- 23 Apr, 2021 25 commits
-
-
David Howells authored
Use a single ITER_XARRAY iterator to describe the portion of a file to be transmitted to the server rather than generating a series of small ITER_BVEC iterators on the fly. This will make it easier to implement AIO in afs. In theory we could maybe use one giant ITER_BVEC, but that means potentially allocating a huge array of bio_vec structs (max 256 per page) when in fact the pagecache already has a structure listing all the relevant pages (radix_tree/xarray) that can be walked over. Signed-off-by:
David Howells <dhowells@redhat.com> Tested-By:
Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/153685395197.14766.16289516750731233933.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/158861251312.340223.17924900795425422532.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/159465828607.1377938.6903132788463419368.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/160588535018.3465195.14509994354240338307.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118152415.1232039.6452879415814850025.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161048194.2537118.13763612220937637316.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340411602.1303470.4661108879482218408.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539555629.286939.5241869986617154517.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653811456.2770958.7017388543246759245.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789095005.6155.6789055030327407928.stgit@warthog.procyon.org.uk/ # v6
-
David Howells authored
afs_extract_data() sets up a temporary iov_iter and passes it to AF_RXRPC each time it is called to describe the remaining buffer to be filled. Instead: (1) Put an iterator in the afs_call struct. (2) Set the iterator for each marshalling stage to load data into the appropriate places. A number of convenience functions are provided to this end (eg. afs_extract_to_buf()). This iterator is then passed to afs_extract_data(). (3) Use the new ITER_XARRAY iterator when reading data to load directly into the inode's pages without needing to create a list of them. This will allow O_DIRECT calls to be supported in future patches. Signed-off-by: -
David Howells authored
Log unmarshalling errors reported by the peer (ie. it can't parse what we sent it). Limit the maximum number of messages to 3. Signed-off-by:
-
David Howells authored
Don't truncate the iterator to correspond to the actual data size when fetching the data from the server - rather, pass the length we want to read to rxrpc. This will allow the clear-after-read code in future to simply clear the remaining iterator capacity rather than having to reinitialise the iterator. Signed-off-by:
-
David Howells authored
Stash the key used to authenticate read operations in the afs_read struct. This will be necessary to reissue the operation against the server if a read from the cache fails in upcoming cache changes. Signed-off-by:
-
David Howells authored
Print the afs_operation debug_id when logging an unexpected change in the data version. This allows the logged message to be matched against tracelines. Signed-off-by:
-
David Howells authored
Pass a pointer to the page being accessed into the dirty region helpers so that the size of the page can be determined in case it's a transparent huge page. This also required the page to be passed into the afs_page_dirty trace point - so there's no need to specifically pass in the index or private data as these can be retrieved directly from the page struct. Signed-off-by:
-
David Howells authored
Disable use of the fscache I/O routined by the AFS filesystem. It's about to transition to passing iov_iters down and fscache is about to have its I/O path to use iov_iter, so all that needs to change. Signed-off-by:
-
David Howells authored
Add an alternate API by which the cache can be accessed through a kiocb, doing async DIO, rather than using the current API that tells the cache where all the pages are. The new API is intended to be used in conjunction with the netfs helper library. A filesystem must pick one or the other and not mix them. Filesystems wanting to use the new API must #define FSCACHE_USE_NEW_IO_API before #including the header. This prevents them from continuing to use the old API at the same time as there are incompatibilities in how the PG_fscache page bit is used. Changes: v6: - Provide a routine to shape a write so that the start and length can be aligned for DIO[3]. v4: - Use the vfs_iocb_iter_read/write() helpers[1] - Move initial definition of fscache_begin_read_operation() here. - Remove a commented-out line[2] - Combine ki->term_func calls in cachefiles_read_complete()[2]. - Remove explicit NULL initialiser[2]. - Remove extern on func decl[2]. - Put in param names on func decl[2]. - Remove redundant else[2]. - Fill out the kdoc comment for fscache_begin_read_operation(). - Rename fs/fscache/page2.c to io.c to match later patches. Signed-off-by:
Jeff Layton <jlayton@kernel.org> Tested-by:
Dave Wysochanski <dwysocha@redhat.com> Tested-By:
-
David Howells authored
Add a tracepoint to log internal failures (such as cache errors) that we don't otherwise want to pass back to the netfs. Signed-off-by:
-
David Howells authored
Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by:
-
David Howells authored
Add a helper to do the pre-reading work for the netfs write_begin address space op. Changes v6: - Fixed a missing rreq put in netfs_write_begin()[3]. - Use DEFINE_READAHEAD()[4]. v5: - Made the wait for PG_fscache in netfs_write_begin() killable[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by:
-
David Howells authored
Gather statistics from the netfs interface that can be exported through a seqfile. This is intended to be called by a later patch when viewing /proc/fs/fscache/stats. Signed-off-by:
-
David Howells authored
Add three tracepoints to track the activity of the read helpers: (1) netfs/netfs_read This logs entry to the read helpers and also expansion of the range in a readahead request. (2) netfs/netfs_rreq This logs the progress of netfs_read_request objects which track read requests. A read request may be a compound of multiple subrequests. (3) netfs/netfs_sreq This logs the progress of netfs_read_subrequest objects, which track the contributions from various sources to a read request. Signed-off-by: -
David Howells authored
Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: -
David Howells authored
Add set/end/wait_on_page_fscache() as aliases of set/end/wait_page_private_2(). These allow a page to marked with PG_fscache, the flag to be removed and waiters woken and waiting for the flag to be cleared. A ref on the page is also taken and dropped. [Linus suggested putting the fscache-themed functions into the caching-specific headers rather than pagemap.h[1]] Changes: v5: - Mirror the changes to the core routines[2]. Signed-off-by:
-
David Howells authored
Move the PG_fscache related helper funcs (such as SetPageFsCache()) to linux/netfs.h rather than linux/fscache.h as the intention is to move to a model where they're used by the network filesystem and the helper library, but not by fscache/cachefiles itself. Signed-off-by:
-
David Howells authored
Add interface documentation for the netfs helper library. Signed-off-by:
-
David Howells authored
Make a netfs helper module to manage read request segmentation, caching support and transparent huge page support on behalf of a network filesystem. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Tested-by:
-
David Howells authored
Provide a function, readahead_expand(), that expands the set of pages specified by a readahead_control object to encompass a revised area with a proposed size and length. The proposed area must include all of the old area and may be expanded yet more by this function so that the edges align on (transparent huge) page boundaries as allocated. The expansion will be cut short if a page already exists in either of the areas being expanded into. Note that any expansion made in such a case is not rolled back. This will be used by fscache so that reads can be expanded to cache granule boundaries, thereby allowing whole granules to be stored in the cache, but there are other potential users also. Changes: v6: - Fold in a patch from Matthew Wilcox to tell the ondemand readahead algorithm about the expansion so that the next readahead starts at the right place[2]. v4: - Moved the declaration of readahead_expand() to a better place[1]. Suggested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Filesystems are not currently permitted to modify the number of pages in the ractl. An upcoming patch to add readahead_expand() changes that rule, so remove the check and resync the loop counter after every call to the filesystem. Tested-by:
-
Matthew Wilcox (Oracle) authored
Turn the comments into kernel-doc and improve the wording slightly. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
For readahead_expand(), we need to modify the file ra_state, so pass it down by adding it to the ractl. We have to do this because it's not always the same as f_ra in the struct file that is already being passed. Signed-off-by:
-
David Howells authored
Add three functions to manipulate PG_private_2: (*) set_page_private_2() - Set the flag and take an appropriate reference on the flagged page. (*) end_page_private_2() - Clear the flag, drop the reference and wake up any waiters, somewhat analogously with end_page_writeback(). (*) wait_on_page_private_2() - Wait for the flag to be cleared. Wrappers will need to be placed in the netfs lib header in the patch that adds that. [This implements a suggestion by Linus[1] to not mix the terminology of PG_private_2 and PG_fscache in the mm core function] Changes: v7: - Use compound_head() in all the functions to make them THP safe[6]. v5: - Add set and end functions, calling the end function end rather than unlock[3]. - Keep a ref on the page when PG_private_2 is set[4][5]. v4: - Remove extern from the declaration[2]. Suggested-by:Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
David Howells authored
Add an iterator, ITER_XARRAY, that walks through a set of pages attached to an xarray, starting at a given page and offset and walking for the specified amount of bytes. The iterator supports transparent huge pages. The iterate_xarray() macro calls the helper function with rcu_access() helped. I think that this is only a problem for iov_iter_for_each_range() - and that returns an error for ITER_XARRAY (also, this function does not appear to be called). The caller must guarantee that the pages are all present and they must be locked using PG_locked, PG_writeback or PG_fscache to prevent them from going away or being migrated whilst they're being accessed. This is useful for copying data from socket buffers to inodes in network filesystems and for transferring data between those inodes and the cache using direct I/O. Whilst it is true that ITER_BVEC could be used instead, that would require a bio_vec array to be allocated to refer to all the pages - which should be redundant if inode->i_pages also points to all these pages. Note that older versions of this patch implemented an ITER_MAPPING instead, which was almost the same. Changes: v7: - Rename iter_xarray_copy_pages() to iter_xarray_populate_pages()[1]. Signed-off-by:
-
- 24 Mar, 2021 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fixes from Stephen Boyd: "Three fixes for the Qualcomm clk driver: two for regressions this merge window and one for a long-standing problem that only popped up now that eMMC is being used" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: gcc-sc7180: Use floor ops for the correct sdcc1 clk clk: qcom: rcg2: Rectify clk_gfx3d rate rounding without mux division clk: qcom: rpmh: Update the XO clock source for SC7280
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Hans de Goede: "A set of bug-fixes and some model specific quirks. Summary: - dell-wmi-sysman: A set of probe-error-exit-handling fixes to fix some systems which advertise the WMI GUIDs, but are not compatible, not booting - intel-vbtn/intel-hid: Misc. bugfixes - intel_pmc: Bug-fixes + a quirk to lower suspend power-consumption on Tiger Lake - thinkpad_acpi: misc bugfixes" * tag 'platform-drivers-x86-v5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: intel_pmc_core: Ignore GBE LTR on Tiger Lake platforms platform/x86: intel_pmc_core: Update Kconfig platform/x86: intel_pmt_crashlog: Fix incorrect macros platform/x86: intel_pmt_class: Initial resource to 0 platform/x86: intel-vbtn: Stop reporting SW_DOCK events platform/x86: dell-wmi-sysman: Cleanup create_attributes_level_sysfs_files() platform/x86: dell-wmi-sysman: Make sysman_init() return -ENODEV of the interfaces are not found platform/x86: dell-wmi-sysman: Cleanup sysman_init() error-exit handling platform/x86: dell-wmi-sysman: Fix release_attributes_data() getting called twice on init_bios_attributes() failure platform/x86: dell-wmi-sysman: Make it safe to call exit_foo_attributes() multiple times platform/x86: dell-wmi-sysman: Fix possible NULL pointer deref on exit platform/x86: dell-wmi-sysman: Fix crash caused by calling kset_unregister twice platform/x86: thinkpad_acpi: Disable DYTC CQL mode around switching to balanced mode platform/x86: thinkpad_acpi: Allow the FnLock LED to change state platform/x86: thinkpad_acpi: check dytc version for lapmode sysfs platform/x86: intel-hid: Support Lenovo ThinkPad X1 Tablet Gen 2
-
Linus Torvalds authored
Merge tag 'afs-cachefiles-fixes-20210323' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull cachefiles and afs fixes from David Howells: "Fixes from Matthew Wilcox for page waiting-related issues in cachefiles and afs as extracted from his folio series[1]: - In cachefiles, remove the use of the wait_bit_key struct to access something that's actually in wait_page_key format. The proper struct is now available in the header, so that should be used instead. - Add a proper wait function for waiting killably on the page writeback flag. This includes a recent bugfix[2] that's not in the afs code. - In afs, use the function added in (2) rather than using wait_on_page_bit_killable() which doesn't provide the aforementioned bugfix" Link: https://lore.kernel.org/r/20210320054104.1300774-1-willy@infradead.org[1] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c2407cf7d22d0c0d94cf20342b3b8f06f1d904e7 [2] Link: https://lore.kernel.org/r/20210323120829.GC1719932@casper.infradead.org/ # v1 * tag 'afs-cachefiles-fixes-20210323' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Use wait_on_page_writeback_killable mm/writeback: Add wait_on_page_writeback_killable fs/cachefiles: Remove wait_bit_key layout dependency
-
Christian Brauner authored
Based on discussions (e.g. in [1]) my understanding of cachefiles and the cachefiles userspace daemon is that it creates a cache on a local filesystem (e.g. ext4, xfs etc.) for a network filesystem. The way this is done is by writing "bind" to /dev/cachefiles and pointing it to the directory to use as the cache. Currently this directory can technically also be an idmapped mount but cachefiles aren't yet fully aware of such mounts and thus don't take the idmapping into account when creating cache entries. This could leave users confused as the ownership of the files wouldn't match to what they expressed in the idmapping. Block cache files on idmapped mounts until the fscache rework is done and we have ported it to support idmapped mounts. Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
-
- 23 Mar, 2021 8 commits
-
-
Matthew Wilcox (Oracle) authored
Open-coding this function meant it missed out on the recent bugfix for waiters being woken by a delayed wake event from a previous instantiation of the page[1]. [DH: Changed the patch to use vmf->page rather than variable page which doesn't exist yet upstream] Fixes: 1cf7a151 ("afs: Implement shared-writeable mmap") Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Matthew Wilcox (Oracle) authored
This is the killable version of wait_on_page_writeback. Signed-off-by:
-
Matthew Wilcox (Oracle) authored
Cachefiles was relying on wait_page_key and wait_bit_key being the same layout, which is fragile. Now that wait_page_key is exposed in the pagemap.h header, we can remove that fragility A comment on the need to maintain structure layout equivalence was added by Linus[1] and that is no longer applicable. Fixes: 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Signed-off-by:
-
David E. Box authored
Due to a HW limitation, the Latency Tolerance Reporting (LTR) value programmed in the Tiger Lake GBE controller is not large enough to allow the platform to enter Package C10, which in turn prevents the platform from achieving its low power target during suspend-to-idle. Ignore the GBE LTR value on Tiger Lake. LTR ignore functionality is currently performed solely by a debugfs write call. Split out the LTR code into its own function that can be called by both the debugfs writer and by this work around. Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Reviewed-by:
Sasha Neftin <sasha.neftin@intel.com> Cc: intel-wired-lan@lists.osuosl.org Reviewed-by:
Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Link: https://lore.kernel.org/r/20210319201844.3305399-2-david.e.box@linux.intel.comSigned-off-by:
Hans de Goede <hdegoede@redhat.com>
-
David E. Box authored
The intel_pmc_core driver is mostly used as a debugging driver for Intel platforms that support SLPS0 (S0ix). But the driver may also be used to communicate actions to the PMC in order to ensure transition to SLPS0 on some systems and architectures. As such the driver should be built on all platforms it supports. Indicate this in the Kconfig. Also update the list of supported features. Signed-off-by:
Mario Limonciello <mario.limonciello@dell.com> Link: https://lore.kernel.org/r/20210319201844.3305399-1-david.e.box@linux.intel.comSigned-off-by:
-
David E. Box authored
Fixes off-by-one bugs in the macro assignments for the crashlog control bits. Was initially tested on emulation but bug revealed after testing on silicon. Fixes: 5ef9998c ("platform/x86: Intel PMT Crashlog capability driver") Signed-off-by:
-
David E. Box authored
Initialize the struct resource in intel_pmt_dev_register to zero to avoid a fault should the char *name field be non-zero. Signed-off-by:
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "Two fixes to the kunit tool from David Gow" * tag 'linux-kselftest-kunit-fixes-5.12-rc5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Disable PAGE_POISONING under --alltests kunit: tool: Fix a python tuple typing error
-
- 22 Mar, 2021 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinuxLinus Torvalds authored
Pull selinux fixes from Paul Moore: "Three SELinux patches: - Fix a problem where a local variable is used outside its associated function. Thankfully this can only be triggered by reloading the SELinux policy, which is a restricted operation for other obvious reasons. - Fix some incorrect, and inconsistent, audit and printk messages when loading the SELinux policy. All three patches are relatively minor and have been through our testing with no failures" * tag 'selinux-pr-20210322' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinuxfs: unify policy load error reporting selinux: fix variable scope issue in live sidtab conversion selinux: don't log MAC_POLICY_LOAD record on failed policy load
-
- 21 Mar, 2021 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for v5.12" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: initialize ret to suppress smatch warning ext4: stop inode update before return ext4: fix rename whiteout with fast commit ext4: fix timer use-after-free on failed mount ext4: fix potential error in ext4_do_update_inode ext4: do not try to set xattr into ea_inode if value is empty ext4: do not iput inode under running transaction in ext4_rename() ext4: find old entry again if failed to rename whiteout ext4: fix error handling in ext4_end_enable_verity() ext4: fix bh ref count on error paths fs/ext4: fix integer overflow in s_log_groups_per_flex ext4: add reclaim checks to xattr code ext4: shrink race window in ext4_should_retry_alloc()
-
