Due to some recent changes in
drm_helper_probe_single_connector_modes_merge_bits(), old custom modes
were not being pruned properly. In current kernels,
drm_mode_validate_basic() is called to sanity-check each mode in the
list. If the sanity-check passes, the mode's status gets set to to
MODE_OK. In older kernels this check was not done, so old custom modes
would still have a status of MODE_UNVERIFIED at this point, and would
therefore be pruned later in the function.

As a result of this new behavior, the list of modes for a device always
includes every custom mode ever configured for the device, with the
largest one listed first. Since desktop environments usually choose the
first preferred mode when a hotplug event is emitted, this had the
result of making it very difficult for the user to reduce the size of
the display.

The qxl driver did implement the mode_valid connector function, but it
was empty. In order to restore the old behavior where old custom modes
are pruned, we implement a proper mode_valid function for the qxl
driver. This function now checks each mode against the last configured
custom mode and the list of standard modes. If the mode doesn't match
any of these, its status is set to MODE_BAD so that it will be pruned as
expected.
Signed-off-by: Jonathon Jongsma <jjongsma@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

A few more fixes for amdgpu from the last few days:
- Fix several copy paste typos
- Resume from suspend fixes for VCE
- Fix the GPU scheduler warning in kfifo_out
- Re-enable GPUVM fault interrupts which were inadvertently disabled
- GPUVM page table hang fix when paging

* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: rename gmc_v8_0_init_compute_vmid
  drm/amdgpu: fix vce3 instance handling
  drm/amdgpu: remove ib test for the second VCE Ring
  drm/amdgpu: properly enable VM fault interrupts
  drm/amdgpu: fix warning in scheduler
  drm/amdgpu: fix buffer placement under memory pressure
  drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
  drm/amdgpu: fix typo in dce11 watermark setup
  drm/amdgpu: fix typo in dce10 watermark setup
  drm/amdgpu: use top down allocation for non-CPU accessible vram
  drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)

It should be gfx_v8_0_init_compute_vmid since it's
part of the gfx block.
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Need to properly handle the instances for the idle
checks and soft reset.
Acked-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

it seems the VCE ring 1 ib test not reliable, remove it for now.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-and-Reviewed-by: Sonny Jiang <sonny.jiang@amd.com>

This fixes not printing VM faults.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This should never happen so warn when the count does
not equal the expected size.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-next-fixes-2015-09-02' of git://anongit.freedesktop.org/drm-intel into drm-next

i915 display fixes headed for v4.3. Mostly SKL, but some regression
fixes too.

* tag 'drm-intel-next-fixes-2015-09-02' of git://anongit.freedesktop.org/drm-intel:
  i915: Set ddi_pll_sel in DP MST path
  drm/i915: Don't use link_bw for PLL setup
  drm/i915: Preserve SSC earlier
  drm/i915/skl: Adding DDI_E power well domain
  drm/i915: eDP can be present on DDI-E
  drm/i915/skl: Enable DDI-E
  drm/i915: Enable HDMI on DDI-E
  drm/i915: apply the PCI_D0/D3 hibernation workaround everywhere on pre GEN6
  drm/i915: Check DP link status on long hpd too
  drm/i915: set CDCLK if DPLL0 enabled during resuming from S3

Merge branch 'drm-rockchip-2015-08-26' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

Here are some fixes and some new features for rockchip drm,
    tested on popmetal rk3288 board, can you land them?

* 'drm-rockchip-2015-08-26' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: vop: support plane scale
  drm/rockchip: vop: restore vop registers when resume
  drm/rockchip: vop: Default enable win2/3 area0 bit
  drm/rockchip: vop: Add yuv plane support
  drm/rockchip: vop: Fix window dest start point
  drm/rockchip: vop: Fix virtual stride calculation

Pull request of 2015-09-01

A single commit. Workaround for
https://bugzilla.redhat.com/show_bug.cgi?id=1227193

* tag 'vmwgfx-next-15-09-01' of git://people.freedesktop.org/~thomash/linux:
  drm/vmwgfx: Allow dropped masters render-node like access on legacy nodes v2

Merge branch 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

   This is a last pull request, which includes two g2d patches
   I missed, and more cleanup series of Exynos drm driver.

   The cleanup series makes Exynos drm driver more simple,
   and removes unnecessary codes, and considers multiple plane format
   of framebuffer. I hope this not to be late.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: remove buf_cnt from struct exynos_drm_fb
  drm/exynos: remove exynos_drm_fb_get_buf_cnt()
  drm/exynos: cleanup exynos_user_fb_create()
  drm/exynos: update exynos_drm_framebuffer_init() for multiple buffers
  drm/exynos: cleanup to get gem object for fb
  drm/exynos: update fb_info via only one function
  drm/exynos: cleanup exynos_drm_fbdev_update()
  drm/exynos: s/exynos_gem_obj/obj in exynos_drm_fbdev.c
  drm/exynos: remove exynos_drm_fb_set_buf_cnt()
  drm/exynos: remove superfluous checks in g2d_check_reg_offset()
  drm/exynos: fix size check in g2d_check_buf_desc_is_valid()

More fixes for radeon and amdgpu for 4.3:
- Send full DP aux address fixes for radeon and amdgpu
- Fix an HDMI display regression for pre-DCE5 parts
- UVD suspend fixes for amdgpu
- Add an rs480 suspend quirk
- Fix bo reserve handling in amdgpu GEM_OP ioctl
- GPU scheduler fixes
- SDMA optimizations
- MEC fix for Fiji

* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
  drm/amdgpu: set MEC doorbell range for Fiji
  drm/amdgpu: implement burst NOP for SDMA
  drm/amdgpu: add insert_nop ring func and default implementation
  drm/amdgpu: add amdgpu_get_sdma_instance helper function
  drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
  drm/amdgpu: add burst_nop flag for sdma
  drm/amdgpu: add count field for the SDMA NOP packet v2
  drm/amdgpu: use PT for VM sync on unmap
  drm/amdgpu: make wait_event uninterruptible in push_job
  drm/amdgpu: fix amdgpu_bo_unreserve order in GEM_OP IOCTL v2
  drm/amdgpu: partially revert "modify amdgpu_fence_wait_any() to amdgpu_fence_wait_multiple()" v2
  Add radeon suspend/resume quirk for HP Compaq dc5750.
  drm/amdgpu: re-work sync_resv
  drm/amdgpu/atom: Send out the full AUX address
  drm/radeon/native: Send out the full AUX address
  drm/radeon/atom: Send out the full AUX address
  drm/amdgpu: use IB for fill_buffer instead of direct command
  drm/amdgpu: stop trying to suspend UVD sessions v2
  drm/amdgpu: add scheduler dependency callback v2
  drm/amdgpu: let the scheduler work more with jobs v2
  ...

Some buffers (UVD/VM page tables) must be placed in VRAM,
but the byte restriction for moving buffers didn't took this
into account.

Port of radeon commit 4b095566.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>

The logic was reversed.  This feature is not enabled
at the moment, but fix it now for the future.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Using the wrong watermwark value for the secondary
watermark.  Copy paste typo.  Noticed by Mykola.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Using the wrong watermwark value for the secondary
watermark.  Copy paste typo.  Noticed by Mykola.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Should help avoid fragmentation of vram due to CPU access
requirements.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

For kernel driver BOs, be explicit about whether we need
vram access up front.  This avoids unecessary migrations and
avoids using visible vram for buffers were it's not needed.

v2: line wrap fixes
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Customize the insert_nop func for SDMA rings, and use burst NOP for
ring/IB submissions in other places as well
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

The insert_nop function is added to amdgpu_ring_funcs structure as
well as the default implementation
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This function is added to map the ring to sdma instance
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Remove the hardcoded usage
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

The burst NOP is supported for SDMA when feature_version is >= 20.
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

This is added to support the burst NOP

v2: squash the typo fix
Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Instead of the array which is used for ID management.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

with interruptible, the push_job maybe return -ERESTARTSYS,
then result in push_job error.

E.g. bug trace:
[  181.618860] *****amdgpu_copy_buffer:fence->seq:0x0000000048d8758b, contxt:1207959552, ref:683967304, r:-512
[  181.618929] BUG: unable to handle kernel paging request at ffffffff811aa266
[  181.625887] IP: [<ffffffff81548ffc>] reservation_object_add_excl_fence+0x3c/0x120
...
[  181.859767]  [<ffffffff811aa266>] ? unmap_mapping_range+0x66/0x110
[  181.865928]  [<ffffffffc0608ac1>] ttm_bo_move_accel_cleanup+0x41/0x3c0 [ttm]
[  181.872971]  [<ffffffffc062d382>] amdgpu_move_blit.isra.18+0x122/0x150 [amdgpu]
[  181.880254]  [<ffffffff811aa266>] ? unmap_mapping_range+0x66/0x110
[  181.886420]  [<ffffffffc062d709>] amdgpu_bo_move+0xa9/0x200 [amdgpu]
[  181.892753]  [<ffffffffc0606e8d>] ttm_bo_handle_move_mem+0x26d/0x5c0 [ttm]
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

No copy_(to|from)_user while BO is reserved.

v2: handle default path as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>

That isn't used any more.

v2: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

With the radeon driver loaded the HP Compaq dc5750
Small Form Factor machine fails to resume from suspend.
Adding a quirk similar to other devices avoids
the problem and the system resumes properly.
Signed-off-by: Jeffery Miller <jmiller@neverware.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

sync_resv is to handle both amdgpu_fence and sched_fence.
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian K?nig <christian.koenig@amd.com>

AUX addresses are 20 bits long. Send out the entire address instead of
just the low 16 bits.

Port of:
drm/radeon/atom: Send out the full AUX address
to amdgpu
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Looking other drm drivers, there is no the restriction that framebuffer
has only one buffer in .create_handle() callback. They use just first
buffer.

If this limitation is removed, there is no reason keeping buffer count
for framebuffer, so we can remove buf_cnt from struct exynos_drm_fb.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

We can get buffer count of framebuffer using drm_format_num_planes(), so
keeping exynos_drm_fb_get_buf_cnt() is unnecessary.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Using exynos_drm_framebuffer_init(), redundant codes can be removed.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This modifies exynos_drm_framebuffer_init() to be possible to support
multiple buffers. Then it can be used by exynos_user_fb_create().
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Current codes get first gem object and then again get remain gem
objects. They can be unified to one routine.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

This patch moves codes to update fb_info into exynos_drm_fbdev_update(),
so fb_info is updated via only one function.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

It can get exynos_gem object via function argument, so no need to call
exynos_drm_fb_gem_obj() in exynos_drm_fbdev_update.

It also can get struct drm_framebuffer *fb via helper->fb, so can remove
a function argument for it.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

The variable name "exynos_gem_obj" is too long, so some lines exceed 80
characters. It's simple to use "obj" instead of "exynos_gem_obj".
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>