Add the AM62 version of sa3ul to the compatible list.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Commit d2825fa9 ("crypto: sm3,sm4 - move into crypto directory")
moved the sm4 library implementation from the lib/crypto directory to
the crypto directory and configured the name as CRYPTO_SM4. The arm64
SM4 NEON/CE implementation depends on this and needs to be modified
uniformly.

Fixes: 4f1aef9b ("crypto: arm64/sm4 - add ARMv8 NEON implementation")
Fixes: 5b33e0ec ("crypto: arm64/sm4 - add ARMv8 Crypto Extensions implementation")
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The hardware needs aligned sgl dma address. So expend the sgl_size to
align 64 bytes.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1. Add some debugging registers.
2. Add last word dumping function during zip engine controller reset.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

1. Add some debugging registers.
2. Add last word dumping function during hpre engine controller reset.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add last word dumping function during sec engine controller reset.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add last word dumping function during acc engines controller reset.
The last words are reported to the printed information during the
reset. The dmesg information included qm debugging registers and
engine debugging registers. It can help to improve debugging
capability.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Update documentation describing DebugFS that could help
to check the change of register values.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Update documentation describing DebugFS that could help
to check the change of register values.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Update documentation describing DebugFS that could help
to check the change of register values.
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of the register is changed after the task running. A debugfs
file node is added to help users to check the change of register values.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of the register is changed after the task running. A debugfs
file node is added to help users to check the change of register values.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The value of the register is changed after the task running. A debugfs
file node is added to help users to check the change of register values.
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add register detection function to accelerator. Provided a tool that
user can checking differential register through Debugfs.
e.g.
    cd /sys/kernel/debug/hisi_zip/<bdf>/zip_dfx
    cat diff_regs
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Kai Ye <yekai13@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace `if (!req_ctx->updated)` with `else` for simplification
and add curly brackets according to the kernel coding style:

"Do not unnecessarily use braces where a single statement will do."

...

"This does not apply if only one branch of a conditional statement is
a single statement; in the latter case use braces in both branches"

Please refer to:
https://www.kernel.org/doc/html/v5.17-rc8/process/coding-style.htmlSigned-off-by: Yihao Han <hanyihao@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a driver to access the hardware random number generator on the
Polarfire SoC. The hwrng can only be accessed via the system controller,
so use the mailbox interface the system controller exposes to access the
hwrng.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove unnecessary line wrapping for the
adf_enable_vf2pf_interrupts() function, and harmonize pfvf_ops text.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change adf_gen4_enable_vf2pf_interrupts() to use a u32 variable,
consistently with both other GEN4 pfvf_ops and pfvf_ops of other
generations.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

As a consequence of the refactored VF2PF interrupt handling logic, a
function that disables specific VF2PF interrupts is no longer needed.
Instead, a simpler function that disables all the interrupts, also
hiding the device specific amount of VFs to be disabled from the
pfvf_ops users, would be sufficient.

This patch replaces disable_vf2pf_interrupts() with the new
disable_all_vf2pf_interrupts(), which doesn't need any argument and
disables all the VF2PF interrupts.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Replace hard coded VF masks in adf_gen2_pfvf.c with the recently
introduced ADF_GEN2_VF_MSK.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Change the VF2PF interrupt handler in the PF ISR and the definition of
the internal PFVF API to correct the current implementation, which can
result in missed interrupts.

More specifically, current HW generations consider a write to the mask
register, regardless of the value, as an acknowledge of any pending
VF2PF interrupt. Therefore, if there is an interrupt between the source
register read and the mask register write, such interrupt will not be
delivered and silently acknowledged, resulting in a lost VF2PF message.

To work around the problem, rather than disabling specific interrupts,
disable all the interrupts and re-enable only the ones that we are not
serving (excluding the already disabled ones too). This will force any
other pending interrupt to be triggered and be serviced by a subsequent
ISR.

This new approach requires, however, changes to the interrupt related
pfvf_ops functions. In particular, get_vf2pf_sources() has now been
removed in favor of disable_pending_vf2pf_interrupts(), which not only
retrieves and returns the pending (and enabled) sources, but also
disables them.
As a consequence, introduce the adf_disable_pending_vf2pf_interrupts()
utility in place of adf_disable_vf2pf_interrupts_irq(), which is no
longer needed.

Cc: stable@vger.kernel.org
Fixes: 993161d3 ("crypto: qat - fix handling of VF to PF interrupts")
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

PFVF Block Message requests for CRC use 0-based values to indicate
amounts, which have to be remapped to 1-based values on the receiving
side.

This patch fixes one debug print which was however using the wire value.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove an unintentional extra space and improve the readability of a
PFVF related code comment.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Spurious PFVF interrupts can happen when either the ISR is invoked
without a valid source being set or, otherwise, when no interrupt bit
is set in the PFVF register containing the message.

The latter test was present for GEN2 devices but missing for GEN4, this
patch fills the gap.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

PFVF protocol version 0 is not a valid version, but PF drivers
currently would report any such version from VFs as compatible.
This patch adds an extra check for the invalid PFVF protocol
version 0.
Signed-off-by: Wojciech Ziemba <wojciech.ziemba@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

VF drivers are notified via PFVF of the VFs being disabled, but
such notification was not propagated within the VF driver.
Dispatch the ADF_EVENT_RESTARTING event by adding a missing call
to adf_dev_restarting_notify().
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Previously, the GEN4 host driver supported SR-IOV but had no working
implementation of the PFVF protocol to communicate with VF drivers.
Since all the host drivers for QAT devices now support both SR-IOV and
PFVF, remove the old and unnecessary checks to test PFVF support.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The functions adf_enable_pf2vf_interrupts(), adf_flush_vf_wq() and
adf_disable_pf2vf_interrupts() are not referenced when the driver is
compiled with CONFIG_PCI_IOV=n. This patch removes these unused stubs.
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Remove unnecessary braces around a single statement in a for loop.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When the driver starts the device, it enables all the necessary
interrupts. However interrupts associated to host rings are enabled by
default on all GEN2 devices (except for dh895x) even when SR-IOV is
active. Fix this behaviour by checking if data structures associated to
VFs have been allocated to determine whether to enable such interrupts
or not.

Since the logic for the fix is the same across GEN2 devices, replace
the function to be fixed (adf_enable_ints()) with a single one
(adf_gen2_enable_ints()) in the common GEN2 code in adf_gen2_hw_data.c.
Likewise, remove the unnecessary duplication of defines too.
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The capability detection logic clears bits for the features that are
disabled in a certain SKU. For example, if the bit associate to
compression is not present in the LEGFUSE register, the correspondent
bit is cleared in the capability mask.
This change adds the compression capability to the mask as this was
missing in the commit that enhanced the capability detection logic.

Fixes: cfe4894e ("crypto: qat - set COMPRESSION capability for QAT GEN2")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Set the CIPHER capability for QAT DH895XCC devices if the hardware supports
it. This is done if both the CIPHER and the AUTHENTICATION engines are
available on the device.

Fixes: ad1332aa ("crypto: qat - add support for capability detection")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Use a fine grained specification of DMA mapping directions
in certain cases, allowing both a more optimized operation
as well as shushing out a harmless, though persky
dma-debug warning.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Rearrange init calls to avoid the rare race condition of
the cipher algs being registered and used while we still
init the hash code which uses the HW without proper lock.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reported-by: Dung Nguyen <dung.nguyen.zy@renesas.com>
Tested-by: Jing Dan <jing.dan.nx@renesas.com>
Tested-by: Dung Nguyen <dung.nguyen.zy@renesas.com>
Fixes: 63893811("crypto: ccree - add ahash support")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Even if an IOMMU might be present for some PCI segment in the system,
that doesn't necessarily mean it provides translation for the device
we care about. Replace iommu_present() with a more appropriate check.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.

While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.

In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

CC_ATTR_HOST_MEM_ENCRYPT is used to relay that memory encryption has been
activated by the kernel.

As it's technically possible to enable both SME and TSME at the same time,
detect this scenario and notify the user that enabling TSME and SME at the
same time is unnecessary.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Previously the PSP probe routine would fail if both SEV and TEE were
missing.  This is possibly the case for some client parts.

As capabilities can now be accessed from userspace, it may still be
useful to have the PSP driver finish loading so that those capabilities
can be read.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The PSP sets several pre-defined bits in the capabilities
register to indicate that security attributes of the platform.

Export these attributes into userspace for administrators to
confirm platform is properly locked down.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The results of the capability register will be used by future
code at runtime rather than just initialization.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>