Since Tegra now compile tests on other platforms the kernel test robot
started to complain that this here is not pulled in under all
conditions.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202304050946.yGGTKkcr-lkp@intel.com/Signed-off-by: Thierry Reding <treding@nvidia.com>

In cases where the DSI module is left on by the bootloader
some panels may fail to initialize if the enable register is not cleared
before the panel's initialization sequence is sent, so clear it if that
is the case.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Return dev_err_probe() directly, because the return value of
dev_err_probe() is the appropriate error code, and it can
reduce code size, simplify the code.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

When possible use dev_err_probe help to properly deal with the
PROBE_DEFER error, the benefit is that DEFER issue will be logged
in the devices_deferred debugfs file.
And using dev_err_probe() can reduce code size, the error value
gets printed.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

A call to platform_get_irq() already prints an error on failure within
its own implementation. So printing another error based on its return
value in the caller is redundant and should be removed. The clean up
also makes if condition block braces unnecessary. Remove that as well.

Issue identified using platform_get_irq.cocci coccicheck script.
Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/tegra/dc.c: In function ‘tegra_crtc_calculate_memory_bandwidth’:
 drivers/gpu/drm/tegra/dc.c:2384:38: warning: variable ‘old_state’ set but not used [-Wunused-but-set-variable]

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This compile tests on x86 just perfectly fine.

v2: fix missing include complained by kernel test robot
Signed-off-by: Christian König <christian.koenig@amd.com>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Jonathan Hunter <jonathanh@nvidia.com>
CC: linux-tegra@vger.kernel.org
Signed-off-by: Thierry Reding <treding@nvidia.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This function returned zero unconditionally. Make it return no value and
simplify all callers accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The device names allocated by dev_set_name() need be freed
before module unloading, but they can not be freed because
the kobject's refcount which was set in device_initialize()
has not be decreased to 0.

As comment of device_add() says, if it fails, use only
put_device() drop the refcount, then the name will be
freed in kobejct_cleanup().

device_del() and put_device() can be replaced with
device_unregister(), so call it to unregister the added
successfully devices, and just call put_device() to the
not added device.

Add a release() function to device to avoid null release()
function WARNING in device_release(), it's empty, because
the context devices are freed together in
host1x_memory_context_list_free().

Fixes: 8aa5bcb6 ("gpu: host1x: Add context device management code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

If context device has no IOMMU, the 'cdl->devs' is freed in
error path, but host1x_memory_context_list_init() doesn't
return an error code, so the module can be loaded successfully,
when it's unloading, the host1x_memory_context_list_free() is
called in host1x_remove(), it will cause double free. Set the
'cdl->devs' to NULL after freeing it to avoid double free.

Fixes: 8aa5bcb6 ("gpu: host1x: Add context device management code")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Thierry Reding <treding@nvidia.com>

dma_fence_wait_timeout (along with a host of other jiffies-based
timeouting functions) returns zero both in case of timeout and when
the wait completes during the last jiffy before timeout. As such,
we can't rely on it to distinguish between success and timeout.

To prevent confusing callers by returning -EAGAIN before the timeout
period has elapsed, check if the fence got signaled again after
the wait.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

This function returned zero unconditionally. Make it return no value and
simplify all callers accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Mikko has been involved as the primary author of the host1x driver and
has volunteered to help out with maintenance.
Signed-off-by: Thierry Reding <treding@nvidia.com>

Pull tracing fixes from Steven Rostedt:

 - Fix setting affinity of hwlat threads in containers

   Using sched_set_affinity() has unwanted side effects when being
   called within a container. Use set_cpus_allowed_ptr() instead

 - Fix per cpu thread management of the hwlat tracer:
    - Do not start per_cpu threads if one is already running for the CPU
    - When starting per_cpu threads, do not clear the kthread variable
      as it may already be set to running per cpu threads

 - Fix return value for test_gen_kprobe_cmd()

   On error the return value was overwritten by being set to the result
   of the call from kprobe_event_delete(), which would likely succeed,
   and thus have the function return success

 - Fix splice() reads from the trace file that was broken by commit
   36e2c742 ("fs: don't allow splice read/write without explicit
   ops")

 - Remove obsolete and confusing comment in ring_buffer.c

   The original design of the ring buffer used struct page flags for
   tricks to optimize, which was shortly removed due to them being
   tricks. But a comment for those tricks remained

 - Set local functions and variables to static

* tag 'trace-v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
  ring-buffer: remove obsolete comment for free_buffer_page()
  tracing: Make splice_read available again
  ftrace: Set direct_ops storage-class-specifier to static
  trace/hwlat: Do not start per-cpu thread if it is already running
  trace/hwlat: Do not wipe the contents of per-cpu thread data
  tracing/osnoise: set several trace_osnoise.c variables storage-class-specifier to static
  tracing: Fix wrong return in kprobe_event_gen_test.c

There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.

Test case:

  # cd /sys/kernel/tracing
  # echo 0 > tracing_on
  # echo round-robin > hwlat_detector/mode
  # echo hwlat > current_tracer
  # unshare --fork --pid bash -c 'echo 1 > tracing_on'
  # dmesg -c

Actual behavior:

[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none

Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 0330f7aa ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The comment refers to mm/slob.c which is being removed. It comes from
commit ed56829c ("ring_buffer: reset buffer page when freeing") and
according to Steven the borrowed code was a page mapcount and mapping
reset, which was later removed by commit e4c2ce82 ("ring_buffer:
allocate buffer page pointer"). Thus the comment is not accurate anyway,
remove it.

Link: https://lore.kernel.org/linux-trace-kernel/20230315142446.27040-1-vbabka@suse.cz

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reported-by: Mike Rapoport <mike.rapoport@gmail.com>
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fixes: e4c2ce82 ("ring_buffer: allocate buffer page pointer")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Since the commit 36e2c742 ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.

This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.

Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com

Cc: stable@vger.kernel.org
Fixes: 36e2c742 ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull tty/serial driver fixes from Greg KH:
 "Here are some small tty and serial driver fixes for 6.3-rc3 to resolve
  some reported issues.

  They include:

   - 8250 driver Kconfig issue pointed out by you that showed up in -rc1

   - qcom-geni serial driver fixes

   - various 8250 driver fixes for reported problems

   - fsl_lpuart driver fixes

   - serdev fix for regression in -rc1

   - vt.c bugfix

  All have been in linux-next for over a week with no reported problems"

* tag 'tty-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: vt: protect KD_FONT_OP_GET_TALL from unbound access
  serial: qcom-geni: drop bogus uart_write_wakeup()
  serial: qcom-geni: fix mapping of empty DMA buffer
  serial: qcom-geni: fix DMA mapping leak on shutdown
  serial: qcom-geni: fix console shutdown hang
  serdev: Set fwnode for serdev devices
  tty: serial: fsl_lpuart: fix race on RX DMA shutdown
  serial: 8250_pci1xxxx: Disable SERIAL_8250_PCI1XXXX config by default
  serial: 8250_fsl: fix handle_irq locking
  serial: 8250_em: Fix UART port type
  serial: 8250: ASPEED_VUART: select REGMAP instead of depending on it
  tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted
  Revert "tty: serial: fsl_lpuart: adjust SERIAL_FSL_LPUART_CONSOLE config dependency"

Pull char/misc driver fixes from Greg KH:
 "Here are a few small char/misc/other driver subsystem patches to
  resolve reported problems for 6.3-rc3.

  Included in here are:

   - Interconnect driver fixes for reported problems

   - Memory driver fixes for reported problems

   - nvmem core fix

   - firmware driver fix for reported problem

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (23 commits)
  memory: tegra30-emc: fix interconnect registration race
  memory: tegra20-emc: fix interconnect registration race
  memory: tegra124-emc: fix interconnect registration race
  memory: tegra: fix interconnect registration race
  interconnect: exynos: drop redundant link destroy
  interconnect: exynos: fix registration race
  interconnect: exynos: fix node leak in probe PM QoS error path
  interconnect: qcom: msm8974: fix registration race
  interconnect: qcom: rpmh: fix registration race
  interconnect: qcom: rpmh: fix probe child-node error handling
  interconnect: qcom: rpm: fix registration race
  nvmem: core: return -ENOENT if nvmem cell is not found
  firmware: xilinx: don't make a sleepable memory allocation from an atomic context
  interconnect: qcom: rpm: fix probe child-node error handling
  interconnect: qcom: osm-l3: fix registration race
  interconnect: imx: fix registration race
  interconnect: fix provider registration API
  interconnect: fix icc_provider_del() error handling
  interconnect: fix mem leak when freeing nodes
  interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT
  ...

Pull RAS fix from Borislav Petkov:

 - Flush out logged errors immediately after MCA banks configuration
   changes over sysfs have been done instead of waiting until something
   else triggers the workqueue later - another error or the polling
   interval cycle is reached

* tag 'ras_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Make sure logged MCEs are processed after sysfs update

Pull perf fixes from Borislav Petkov:

 - Check whether sibling events have been deactivated before adding them
   to groups

 - Update the proper event time tracking variable depending on the event
   type

 - Fix a memory overwrite issue due to using the wrong function argument
   when outputting perf events

* tag 'perf_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix check before add_event_to_groups() in perf_group_detach()
  perf: fix perf_event_context->time
  perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output

Pull x86 fixes from Borislav Petkov:
 "There's a little bit more 'movement' in there for my taste but it
  needs to happen and should make the code better after it.

   - Check cmdline_find_option()'s return value before further
     processing

   - Clear temporary storage in the resctrl code to prevent access to an
     unexistent MSR

   - Add a simple throttling mechanism to protect the hypervisor from
     potentially malicious SEV guests issuing requests in rapid
     succession.

     In order to not jeopardize the sanity of everyone involved in
     maintaining this code, the request issuing side has received a
     cleanup, split in more or less trivial, small and digestible
     pieces. Otherwise, the code was threatening to become an
     unmaintainable mess.

     Therefore, that cleanup is marked indirectly also for stable so
     that there's no differences between the upstream code and the
     stable variant when it comes down to backporting more there"

* tag 'x86_urgent_for_v6.3_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix use of uninitialized buffer in sme_enable()
  x86/resctrl: Clear staged_config[] before and after it is used
  virt/coco/sev-guest: Add throttling awareness
  virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case
  virt/coco/sev-guest: Do some code style cleanups
  virt/coco/sev-guest: Carve out the request issuing logic into a helper
  virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()
  virt/coco/sev-guest: Simplify extended guest request handling
  virt/coco/sev-guest: Check SEV_SNP attribute at probe time

Pull ext4 fix from Ted Ts'o:
 "Fix a double unlock bug on an error path in ext4, found by smatch and
  syzkaller"

* tag 'ext4_for_linus_urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix possible double unlock when moving a directory

smatch reports this warning
kernel/trace/ftrace.c:2594:19: warning:
  symbol 'direct_ops' was not declared. Should it be static?

The variable direct_ops is only used in ftrace.c, so it should be static

Link: https://lore.kernel.org/linux-trace-kernel/20230311135113.711824-1-trix@redhat.comSigned-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The hwlatd tracer will end up starting multiple per-cpu threads with
the following script:

    #!/bin/sh
    cd /sys/kernel/debug/tracing
    echo 0 > tracing_on
    echo hwlat > current_tracer
    echo per-cpu > hwlat_detector/mode
    echo 100000 > hwlat_detector/width
    echo 200000 > hwlat_detector/window
    echo 1 > tracing_on

To fix the issue, check if the hwlatd thread for the cpu is already
running, before starting a new one. Along with the previous patch, this
avoids running multiple instances of the same CPU thread on the system.

Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-3-tero.kristo@linux.intel.com

Cc: stable@vger.kernel.org
Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Do not wipe the contents of the per-cpu kthread data when starting the
tracer, as this will completely forget about already running instances
and can later start new additional per-cpu threads.

Link: https://lore.kernel.org/all/20230302113654.2984709-1-tero.kristo@linux.intel.com/
Link: https://lkml.kernel.org/r/20230310100451.3948583-2-tero.kristo@linux.intel.com

Cc: stable@vger.kernel.org
Fixes: f46b1652 ("trace/hwlat: Implement the per-cpu mode")
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

smatch reports several similar warnings
kernel/trace/trace_osnoise.c:220:1: warning:
  symbol '__pcpu_scope_per_cpu_osnoise_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:243:1: warning:
  symbol '__pcpu_scope_per_cpu_timerlat_var' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:335:14: warning:
  symbol 'interface_lock' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2242:5: warning:
  symbol 'timerlat_min_period' was not declared. Should it be static?
kernel/trace/trace_osnoise.c:2243:5: warning:
  symbol 'timerlat_max_period' was not declared. Should it be static?

These variables are only used in trace_osnoise.c, so it should be static

Link: https://lore.kernel.org/linux-trace-kernel/20230309150414.4036764-1-trix@redhat.comSigned-off-by: Tom Rix <trix@redhat.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>