-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>