- 22 Mar, 2011 40 commits
-
-
Kamil Debski authored
Added documentation for V4L2_PIX_FMT_NV12MT format. This is a YUV 4:2:0 format with macro block size of 64x32 and specific order of macro blocks in the memory. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Sylwester Nawrocki authored
Use pix_mp member of struct v4l2_format to return a format description rather than pix. Also fill in the plane_fmt array. This is a missing bit of conversion to the multiplanar API. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Use pr_debug instead of printk so it is possible to control debug traces at runtime. E.g. to enable debug trace in file fimc-core.c use command: echo -n 'file fimc-core.c +p' > /sys/kernel/debug/dynamic_debug/control or echo -n 'file fimc-core.c -p' > /sys/kernel/debug/dynamic_debug/control to disable. Signed-off-by:
-
Sylwester Nawrocki authored
Allow the MIPI-CSI data alignment to be defined in the board setup as it may be different across various camera sensors. Signed-off-by:
-
Sylwester Nawrocki authored
Add num_clients field to struct s5p_fimc_isp_info to define exactly size of clients array which simplifies a bit the sensors management. Signed-off-by:
-
Sylwester Nawrocki authored
Rework the locking in m2m driver to assure proper operation on SMP systems. When job_abort or stop_streaming was called to immediately shutdown a memory-to-memory transaction video buffers scheduled for processing were never returned to vb2 and v4l2_m2m_job_finish was not called which led to hanging. Correct this and also return the unprocessed buffers to vb2 marking them as erroneous, in case the end of frame interrupt do not occur. Reported-by:
Sewoon Park <seuni.park@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Prevent invalid pointer dereference on error path. Signed-off-by:
-
Sungchun Kang authored
In some cases fimc H/W did not stop although there were no output buffers available. So the capture deactivation interrupt routine is modified and the state of ST_CAPT_RUN is cleared only in the LAST-IRQ call. After LAST-IRQ is generated, H/W pointer will be skipped by 1 frame. (reference by user manual) So, S/W pointer should be increased too. Reviewed-by Jonghun Han <jonghun.han@samsung.com> Signed-off-by:
Sungchun Kang <sungchun.kang@samsung.com> Signed-off-by:
-
Abylay Ospan authored
Two xc5000 tuners connected to same i2c bus. Experiments shows that situation when one tuner is not initialized while other is tuned to channel causes TS errors. Signed-off-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Abylay Ospan authored
CI reset takes several seconds on some CAM, so there is no need to lock mutex all that time. Also we need not to preserve CI's reset bits in CIBUSCTRL register, they are handled automatically by FPGA. Set it to 0 explicitly in order to not reset wrong CAM. Signed-off-by:
-
Abylay Ospan authored
Signed-off-by:
-
Abylay Ospan authored
Signed-off-by:
-
Abylay Ospan authored
It decreases I2C traffic. Signed-off-by:
Igor M. Liplianin <liplianin@netup.ru> Signed-off-by:
-
Mauro Carvalho Chehab authored
cpia2_core.c:529:14: warning: variable 'dir' set but not used [-Wunused-but-set-variable] cpia2_core.c:526:5: warning: variable 'block_index' set but not used [-Wunused-but-set-variable] Signed-off-by: -
Mauro Carvalho Chehab authored
au0828-dvb.c:99:6: warning: variable 'ptr' set but not used [-Wunused-but-set-variable] au0828-video.c:1180:25: warning: variable 'maxheight' set but not used [-Wunused-but-set-variable] au0828-video.c:1180:15: warning: variable 'maxwidth' set but not used [-Wunused-but-set-variable] bttv-input.c:196:16: warning: variable 'current_jiffies' set but not used [-Wunused-but-set-variable] Those variables are not used at all, so just remove them. Cc: Steven Toth <stoth@hauppauge.com> Signed-off-by: -
Hans Verkuil authored
Functions defined in a header should be static inline. This prevents compile warnings like: 'altera_ci_tuner_reset' defined but not used (Actually appeared in the media backwards compatibility build). Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
drivers/media/video/cx88/cx88-alsa.c: In function 'cx88_audio_initdev': drivers/media/video/cx88/cx88-alsa.c:881:20: warning: 'core' may be used uninitialized in this function The compiler doesn't understand that snd_cx88_create fills in the core pointer. So just initialize it to NULL. Signed-off-by:
-
Hans Verkuil authored
drivers/media/radio/wl128x/fmdrv_common.c: In function 'recv_tasklet': drivers/media/radio/wl128x/fmdrv_common.c:274:4: warning: format '%d' expects type 'int', but argument 4 has type 'long unsigned int' The result of sizeof() should be printed with %zu. Signed-off-by:
-
Hans Verkuil authored
drivers/media/video/cx23885/altera-ci.c: In function 'altera_hw_filt_init': drivers/media/video/cx23885/altera-ci.c:671:2: warning: cast from pointer to integer of different size drivers/media/video/cx23885/altera-ci.c: In function 'altera_ci_init': drivers/media/video/cx23885/altera-ci.c:739:2: warning: cast from pointer to integer of different size Use %p instead of 0x%x to print addresses. Signed-off-by:
-
Hans Verkuil authored
drivers/media/dvb/frontends/stv0367.c: In function 'stv0367ter_lock_algo': drivers/media/dvb/frontends/stv0367.c:1315:2: warning: cast from pointer to integer of different size Use %p to print addresses instead of 0x%x. Signed-off-by:
-
Hans Verkuil authored
drivers/media/common/tuners/tuner-xc2028.c: In function 'generic_set_freq': drivers/media/common/tuners/tuner-xc2028.c:936:15: warning: comparison between 'enum tuner_mode' and 'enum v4l2_tuner_type' Argument type was enum tuner_mode, but should have been enum v4l2_tuner_type. Signed-off-by:
-
Sakari Ailus authored
Add documentation on the OMAP 3 ISP driver. Document the subdevs, V4L2 events and private IOCTLs the driver implements Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
David Cohen <dacohen@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
Pick an unused range of ioctls in Documentation/ioctl/ioctl-number.txt and use it for the MEDIA_IOC_* ioctls. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Replace the omap_pm_set_min_bus_tput() with a callback to board code. This makes the omap3isp driver compilable as a module, and lets board code manage OMAP PM details depending on board requirements. Signed-off-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by:
-
Laurent Pinchart authored
Add the OMAP3 ISP driver to the kernel build system. Signed-off-by:
-
David Cohen authored
The OMAP3 ISP statistics entities compute histogram and H3A statistics information from capture images. Signed-off-by:
Vimarsh Zutshi <vimarsh.zutshi@gmail.com> Signed-off-by:
Tuukka Toivonen <tuukkat76@gmail.com> Signed-off-by:
Sergio Aguirre <saaguirre@ti.com> Signed-off-by:
Antti Koskipaa <akoskipa@gmail.com> Signed-off-by:
Ivan T. Ivanov <iivanov@mm-sol.com> Signed-off-by:
RaniSuneela <r-m@ti.com> Signed-off-by:
Atanas Filipov <afilipov@mm-sol.com> Signed-off-by:
Gjorgji Rosikopulos <grosikopulos@mm-sol.com> Signed-off-by:
Hiroshi DOYU <Hiroshi.DOYU@nokia.com> Signed-off-by:
Nayden Kanchev <nkanchev@mm-sol.com> Signed-off-by:
Phil Carmody <ext-phil.2.carmody@nokia.com> Signed-off-by:
Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by:
Dominic Curran <dcurran@ti.com> Signed-off-by:
Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> Signed-off-by:
Pallavi Kulkarni <p-kulkarni@ti.com> Signed-off-by:
Vaibhav Hiremath <hvaibhav@ti.com> Acked-by:
-
Laurent Pinchart authored
The OMAP3 ISP CCDC, preview engine and resizer entities perform image processing and scaling. Signed-off-by:
-
Laurent Pinchart authored
The OMAP3 ISP CCP2 and CSI2 receivers provide an interface to connect serial MIPI sensors to the device. Signed-off-by:
-
Laurent Pinchart authored
The OMAP3 ISP video devices and buffers queue modules implement the V4L2 API on all the ISP video nodes. Signed-off-by:
-
Sakari Ailus authored
The Image Signal Processor provides the system interface and the processing capability to connect RAW or YUV image-sensor modules to the OMAP3. Signed-off-by:
-
Laurent Pinchart authored
Instead of returning an error when receiving an ioctl call with an unsupported command, forward the call to the subdev core::ioctl handler. Signed-off-by:
-
Sergio Aguirre authored
Make sure the kernel can be compiled with both OMAP2 and OMAP3 camera support linked in, and give public symbols proper omap2/omap3 prefixes. Signed-off-by:
Tony Lindgren <tony@atomide.com> Acked-by:
-
Laurent Pinchart authored
The omap3isp platform device requires platform data. Instead of registering the device in omap2_init_devices(), export an omap3_init_camera() function to fill the device structure with the platform data pointer and register the device. Signed-off-by:
-
Sergio Aguirre authored
The ISP CBUFF module isn't use, its resource isn't needed. Signed-off-by:
-
Tuukka Toivonen authored
Add new/changed base address definitions and resources for OMAP3630 ISP. The OMAP3430 CSI2PHY block is same as the OMAP3630 CSIPHY2 block. But the later name is chosen as it gives more symmetry to the names. Signed-off-by:
-
Laurent Pinchart authored
Add FCCs for the following pixel formats: - V4L2_PIX_FMT_SBGGR12 - V4L2_PIX_FMT_SGBRG12 - V4L2_PIX_FMT_SGRBG12 - V4L2_PIX_FMT_SRGGB12 Signed-off-by:
-
Laurent Pinchart authored
Add codes and documentation for the following media bus formats: - V4L2_MBUS_FMT_SGBRG12_1X12 - V4L2_MBUS_FMT_SGRBG12_1X12 - V4L2_MBUS_FMT_SRGGB12_1X12 Signed-off-by:
-
Laurent Pinchart authored
This adds following formats: - V4L2_MBUS_FMT_SRGGB10_1X10 - V4L2_MBUS_FMT_SGBRG10_1X10 - V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8 - V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8 - V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8 Signed-off-by:
-
Laurent Pinchart authored
Add the following media bus format code definitions: - V4L2_MBUS_FMT_SGRBG10_1X10 for 10-bit GRBG Bayer - V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8 for 10-bit DPCM compressed GRBG Bayer - V4L2_MBUS_FMT_YUYV16_1X16 for 8-bit YUYV on 16-bit bus - V4L2_MBUS_FMT_UYVY16_1X16 for 8-bit UYVY on 16-bit bus - V4L2_MBUS_FMT_YVYU16_1X16 for 8-bit YVYU on 16-bit bus - V4L2_MBUS_FMT_VYUY16_1X16 for 8-bit VYUY on 16-bit bus Signed-off-by:
-
Laurent Pinchart authored
Some buggy sensors generate corrupt frames when the stream is started. This new operation return the number of corrupt frames to skip when starting the stream. Signed-off-by:
-
