- 12 Jan, 2022 3 commits
-
-
Jagan Teki authored
This reverts commit 92e794fa. It is merged by accident, the actual patch series on this bridge conversion is still under review. Revert this as it breaks the exynos DSI. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220111184347.502471-1-jagan@amarulasolutions.comReviewed-by:
-
Thomas Zimmermann authored
Set the source-buffer address after mapping the buffer into the kernel's address space. Makes MIPI DBI helpers work again. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Fixes: c47160d8 ("drm/mipi-dbi: Remove dependency on GEM CMA helper library") Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Reported-by:
-
Minghao Chi authored
Return value directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220112082524.667552-1-chi.minghao@zte.com.cn
-
- 11 Jan, 2022 9 commits
-
-
Daniel Vetter authored
Otherwise it's really hard to link to that, which I realized when I wanted to link to the property definitions for a question on irc. Fix it. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Fixes: e2d7fc20 ("drm/writeback: wire drm_writeback.h to kernel-doc") Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220111202714.1128406-1-daniel.vetter@ffwll.ch
-
Jiasheng Jiang authored
Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. Also, we can create a variable for the mask to solve the alignment issue. Fixes: 334dd38a ("drm/v3d: Set dma_mask as well as coherent_dma_mask") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220110013807.4105270-1-jiasheng@iscas.ac.cn
-
Jani Nikula authored
Take bit 7 into account when reading sink count from DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220104184857.784563-2-jani.nikula@intel.com
-
Jani Nikula authored
DP_SINK_COUNT_ESI and DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 have the same contents as DP_SINK_COUNT and DP_DEVICE_SERVICE_IRQ_VECTOR, respectively. Signed-off-by:
-
Maxime Ripard authored
Once the call to drm_fb_helper_remove_conflicting_framebuffers() has been made, simplefb has been unregistered and the KMS driver is entirely in charge of the display. Thus, we can notify the firmware it can free whatever resource it was using to maintain simplefb functional. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Acked-by:
-
Maxime Ripard authored
The bind hooks will modify their controller registers, so simplefb is going to be unusable anyway. Let's avoid any transient state where it could still be in the system but no longer functionnal. Acked-by:
Nicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by:
-
Maxime Ripard authored
If we have nomodeset on the kernel command line we should have the firmware framebuffer driver kept as is and not try to load the full-blown KMS driver. In this case, let's just register the v3d driver. Signed-off-by:
-
Maxime Ripard authored
The RPI_FIRMWARE_NOTIFY_DISPLAY_DONE firmware call allows to tell the firmware the kernel is in charge of the display now and the firmware can free whatever resources it was using. Acked-by:
-
Lucas De Marchi authored
Fix typo: separate arguments with comma rather than dot. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
- 10 Jan, 2022 8 commits
-
-
Alyssa Rosenzweig authored
Update a comment stating create_bo took no flags, since it now takes a bit mask of optional flags NOEXEC and HEAP. Signed-off-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by:
Steven Price <steven.price@arm.com> Signed-off-by:
-
Rajat Jain authored
Add a static entry in the x86 table, to detect and wait for privacy-screen on some ChromeOS platforms. Please note that this means that if CONFIG_CHROMEOS_PRIVACY_SCREEN is enabled, and if "GOOG0010" device is found in ACPI, then the i915 probe shall return EPROBE_DEFER until a platform driver actually registers the privacy-screen: https://hansdegoede.livejournal.com/25948.htmlSigned-off-by:
Rajat Jain <rajatja@google.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Benson Leung <bleung@chromium.org> Signed-off-by:
-
Rajat Jain authored
This adds the ACPI driver for the ChromeOS privacy screen that is present on some chromeos devices. Note that ideally, we'd want this privacy screen driver to be probed BEFORE the drm probe in order to avoid a drm probe deferral: https://hansdegoede.livejournal.com/25948.html In practise, I found that ACPI drivers are bound to their devices AFTER the drm probe on chromebooks. So on chromebooks with privacy-screen, this patch along with the other one in this series results in a probe deferral of about 250ms for i915 driver. However, it did not result in any user noticeable delay of splash screen in my personal experience. In future if this probe deferral turns out to be an issue, we can consider turning this ACPI driver into something that is probed earlier than the drm drivers. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by:
-
Rajat Jain authored
Allow a privacy screen provider to stash its private data pointer in the drm_privacy_screen, and update the drm_privacy_screen_register() call to accept that. Also introduce a *_get_drvdata() so that it can retrieved back when needed. This also touches the IBM Thinkpad platform driver, the only user of privacy screen today, to pass NULL for now to the updated API. Signed-off-by:
-
Jagan Teki authored
Existing HPD enablement logic is not compatible with ADV7535 bridge, thus any runtime plug-in of HDMI cable is not working on these bridge designs. Unlike other ADV7511 family of bridges, the ADV7535 require HPD_OVERRIDE bit to set and reset for proper handling of HPD functionality. Fix it. Fixes: 8501fe4b ("drm: bridge: adv7511: Add support for ADV7535") Signed-off-by:
-
Xin Ji authored
Provide .get_eld interface in hdmi_codec_ops for hdmi-codec driver. Reviewed-by:
Xin Ji <xji@analogixsemi.com> Signed-off-by:
-
Xin Ji authored
This patch provides HDCP setting interface for userspace to dynamic enable/disable HDCP function. Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
-
Xin Ji authored
Add bridge helper atomic conversion. Reviewed-by:
-
- 09 Jan, 2022 3 commits
-
-
José Expósito authored
Remove the task from the TODO list. Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Reviewed-by:
-
José Expósito authored
Create 8 overlay planes instead of 1 when the "enable_overlay" module parameter is set. The following igt-gpu-tools tests were executed without finding regressions. Notice than the numbers are identical: | master branch | this patch | | SUCCESS | SKIP | FAIL | SUCCESS | SKIP | FAIL | kms_atomic | 10 | 02 | 00 | 10 | 02 | 00 | kms_plane_cursor | 09 | 45 | 00 | 09 | 45 | 00 | kms_plane_multiple | 01 | 23 | 00 | 01 | 23 | 00 | kms_writeback | 04 | 00 | 00 | 04 | 00 | 00 | Signed-off-by: -
José Expósito authored
Move the logic to create an overlay plane to its own function. Refactor, no functional changes. Signed-off-by:
-
- 07 Jan, 2022 1 commit
-
-
Jiri Vanek authored
Fixed wrong register shift for single/dual link LVDS output. Tested-by:
Jiri Vanek <jirivanek1@gmail.com> Signed-off-by:
Vinay Simha BN <simhavcs@gmail.com> Signed-off-by:
-
- 06 Jan, 2022 3 commits
-
-
Ivaylo Dimitrov authored
Currently omapdrm driver does not initialize dma_buf_export_info resv member, which leads to a new dma_resv being allocated and attached to the exported dma_buf. This leads to the issue that fences created on dma_buf objects imported by other drivers are ignored by omapdrm, as only fences in gem object resv are waited on. This leads to various issues like displaying incomplete frames. Fix that by initializing dma_buf resv to the resv of the gem object being exported. Signed-off-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by:
Merlijn Wajer <merlijn@wizzup.org> Tested-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/1641397018-29872-1-git-send-email-ivo.g.dimitrov.75@gmail.com
-
KuoHsiang Chou authored
Enable the supporting of wide sscreen on AST2600, so that the resolution of 16:9 and 16:10 are able to be selected on Display Settings. Signed-off-by:
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by:
-
yangcong authored
Optimize two problems a)Turn off low voltage detection register.During the esd test, the low-voltage detection ic may be triggered to enter the slpin state, so a black screen occurs on the panel. b)Optimize CMD2 page1 gamma. Signed-off-by:
yangcong <yangcong5@huaqin.corp-partner.google.com> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 05 Jan, 2022 5 commits
-
-
José Expósito authored
Fix minor typo: "valdiate" -> "validate". Signed-off-by:
Simon Ser <contact@emersion.fr> Signed-off-by:
-
José Expósito authored
The documentation for "drm_plane_funcs.format_mod_supported" reads: This *optional* hook is used for the DRM to determine if the given format/modifier combination is valid for the plane. This allows the DRM to generate the correct format bitmask (which formats apply to which modifier), and to validate modifiers at atomic_check time. *If not present*, then any modifier in the plane's modifier list is allowed with any of the plane's formats. However, where the function is not present, an invalid IN_FORMATS blob property with modifiers but no formats is exposed to user-space. This breaks the latest Weston [1]. For testing purposes, I extracted the affected code to a standalone program [2]. Make "create_in_format_blob" behave as documented. [1] https://gitlab.freedesktop.org/wayland/weston/-/blob/9.0/libweston/backend-drm/kms.c#L431 [2] https://github.com/JoseExposito/drm-sandbox/blob/main/in_formats.cSigned-off-by:
-
Miaoqian Lin authored
The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. Fixes: 44cfc623 ("drm/bridge: Add NWL MIPI DSI host controller support") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Miaoqian Lin authored
If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable(). Add missing pm_runtime_disable() for __dw_mipi_dsi_probe. Fixes: 46fc5154 ("drm/bridge/synopsys: Add MIPI DSI host controller bridge") Signed-off-by:
-
AngeloGioacchino Del Regno authored
Entering suspend while the display attached to this bridge is still on makes the resume sequence to resume the bridge first, display last: when this happens, we get a timeout while resuming the bridge, as its MCU will get stuck due to the display being unpowered. On the other hand, on mt8173-elm, closing the lid makes the display to get powered off first, bridge last, so at resume time the sequence is swapped (compared to the first example) and everything just works as expected. Add a stateless device link to the DRM device that this bridge belongs to, ensuring a correct resume sequence and solving the unability to correctly resume bridge operation in the first mentioned example. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
- 04 Jan, 2022 8 commits
-
-
Jagan Teki authored
Get the display mode settings via mode_set bridge function instead of explicitly de-reference. Signed-off-by:
-
Jagan Teki authored
Some display panels would come up with a non-DSI output, those can have an option to connect the DSI host by means of interface bridge converter. This DSI to non-DSI interface bridge converter would requires DSI Host to handle drm bridge functionalities in order to DSI Host to Interface bridge. This patch convert the existing to a drm bridge driver with a built-in encoder support for compatibility with existing component drivers. Signed-off-by:
-
Miaoqian Lin authored
Since i2c_new_client_device() function return error pointers. The i2c_new_dummy_device() function does not return NULL, It returns error pointers too. Using IS_ERR() to check the return value to fix this. Fixes: 8bdfc5da("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by:
-
Xin Ji authored
As GPIO probe function "devm_gpiod_get_optional()" may return error code, driver should identify GPIO desc as NULL to avoid crash. Acked-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
-
Yannick Fertre authored
Add support of new hardware version 0x40100. Signed-off-by:
Yannick Fertre <yannick.fertre@foss.st.com> Reviewed-by:
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Tested-by:
Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by:
-
Yannick Fertre authored
In case of using simplefb or another conflicting framebuffer, call drm_aperture_remove_framebuffers() to remove memory allocated. Signed-off-by:
-
Miaoqian Lin authored
rc_dev is allocated by rc_allocate_device(), and doesn't assigned to ctx->rc_dev before calling rc_free_device(ctx->rc_dev). So it should call rc_free_device(rc_dev); Fixes: e25f1f7c ("drm/bridge/sii8620: add remote control support") Signed-off-by:
-
Jagan Teki authored
Get the display mode settings via mode_set bridge function instead of explicitly de-reference. Signed-off-by:
-
